UPZP-18SE - Toys Vevor - Free user manual and instructions

USER MANUAL UPZP-18SE Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

PRIZE WHEELS

USER MANUAL

MODEL:UPZP-18SE,UPZP-24SE

We continue to be committed to provide you tools with competitive price. "Save Half, "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRIZE WHEELS

MODEL: UPZP-18SE,UPZP-24SE

Circular prize wheel with multicolored segments and a 'SPIN TOWNING' logo at the center (no readable text beyond the emblem)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate

www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of safely supporting the Prize Wheels.
8. Store the tabletop prize wheels in a cool dry environment.
9. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unwrap and separate all parts in a clean work area.

Use precautions

1. This product is not a toy. Do not allow children to play with or near this item.
2. Clean hardware with a damp cloth and wipe dry. Clean the wheel with dry cloth.
3. Use only on a flat, level, hard and smooth surface capable of safely supporting the Prize Wheels.
4. Use as intended only.
5. Inspect before every use; do not use if parts are loose or damaged.

SAVE THIS MANUAL

PRODUCT PARAMETER

Model UPZP-18SE UPZP-24SE
Wheel Size 457mm 601mm
Product Size 200*450*550mm 200*600*690mm

PARTS LIST

Technical line drawings of bicycle wheel components (A, B, C, D) with no text or symbols on the diagram itself

B- Magnetic Center Cover

C- Base

D- Post

E- Marker Pen

F- Whiteboard Eraser

G- Wheel Screw

H- Wheel Wing Nut

I- Wheel Washer

J- Base Screws

K- Base Wing Nuts

L- Base Washers

M- Small Screws (one replacement)

N - Small Nuts (one replacement)

O- Pointers

P-Screw Cover

STEP 1: Assembling the Base

Align the Post into the groove of the Base, and then attach them with two Base Screws and matched Base Washers & Base Wing Nuts.

Technical line drawing of a mechanical assembly with a vertical post and two small components, enclosed in a circle (no text or symbols)

STEP 2: Assembling the Wheel

Remove the small plastic screws which are assembled on the wheel primarily at first. Then, peel off the plastic file from the wheel.

Diagram showing a bicycle wheel being adjusted for a small object, with magnified views highlighting the component and rotation direction.

STEP 3: Assembling the Wheel

graph TD
    A["22"] --> B["Node 1"]
    A --> C["Node 2"]
    A --> D["Node 3"]
    A --> E["Node 4"]
    A --> F["Node 5"]
    A --> G["Node 6"]
    A --> H["Node 7"]
    A --> I["Node 8"]
    A --> J["Node 9"]
    A --> K["Node 10"]
    A --> L["Node 11"]
    A --> M["Node 12"]
    A --> N["Node 13"]
    A --> O["Node 14"]
    A --> P["Node 15"]
    A --> Q["Node 16"]
    A --> R["Node 17"]
    A --> S["Node 18"]
    A --> T["Node 19"]
    A --> U["Node 20"]
    A --> V["Node 21"]
    A --> W["Node 22"]
    A --> X["Node 23"]
    A --> Y["Node 24"]
    A --> Z["Node 25"]

Insert the small screws into the holes around the wheel and assemble them with matched small nuts.

STEP 4: Attaching the Wheel to the Post

Attach the Wheel to the Post with Wheel Screw and matched Wheel Washer & Wheel Wing Nut.

Diagram of a fan or impeller with a central hub and an arrow pointing to the center (no text or symbols)

STEP 5: Attaching the Pointers

graph TD
    A["Start"] --> B{Loop Point}
    B --> C["Process Step"]
    C --> D["End"]

Put the Magnetic Center Cover on the front of the Wheel.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11 hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA91730

EC

REP

UK REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main.

