P1001-2 - Baby products Vevor - Free user manual and instructions

USER MANUAL P1001-2 Vevor

Affordable. Reliable. Home Improvement.

BABY PLAYPEN

MODEL: P1001-1

P1001-2

VEVOR

Affordable. Reliable. Home Improvement.

BABY PLAYPEN

MODEL: P1001-1\P1001-2

P1001-1	Product dimensions	81.1*60.83*25.59 inch\2060*1545*650mm
P1001-2	Product dimensions	81.1*72.44*25.59 inch\2060*1840*650mm

Line drawing of a rectangular enclosure with an arched entrance and slotted bottom (no text or symbols)

This is the original instruction, please read all manual instructions care before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product received. Please forgive us that we won't inform you again if there are technology or software updates on our product.

Warning-To reduce the risk of injury, user must read instructions manual carefully.

WARNING

1. Read all instructions BEFORE assembly and USE of product .KEEP INSTRUCTIONS FOR FUTURE USE.
2. Failure to follow these warnings and the instructions could result in serious injury or death.
3. This product is suitable for children aged 6 months to 24 months.
4. The product, including side rails, must be fully erected prior to use.
5. Top support member must be installed prior to use. Failure to install result in child falling out of product.
6. Strings can cause strangulation! Never place items with a string arour child's neck such as hood strings or pacifier cords. Never suspend st over product or attach strings to toys.
7. Discontinue use of the product when child is able to climb out or re the height of 35 in.(890 mm).
8. Child can become entrapped and die when improvised netting or c are placed on top of product.
9. Never add such items to confine child in product.
10. when child is able to pull to standing position, remove bumper pack large toys, and other objects that could serve as steps for climbing c
11. Never place product near a window where cords from blinds or can strangle a child.
12. Always provide the supervision necessary for the continued safety your child.when used for playing,never leave child unattended.
13. To reduce the risk of SLDS, pediatricians recommend healthy infant placed on their back to sleep, unless otherwise advised by your physic
14. Never use plastic shipping bag or other plastic film as mattress cc not sold and intended for that purpose. They can cause suffocation.
15. Never use a water mattress with this product.

16. Before installation, please make sure to clean the floor thoroughly ensure a tight connection between the suction cup and the floor. During installation, apply force firmly on the column with the suction cup to enter a secure connection between the suction cup and the floor.

17. Maintenance instruction: If the suction cup becomes contaminated after repeated use, it can be cleaned with water. After cleaning, the suction of the suction cup can be enhanced.

PACKING LIST

A1 short rods ×4

A2 long rods ×4

B1 short rods with foam sleeve ×4

long rods with foam sleeve×4 B2

c shand rods ×8

Line drawing of a T-shaped pipe fitting with two cylindrical ends (no text or symbols)

D1:Top Corner x5

(Includes an extra one for back)

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D4:Suction T-jointx5

(Includes an extra one for back)

Simple line drawing of a hand holding a small object, no text or symbols present

D2: Suction Corner x 5 (Includes an extra one for backup

Line drawing of a rectangular tray with internal compartments and a separate bag with handles (no text or symbols)

Fabric Cover x 1 Portable storage Bag x

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D3:T-joint x5.

Pile of dark, oval-shaped objects with a mesh mesh in the background (no text or symbols)

(Includes an extra one for backu
Ocean Ball x1 (50PCS)

D1 C B2 B2 B1 D3 D3 B1 D2 C D1 D2 A2 A2 D4 A1 D4 A1 D2

INSTALLATION STEPS

STEP 1

Spread the Baby Playpen, identify and confirm that the bottom surface the four side mesh cloth, the bottom should be installed first.

Two technical diagrams showing a person assembling a large bed and another assembling a wooden structure with a curved arrow indicating rotation (no text or symbols present)

STEP 2

1) Take an A1 Rod, insert the fence pole into the corresponding pipe sleeve.
2) Insert the A1 Rod into the suction connector D2 and D4.
3) Gently press to the end to confirm it is securely attached.

Line drawing of a person assembling or repairing a mechanical component, with an inset showing hand holding a tool near a textured surface (no text or symbols)

Illustration showing three-step techniques for handling a tool, with no visible text or symbols.

