HCB 6375 SS - Oven TEKA - Free user manual and instructions

USER MANUAL HCB 6375 SS TEKA

Modern kitchen interior with black walls, stainless steel cabinets, and built-in appliances (no visible text or symbols)

User Manual

HCB 6375 SS

ES PT EN FR GR RO PL CZ SK

Simple line drawing of a rectangular tray with internal geometric patterns (no text or symbols)

Bandeja para asar

Line drawing of a rectangular mesh basket with handles (no text or symbols)

Cesta de cocción

Line drawing of a shower inside a rectangular oven with a bucket pouring liquid (no text or symbols)

Notas

Simple line drawing of a container with a rotating arrow (no text or symbols)

Advertencia

Line drawing of a rectangular metal tray with mesh pattern (no text or symbols)

Cesto de Cozimento

Simple line drawing of a rectangular tray with cutouts and a central triangular shape (no text or symbols)

Tabuleiro de grelha

Line drawing of a small object inside a transparent enclosure with a water droplet inside (no text or symbols)

Notas

Simple line drawing of a container with a mesh top and circular arrow indicating rotation (no text or symbols)

Aviso

IMPORTANT SAFETY INSTRUCTIONS

THESE WARNINGS ARE PROVIDED IN THE INTEREST OF SAFETY. PLEASE READ THEM CAREFULLY BEFORE INSTALLING OR USING THE APPLIANCE.

To maintain the EFFICIENCY and SAFETY of this appliance, we recommend:

• Call only the Service Centers authorized by store where you buy the cooker
  • Always use original Spare Parts

• When the oven is first switched on, it may give off an unpleasant smell. This is due to the bonding agent used for the insulating panels within the oven. Please run the new empty product with the conventional cooking function, 250°C, 90 minutes to clean oil impurities inside the cavity.

• During the first use, it is completely normal that there will be slight smoke and door. If it does occur, you should wait for the smell to be cleared before putting food into the oven.
• Please use the product under an open environment.
• The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continuously supervised.
• If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• During use, the appliance becomes very hot. Care should be taken to avoid touching heating elements inside the oven.

• Do not allow children to go near the oven when it is operating, especially when the grill is on.

• Ensure that the appliance is switched off before replacing the oven lamp to avoid the possibility of electric shock.

• The means for disconnection must be incorporated in the fixed wiring in accordance with the wiring specifications.

• Children should be supervised to ensure that they do not play with the appliance.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by person responsible for their safety.

• Accessible parts may become hot during use. Young children should be kept away.

• An all-pole disconnection means must be incorporated in the fixed wiring in accordance with the wiring rules.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they can scratch the surface, which may result in shattering of the glass.

• Only use the temperature probe recommended for this oven.

• A steam cleaner is not to be used.

• The appliance is not intended to be operated by means of an external timer or a separate remote control system.

• The instructions for ovens that have shelves shall include details indicating the correct installations of the shelves.

• Do not use the oven unless you are wearing something on your feet. Do not touch the oven with wet or damp hands or feet.

• For oven: Oven door should not be opened often during the cooking period.
• The appliance must be installed by an authorized technician and put into use. The producer is not responsible for any damage that might be caused by defective placement, and installation by unauthorized personnel.
• When the door or drawer of oven is open do not leave anything on it, or you may unbalance your appliance or break the door.
• Some parts of appliance may keep its heat for a long time; it is required to wait for it to cool down before touching onto the points that are exposed to the heat directly.
• If you will not use the appliance for a long time, it is advised to plug it off.

DECLARATION OF COMPLIANCE

When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. Keep packing materials such as plastic bags, polystyrene, or nails out of the reach of children because these are dangerous to children.

PRODUCT INSTALLATION

If there is any discrepancy between the illustration and the actual product, please refer to the actual product.

Cupboard Diagram (Standing Cupboard)

① Reserve 5 mm for the door panel at the top and bottom respectively.
② Reserve 20 mm for the door panel on the left and right respectively.
③ Reserve 20 mm for the door panel in thickness.

