YLW6342-C - Vacuum Cleaner Vevor - Free user manual and instructions

Find the device manual for free YLW6342-C Vevor in PDF.

Vevor YLW6342-C - Vacuum Cleaner
📄 128 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Vevor YLW6342-C - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Vevor
Model YLW6342-C
Product type Vacuum cleaner
Power supply AC 220-240 V, 50-60 Hz
Rated power 1200 W
Protection class Class II (double insulation)
Protection rating IPX4
Tank capacity 30 L
Suction type Dry and wet
Included accessories Universal wheels, hose, two tubes, floor brush, 2-in-1 nozzle, small brush, foam filter
Main functions Vacuuming, blowing, water drainage
Suction adjustment Variable via motor speed control
Recommended continuous use time 20 minutes maximum
Maintenance and cleaning Clean the tank after each use, rinse the filter with clean water once a month
Safety Unplug before maintenance, do not use outdoors, keep out of reach of children
Repairability Contact Vevor technical support for any repairs
Country of manufacture China (Shanghai)

Frequently Asked Questions - YLW6342-C Vevor

What to do if the motor does not start?
Check that the plug is properly connected, that the socket is powered, and that the vacuum switch is set to I. If nothing, contact customer service.
Why is the suction reduced?
Check if the tube or accessories are clogged, if the tank is full, or if the filter is blocked. Clean or replace the filter if necessary.
The motor is overheating, what should I do?
Continuous use should not exceed 20 minutes. Let the device cool down. If overheating persists, clean the filter and tank.
How to clean the tank?
Open the lid, remove the filter bag, tilt the barrel to empty the dust, then clean with clean water and dry.
How often should I clean the filter?
It is recommended to rinse the filter with water once a month and dry it completely before putting it back.
Can I vacuum water with this vacuum?
Yes, the vacuum is suitable for dry and wet. Use the appropriate nozzle to suction liquids.
The power cord is damaged, can I repair it?
No, the cord must be replaced by the manufacturer, its after-sales service, or a qualified person to avoid any danger.
How to use the blowing function?
Insert the hose connector into the air outlet provided for this purpose. The blowing function is then available.
Can I leave the vacuum plugged in permanently?
No, always unplug the plug after use or when not using for a long period.
Can children use this vacuum?
This appliance can be used by children aged 8 and above under supervision. Children must not play with the appliance nor clean it without supervision.

User questions about YLW6342-C Vevor

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Vacuum Cleaner in PDF format for free! Find your manual YLW6342-C - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. YLW6342-C by Vevor.

USER MANUAL YLW6342-C Vevor

Technical Support and E-Warranty Certificate

www.vevor.com/support

WET & DRY VACUUM CLEANER

Model: YLW6342-C

Capacity: 30L

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

YLW6342-C

Technical line drawing of a mechanical device with mounting flanges and internal components, no text or symbols.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

Vevor YLW6342-C - NEED HELP? CONTACT US! - 1Warning-To reduce the risk of injury, user must read in manual carefully.
Vevor YLW6342-C - NEED HELP? CONTACT US! - 2CORRECT DISPOSALThis product is subject to the provision of European D 2012/19/EC. The symbol showing a wheelie bin cross through indicates that the product requires separate re collection in the European Union. This applies to the and all accessories marked with this symbol. Products as such may not be discarded with normal domestic w must be taken to a collection point for recycling electr electronic devices

Warning:

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • This appliance shall state that the plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
  • The plug must be removed from the socket-outlet before cleaning or maintaining the appliance.
  • Do not use it outdoors or on wet surfaces.
  • Use only as described in this manual. Use only the manufacturer's recommended attachments.
  • Do not use a damaged cord or plug. If the appliance is not working properly, has been dropped, damaged, left outdoors, or dropped into

water, please return it to a service center.

  • Do not pull or carry by cord, do not use cord as a handle, or pull around sharp edges or corners. Do not run this vacuum over the cord. Keep the cord away from heated surfaces.
  • Do not unplug by dragging the cord. To unplug, grasp the plug, not the cord.
  • Do not use the plug or the vacuum with wet hands. • SERVICING OF DOUBLE-INSULATED APPLIANCES

Vevor YLW6342-C - Warning: - 1

A double-insulated appliance is marked with one or more of the following: the words "DOUBLE INSULATION" or "DOUBLE INSULATED" or the double insulation symbol (square within a square).

In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated appliance must be identical to the parts they replace.