STEP 3

1) Install the other corner of the playpen following the method descrit. Step 2.
2) Then connect the ends of the two A1 rods using the T-joint.
3) When connecting the two pipes with a T-joint, you can first insert pipe into the T-joint, and then use both hands to pull the two pipes your body. This will allow the other pipe to smoothly fit into the con

Three-step illustration showing a hand holding a cylindrical object, with a downward arrow indicating motion (no text or symbols)

STEP 4

1) Take an C rod, insert the fence pole into the corresponding pipe s 2) Insert C rod vertically into the T-joint.
3) You have completed the installation of one side of the fence bottle. Next, follow the same steps to install the remaining sides.

Technical line drawing of a rectangular frame structure with a circular inset showing a cylindrical component labeled 'C' (no text or symbols on the diagram itself)

STEP 5

Unzip and open the fabric cover. You can install the top pipe fittings connectors in the same way as the bottom, Please note that the connectors at the four corners are Top Corners without suction cups.

B1 B2

STEP 6

The plastic parts D3 are installed last, First, insert the iron pipe into the D3 connector, then use both hands to connect the two pipes together

Illustration showing two-step instructions for handling a tool or device, with no visible text or symbols.

STEP 7

Wrap sleeves around the rods and zip them up.

Line drawing of a rectangular metal enclosure with a hand adjusting the interior panel, showing structural details and a magnified inset (no text or symbols)

CLEANING AND MAINTENANCE

Washing Instructions:

- Wipe: Clean the surface with a damp cloth.

- Detach: Remove covers for heavy stains.

- Hand Wash: Gently scrub stained areas and air dry.

- Ventilate: Place in a well-ventilated area after washing.

- Do not dry clean.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

PARC POUR BÉBÉ

MODÈLE: P1001-1

P1001-2

VEVOR

Affordable. Reliable. Home Improvement.

BABY PLAYPEN

MODÈLE: P1001-1 \ P1001-2

P1001-1	Dimensions du produit	81,1*60,83*25,59 pouce \2060*1545*650mm
P1001-2	Dimensions du produit	81,1*72,44*25,59 pouce \2060*1840*650mm

Line drawing of a rectangular enclosure with an arched entrance and slotted bottom (no text or symbols)

Simple line drawing of a cylinder with no text or symbols

B1

short rods with foam sleeve ×4

Simple line drawing of a cylindrical object with a straight line extending from its top (no text or symbols)

B2

long rods with foam sleeve×4

Simple line drawing of a cylindrical object with no text or symbols

C

shand rods ×8

Simple line drawing of a T-shaped pipe fitting with no text or symbols

D1:Top Corner x5

(Includes an extra one for back)

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D4:Suction T-jointx5

(Includes an extra one for back)

Simple line drawing of a hand holding a small object, no text or symbols present

D2:Suction Corner x 5

(Includes an extra one for backup

Line drawing of a two-part layout with compartments and a handle, no text or symbols present

Fabric Cover x 1

Portable storage Bag x

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D3:T-joint x5.

(Includes an extra one for backu

Black-and-white photo of a pile of round, oval-shaped objects with a mesh net in the background (no text or symbols)

Ocean Ball x1 (50PCS)

D1 C B2 B2 B1 D3 D3 B1 D2 D2 C A2 D4 C D1 D1 A1 A2 D2 A1 D4 D4

ÉTAPES D'INSTALLATION

ÉTAPE 1

Line drawing of a person kneeling to lift a large sheet of fabric or material (no text or symbols)

Line drawing of a person assembling or repairing a large architectural structure with no visible text or symbols

ÉTAPE 2

Line drawing of a person assembling or repairing a mechanical component, with an inset showing hand holding a textured surface (no text or symbols)

Illustration showing three steps of hand tool application: grip, press, and cutting (no text or symbols)

ÉTAPE 3

Illustration showing two steps of a hand holding a cylindrical object, with an arrow indicating direction (no text or symbols present)

ÉTAPE 4

Technical line drawing of a rectangular metal frame structure with a circular inset showing a cylindrical component labeled 'C' (no text or symbols on the diagram itself)

ÉTAPE 5

Illustration showing two-step instructions for handling a tool, with no visible text or symbols

ÉTAPE 7

Line drawing of a rectangular metal enclosure with a hand adjusting the interior panel, plus an inset showing a hand holding a small object (no text or symbols)

NETTOYAGE ET ENTRETIEN

Lieu, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

BABY-LAUFSTALL

MODELL: P1001-1

P1001-2

MODELL: P1001-1 \ P1001-2

P1001-1	Produktabmessungen	81,1*60,83*25,59 Zoll \2060*1545*650mm
P1001-2	Produktabmessungen	81,1*72,44*25,59 Zoll \2060*1840*650mm

Line drawing of a rectangular enclosure with an arched entrance and slotted bottom (no text or symbols)

short rods with foam sleeve ×4

B2

long rods with foam sleeve×4

C

shand rods ×8

Simple line drawing of a T-shaped pipe fitting with no text or symbols

D1:Top Corner x5

(Includes an extra one for back)

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D4:Suction T-jointx5

(Includes an extra one for back)

Simple line drawing of a hand holding a small object, no text or symbols present

D2:Suction Corner x 5

(Includes an extra one for backup

Line drawing of a rectangular tray with internal compartments and a separate bag with handles (no text or symbols)

Fabric Cover x 1

Portable storage Bag x

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D3:T-joint x5.

