HR-3B - Uncategorized Vevor - Free user manual and instructions
Find the device manual for free HR-3B Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Multifunction heat press |
| Brand | Vevor |
| Model | HR-3B |
| Dimensions | 49.3 x 38.1 x 32 cm |
| Weight | 21.5 kg |
| Power supply | 220-240 V ~ 50/60 Hz, 1300 W |
| Temperature range | 50 to 230 °C |
| Timer | 0 to 999 seconds |
| Main platen size | 38 x 38 cm (15 x 15 inches) |
| Included accessories | Cap platen, mug platen |
| Main functions | Transfer images onto T-shirts, caps, mugs, etc. |
| Care and cleaning | Clean with a soft cloth after cooling; do not use abrasive products |
| Safety | Mandatory grounding; do not touch the hot plate; wearing gloves recommended |
| Spare parts and repairability | Replaceable plates and heating elements; contact Vevor support |
| General information | Digital controller for temperature and time; domestic and professional use |
Frequently Asked Questions - HR-3B Vevor
How to use the Vevor HR-3B heat press to transfer a design onto a t-shirt?
Preheat the press to the recommended temperature (about 160-180 °C for polyester, 180-200 °C for cotton). Place the design onto the t-shirt, lower the lever and set the timer to 10-15 seconds. Then lift the platen and remove the protective paper.
What temperature and pressing time for a transfer onto a mug?
For a mug, set the temperature to 180 °C and the time to 120-150 seconds. Press firmly with the special mug platen and wait until the cycle ends.
How to clean the PTFE platen of the press?
Wait until the press cools down completely, then clean with a slightly damp soft cloth. Use a non-abrasive cleaner if necessary, and dry thoroughly.
What are the essential safety precautions?
Plug the press into a grounded outlet. Never touch the heating plate during or after use. Wear heat-resistant gloves and keep the press out of reach of children.
Can I use the press for delicate or synthetic garments?
Yes, but use a lower temperature (110-120 °C) and a reduced time. Place a sheet of parchment paper between the platen and the garment to prevent marks.
How to replace the platen of the HR-3B press?
Ensure the press is unplugged and cooled down. Unscrew the fixing screws of the current platen, remove it, and attach the new platen by tightening the screws well. Refer to the manual for more details.
The press no longer heats up, what to do?
Check the power supply and the cable. If the problem persists, contact Vevor customer service. Do not disassemble the press yourself, as this will void the warranty.
What are the accessories included with the HR-3B model?
The press includes a main platen of 38 x 38 cm, a cap platen, a mug platen, as well as an instruction manual. Some retailers add Teflon sheets and transfer screens.
What is the electrical power of the press?
The Vevor HR-3B press operates at 220-240 V and consumes approximately 1300 W. It is suitable for domestic and light professional use.
How to store the heat press when not in use?
After cooling, clean the surfaces and fold down the platen. Store in a dry place away from dust. Never leave the press plugged in unattended.
User questions about HR-3B Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual HR-3B - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HR-3B by Vevor.
USER MANUAL HR-3B Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : HR-3B
Category : Uncategorized