1. The thickness of the cupboard board is 20 mm.
2. If the power socket is installed on the back of the appliance, the depth of the cupboard opening shall be increased from a minimum of 590 mm to 620 mm.
3. The dimensions in the figures are in mm.

Cupboard Diagram (Ground Cupboard)

Without hob

Minimum bottom ventilation area: 250 mm ^2

① Reserve 5 mm for the door panel at the top and bottom respectively.
② Reserve 20 mm for the door panel on the left and right respectively.
③ Reserve 20 mm for the door panel in thickness.

With hob

If the appliance is installed under the hob, the minimum thickness of worktop A is shown below:

Hob type	worktop A
Induction hob 37 mm
Full-surface induction hob 47 mm
Gas hob	30 mm
Electric hob	27 mm

1. The thickness of the cupboard board is 20 mm.
2. If the power socket is installed on the back of the appliance, the depth of the cupboard opening shall be increased from a minimum of 590 mm to 620 mm.
3. The dimensions in the figures are in mm.

Installation Important Instructions

Content that means [mandatory]

1. The safe operation of this appliance can only be guaranteed if it has been installed to a professional standard in accordance with these installation instructions. The installer shall be liable for any damage resulting from incorrect installation.
2. The entire installation process requires two professional installers. Wear dry protective gloves during installation to avoid scratch or electric shock.
3. Fitted units must be heat-resistant up to 90^ C, and adjacent unit fronts up to 70^ C.
4. Please use a 16A socket.

Content that means [prohibit]

1. Do not install the appliance behind a decorative door or the door of a kitchen unit, as this may cause the appliance to overheat.
2. Check the appliance for damage after unpacking it. Do not connect the appliance if it has been damaged in transit.
3. Do not block the vent of the appliance and the gap between the cupboard and the appliance.
4. Use extreme caution when moving or installing the appliance. It is very heavy, do not lift the appliance by the door handle.
5. If the power cord or power plug is damaged, stop using the appliance immediately, to avoid fire, electric shock or other injuries.

⚠️ Content that means [note]

1. Be very careful when moving or installing the appliance to avoid damage to the appliance or damage to the cupboards.
2. Before starting up the appliance, remove all packaging materials and accessories from the cavity.
3. The power socket shall be accessible to users (such as next to the cupboard) for easy power-off.
4. After installation is complete, make sure that the power plug is firmly inserted into the socket.
5. Please refer to the "Cupboard Diagram" for the requirements of net depth of the cupboard. The clearance between the cupboard bottom board and the rear board (or wall) shall not be less than 50 mm.

Installation steps

1. Please customize the cupboard according to the "Cupboard Diagram".
2. Before installation, please check for normal power sockets and appropriate grounding, and check whether the cupboard dimension meets the installation requirements.
3. Place the appliance in designated locations in the kitchen, install it in a vertical cupboard, and connect the power supply.
4. To locate the mounting fixing holes, open the appliance door and look at the side frame of the appliance (position shown above).
5. Fix the appliance on the Cupboard with two screws.

PRODUCT INTRODUCTION

Oven

When removing food, please wear heat insulating gloves to prevent burns!

At the moment of opening the door of the furnace, pay attention to the steam. Please open the door at a small Angle to avoid the steam on your face.

Accessories

Pure wire mesh diagram without any text, numbers, or symbols

Grill rack Grill tray
Grill food or place heat-resistant cooking containers

Clips Small grill rack

Simple line drawing of a rectangular tray with internal geometric patterns (no text or symbols)

Cook large portions of food or catch food scraps

Cook smaller portions of foodRemove the grill
( Only for some models ) ( Only for some models )

Line drawing of a rectangular mesh basket with handles (no text or symbols)

Air fry basket
Air fry function-specific

Slide rail
(Only for some models)

Accessories use (Only for some models)

For the oven to work properly, the grill rack and Grill tray should only be placed between the first and fifth levels. When used together, place the Grill tray under the grill rack.