(Includes an extra one for backu

Pile of dark, oval-shaped objects with a mesh net overlay (no text or symbols)

Ocean Ball x1 (50PCS)

D1 C B2 B2 B1 D3 D3 B1 D2 D2 C A2 D4 C D1 D1 A1 A2 D2 A1 D4 D4

INSTALLATIONSSCHRITTE

SCHRITT 1

Line drawing of a person kneeling to lift a large sheet of fabric or material (no text or symbols)

Line drawing of a person assembling or repairing a large architectural structure with no visible text or symbols

SCHRITT 2

Line drawing of a person assembling or repairing a large architectural structure, with an inset showing hand holding a textured surface (no text or symbols)

Illustration showing three steps of a hand holding a tool, with no visible text or symbols

SCHRITT 3

Illustration showing two steps of a hand holding a cylindrical object, with an arrow indicating direction (no text or symbols present)

SCHRITT 4

Line drawing of a rectangular metal frame structure with a circular inset showing a cylindrical rod and a labeled point 'C' (no text or symbols on the diagram itself)

SCHRITT 5

Illustration showing two-step instructions for handling a tool or device, with no visible text or symbols.

SCHRITT 7

Line drawing of a rectangular tank with side panels and a hand adjusting the interior panel (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

BOX PER BAMBINI

MODELLO: P1001-1

P1001- 2

VEVOR

Affordable. Reliable. Home Improvement.

BABY PLAYPEN

MODELLO: P1001-1 \ P1001-2

Line drawing of a rectangular enclosure with an arched entrance and slotted bottom (no text or symbols)

short rods with foam sleeve ×4

long rods with foam sleeve×4

shand rods ×8

Simple line drawing of a T-shaped pipe fitting with no text or symbols

D1:Top Corner x5

(Includes an extra one for back)

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D4:Suction T-jointx5

(Includes an extra one for back)

Simple line drawing of a hand holding a small object, no text or symbols present

D2:Suction Corner x 5

(Includes an extra one for backup

Line drawing of a rectangular tray with internal compartments and a separate bag with handles (no text or symbols)

Fabric Cover x 1

Portable storage Bag x

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D3:T-joint x5.

(Includes an extra one for backu

Pile of dark, oval-shaped objects with a mesh net overlay (no text or symbols)

Ocean Ball x1 (50PCS)

D1 C B2 B2 B1 D3 D3 B1 D2 D2 C A2 D4 C D1 D1 A1 A2 D2 A1 D4 D4

Line drawing of a person kneeling to lift a large sheet of fabric or material (no text or symbols)

Line drawing of a person assembling or repairing a large architectural structure with no visible text or symbols

PASSO 2

Line drawing of a person assembling or repairing a mechanical component, with an inset showing hand holding a textured surface (no text or symbols)

Illustration showing three steps of hand tool application: grip, press, and cutting (no text or symbols)

PASSO 3

Illustration showing three sequential steps of a hand holding a cylindrical object, with no visible text or symbols.

PASSO 4

Line drawing of a rectangular metal frame structure with a circular inset showing a cylindrical rod and a labeled point 'C' (no text or symbols on the diagram itself)

PASSO 5

Illustration showing two-step instructions for handling a tool or device, with no visible text or symbols.

PASSO 7

Line drawing of a rectangular metal enclosure with a hand adjusting the interior panel, showing structural details and a magnified inset (no text or symbols)

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

PARQUE PARA BEBÉS

MODELO: P1001-1

P1001-2

MODELO: P1001-1 \ P1001-2

Line drawing of a rectangular enclosure with an arched entrance and slotted bottom (no text or symbols)

short rods with foam sleeve ×4

long rods with foam sleeve×4

c shand rods ×8

Simple line drawing of a T-shaped pipe fitting with no text or symbols

D1:Top Corner x5

(Includes an extra one for back)

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D4:Suction T-jointx5

(Includes an extra one for back)

Simple line drawing of a hand holding a small object, no text or symbols present

D2:Suction Corner x 5

(Includes an extra one for backup

Line drawing of a rectangular tray with internal compartments and a separate bag with handles (no text or symbols)

Fabric Cover x 1

Portable storage Bag x

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D3:T-joint x5.

