LY010 - TV Vevor - Free user manual and instructions

USER MANUAL LY010 Vevor

Wooden wall-mounted fixture with two metallic clips attached (no text or symbols visible)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

Cautions

1: Please confirm whether the wall is a load-bearing pond before drilling;
2: Before drilling, please confirm whether there is a water pipe at the hole |
3: Check whether the product accessories are complete before installation;
4: Make sure the drill bit is 8.5mm in size.
5: Make sure the hole depth is 6.5cm
6: The recommended height between the seat and ground is about 40-48cm.

Part List
NO.	Name	Pictures	QTY.
1	Main Body		3
2	Decorative cover		2
3	The load-bearing stick		2
4	Mounting plate		2
5	Countersunk screw M6*8		6+2
6	Nylon Bolt Cap		10+2
7	Screw ST8*70mm		10+2
8	Mounting Hole Guiding Sticker		1
9	Drill Bit 8.5*150		1
Tip: “+” is extra spare parts.

Model	LY010
Specification (inch)	20*14
Max. Load (lbs/kg)	440/200

INSTALLATION

STEP1:

Arrange the planks in order, insert the load-bearing sticks into the planks and them with countersunk screws.

1 ③ ② ① h h h

STEP2:

Measure the distance and attach the locator card to the wall.

Wall Template

STEP3:

Drill holes in the marked points of the locator card. (Drill bit is 8.5mm, punching depth is 65mm)

Close-up of a tool and a rectangular object with small dots, no visible text or symbols

STEP4:

Insert the expansion bolt so that it is flush with the wall.

Black hammer striking a surface with scattered dots, labeled with number 4 in the top-left corner (no other text or symbols)

STEP5:

Align the holes and tighten the screws.

Illustration of two mechanical components with a tool, one emitting particles and the other holding a screwdriver (no text or symbols)

STEP6:

Place the decorative cover on the load-bearing stick; latch.

Diagram of a wooden plank with two metal clips and red arrows indicating direction (no text or symbols)

STEP7:

Link the assembled body to the mounting plate and insert the pin.

Top-down view of a robotic arm with a close-up inset showing mechanical components (no text or symbols visible)

STEP8:

Fasten the decorative cover, and the installation is complete.

Wooden wall-mounted bar with silver clips and a numbered circle (8) in the corner, no text or symbols visible.

Folding Scheme

Wooden bench with three horizontal bars and metallic wheels (no text or symbols)

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Wooden wall-mounted fixture with two metallic clips attached (no text or symbols visible)

BESOIN D'AIDE? CONTACTEZ-NOUS!

1 ③ ② ① A A A

ÉTAPE 2:

Close-up of a screwdriver and a white rectangular object with small dots, next to a numbered circle (3), on a plain background.

ÉTAPE 4:

Black-and-white photo of a hammer striking debris with a numbered circle in the top-left corner (no text or symbols on the object)

ÉTAPE5 :

Illustration of three mechanical components with a numbered label (5) and no visible text or symbols

ÉTAPE 6 :

Diagram of a wooden dock with two metal clips and red arrows indicating direction (no text or symbols)

ÉTAPE 7 :

3D rendered mechanical assembly with a close-up inset showing internal components (no text or symbols visible)

ÉTAPE8 :

Wooden wall-mounted bar with silver clips, no text or symbols visible

Schéma de pliage

Wooden double-decker chair with silver wheels and metal plates (no text or symbols visible)

Fabricant: Shanghaimuxinmuyeyouxiangongsi

Adresse : Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

Importé en Australie : SIHAO PTY LTD. 1 RUE ROKEVAASTWOOD NSW 2122 Australie

C/O YH Consulting Limited Bureau 147,

Maison Centurion, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr.69,

Wooden wall-mounted fixture with two metallic clips attached (no text or symbols visible)

BRAUCHEN SIE HILFE? KONTAKTIERE UNS!

1 ③ ② ① A A A

SCHRITT 2:

Close-up of a screwdriver and a white rectangular object with small dots, next to a numbered circle (3), on a plain background.

SCHRITT 4:

Black hammer striking a surface with scattered debris, labeled with number 4 in the top-left corner (no other text or symbols)

SCHRITT 5:

Illustration of three mechanical components with a numbered label (5) and no visible text or symbols

SCHRITT 6:

Diagram of a wooden dock with two metal clips and red arrows indicating direction (no text or symbols)

SCHRITT 7:

3D rendered mechanical assembly with a close-up inset showing internal components (no text or symbols visible)

SCHRITT 8:

Wooden wall-mounted bar with silver clips, no text or symbols visible

Faltschema

Wooden double-decker chair with silver wheels and metal plates (no text or symbols visible)

Hersteller: Shanghaimuxinmuyeyouxiangongsi

Adresse: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, Shanghai 200000 CN.

C/O YH Consulting Limited Büro 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EG-REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Wooden wall-mounted fixture with two metallic clips attached (no text or symbols visible)

HO BISOGNO DI AIUTO? CONTATTACI!

1 ③ ② ① A A A

PASSO 2:

Close-up of a white rectangular object with small dots and a black tool tip, next to a numbered circle (3), against a plain gray background.