Control Panel

K1: For selecting oven functions.
K2: For setting the temperature.

Time Setting: For adjusting the cooking time.

Function Function introduction
[TCC2C]Lamp	The cooking process can be observed under illuminated conditions.Except ECO function.
Defrost	The circulation of air at room temperature enables quicker thawing of frozen food (without the use of any heat).
[ASYX]Double grill with fan	The radiant heating element and top heating element are working with fan.
[###]Double grill	The radiant heating element and top heating element are working.
[S###]Single grill	The inner grill element switches on and off to maintain temperature.Can be used to grill a small number of food.
[S###]Conventional+fan	The combination of fan and the top and bottom heating elements provides more even heat penetration and coloration, primarily for cooking meat.
[S###]Conventional	The top and bottom heating elements work together to provide convectional cooking.
[S###]Bottom heating	Heating is provided by heating pipes at the bottom of the oven.Mainly used for keeping warm and the coloring of the food.
[TG4H5]ECO	For energy-saving cooking. Cooking the selected ingredients in a gentle manner, and the heat comes from the top and the bottom.
HC###Water clean	Steam softens food residue or grease in the cavity.
	Provide fast and even heat distribution, the hot air also takes away the moisture on the surface of the food, generating crunchy and crispy frying.

Before using for the first time

1. The oven must not be operated until it has been correctly installed.
2. To avoid fire, remove all transport protection materials and ensure that the oven is free of residual packaging items and accessories (e.g. foam, cardboard, grill tray, grill rack, etc.).
3. Clean the oven cavity and accessories with soapy water and a soft cloth.
4. Open kitchen windows and cooker hoods to maintain high ventilation.
5. Do not let children or pets into the kitchen and close the doors of adjacent rooms.
6. After connecting the power, activate the oven mode, time, and temperature in the table below to remove odors in the cavity.
7. After the first use, please open the oven door at a small angle and wait for the cooling to complete.

Function Temperature Time
Conventional 250°C	0.5-1 Hour

Setting the clock

When the oven is connected to the power supply for the first time, you need to set the clock.

Note: The clock is a 24-hour clock.

1. Press the "⊖" or "⊕" key to adjust the hour setting.
2. Press the " <> "key to confirm the hour setting.
3. Press the "⊖" or "⊕" key to adjust the minute setting.
4. Press the " <> " key to complete the clock setting.

Regular operation

1. Turn knob K1 to select the oven functions.
2. Turn knob K2 to adjust the temperature.
3. Mode setting.
4. When cooking is finished, turn all knobs to the "o" position.

Notes

1. As a separate function, Oven light is used by consumers to actively choose to observe food or clean the cavity. After the user opens it, they need to actively close it before exiting and returning to standby mode.
2. After cooking in the oven, the cooling fan will continue to dissipate heat. The oven will only close when the core temperature is below 75^ C.

Mode setting

In standby mode, press and hold the "◀" key for 3 seconds to enter manual mode, the "###" icon will light up.

Under manual mode, press the "<> " key to enter the time mode selection: manual → minute minder → dur → End → manual.

The automatic cooking modes that can be set are semi-automatic: dur or End.

If the display does not show the icon "###", the oven will not work or heat up.

The oven will only work or heat up if the display shows icon "....".

Notes

1. Manual mode - the cooking time is controlled by the user.
2. Minute minder - you can set an audible reminder for the time period of completion.
3. Dur - you can set the oven so it will cook for a desired time range.
4. End - you can set the oven so it will cook to a desired time.

Manual mode

In manual mode, only the day's time and the symbol "###" lights up. The oven is always in working order and the cooking time is controlled by the user.

Notes

1. In manual mode, after 5 hours of no operation, the displayed time starts to flash. After 10 hours without any operation, return to the standby state.

2. When the time is flashing, if you want to use the manual mode again, please press the "⊖" or "＋" key.

Minute minder

This mode is only used as a reminder function.