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Made In China

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

ETVMLER®

H ÀTOMGORIZALF P

Circular prize wheel with colorful segments and a 'SPIN TOWEN' logo at the center (no readable text beyond label)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Line drawing of a bicycle wheel with spokes radiating from center (no text or symbols)

A

B C D

Technical line drawing of a mechanical bracket or support structure (no text or symbols)

E F

©

SD

A- Roue

Technical line drawing of a mechanical assembly with a vertical rod and two small components, enclosed in a circle (no text or symbols)

Illustration showing a bicycle wheel being adjusted for size, with close-ups of the wheel and handle (no text or symbols)

Diagram of a fan or impeller device inside a circular frame, with an arrow pointing to the center (no text or symbols)

A/S YH Consulting Limited Bureau 147, Centurion

Maison, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Fabriqué en Chine

®

VEVOR

OUTILS ROBUSTES, MOITIÉ PRIX

Circular prize wheel with colorful segments and a 'SPIN TOWEN' logo at the center (no readable text beyond label)

Line drawing of a bicycle wheel with spokes (no text or symbols)

A

B C D

Technical line drawing of a mechanical bracket or support structure (no text or symbols)

E F

SD

A- Rad

Technical line drawing of a mechanical assembly with no visible text or symbols

Diagram illustrating bicycle wheel rim adjustment, showing hand positioning and close-up of the wheel with red arrows indicating rotation.

Diagram of a fan or impeller device inside a circular frame, with a central vertical line and an arrow pointing to the center (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion

Haus, London Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

®

VEVILR®

TOCCAREH A BISS, HALF P

Circular prize wheel with multicolored segments and a 'SPENTOWN' emblem at the center (no readable text or symbols on the wheel itself)

Line drawing of a bicycle wheel with spokes (no text or symbols)

A

B C D

Technical line drawing of a mechanical bracket or support structure (no text or symbols)

E F

Paese E

,

PART I NEW

volte 0

(1)

A- Ruota

B- Copertura centrale magnetica

C- Base

D- Posta

Technical line drawing of a mechanical assembly with a vertical rod and base plate, no text or symbols present

Diagram illustrating bicycle wheel rim adjustment, showing hand positioning and close-up of the wheel with red arrows indicating rotation.

Diagram of a fan or impeller with a central hub and an arrow pointing to it, enclosed in a circular frame (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA91730

C/O YH Consulting Limited Ufficio 147, Centurion

Casa, London Road, Staines-upon-Thames, Surrey, TW184AX

Made in China

®

VEVORE

UTENSILI RESISTENTI, A METÀ PREZZO

elettronica www.vevor.com/support

V Y V ELR ^®

H ATOLSO, AALOE P

Circular prize wheel with colorful segments and a 'SPIN TOWER' logo at the center (no readable text beyond label)

Line drawing of a bicycle wheel with spokes radiating from center (no text or symbols)

A

B C D

Technical line drawing of a mechanical bracket or frame (no text or symbols)

E F

metro

incognita

País E

©

(1) 2015年1月

veces 0

[Unreadable]

A- Rueda

B- Tapa central magnética

C- Base

D- Puesto

E- rotulador

Technical line drawing of a mechanical assembly with no visible text or symbols

Diagram showing bicycle wheel rim adjustment with magnified views of the wheel and hand holding the rim, annotated with red arrows indicating rotation.

Diagram of a fan or impeller device inside a circular frame, with a central vertical line and an arrow pointing to the side (no text or symbols)

Casa, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Hecho en china

VEVOR

HERRAMIENTAS RESISTENTES A MITAD DE PRECIO

Circular prize wheel with multicolored segments and a 'SPENTOWN' emblem at the center (no readable text or symbols on the wheel itself)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Line drawing of a bicycle wheel with spokes radiating from center (no text or symbols)

A

B C D

Technical line drawing of a mechanical bracket or support structure (no text or symbols)

E F

© ,

SD

A- Koło

Technical line drawing of a mechanical assembly with a vertical rod and two small components, enclosed in a circle (no text or symbols)

KROK 2: Montaż koła

Illustration showing a bicycle wheel being adjusted for size, with close-ups of the wheel and handle (no text or symbols)