(Includes an extra one for backu

Pile of dark, oval-shaped objects with a mesh net in the background (no text or symbols)

Ocean Ball x1 (50PCS)

D1 C B2 B2 B1 D3 D3 B1 D2 D2 C A2 D4 C D1 D1 A1 A2 D2 A1 D4 D4

Line drawing of a person kneeling to lift a large sheet of fabric or material (no text or symbols)

Line drawing of a person installing or adjusting a structural frame (no text or symbols)

PASO 2

Line drawing of a person assembling or repairing a mechanical component, with an inset showing hand holding a textured surface (no text or symbols)

Illustration showing three steps of hand tool application: grip, press, and cutting (no text or symbols)

PASO 3

Illustration showing two-step instructions for handling a cylindrical object, with no visible text or symbols.

PASO 4

Line drawing of a rectangular metal frame structure with a circular inset showing a cylindrical rod and a labeled point 'C' (no text or symbols on the diagram itself)

PASO 5

Illustration showing two-step instructions for handling a tool or device, with no visible text or symbols.

PASO 7

Line drawing of a rectangular pool with a hand adjusting the interior panel, showing structural details and a magnified inset (no text or symbols)

LIMPIEZA Y MANTENIMIENTO

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

KOJEC DLA NIEMOWLĄT

MODEL: P1001-1

P1001-2

MODEL: P1001-1 \ P1001-2

P1001-1	Wymiary produktu	81,1*60,83*25,59 cal \2060*1545*650mm
P1001-2	Wymiary produktu	81,1*72,44*25,59 cal \2060*1840*650mm

Line drawing of a rectangular enclosure with an arched entrance and a slanted bottom (no text or symbols)

short rods with foam sleeve ×4

Simple line drawing of a cylindrical object with a horizontal line extending from its top (no text or symbols)

B2

long rods with foam sleeve×4

C

shand rods ×8

Simple line drawing of a T-shaped pipe fitting with no text or symbols

D1:Top Corner x5

(Includes an extra one for back)

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D4:Suction T-jointx5

(Includes an extra one for back)

Simple line drawing of a hand holding a small object, no text or symbols present

D2:Suction Corner x 5

(Includes an extra one for backup

Line drawing of a rectangular tray with internal compartments and a separate bag with handles (no text or symbols)

Fabric Cover x 1

Portable storage Bag x

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D3:T-joint x5.

(Includes an extra one for backu

Pile of dark, oval-shaped objects with a mesh net overlay (no text or symbols)

Ocean Ball x1 (50PCS)

D1 C B2 B2 B1 D3 D3 B1 D2 D2 C A2 D4 C D1 D1 A1 A2 D2 A1 D4 D4

KROKI INSTALACJI

KROK 1

Line drawing of a person kneeling to lift a large sheet of fabric or material (no text or symbols)

Line drawing of a person assembling or repairing a large architectural structure with no visible text or symbols

KROK 2

Line drawing of a person assembling or repairing a large architectural structure, with an inset showing hand holding a textured surface (no text or symbols)

Illustration showing three steps of a hand holding a tool, with no visible text or symbols

KROK 3

Illustration showing two steps of a hand holding a cylindrical object, with an arrow indicating direction (no text or symbols present)

KROK 4

Line drawing of a rectangular metal frame structure with a circular inset showing a cylindrical rod and a labeled point 'C' (no text or symbols on the diagram itself)

KROK 5

Illustration showing two-step instructions for handling a tool or device, with no visible text or symbols.

KROK 7

Line drawing of a rectangular metal enclosure with a hand adjusting the interior panel, showing structural details and an inset close-up of the handle (no text or symbols)

CZYSZCZENIE I KONSERWACJA

Instrukcja prania:

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

BABY BOX

MODEL: P1001-1

P1001-2

MODEL: P1001-1 \ P1001-2

P1001-1	Productafmetingen	81,1*60,83*25,59 inch \2060*1545*650mm
P1001-2	Productafmetingen	81,1*72,44*25,59 inch \2060*1840*650mm