1. Press "<<" key to select the minute minder function. The relevant "☐" "■" symbol will flash.

2. Press the "⊖" or "⊕" key to enter the alarm clock time setting (Refer to "Setting the clock").

3. After setting, press the "<<" key to confirm the alarm clock setting, and the "☐" icon is always on.

4. When the time is up, the buzzer beeps to remind you, and the "☐" symbol on the screen begins to blink. At this point, press any key to cancel the reminder.

Cooking dur time

If the dur mode is set for 1 hour, cooking ends after 1 hour.

1. Press the "<> " key continuously until the screen shows "dur".
2. Press the "−" or "+" key to enter the dur mode time setting (Refer to "Setting the clock"). The maximum setting time is 10 hours.
3. After confirming the time setting, press the "<> " key to start. At this time, the icons "###" and "A" are always on.
4. If the dur mode is set for 1 hour, the buzzer sounds after 1 hour to indicate the end of cooking and the icon "A" flashes.
5. At this point, press any key to return to standby, stop the chirping alert and the icon "A" disappears.

Cooking End time

Cooking starts at the current time and ends at the set clock time.

1. Press the "<> " key continuously until the screen shows "End".
2. Press the "⊖" or "⊕" key to enter the End mode time setting (Refer to "Setting the clock").
3. After confirming the time setting, press the "<>” key to start. At this time, the icons "###" and "A" are always on.
4. When the End time is the same as the system clock time, the buzzer will sound, indicating the end of cooking. The icon "###" disappears and the icon "A" flashes.
5. At this point, press any key to return to standby, stop the chirping alert and the icon "A" disappears.

Precautions for timer use

1. When setting the time, press and hold the "⊖" or "⊕" key for 3 seconds to increment or decrement the time continuously.
2. In alarm or automatic cooking mode, press and hold the "⊕" and "<>" keys until the buzzer sounds to cancel all mode settings and enter standby mode.
3. When setting the timer mode, if nothing is done for 5 minutes, it will return to manual mode.
4. When setting each function, press and hold the "<<" key for more than 3 seconds to cancel the current setting and enter manual mode.
5. When setting the timer mode, only one of the alarm clock and automatic cooking modes can be selected.

TOP-BOTTOM+FAN function

1. Turn knob K1 to select the “ ☐ ”.
2. Turn knob K2 to adjust the temperature.
3. Mode setting.
4. When cooking is finished, turn all knobs to the "o" position.

Menu name ModeWeight Time Temperature Preheat
Potato wedges			20min500g 230°C	Yes (250°C)
French Fries	500g		20min Yes (250°C)
Salmon	400g		13min Yes (250°C)
Bacon	200g		7min Yes (250°C)
Fried fish fillet	400g		10min Yes (250°C)

Notes

1. Please put the ingredients in the oven after preheating.
2. Please use a Air fry basket to cook.

CLEANING AND MAINTENANCE

Cleaning

Disconnect the power supply before cleaning and maintenance.

In order to ensure the life of the oven, clean it in time after cooking.

Cleaning steps are as follows:

1. After cooking, wait for the oven to cool completely.
2. Remove oven accessories, rinse with warm water and dry.
3. Remove food residues and oil stains from the oevn cavity.
4. Clean the oven surface with a soft cloth dampened with detergent and dry.
5. Start the water clean function as follows:

1). Add about 250 ml of purified water and an appropriate amount of dish soap to the cavity and stir well.
2). With the oven door closed, turn Knob K1 to the "HYDRO CLEAN" position.
3). Turn knob K2 to the "100°C" position.
4). Select dur mode and set the time to 30 minutes.
5). Press the "<> " key to start.

1. After the water clean function is completed, wait for the oven to cool completely. Then dry the furnace oven cavity with clean absorbent sponge or soft cloth.