SAVE THESE INSTRUCTIONS

PART LIST

When unpacking this product, ensure the parts listed below are included and carefully inspect for any damage that may have occurred during shipping. Do not attempt to assemble or use the product if any part is missing or damaged.

NOPICTUREPART NAMEQTY
1Vevor YLW6342-C - PART LIST - 1Vacuum Cleaner1
Vevor YLW6342-C - PART LIST - 2Universal Wheel4
Vevor YLW6342-C - PART LIST - 3Hose Assembly1
Vevor YLW6342-C - PART LIST - 4Connected Tube2
Vevor YLW6342-C - PART LIST - 5Floor Brush1
Vevor YLW6342-C - PART LIST - 62 in 1 Nozzle1
Vevor YLW6342-C - PART LIST - 7Small Brush1
Vevor YLW6342-C - PART LIST - 8Foam Filter1

SAVE THIS MANUAL

ModelYLW6342-C
Rating(s)AC220-240V 50-60Hz
Power Supplier1200 W
Protection Against Electric ShocClass II
Degree Of Protection:IPX4
Capacity30L

WARNING

Technical line drawing of a mechanical device with a bottle and fire symbol, no text or labels.

Technical line drawing of a mechanical device with a cable and switch, no text or symbols.

Simple line drawing of a hand holding a droplet with a cross mark, no text or symbols.

2. When plugging and

1. Do not use the vacuum cleaner near flammable or explosive liquids and gases to avoid fires. When plugging the power plug, please turn off the power switch first to prevent risks of fires or electric shocks. 3. Do not touch the power plug with wet hands to prevent electric shocks.

shocks.

Technical line drawing of a mechanical device, no visible text or symbols.

Line drawing of a mop and cleaning tools on a tiled floor, no text or symbols.

Diagram of a curved structural element with ribbed texture and a broken section, no text or symbols.

4. Non-professionals are

not allowed to start the 5. In order to avoid fire

repair of this appliance. electric shocks, in the

its electronic components cleaning of this appliance

are damaged, they must be careful not to let the

be replaced by body inhale blades, tinde

professionals from the metal powder, etc., which

manufacturer, the will damage the filter

maintenance department assembly and short-circuit

or similar departments of the motor.

order to avoid risks.

  1. Do not bend, trample, or pull the hose. If the hose is damaged, do not continue to use it.

Illustration of a robot with floating objects and children observing, no text or symbols.

Line drawing of a portable air conditioner unit and a portable stove, both without any text or symbols.

Line drawing of a bucket pouring liquid into a container, no text or symbols.

  1. Do not allow children to play with the vacuum cleaner. Do not allow the power cord and the vacuum cleaner and its components, such as extension tubes, to be close to heat sources, so as to prevent deformation of the body and accidents or fires.
  2. When the dust collector is full,

please open it correctly for cleaning. Do not use the vacuum cleaner when the dust collector or HEPA is not installed.

Line drawing of a pipe fitting with multiple tubes and a cross symbol, no text or labels.

Technical line drawing of a mechanical device, no visible text or symbols.

Line drawing of a mop cleaning debris on a tiled floor, no text or symbols.

  1. Please use a power strip for currents above 15A. Using multiple electrical appliances on one power strip at the same time may cause fires.
  2. Please remember to unplug the power plug when you do not use the appliance for a long time. Please do not leave it when the power is on.
  3. Please do not inhale hair balls, large paper pieces, or other items, otherwise it is easy to block the vacuum. If there is a blockage, please clean it up in time.

Line drawing of a vacuum cleaner with warning symbols indicating mechanical stress or damage, no text or labels.

Line drawing of a vacuum cleaner with attached electrical shock symbol and hand gesture, no text or labels.

  1. As the extension tube and the body may generate static electricity during the course of use of the vacuum cleaner, please pay attention to it when using the appliance. Do not allow the power cord to be caught in the door crack or to pull the power cord to prevent damage to the power supply.

INSTALLATION PROCESS

Technical line drawing of a vacuum cleaner with internal components and a close-up inset showing the valve mechanism (no text or symbols).

Technical line drawing of a mechanical component inside a circular frame (no text or symbols).

Line drawing of a curved tool or probe with a straight handle and a threaded end (no text or symbols).

  1. Connection between universal wheels and body: Insert universal wheels into the holes on the bottom of the body and tighten them.

2. Connection between

hose and body.

Insert the hose connector

into the suction and rotate

it to fix it.

3. Connection between hose and tubes.

Top-down schematic of a vehicle with directional arrows indicating movement or flow (no text or symbols).

  1. Tubes connection.

Technical line drawing of a mechanical clamp or bracket component (no text or symbols).

