PC-WKS 1321 - Kettle PROFICOOK - Free user manual and instructions

USER MANUAL PC-WKS 1321 PROFICOOK

Modern stainless steel water heater with black handle and blue base, no visible text or symbols on the body.

Be sure to read the separately enclosed safety instructions first.

Instruction Manual

Thank you for choosing our product. We hope you will enjoy using the appliance.

Read the instruction manual and the separately enclosed safety instructions very carefully before using this appliance. Keep these documents, including the warranty certificate, receipt and, if possible, the box with the inner packaging in a safe place. If you pass the appliance on to a third party, always include all the relevant documents.

Symbols in this Instruction Manual

Important information for your safety is specially marked. It is essential to comply with these instructions in order to avoid accidents and prevent damage to the appliance:

WARNING:

This warns you of dangers to your health and indicates possible injury risks.

CAUTION:

This refers to possible hazards to the appliance or other objects.

Unpacking the Appliance

1. Remove the appliance from its packaging.
2. Remove all packaging material, such as foils, filling material, cable ties and cardboard packaging.
3. Check the appliance for possible transport damage to avoid hazards. Do not operate a damaged appliance. Return it to the dealer immediately.
4. There may still be dust or production residues on the appliance. We recommend that you clean the appliance as described under "Cleaning".

Overview of the Components

1 Spout
2 Lid
3 Self-closing filler opening
4 Handle for lifting the lid
5 Handle
6 Water level indicator
7 On / off switch
8 Control lamp
9 Base

Warnings for the Use of the Appliance

WARNING: Risk of Burns!

• Do not open the lid while the water is boiling.
  • Always make sure that the lid is firmly closed.
• The housing becomes hot during operation! Do not touch the appliance and allow it to cool down before putting it away.

CAUTION: Overload!

• If an extension lead is used, it should have a cable cross-section of at least 1.5 ~mm^2 .
• Do not use a multiple socket as this appliance is too powerful.

CAUTION:

• Always switch off the appliance before removing it from the base! The contacts on the base are unsuitable for interrupting the power supply.
• Make sure that the appliance is switched off when you put it back on the base!

Notes for Use

Mains Cable

Unwind the required mains cable completely from the underside of the base. Ensure that the mains cable is routed correctly.

Connected Load

The appliance has a total power consumption of 2200 W. With this connected load, a separate supply line with a 16 A household circuit breaker is recommended.

Electrical Connection

1. Check that the mains voltage matches that of the appliance. The details can be found on the rating plate on the base.
2. Only connect the appliance to a properly installed earthed socket.

Switching the Appliance On/Off

- Switch On:

To switch on, set the switch to position I. The control lamp lights up.

- Switch Off:

To switch off, set the switch to position O. The control lamp goes out.

Preparation

Before using the appliance for the first time, boil it three times with fresh water. Only use clear water without additives.

Operation

1. Place the appliance on a level surface.
2. Fill in clear water through the filler opening (maximum 1.7 litres). The fill level can be read from the water level indicator inside the appliance.
3. You do not need to remove the lid to fill in water. There is a self-closing filler opening in the lid. The flap opens automatically when water pressure is applied.
4. Always use fresh, cold water.
5. The water level must be between the MIN and MAX mark.
6. Close the lid. Always make sure that the lid is firmly closed.
7. Place the kettle flush on the base.
8. Switch the appliance on with the switch. The control lamp lights up.

Interrupting/Cancelling Operation

There are two ways to interrupt or stop the boiling process:

1. The appliance switches off automatically after the cooking process. The control lamp goes out.
2. To end or interrupt the cooking process prematurely, set the switch to the 0 position.
3. Always switch off the appliance before removing it from the base! The contacts on the base are unsuitable for interrupting the power supply.
4. Make sure that the appliance is switched off when you put it back on the base!

- Disconnect the mains plug from the socket.

• Empty the water tank.
• Only hold the appliance by the handle.
• Keep the lid closed when pouring.
• Only open the lid with the lever in the lid.

- The housing becomes hot during operation! Do not touch the appliance and allow it to cool down before putting it away.

Cleaning

WARNING:

• Always switch off the appliance before cleaning and disconnect the mains plug from the socket. Wait until the appliance has cooled down.
• Do not immerse the appliance or the base in water. This could lead to an electric shock or fire.

CAUTION:

• Do not use a wire brush or other abrasive objects.
• Do not use harsh or abrasive cleaning agents.
• Clean the perforated surface of the spout opening from the inside with a nylon brush.
• Rinse out the water container with clear water. Dry it with a cloth.
  • After use, clean the housing with a slightly damp cloth.

Descaling

• The intervals between descaling depend on the hardness of the water and the frequency of use.

• If the appliance switches off before the water boils, descaling is necessary.

• Do not use vinegar, but a commercially available descaling agent based on citric acid. Please dose according to the instructions.

• After descaling, boil fresh water several times (approx. 3 to 4 times) to remove residues. Do not use this water for consumption.

Storage

• Clean the appliance as described and allow it to dry completely.
• We recommend storing the appliance in its original packaging if you do not intend to use it for a longer period of time.
• Always store the appliance out of the reach of children in a well-ventilated and dry place.

Winding Device for Mains Cable

You can wind up the mains cable on the base section.

Troubleshooting

Problem Possible Cause Remedy
The appliance has no function. The appliance has no power supply. Check the power socket with another appliance.
The appliance has not cooled down sufficiently after operating without or with too little water.		Allow the appliance to cool down for 15 minutes.
The appliance switches off before cooking.	The heating base is too heavily calcified or the electrical circuit of the socket is overloaded.	Descale according to the instructions.
		Check the mains connection.
The appliance does not switch off. The lid is not closed. Close the lid until it clicks into place.
The appliance switches on again automatically when it is placed on the base.	The switch is in position I.	Set the switch to position O.

Technical Data

Model: PC-WKS 1321

Power supply: 220–240 V\~, 50–60 Hz

Power consumption: 1850–2200 W

Power consumption in off-mode: ....≤0.3W

Protection class:....I

Net weight: .... approx. 0.9 kg

The right to make technical and design modifications in the course of continuous product development remains reserved.

This appliance has been tested according to all applicable, current CE directives and built according to the latest safety regulations.

Disposal

Meaning of the "Dustbin" Symbol

Protect our environment: do not dispose of electrical equipment in the domestic waste.

Please return any electrical equipment that you will no longer use to the collection points provided for their disposal.

This helps avoid the potential effects of incorrect disposal on the environment and human health.

This will contribute to the recycling and other forms of re-utilisation of electrical and electronic equipment.

Information concerning where the equipment can be disposed of can be obtained from your local authority. Your dealer and contractual partner is also obliged to take back the old appliance free of charge.

BELANGRIJK:

WAARSCHUWING: Verbrandingsgevaar!

CTC Clatronic Sp. z o.o

Ul. Brzeska 1

45-960 Opole

Usuwanie