Line drawing of a kitchen oven with a water dispenser inside (no text or symbols)

Notes

1. Do not use sharp cleaning tools, hard brush and corrosive cleaning products, so as not to damage the oven and its accessories.
2. Do not use rough scrubbing agent or sharp metal spatula to clean the door glass.

Lamp Replacement

1. Switch off and disconnect the power from the oven. Ensure that the internal parts are cool before touching internal parts.
2. Remove the lamp cover by turning it counter-clockwise (note, it may be stiff), replace the bulb with a new one of the same type.
3. Insert the new bulb, which should be resistant to 300^ C. For replacement bulbs contact your local service centre.
4. If in any doubt, consult a qualified electrician for help.
5. The product contains a light source of energy efficiency class: G.

Simple line drawing of a container with a curved arrow indicating rotation (no text or symbols)

Warning

To avoid electric shocks-please ensure that the electricity supply to the appliance is switched off and the appliance is fully cold. before removing the lamp lens.

TROUBLESHOOTING

If the problem cannot be solved or other problems occur, please contact the after-sales service.

Problem Possible reason Solution
Unable to start	Power is not connected connect power supply
	The main power switch is not turned on	Turn on the power switch
	Oven door not closed Close the oven door
lamp does not come on	It's broken	Contact after-sales service
Has a pungent odor or smoke	first use No processing required
Food is not cooked	Temperature is too low	Use a higher temperature
	Food portion is too large	Cook food in smaller pieces or extend the cooking time.
Burnt or uneven food	The temperature is set too high or the heating time is too long	Adjust the cooking temperature or time
	The food is too close to the heating tube	Adjust the placement layers of accessories
The fan did not stop working after stopping the heating	Fan delays blowing for heat dissipation	No processing required

SPECIFICATIONS

Product Information and Product Information Sheet according to EU and UK Ecodesign and Energy Labelling Regulations

Energy Efficiency Index	81.0
Energy efficiency class A+
Energy consumption with a standard load, conventional mode	0.99kWh/cycle
Energy consumption with a standard load, fan-forced mode	0.68Wh/cycle
Number of cavities	1
Heat source	Electricity
Volume	70L
Type of oven	Built-in Oven
Power Supply 220-240V~, 50Hz-60Hz
Electric Power 3.0kW

ENERGY CONSUMPTION

Product information for power consumption and maximum time to reach applicable low power mode.

Standby mode	0.8 W
The maximum time needed for the oven to automatically reach the applicable low power mode or condition	20 minutes

PRODUCT RECYCLING

This symbol on the product or instruction manual indicates that your device should be disposed of separately from your household waste at the end of its useful life.

There is a separate recycling system locally for recycling. For more information, please contact the local authority or retailer where you purchased the product.

When you have unpacked the oven, make sure that it has not been damaged in any way. If you have any doubts at all, do not use it: contact a professionally qualified person. Keep packing materials such as plastic bags, polys tyren, or nails out of the reach of children because these are dangerous to children.

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

CES AVERTISSEMENTS SONT FOURNIS DANS L'INTÉRÊT DE LA SÉCURITÉ.

VEUILLEZ LES LIRE ATTENTIVEMENT AVANT D'INSTALLER OU D'UTILISER

L'APPAREIL. Pour maintenir l'EFFICACITÉ

DÉCLARATION DE CONFORMITÉ

INSTALLATIONDUPRODUIT

INTRODUCTION DU PRODUIT

Four

Pure wire mesh diagram of a rectangular metal grate structure (no text or symbols)

Grille de cuisson

Line drawing of a rectangular mesh basket with handles (no text or symbols)

Panier de cuisson

Simple line drawing of a rectangular tray with cutouts and a central triangular shape (no text or symbols)

Plaque de cuisson

Line drawing of a laboratory or storage unit with internal grid structure (no text or symbols)

Simple line drawing of a cylindrical object inside a rectangular chamber with grating (no text or symbols)

Simple line drawing of a storage tray with six small cups inside, enclosed in an enclosure (no text or symbols)