5. Connection between brush and tube.

Technical line drawing of a mechanical tool or bracket component (no text or symbols).

6. Connection between crevice nozzle and tubes.

Line drawing of a paintbrush with a triangular tip, shown in 3D perspective (no text or symbols).

  1. Connection between small brush and hose or tubes.

INSTRUCTIONS FOR USE OF FUNCTIONAL COMPONENTS

Vevor YLW6342-C - INSTRUCTIONS FOR USE OF FUNCTIONAL COMPONENTS - 1Switch buttonPress Switch button to start the vacuum cleaner after the plug is inserted in the socket:-Switch for "l" means power on.-Switch for "0" means power off.
Airflow adjustmentVevor YLW6342-C - INSTRUCTIONS FOR USE OF FUNCTIONAL COMPONENTS - 2Blowing featureFor the suction adjustment device, the suction power can be adjusted by control the speed of motor, which can be adjusted and converted freely, and all vacuumingenvironments can be easily coped with.
Vevor YLW6342-C - INSTRUCTIONS FOR USE OF FUNCTIONAL COMPONENTS - 3Blowing featurePut the hose connector into outlet ,the function is available.
Vevor YLW6342-C - INSTRUCTIONS FOR USE OF FUNCTIONAL COMPONENTS - 4Drain functionTurn on the drain cover and drain water

INSTRUCTIONS FOR USE OF CLEANING

Vevor YLW6342-C - INSTRUCTIONS FOR USE OF CLEANING - 1 Vevor YLW6342-C - INSTRUCTIONS FOR USE OF CLEANING - 2Dust cleaning1.Open the locker, lift up top cover and filter bag.2.Tilt the barrel and pour the dust out.3.Put the top cover and filter bag back to the ba then lock it.
Vevor YLW6342-C - INSTRUCTIONS FOR USE OF CLEANING - 3 Vevor YLW6342-C - INSTRUCTIONS FOR USE OF CLEANING - 4Filter cleaningRemoving the sponge filte and filter bag from the machine.Wash and dry.

Reuse: After cleaning and drying them, they can be installed and used again.

INSTRUCTIONS FOR USE OF ACCESSORIES

Line drawing of a mop handle with water spray and bubbles (no text or symbols).

Floor brush

Mainly used to absorb water stains on the ground.

Pure technical line drawing of a mechanical bracket or pipe joint without any text, numbers, or symbols.

2-in-1 Nozzle

Mainly used for vacuuming corners, narrow gaps, etc.

Scientific Use, Maintenance and Cleaning of the Vacuum Cleaner

  1. In order to prolong the service life of the vacuum cleaner, it is recommended that the continuous use time shall not exceed 20 minutes.
  2. In order to prolong the service life of the dust collector, it is recommended to clean up the trash in the dust collector in time after use, rinse it with clean water, and then dry it.
  3. It is recommended to rinse the filter with clean water once a month and then dry it.
  4. Please wipe the surface of the vacuum cleaner with a dry cloth. If using a damp cloth, prevent water from entering the vacuum cleaner; otherwise, it may cause a short circuit or even burn out the vacuum cleaner.

FAQ

In order to avoid unnecessary losses, you should read the following carefully before contacting vacuum cleaner maintenance.

FaultPossible CauseSolution
The motor does not functioningCheck if the plug of power s is plugged in properly?Check if the outlet of power supply is powered on?Check if the power switch of vacuum cleaner is turned on?Check whether the brushes ar burnt or worn, whether the sw of the vacuum cleaner is damaged or not, etc.Reinsert the plug into the socket.Turn on the switch of socket or replace the socket of power supply.Turn on the switch.Please contact the after-sales maintenance in time.
Reduced suctionCheck if accessories such as suction tube or dust bags are blocked?Check if the dust collector is Is the filter clogged or not?Remove the blockage and clean it in time.Clean the dust collector.Clean the dust filter.
Motor overheatingThe continuous operating time too long, the brushes and commutators are worn, causing to generate too large sparks, much dust to stick to the dus filter, and the dust collector is of dust, etc.You can take a rest then use it. If the appliance also heats after a short time, you need to open the du collector to clean up the trash inside.
Suction dropCheck whether the motor is faulty, the brush is worn, the filter is damp, the dust chamb full of dust, the hose and the suction nozzle or exhaust port are blocked, the pipeline is leaking, the interface is poorly sealed, etc.Confirm whether the motor operates normally, clean the filter, dust cup, and hose, and re-tighten accessories at the interface seal.
Body overheating or excluded gas overheatingIs the suction normal? Has it been used for more th 30 minutes?The heat exhausted from the body is caused by the heat generated by the heat conduction of motor. is a normal temperature, please continue to use it. Please stop and rest for 5 minutes before using it.

