TC108S - Uncategorized Vevor - Free user manual and instructions
Find the device manual for free TC108S Vevor in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Vevor |
| Model | TC108S |
| Product type | Bench lathe |
| Spindle bore | 20 mm |
| Swing over bed | 210 mm |
| Swing over cross slide | 100 mm |
| Turning length | 300 mm |
| Spindle speed | 50-2500 rpm (variable) |
| Motor power | 500 W |
| Voltage | 230 V / 50 Hz |
| Weight | 35 kg |
| Dimensions (L×W×H) | 760 × 300 × 350 mm |
| Chuck | 3-jaw chuck, Ø 100 mm |
| Control | Digital display for speed |
| Main functions | Turning, facing, drilling, thread cutting |
| Safety features | Emergency stop switch, protective cover |
| Maintenance | Regular lubrication and cleaning |
| Scope of delivery | Lathe, operating manual, tool set |
| Spare parts | Timing belt, chuck, live center available |
Frequently Asked Questions - TC108S Vevor
How do I clamp a workpiece securely in the chuck?
First clean the chuck and place the workpiece in the center. Insert the chuck key into all holes and tighten evenly until the workpiece is firmly seated. Do not over-tension the jaws to avoid deformation. Then close the protective cover.
What safety precautions should be taken before starting?
Wear safety goggles, no loose clothing, gloves only when clamping, not during operation. Check that all screws are tight and the cover is closed. Check the emergency stop button.
How do I set the correct speed?
The speed is set via the control panel. For soft materials such as aluminum, high speeds are suitable; for steel, low speeds are suitable. The display shows the selected rpm. Start with a low speed and increase it gradually.
How do I clean and lubricate the lathe?
Remove chips and clean the guideways after each use. The machine should be lubricated regularly with suitable oil, especially the lead screw and sliding surfaces. Unplug the machine for maintenance.
Can I cut threads with the TC108S?
Yes, the machine is suitable for thread cutting. To do this, clamp the threading tool in the tool holder, set the correct speed and feed. It may require several passes. You will find tables for thread pitch in the manual.
Which materials can I machine?
The lathe is suitable for machining non-ferrous metals such as aluminum, brass, and plastics, as well as soft steels. Harder steels should only be machined at low speed and with careful cutting.
What should I do if the machine vibrates during operation?
Check that the workpiece and tools are firmly clamped. Make sure the machine is set up stably. Vibrations can also be caused by too high a speed or incorrect cutting parameters. Reduce the speed and choose smaller cutting depths.
What accessories are included in the scope of delivery?
The scope of delivery includes the lathe, a set of turning tools, a 3-jaw chuck, a live center, a tool key, a screwdriver, and the operating manual. A coolant system and additional clamping devices are available as options.
How do I transport the machine safely?
Turn off the machine and unplug it. Remove loose parts such as the chuck and live center. Lift the machine with at least two people or suitable lifting equipment. Protect the guideways with wood or foam.
What do the error messages on the display mean?
The digital display can show error codes. A short beep indicates excessive load. The operating manual explains the error codes. If an error occurs, turn off the machine, wait a moment, and turn it back on.
User questions about TC108S Vevor
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual TC108S - Vevor and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TC108S by Vevor.
USER MANUAL TC108S Vevor
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Vevor
Model : TC108S
Category : Uncategorized