GUH3C410 - Computer accessory IOGEAR - Free user manual and instructions

USER MANUAL GUH3C410 IOGEAR

Solid green vertical rectangle with no text, symbols, or patterns

Quick Start Guide

4 Port USB-C® Hub

• USB-C port (10 Gbps required for full bandwidth)
• Windows® 8.1, Windows® 10, Windows® 11
• macOS® 10.13+

Overview

2

A. USB-C for Host connection (10 Gbps)
B. 2 x USB-A Ports for USB peripherals (10 Gbps)
C. 2 x USB-C Ports for USB peripherals (10 Gbps)

A MiOGEAR B C

Hardware Installation

3

1 Connect up to 2 USB-A peripherals to USB-A ports like Smartphone, tablet, SSD, or other devices.
2 Connect up to 2 USB-C peripherals to USB-C ports like Smartphone, tablet, SSD, or other devices.
3 Connect your host laptop or computer.

3 3 2 1 SSD

Limited Warranty

Warranty Information

This product carries a 1 Year Limited Warranty. For the terms and conditions of this warranty, go to https://www.iogear.com/support/warranty

Register online at https://www.iogear.com/register

Important Product Information

Product Model ____

Serial Number ____

Contact

WE'RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT?

Make sure you:

1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support

IOGEAR

https://iogear.custhelp.com

[e-mail]

www.iogear.com

Compliance Information

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital service, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications made to this equipment may void the user's authority to operate this equipment. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

A ©MOGEAR B C

https://www.iogear.com/support/warranty

https://www.iogear.com/register

https://iogear.custhelp.com

[e-mail]

www.iogear.com

Information de conformité

https://iogear.custhelp.com [e-mail] www.iogear.com