Panneau de contrôle

Line drawing of a small object inside a transparent enclosure with a handle, no text or symbols present

Notes

Simple line drawing of a container with a circular arrow indicating rotation (no text or symbols)

Avertissement

RECYCLAGE DU PRODUIT

Line drawing of a rectangular mesh basket with handles, no text or symbols present

Καλάθι μαγειρέματος

Simple line drawing of a rectangular tray with cutouts and internal geometric shapes (no text or symbols)

Ταψί ψησίματος

Line drawing of a laboratory or storage unit with a grid-patterned tray inside (no text or symbols)

Simple line drawing of a cylindrical object inside a rectangular chamber with grating (no text or symbols)

Diagram of a laboratory setup with a tray holding multiple small vials, enclosed in a rectangular chamber (no text or labels)

Πίνακας Ελέγχου

Line drawing of a laboratory setup with a funnel inserted into a chamber (no text or symbols)

Σημειώσεις

Simple line drawing of a mechanical component with a rotating arrow (no text or symbols)

Προειδοποίηση

Line drawing of a rectangular basket with mesh pattern (no text or symbols)

Cooking Basket TOP-BOTTOM+FAN function-specific

Simple line drawing of a rectangular tray with cutouts and a central pan (no text or symbols)

Tavă

Line drawing of a laboratory or storage unit with internal mesh structure (no text or symbols)

Simple line drawing of a cylindrical object inside an open oven with grating (no text or symbols)

Simple line drawing of a laboratory storage unit with a tray holding six small vials (no text or symbols)

Panoul de control

Line drawing of a kitchen oven with a water dispenser inside (no text or symbols)

Observații

Simple line drawing of a bowl with a circular arrow indicating rotation (no text or symbols)

Avertizare

Line drawing of a rectangular metal tray with mesh pattern (no text or symbols)

Kosz do gotowania

Simple line drawing of a rectangular tray with cutouts and a central triangular shape (no text or symbols)

Taca do grillowania

Line drawing of a simple kitchen appliance with a grid-patterned tray and side panels (no text or symbols)

Simple line drawing of a cylindrical object inside a rectangular chamber with grating (no text or symbols)

Diagram of a laboratory storage unit with multiple cups on a tray (no text or labels)

Panel sterowania

Line drawing of a laboratory setup with a central device and an empty chamber (no text or symbols)

Uwagi

Simple line drawing of a container with a rotating arrow, no text or symbols present

Ostrzeżenie

Line drawing of a rectangular mesh basket with handles (no text or symbols)

Simple line drawing of a rectangular tray with a central triangular shape and side slots (no text or symbols)

Line drawing of a simple indoor storage unit with a grid-patterned tray and ventilation slots (no text or symbols)

Simple line drawing of a cylindrical object inside a rectangular chamber with grating (no text or symbols)

Diagram of a storage tray with six small containers inside an enclosure (no text or symbols)

Ovládací panel

Line drawing of a kitchen oven with a water dispenser inside (no text or symbols)

Poznámky

Simple line drawing of a bowl with a circular arrow indicating rotation (no text or symbols)

Varování

Line drawing of a rectangular mesh basket with handles (no text or symbols)

Kôš na varenie

Simple line drawing of a rectangular tray with cutouts and a central triangular shape (no text or symbols)

Hlboký tanier

Line drawing of a laboratory setup with a funnel inserted into a chamber (no text or symbols)

Poznámky

Simple line drawing of a container with a mesh top and circular arrow indicating rotation (no text or symbols)