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangcheng Road 803 Nong 11 Hao 1602A-1609 Shi, Baoshan District, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UKREP

YH CONSULTING LIMITED. C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Technical line drawing of a mechanical device with a cable and labeled X (no text or symbols on the device itself).

Line drawing of a hand holding a small object with a cross mark and droplet (no text or symbols).

Line drawing of a mop and cleaning tools on a surface, with no text or symbols present.

Diagram of a curved structural element with ribbed texture and a cross symbol (no text or labels).

Illustration of a portable industrial machine with a heating element and a cross symbol, no text or labels present.

Line drawing of a bucket pouring liquid into a container (no text or symbols).

Technical line drawing of a mechanical device with no visible text or symbols.

Line drawing of a mop and scattered objects on a tiled floor (no text or symbols).

Line drawing of a vacuum cleaner with attached electrical shock symbol (no text or labels).

Technical line drawing of a mechanical component inside a circular frame (no text or symbols).

Simple line drawing of a curved tool or probe with an arrow indicating direction (no text or symbols).

1. Connection between

  1. Connection between

Floor brush

2-in-1 nozzle

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr.69,

www.vevor.com/support

WET AND DRY VACUUM CLEANER

Model: YLW6342-C

Capacity: 30L

Technical line drawing of a mechanical device with a cable and labeled X (no text or symbols on the device itself).

Line drawing of a hand holding a small object with a cross mark and droplet, no text or symbols present.

Line drawing of a mop cleaning surface with tools and debris (no text or symbols).

Diagram of a curved structural element with ribbed texture and a cross symbol (no text or labels).

Technical line drawing of a portable vacuum cleaner with a heating element, no text or symbols present.

Line drawing of a bucket pouring liquid into a container (no text or symbols).

Technical line drawing of a mechanical device with no visible text or symbols.

Line drawing of a mop cleaning debris on a tiled floor with a magnifying glass. No text or symbols.

Line drawing of a vacuum cleaner with an attached electrical shock symbol. No text or labels.

Technical line drawing of a mechanical assembly inside a circular frame. No text or symbols.

Line drawing of a curved tool or probe with a pointed tip and threaded end. No text or symbols.

  1. Hose connection.

Technical line drawing of a mechanical clamp or bracket assembly. No text or symbols.

Floor brush

2-in-1 nozzle

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Vevor YLW6342-C - 2-in-1 nozzle - 1

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

electronics www.vevor.com/support

VACUUM CLEANER AND VACUUM CLEANER

Model: YLW6342-C

Capacity: 30 liters

NEED HELP? CONTACT US!

Technical line drawing of a mechanical device with a cable and labeled X (no text or symbols on the device itself)

Line drawing of a hand holding a small object with a cross mark and droplet, no text or symbols present

Line drawing of a mop and cleaning tools on a surface, no text or symbols present

Diagram of a curved structural element with ribbed texture and a broken section, no text or symbols present

Illustration of a portable industrial machine with a heating element and a cross symbol, no text or labels present.

Line drawing of a bucket pouring liquid into a container (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a mop cleaning debris on tiled floor with a magnifying glass (no text or symbols)

Line drawing of a vacuum cleaner with attached electrical shock symbol and hand gesture (no text or labels)

Technical line drawing of a mechanical component inside a circular frame (no text or symbols)

Line drawing of a curved tool or probe with a pointed tip and threaded end.

  1. Connection between

Technical line drawing of a mechanical clamp or bracket assembly.

Technical line drawing of a mechanical tool or cutting tool with a base and handle.

  1. Connection between

2-in-1 nozzle

Imported into AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122

Australia

Rancho Cucamonga, CA 91730

REP. DELREGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

electronics www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with a cable and labeled X.

Line drawing of a hand holding a small object with a cross mark and droplet.

2. When plugging in and unplugging

Line drawing of a mop and cleaning tools on a surface.

Diagram of a curved structural element with ribbed texture and a broken section.

Illustration of a portable industrial machine with a heating element and a cross symbol, no text or labels present.

Line drawing of a bucket pouring liquid into a container (no text or symbols)

Technical line drawing of a mechanical device with no visible text or symbols

Line drawing of a mop and scattered objects on a tiled floor (no text or symbols)

Line drawing of a vacuum cleaner with attached electrical plug and fuse, next to a door (no text or symbols)

Technical line drawing of a mechanical component inside a circular frame (no text or symbols)

Simple line drawing of a curved tool or device with a handle and screw, no text or symbols present.

