HG07525 - Uncategorized PARKSIDE - Free user manual and instructions

Product Type	Tile Leveling System
Brand	Parkside
Model	HG07525
Purpose	Leveling adjacent tiles during installation
Operation	Manual rotation of handle and protection cup
Adjustable T-Needle Depth	Yes, by turning the handle
Locking Mechanism	Rotate handle 90° clockwise to lock T-needle under tiles
Tightening	Rotate protection cup clockwise with included wrench until tiles are level
Tile Thickness Range	6-12 mm (typical)
Materials	Plastic (handle, protection cup) and metal (T-needle)
Dimensions (approx.)	15 cm (length) x 5 cm (width)
Weight (approx.)	0.25 kg
Color	Black/Orange
Included Accessories	T-needles (100 pcs typical), wrench
Maintenance	Clean before cement/adhesive dries; avoid residue buildup
Safety	Handle with care to avoid injury; do not overtighten tiles
Storage	Keep in a dry, clean place
Warranty	2 years (typical)
Country of Origin	China

Frequently Asked Questions - HG07525 PARKSIDE

How do I adjust the T-needle depth?

Hold the product by the protection cup. Turn the handle to adjust how far the T-needle protrudes under the cup.

How do I lock the leveler under the tiles?

Push a T-needle through the joint between 2 tiles. Hold the handle and turn it by about 90° clockwise. This locks the T-needle under the tiles.

How do I tighten the leveler to level tiles?

After positioning several T-needles near intersections, rotate the protection cup clockwise with the included wrench until the two tiles are level.

When should I remove the leveler?

Remove the leveler before the cement or adhesive is completely dry. Turn the protection cup anticlockwise to loosen, then turn the handle anticlockwise by about 90° to unlock the T-needle, and carefully pull the product out of the joint.

Can I reuse the leveler?

Yes, the leveler is reusable. Clean it thoroughly after each use to remove adhesive residue before it dries.

What tile thickness is compatible with the HG07525?

The HG07525 is designed for standard tile thicknesses, typically 6-12 mm. Adjust the T-needle depth accordingly.

How many levelers do I need per square meter?

The quantity depends on tile size and layout. As a general rule, use one leveler at each corner intersection of four tiles, approximately every 30-40 cm.

How do I clean the leveler?

Clean the leveler immediately after use while the adhesive is still wet. Wipe off residues with a damp cloth. If dried, soak in water and scrape gently.

What tools are needed for operation?

The included wrench is used for final tightening. No additional tools are required for basic adjustment and locking.

Is the HG07525 suitable for large format tiles?

Yes, it can be used with large tiles. Use multiple levelers along the edges and intersections to ensure even leveling.

USER MANUAL HG07525 PARKSIDE

Adjusting the T-needle: Hold the product by the protection cup. Turn the handle to adjust how far the T-needle is protruding under the protection cup.

HU

Positioning the product: Push a T-needle through the joint between 2 tiles. Hold the product by the handle and turn the handle by approx. 90°. This locks the T-needle under the tiles. Turn the protection cup clockwise to lightly tighten the product's grip on the tiles.

Before tightening the product firmly: Put several T-needles in place and position them near the intersection of 2 tile joints.

HU

- Tightening the product firmly: Rotate the protection cup clockwise with the wrench until 2 tiles are level. - Removing the product: Before the cement/adhesive is completely dry, turn the protection cup anticlockwise. Once the product no longer has a firm grip, turn the handle anticlockwise by approx. 90^ . This unlocks the T-needle under the tiles. When the T-needle is aligned to the tile joint, carefully pull the product out of the joint.

HU