PASSO 4:

Black-and-white photo of a hammer striking debris with a numbered label (4) in the top-left corner, no other text or symbols visible.

PASSO 5:

Allineare i fori e serrare le viti.

Illustration of a mechanical tool with two components and a screwdriver, no text or symbols present

PASSO

Mechanical assembly diagram showing two metallic clips mounted on a wooden beam with red arrows indicating motion direction (no text or symbols)

PASSO

Mechanical assembly with a magnified inset showing internal components (no visible text or symbols)

PASSO 8:

Wooden wall-mounted bar with silver clips, no text or symbols visible

Schema pieghevole

Wooden double-decker chair with silver wheels and metal plates (no text or symbols visible)

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122Australia

C/O YH Consulting Limited Ufficio 147,

Casa del Centurione, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

Wooden wall-mounted fixture with two metallic clips attached (no text or symbols visible)

1 ③ ② ① A A A

PASO 2:

Close-up of a screwdriver and a white rectangular object with small dots, next to a numbered circle (3), on a plain background.

ETAPA 4:

Black hammer striking a surface with scattered debris, labeled with number 4 in the top-left corner (no other text or symbols)

PASO 5:

Illustration of three mechanical components with a numbered label (5) and no visible text or symbols

PASO 6:

Mechanical assembly diagram showing two metallic clips mounted on a wooden base with red arrows indicating motion direction (no text or symbols)

PASO 7:

Mechanical assembly with a magnified inset showing internal components (no visible text or symbols)

PASO 8:

Wooden wall-mounted bar with silver clips, no text or symbols visible

Esquema de plegado

Wooden double-decker chair with silver wheels and metal plates (no text or symbols visible)

Fabricante: Shanghaimuxinmuyeyouxiangongsi

Dirección: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importado a AUS: SIHAO PTY LTD. 1 ROKEVA CALLE ASTWOOD

Casa Centurión, London Road,

Staines upon Thames, Surrey, TW18 4AX

REPRESENTANTE DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

Wooden wall-mounted fixture with two metallic clips attached (no text or symbols visible)

POTRZEBUJE POMOCY? SKONTAKTUJ SIĘ Z NAMI!

1 ③ ② ① A A A

KROK 2:

Close-up of a white rectangular object with small dots and a black tool tip, next to a numbered circle (3), against a plain gray background.

KROK 4:

Black-and-white photo of a hammer striking debris with a numbered circle in the top-left corner (no text or symbols on the object)

KROK 5:

Illustration of a mechanical tool with two components and a tool, no text or symbols present

KROK 6:

Mechanical assembly diagram showing two metallic clips mounted on a wooden base with red arrows indicating motion direction (no text or symbols)

KROK 7:

Mechanical assembly with a magnified inset showing internal components (no visible text or symbols)

KROK 8:

Wooden wall-mounted bar with silver clips and a numbered circle (8) in the corner, no text or symbols visible.

Schemat składania

Wooden double-decker chair with silver wheels and metal plates (no text or symbols visible)

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

Import do AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD

C/O YH Consulting Limited Biuro 147,

Dom Centuriona, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

Neerklapbare douchestoel

MODEL: LY010

Wooden wall-mounted fixture with two metallic clips attached (no text or symbols visible)

HULP NODIG? NEEM CONTACT MET ONS OP!

1 ③ ② ① A A A

STAP 2:

Close-up of a white rectangular object with small dots and a black tool tip, next to a numbered circle (3), against a plain gray background.

STAP 4:

Black hammer striking a small object with scattered dots, labeled with number 4 in the top-left corner (no other text or symbols)

STAP5:

Illustration of a mechanical tool with two components and a screwdriver, no text or symbols present

STAP6:

Mechanical assembly diagram showing two metallic clips mounted on a wooden base with red arrows indicating motion direction (no text or symbols)

STAP7:

Mechanical assembly with a magnified inset showing internal components (no visible text or symbols)

STAP8:

Wooden wall-mounted bar with two silver clips, no text or symbols visible

Vouwschema

Wooden double-decker chair with silver wheels and metal plates (no text or symbols visible)

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

C/O YH Consulting Limited Kantoor 147,

Centurion House, Londen Road,

Staines-upon-Thames, Surrey, TW18 4AX

EG REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e-garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Wooden wall-mounted fixture with two metallic clips attached (no text or symbols visible)

BEHÖVS HJÄLP? KONTAKTA OSS!

1 ③ ② ① A A A

STEG 2:

Close-up of a white rectangular object with small dots and a black tool tip, next to a numbered circle (3), against a plain gray background.

STEG 4:

Black-and-white photo of a hammer striking debris with a numbered circle in the top-left corner (no text or symbols on the object)

STEG 5:

Illustration of a mechanical tool with two components and a screwdriver, no text or symbols present

STEG 6:

Mechanical assembly diagram showing two metallic clips mounted on a wooden base with red arrows indicating motion direction (no text or symbols)

STEG 7:

Mechanical assembly with a magnified inset showing internal components (no visible text or symbols)

STEG 8:

Modern bathroom wall-mounted wooden bar with metal clips, no text or symbols visible

Vikningsschema

Wooden double-decker chair with silver wheels and metal plates (no text or symbols visible)

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support