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Technical line drawing of a mechanical tool or cutting tool with a base and handle (no text or symbols)

  1. Connection between

floor brush

2-in-1 nozzle

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC REPRESENTATIVE

E-CrossStu GmbH

Mainzer Landstr.69,

NEED HELP? CONTACT US!

Technical line drawing of a mechanical device with a cable and labeled X (no text or symbols on the device itself).

Line drawing of a hand holding a small object with a cross mark and droplet, no text or symbols present.

Line drawing of a mop and cleaning tools on a surface, with no text or symbols present.

Diagram of a curved structural element with ribbed texture and a broken section, no text or symbols present.

4. Persons not being

Technical line drawing of a portable vacuum cleaner with a heating element, no text or symbols present.

Line drawing of a bucket pouring liquid into a container (no text or symbols).

Technical line drawing of a mechanical device with no visible text or symbols.

Line drawing of a mop cleaning debris on tiled floor with scattered items (no text or symbols).

Line drawing of a vacuum cleaner with attached electrical shock symbol and hand gesture (no text or labels)

Technical line drawing of a mechanical component inside a circular frame (no text or symbols)

Simple line drawing of a curved tool or probe with an arrow indicating direction (no text or symbols)

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Technical line drawing of a mechanical tool or cutting tool with a base and handle (no text or symbols)

  1. Connection between

Floor brush

2-in-1 nozzle

LIABILITY. C/O YH Consulting Limited

Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW1

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

WET AND DRY VACUUM CLEANER

Model: YLW6342-C

Capacity: 30L

NEED HELP? CONTACT US!

Technical line drawing of a mechanical device with a cable and labeled X (no text or symbols on the device itself)

Line drawing of a hand holding a small object with a cross mark and droplet, no text or symbols present

Line drawing of a mop cleaning a surface, with tools and debris around it. No text or symbols.

Diagram of a curved structural element with a ribbed texture and a broken section. No text or symbols.

Illustration of a portable industrial machine with a heating element and a cross symbol. No text or labels.

Line drawing of a bucket pouring liquid into a container. No text or symbols.

Technical line drawing of a mechanical device with no visible text or symbols.

Line drawing of a mop and scattered objects on a tiled floor. No text or symbols.

Line drawing of a vacuum cleaner with an attached electrical shock symbol. No text or labels.

  1. If extension tube

and the body can

Technical line drawing of a mechanical assembly inside a circular frame. No text or symbols.

Line drawing of a curved tool or probe with a handle and threaded end. No text or symbols.

  1. Connection between

universal wheels and body.

Technical line drawing of a mechanical clamp or bracket assembly (no text or symbols)

Technical line drawing of a mechanical tool or cutting tool with a base and handle (no text or symbols)

  1. Tube connection.

brush and tube.

  1. Connection between5. Connection between crevice nozzle and tubes:

Line drawing of a paintbrush with a triangular tip, shown in 3D perspective (no text or symbols)

  1. Connection between

small brush and hose or

tubes;

INSTRUCTIONS FOR USE OF FUNCTIONAL COMPONENTS

Floor brush

2-in-1 nozzle

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EG REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

WET & DRY VACUUM

Model: YLW6342-C

Capacity: 30L

NEED HELP? CONTACT US!

Technical line drawing of a mechanical device with a cable and labeled X (no text or symbols on the device itself)

Line drawing of a hand holding a small object with a cross mark and droplet, no text or symbols present

Line drawing of a mop cleaning surface with tools and debris (no text or symbols)

Diagram of a curved structural element with ribbed texture and a broken section, no text or symbols present

Technical line drawing of a portable vacuum cleaner with a heating element, no text or symbols present

Line drawing of a bucket pouring liquid into a container.

Technical line drawing of a mechanical device.

Line drawing of a mop cleaning debris on a tiled floor with scattered items.

Line drawing of a vacuum cleaner with an attached electrical shock symbol and hand gesture.

  1. As extension tube

and the body can

generate static electricity

Technical line drawing of a mechanical assembly inside a circular frame.

Line drawing of a curved tool or probe with a pointed tip and threaded end.

  1. Connection between
  1. Tube connection.

Technical line drawing of a mechanical clamp or bracket assembly.

  1. Connection between

Floor brush

2-in-1 nozzle

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

ECREP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Vevor

Model : YLW6342-C

Category : Vacuum Cleaner