KROK 3: Montaż koła

graph TD
    A["22"] --> B["Radial Segment 1"]
    A --> C["Radial Segment 2"]
    A --> D["Radial Segment 3"]
    A --> E["Radial Segment 4"]
    A --> F["Radial Segment 5"]
    A --> G["Radial Segment 6"]
    A --> H["Radial Segment 7"]
    A --> I["Radial Segment 8"]
    A --> J["Radial Segment 9"]
    A --> K["Radial Segment 10"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#ccf,stroke:#333
    style D fill:#ccf,stroke:#333
    style E fill:#ccf,stroke:#333
    style F fill:#ccf,stroke:#333
    style G fill:#ccf,stroke:#333
    style H fill:#ccf,stroke:#333
    style I fill:#ccf,stroke:#333
    style J fill:#ccf,stroke:#333
    style K fill:#ccf,stroke:#333

Włóż małe śrubki do

Otwory wokół koła

i zmontuj je z

Diagram of a fan or impeller with a central hub and an arrow pointing to it, enclosed in a circular frame (no text or symbols)

C/O YH Consulting Limited Biuro 147, Centurion

Dom, London Road, Staines-upon-Thames, Surrey, TW18 4AX

VEVOR

®

WYTRZYMAŁE NARZĘDZIA, POŁOWA CENY

Circular prize wheel with colorful segments and a 'SPIN TOWEN NEW YORK' logo at the center (no additional text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Line drawing of a bicycle wheel with spokes radiating from center (no text or symbols)

A

B C D

Technical line drawing of a mechanical bracket or support structure (no text or symbols)

E F

Land E

SD

keer 0

A -wiel

B- Magnetische middenafdekking

C- Basis

D- Bericht

E- markeringspen

F- Whiteboardwisser

G- Wielschroef

H- Wielvleugelmoer

I- Wielwasser

J- Basisschroeven

Technical line drawing of a mechanical assembly with no visible text or symbols

Illustration showing a bicycle wheel being adjusted for size, with close-ups of the wheel and handle (no text or symbols)

Diagram of a fan or impeller device inside a circular frame, with an arrow pointing to the center (no text or symbols)

C/O YH Consulting Limited Kantoor 147, Centurion

Huis, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Gemaakt in China

VEVOR

ROBUUSTE GEREEDSCHAPPEN, HALVE PRIJS

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

®

V V _OCH DER ^

H TILLOUS,THALS P

Circular prize wheel with colorful segments and a 'SPIN TOWER' logo at the center (no readable text beyond label)

BEHÖVER HJÄLP? KONTAKTA OSS!

Line drawing of a bicycle wheel with spokes radiating from center (no text or symbols)

A

B C D

Technical line drawing of a mechanical bracket or support structure (no text or symbols)

E F

Land E

©

SD

gånger 0

A- Hjul

F- Whiteboard Eraser

G- Hjulskruv

H- Hjulvingmutter

I- Hjulbricka

J- Basskruvar

K- Base Wing Nuts

L- Basbrickor

M- Små skruvar

(en ersättare)

N - Små muttrar

(en ersättning)

O- Pekare

P-skruvkåpa

MONTERINGSTEG

STEG 1: Montera basen

Technical line drawing of a mechanical assembly with no visible text or symbols

STEG 2: Montera hjulet

Diagram showing bicycle wheel rim adjustment with magnified views of the wheel and hand holding the rim, annotated with red arrows indicating rotation.

STEG 3: Montera hjulet

graph TD
    A["记卫"] --> B["Node 1"]
    A --> C["Node 2"]
    A --> D["Node 3"]
    A --> E["Node 4"]
    A --> F["Node 5"]
    A --> G["Node 6"]
    A --> H["Node 7"]
    A --> I["Node 8"]
    A --> J["Node 9"]
    A --> K["Node 10"]
    A --> L["Node 11"]
    A --> M["Node 12"]
    A --> N["Node 13"]
    A --> O["Node 14"]
    A --> P["Node 15"]
    A --> Q["Node 16"]
    A --> R["Node 17"]
    A --> S["Node 18"]
    A --> T["Node 19"]
    A --> U["Node 20"]

Diagram of a fan or impeller device inside a circular frame, with a central vertical line and an arrow pointing to the side (no text or symbols)

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey,

TW18 4AX

Tillverkad i Kina

VEVOR

HÅRA VERKTYG, HALVA PRISET

www.vevor.com/support

®