Upozornenie

Country Subsidiary Address City Phone

AustriaKüppersbusch Austria	Eitnergasse, 13	1231 Wien	[phone]
BelgiumKüppersbusch Belgium S.P.R.L.	Doomveld Industrie, Asse 3, No. 11 - Boite 7	1731 Zellik	[phone]
BulgarlaTeka Bulgaria EOOD	Blvd. "Tsarigradsko Shosse" 135	1784 Sofia	[phone]
ChileTeka Chile S.A.	Avd El Retiro Parque los Maitenes, 1237. Parque Enea	Pudahuel, Santiago de Chile	[phone]
ChinaTeka International Trading (Shanghai) Co. Ltd.	No.1506, Shengyuan Henghua Bldg. No.200 Wending Rd.	Xuhui, Dist. 200030 Shanghai	[phone]
Czech RepublicTeka CZ S.R.O.	V Holesovickách, 593	182 00 Praha 8 - Liben	[phone]
EcuadorTeka Ecuador S.A.	Parque Ind. California 2, Via a Daule Km 12	Guayaquil	[phone]
GreeceTeka Hellas A.E.	Thesi Roupaki - Aspropyrgos	193 00 Athens	[phone]
HungaryTeka Magyarország Zrt.	Terv u. 92	9200 Mosonmagyaróvár	[phone]
IndonesiaPT Teka Buana	Jalan Menteng Raya, Kantor Taman A9 Unit A3	12950 Jakarta	[phone]
MalaysiaTeka Küchentechnik (Malaysia) Sdn Bhd	10 Jalan Kartunis U1/47, Temasya Park, Off Glenmarie	40150 Shah Alam, Selangor Darul Ehsan	[phone]
MexicoTeka Mexicana S.A. de C.V.	Blvd Manuel A. Camacho 126, Piso 3 Col. Chapultepec	11000 Mexico D.F.	[phone]
MoroccoTeka Maroc S.A.	73, Bd. Slimane, Depôt 33, Route de Ain Sebaa	Casablanca	[phone]
PeruTeka Küchentechnik Perú S.A.	Av. El Polo 670 local A 201, CC El polo, Surco	Lima	[phone]
PolandTeka Polska Sp. ZO.O.	ul. 3-go Maja 8 / A2	05-800 Pruszkow	[phone]
PortugalTeka Portugal S.A.	Estrada da Mota - Apdo 533	3834-909 Ilhavo, Aveiro	[phone]
RomaniaS.C. Teka Küchentechnik Romania S.R.L.	Sevastopol str., no 24, 5th floor, of. 15	010992 Bucharest Sector 1	[phone]
Russia/RocciaTeka Rus LLC/000 "Teka Pyc"	Neverovskogo 9, Office 417, 121170, Moscow, Russia	121087 Россия, Москва	[phone]
SingaporeTeka Singapore PTE Ltd	Clemenceau Avenue, 83, 01-33/34 UE Square	239920 Singapore	[phone]
SpainTeka Industrial, S.A.	C/ Cajo,17	39011 Santander	[phone]
ThailandTeka (Thailand) Co. Ltd.	364/8 Sri-Ayuttaya Road, Phayathai, Ratchatavee	10400 Bangkok	[phone]
TurkeyTeka Teknik Mutfak Aletleri Sanayi Ve	Büyükdere Cad. 24/13	80290 Mecidiyeköy, Istanbul	[phone]
UkraineTeka Ukranic LLC	86-e, Bozhenko Str .2nd floor,4th entrance	03150 Kyiv	[phone]
United Arab EmiratesTeka Middle East Fze	Building LOB 16, Office 417	P.O. Box 18251 Dubai	[phone]
United Arab EmiratesTeka Küchentechnik U.A.E LLC	Bin Khedia Centre	P.O. Box 35142 Dubai	[phone]
VenezuelaTeka Andina S.A.	Ctra. Petare-Santa Lucia, km 3 (El Limoncito)	1070 Caracas	[phone]
VietnamTEKA Vietnam Co., Ltd.	803, Fl 8th, Daiminh Convention Center, 77, Hoang Van	Thai, Tan Phu Ward, District 7, Ho Chi Minh	[phone]

PN:16171100A46821

Teka Industrial S.A.

"for further information and updated contact adresses,

please refer to the corporate website"

teka.com

World map silhouette showing continents and countries with no text or labels

teka.com

Asped mos eriatius sit atet hicil et velit