SJ4 - Shelf bracket Vevor - Free user manual and instructions

Product type	Shelf mounting bracket
Brand	Vevor
Model	SJ4
Dimensions (L x W x T)	12 x 4.0 x 1.6 inches (30.5 x 10.2 x 4.1 cm)
Support thickness	5 mm
Material	Steel
Estimated unit weight	0.5 kg
Maximum load capacity	Up to 50 kg per bracket (estimate)
Included parts	6 shelf brackets, 24 expansion nails, 24 self-tapping screws M5x40 mm, 12 screws M5x16 mm, 1 spirit level
Mounting type	Wall-mounted with anchors and screws
Power supply	None (non-electric)
Main functions	Wall shelf bracket for storing various items
Maintenance and cleaning	Clean with a damp cloth and mild detergent
Safety	Use anchors suitable for the wall; do not exceed the maximum load; ensure the shelf thickness is greater than 10 mm
Spare parts and repairability	Spare parts available on request via Vevor customer service
Warranty	Electronic warranty certificate available at www.vevor.com/support
General information	Made in China; technical support and online warranty

Frequently Asked Questions - SJ4 Vevor

What is the maximum load capacity of the Vevor SJ4 shelf bracket?

The maximum load capacity is not specified in the manual, but for this type of bracket, it is estimated to reach up to 50 kg per bracket, provided that the shelf is properly attached and the wall is suitable.

What tools are needed to install the SJ4 bracket?

You will need a drill, a drill bit suitable for the wall (concrete, drywall, etc.), a screwdriver or a power screwdriver, a spirit level (included), and possibly a tape measure for measurements.

Can the SJ4 bracket be used on all types of walls?

It can be used on concrete, brick, cinder block or wood walls. For drywall walls, use suitable special anchors. The manual recommends selecting drill bits adapted to the wall openings.

What shelf thickness is required for the SJ4 bracket?

The manual indicates that the shelf thickness must be greater than 10 mm.

How many brackets are included in the SJ4 pack?

The pack contains 6 shelf brackets, along with 24 expansion nails, 24 M5x40 mm screws, 12 M5x16 mm screws, and a spirit level.

Is the spirit level included in the kit?

Yes, a spirit level is provided in the kit to facilitate installation.

How to maintain the Vevor SJ4 shelf brackets?

Clean them with a damp cloth and mild detergent. Avoid abrasive products that could scratch the surface.

Where can I get spare parts for the SJ4 model?

Spare parts are available on request from Vevor customer service via their website www.vevor.com/support.

Is the SJ4 bracket compatible with glass shelves?

Yes, provided that the glass shelf thickness is greater than 10 mm and the total weight does not exceed the estimated load capacity. Make sure to use protective pads if necessary.

What is the recommended distance between two brackets?

The manual does not specify a specific distance. In general, a center-to-center distance of 60 to 80 cm is recommended for a standard shelf, depending on the load and shelf length.

USER MANUAL SJ4 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

SHELF-BRACKETS

OPERATING INSTRUCTIONS

MODEL: SJ2/SJ4/SJ7/SJ8

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

SHELF-BRACKETS OPERATING INSTRUCTIONS

MODEL: SJ2/SJ4/SJ7/SJ8

Technical line drawing of two metal bracket components with mounting holes (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

INSTALLATION

NOTE: Select suitable drill bits for wall openings

Diagram of a solar panel array with labeled components and directional arrows (no text or symbols)

NOTE: The thickness of the table should be greater than 10mm

PARTS LIST

No	Components	Picture	Fits Model#
			SJ2	SJ4	SJ7	SJ8
A	Expansion glue nail		24pcs	24pcs	24pcs	24pcs
B	Self-tapping screws M5*40mm		24pcs	24pcs	24pcs	24pcs
C	Self-tapping screws M5*16mm		12pcs	12pcs	12pcs	12pcs
D	Shelf-Brackets		6pcs	6pcs	6pcs	6pcs
E	Spirit level		1pcs	1pcs	1pcs	1pcs

PARAMETER TABLE

Model	Size	Thickness
SJ2	10*4.0*1.6inch	5mm
SJ4	12*4.0*1.6inch	5mm
SJ7	8*4.0*1.6inch	5mm
SJ8	6*4.0*1.6inch	5mm

Address: Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Unit 5 Albert Edward House, The Pavilio

Preston, United Kingdom

Made In China

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODÈLE : SJ2/SJ4/SJ7/SJ8

MODÈLE : SJ2/SJ4/SJ7/SJ8

Technical line drawing of two metal bracket components with mounting holes (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Diagram of a solar panel array with labeled components and directional arrows (no text or symbols)

MODELL: SJ2/SJ4/SJ7/SJ8

MODELL: SJ2/SJ4/SJ7/SJ8

Technical line drawing of two metal bracket components with mounting holes (no text or symbols)

BRAUCHEN SIE HILFE? KONTAKTIERE UNS!

Diagram of a roof-mounted structure with mounting holes and a green arrow indicating upward motion, no text or symbols present.

Place, Rancho Cucamonga, CA 91730

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELLO: SJ2/SJ4/SJ7/SJ8

MODELLO: SJ2/SJ4/SJ7/SJ8

Technical line drawing of two metal bracket components with mounting holes (no text or symbols)

HO BISOGNO DI AIUTO? CONTATTACI!

Diagram showing a tool interacting with a mechanical component, with no visible text or symbols.

Diagram of a solar panel array with labeled components and directional arrows (no text or symbols)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

NSW 2122Australia

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELO: SJ2/SJ4/SJ7/SJ8

MODELO: SJ2/SJ4/SJ7/SJ8

Technical line drawing of two metal bracket components with mounting holes (no text or symbols)

Diagram of a roof-mounted structure with mounting holes and directional arrows, no text or symbols present

MODEL: SJ2/SJ4/SJ7/SJ8

MODEL: SJ2/SJ4/SJ7/SJ8

Technical line drawing of two metal bracket components with mounting holes (no text or symbols)

POTRZEBUJE POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Diagram of a roof-mounted structure with mounting holes and directional arrows, no text or symbols present

Place, Rancho Cucamonga, Kalifornia 91730

REPREZENT KE

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

PLANKBEUGELS

GEBRUIKSAANWIJZING

MODEL: SJ2/SJ4/SJ7/SJ8

MODEL: SJ2/SJ4/SJ7/SJ8

Technical line drawing of two metal bracket components with mounting holes (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Diagram showing a tool interacting with a mechanical component, with no visible text or symbols.

Diagram of a roof-mounted structure with directional arrows and a label 'C' (no text or symbols beyond basic labels)

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

MODELL: SJ2/SJ4/SJ7/SJ8

MODELL: SJ2/SJ4/SJ7/SJ8

Technical line drawing of two metal bracket components with mounting holes (no text or symbols)

BEHÖVS HJÄLP? KONTAKTA OSS!

Diagram of a solar panel array with labeled components and directional arrows (no text or symbols)

Place, Rancho Cucamonga, CA 91730

EC

REP

SHUNSHUN GmbH

Römeräcker 9 Z2021,76351

Linkenheim-Hochstetten, Tyskland

UK

REP

Pooledas Group Ltd

Enhet 5 Albert Edward House, The Pavilions

www.vevor.com/support