Line drawing of a rectangular enclosure with an arched entrance and slotted bottom (no text or symbols)

short rods with foam sleeve ×4

B2

long rods with foam sleeve×4

C

shand rods ×8

Line drawing of a T-shaped pipe fitting with no text or symbols

D1:Top Corner x5

(Includes an extra one for back)

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D4:Suction T-jointx5

(Includes an extra one for back)

Simple line drawing of a hand holding a small object, no text or symbols present

D2: Suction Corner x 5 (Includes an extra one for backup

Technical line drawing of a mechanical part with internal compartments and a handle (no text or symbols)

Fabric Cover x 1 Portable storage Bag x

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D3:T-joint x5. (Includes an extra one for backu

Pile of dark, oval-shaped objects with a mesh net overlay (no text or symbols)

Ocean Ball x1 (50PCS)

D1 C B2 B2 B1 D3 D3 B1 D2 D2 C A2 D4 C D1 D1 A1 A2 D2 A1 D4 D4

INSTALLATIESTAPPEN

STAP 1

Line drawing of a person kneeling to lift a large sheet of fabric or material (no text or symbols)

Line drawing of a person assembling or repairing a large architectural structure with no text or symbols

STAP 2

Line drawing of a person assembling or repairing a mechanical component, with an inset showing hand holding a tool near a textured surface (no text or symbols)

Illustration showing three steps of a hand tool application: grip, press, and cutting (no text or symbols present)

STAP 3

Illustration showing two steps of a hand holding a cylindrical object, with an arrow indicating direction (no text or symbols present)

STAP 4

Line drawing of a rectangular metal frame structure with a circular inset showing a cylindrical rod and a labeled point 'C' (no text or symbols on the diagram itself)

STAP 5

Illustration showing two-step instructions for handling a tool or device, with no visible text or symbols.

STAP 7

Line drawing of a rectangular metal enclosure with a hand adjusting the interior panel, showing structural details and a magnified inset (no text or symbols)

REINIGING EN ONDERHOUD

Wasvoorschriften:

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP

Affordable. Reliable. Home Improvement.

BABYLEKHAGE

MODELL: P1001-1

P1001-2

MODELL: P1001-1 \ P1001-2

P1001-1	Produktens dimensioner	81,1*60,83*25,59 tum \2060*1545*650 mm
P1001-2	Produktens dimensioner	81,1*72,44*25,59 tum \2060*1840*650 mm

Line drawing of a rectangular enclosure with an arched entrance and slotted bottom (no text or symbols)

short rods with foam sleeve ×4

B2

long rods with foam sleeve×4

C

shand rods ×8

Simple line drawing of a T-shaped pipe fitting with no text or symbols

D1:Top Corner x5

(Includes an extra one for back)

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D4:Suction T-jointx5

(Includes an extra one for back)

Simple line drawing of a hand holding a small object, no text or symbols present

D2:Suction Corner x 5

(Includes an extra one for backup

Line drawing of a rectangular tray with internal compartments and a separate bag with handles (no text or symbols)

Fabric Cover x 1

Portable storage Bag x

Simple line drawing of a T-shaped pipe fitting (no text or symbols)

D3:T-joint x5.

(Includes an extra one for backu

Pile of dark, oval-shaped objects with a mesh net overlay (no text or symbols)

Ocean Ball x1 (50PCS)

D1 C B2 B2 B1 D3 D3 B1 D2 D2 C A2 D4 C D1 D1 A1 A2 D2 A1 D4 D4

INSTALLATIONSSTEG

STEG 1

Line drawing of a person kneeling to lift a large sheet of fabric or material (no text or symbols)

Line drawing of a person installing or adjusting a structural frame with an arrow indicating rotation (no text or symbols present)

STEG 2

Line drawing of a person assembling or repairing a mechanical component, with an inset showing hand holding a tool near a textured surface (no text or symbols)

Illustration showing three steps of hand tool application: grip, cutting, and holding a tool (no text or symbols present)

STEG 3

Illustration showing three steps of a hand manipulation or tooling procedure (no text or symbols present)

STEG 4

Line drawing of a rectangular metal frame structure with a circular inset showing a cylindrical rod and a labeled point 'C' (no text or symbols on the diagram itself)

STEG 5

Illustration showing two-step instructions for handling a tool or device, with no visible text or symbols.

STEG 7

Line drawing of a rectangular metal enclosure with a hand adjusting the interior panel, plus an inset showing a hand holding a chair (no text or symbols)

RENGÖRING OCH UNDERHÅLL

Tvättinstruktioner:

YH CONSULTING LIMITED. C/O YH Consultin Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4A>

EC

REP