MLW-27 - Hair Dryers MPM - Free user manual and instructions

USER MANUAL MLW-27 MPM

EN We wish you satisfaction from using the product and invite you to check a wide range of other MPM appliances.

Close-up of a metallic cylindrical device with a looped top and textured base, connected to a cable (no visible text or symbols)

MLW-27

FENAKUJMA

FAARTHOCKNERUNDLOCKENSIAB

TOONJATOKIRLHR

21E NSJ-HPAZ MAMION KA MIOYKA

HAIR DRYLER AND CURLER

Diagram of two laboratory devices with numbered components and labeled parts, likely for a scientific or medical study.

Close-up of a hair roller with coiled orange fiber and metallic bands (no text or symbols visible)

Brushless motor: 110,000 r.o.m. / 3-stage air blow and temperature settings / Ionization / 360° rotating power cord (1,8 m) / 2 aluminium coated curling attachments for Coanda-effect

BEZPEČNOSTNÍ POKYNY PŘI POUŽÍVÁNÍ

• Read the instructions carefully before use.
• Do not handle the device with wet hands.
• Take special care when children are near the device.
• Do not use the device for purposes other than those for which it was intended.

- Do not immerse the device, cable or charger in water or other liquids.

- Do not leave the device unattended during operation.

- Always remove the plug from the mains socket when not in use or before cleaning.

- Never use a damaged device, including one with a damaged cord or plug, in which case have it repaired at an authorised service centre.

- Do not use the device outdoors.

- Do not hang the power cable on sharp edges or allow it to come into contact with hot surfaces.

- Do not place the device neither on hot surfaces, nor in close proximity of other electric devices, e.g. cookers, burners, ovens, etc.

- The device should be put on a dry, flat and stable surface.

- The device is intended for domestic use only.

- Always ensure that all parts of the device are correctly fitted before starting work.

- Use of accessories not recommended by the manufacturer may cause damage to the device, fire or personal injury.

- This equipment may be used by children of at least 8 years of age and by persons of diminished physical, mental capacity and lack of experience and knowledge of the equipment if supervision or instruction is provided regarding the safe use of the equipment so that the hazards involved are understood. Unsupervised children should not perform cleaning and maintenance of the equipment.

- The device is not a toy and should not be used as such by children.

- Keep the device and its cord out of reach of children under 8 years of age.

- Do not pull the plug out of the power socket by pulling the cord.

- The equipment is not designed to operate using external timers or a separate remote control.

- Do not connect the plug to the power socket with wet hands. - For the safety of children, please do not leave freely accessible parts of the packaging (plastic bags, cardboard boxes, polystyrene, etc.).

-WARNING! Do not allow children to play with the film. Danger of suffocation!

-Check that the power parameters on the device's rating plate correspond to the parameters of your power supply network.

-CAUTION! Before starting cleaning and maintenance works, disconnect the device from the power supply network and wait until it cools down completely after work. Do not submerge the device into water!

-CAUTION! Do not use sharp objects, abrasive polishes, solvents or other strong chemicals for cleaning since their use may cause damages to the device.

-Keep the appliance away from water!

-Do not use when taking a bath/shower!

- If the device accidentally falls into water, immediately disconnect the plug from the power socket!

- While drying, be careful not to let hair become caught in the air inlet and outlet holes.

-Do not direct hot air towards the eyes or other sensitive areas of the body.

-Do not wind the power cord around the device!

-The air outlet and air inlet openings must not be covered!

-For additional protection, it is advisable to install a residual current device (RCD) with a rated residual current not exceeding 30mA in the electrical circuit that supplies the bathroom. A specialist electrician should be consulted in this regard.

-When using the hair dryer in the bathroom, disconnect it from the power source after use, as the proximity of water is constituted a hazard, even when the device is turned off.

WARNING! Do not use this equipment near water. WARNING! Do not use this equipment near bathtubs, showers, swimming pools and similar water tanks.

DESCRIPTION OF THE APPLIANCE

1. Blowing speed indicator
2. Housing
3. Blowing temperature indicator
4. Locking slider
5. Blowing speed control button
6. Drying attachment
7. Blowing temperature control button
8. Oval brush
9. ON/OFF button
10. Round brush
11. Power cable
12. Right-hand curl cap
13. Air outlet cover
14. Left-hand curl cap

BEFORE FIRST USE

1. Remove the device from the box, remove all bags, labels, cardboard profiles and fillers. Make sure the appliance has not been damaged during transport. Contact the seller in case of any doubts.
2. Make sure the electrical mains parameters match the technical data on the appliance's rating plate.

USING THE DRYER

1. Match the cap of your choice to the curler-dryer. Make sure that the groove of the cap and the hook of the body are aligned with respect to each other. Insert the hair styling tip into the cap, then turn it counterclockwise. To remove the tip press the lock slider, then turn the tip to the right side.

2. Press the ON/OFF button to start the device.

3. Use the speed control button to select the blowing speed:

▶ light air blow
▶ medium air blow
▶ strong air blow

1. Use the blowing temperature control button to select the blowing temperature:

▶ cool air blow
▶ lukewarm air blow
▶ warm air blow
▶ hot air blow

1. When drying is complete, press the ON/OFF button and disconnect the device from the power source.

Use high settings to dry your hair and low settings to style it.

The device is equipped with an air ionization function. Thanks to this feature, negative ions are released when the device is turned on, which, settling on the hair, cause positive charges to be neutralized. As a result, hair does not electrify, and individual strands are smoothed out.

CAUTION! During use, do not cover the air inlet grille, which is located at the back of the dryer, as the device can then easily overheat.

The dryer has an overheating protection system – in case of clogging air outlet holes or overheating will automatically turn off. Disconnect the device from the power supply and wait about 10-15 minutes for it to cool down before restarting.

CLEANING AND MAINTENANCE

The device should be kept clean in order to ensure its proper functioning. Follow the rules below before cleaning.

1. Always disconnect the device from the power supply after use.
2. After the dryer has cooled down, wipe the outer part of the casing with a damp cloth.
3. Do not wrap the cord around the appliance, instead wind it loosely at the side.
4. To clean the filter, turn the filter cover counterclockwise. Remove it from the device.
   Use a cloth or soft brush to remove any debris from both the filter grille and its cover.
5. Install the filter cover back into place by turning it clockwise.

CAUTION! Do not use sharp objects, abrasive polishes, solvents or other strong chemicals for cleaning since their use may cause damages to the device.

TECHNICAL DATA

Model	MLW-27
Power supply 220-240V ~ 50-60HZ
Power 1200-1400W
Off and standby modes available availability
Standby power consumption 0,271W
Power consumption in off-mode -
Power consumption in network standby mode	-
Automatically enters standby mode after	-
Automatically enters shutdown mode after	-
Network standby mode if the device has an app connection function	-
Length of mains cable	1,8 M

CAUTION! MPM agd S.A. reserves the right to technical changes.

Proper disposal of the product (waste electrical and electronic equipment)

Marking on the product indicates that after the service-life of the product expires, it should not be disposed with other type of municipal waste. Used equipment may have a negative impact on the environment and health of people due to potentially containing hazardous substances, mixtures and components. Mixing electric waste with other types of waste or disassembling those in an unprofessional manner may cause a release of substances that are hazardous to the environment and health.

Used equipment should be handed-over to a point for collection of electric waste. In order to obtain detailed information regarding the electric waste collection points, the user should contact the municipal point of electric waste collection or used equipment processing department.

BESCHRIJVING VAN HET APPARAAT

Line drawing of a vacuum cleaner with a handle and spout (no text or symbols)

Legible signature of the buyer