JM-XC-087 - Pet cage Vevor - Free user manual and instructions

USER MANUAL JM-XC-087 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

HAMSTER CAGE

USER MANUAL

MODEL:JM-XC-087

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents estimate of savings you might benefit from buying certain tools with us compared to the brands and does not necessarily mean to cover all categories of tools offered by us. Y kindly reminded to verify carefully when you are placing an order with us if you are actual half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

HAMSTER CAGE

MODEL:JM-XC-087

3D wireframe model of a mechanical cage with internal components and mounting brackets (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully be operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or soI updates on our product.

SAFETY INSTRUCTIONS

WARNING:

Read this material before using this product. Failure to do so ca result in serious injury.

Assembly precautions

1. Assemble only according to these instructions. Improper assembly c create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble if tired or when under the influence of alcohol, or medication.
6. The product capabilities apply to properly and completely assembled products only.
7. Assemble on a flat, level, hard and smooth surface capable of sa supporting the Hamster Cage.
8. For additional information regarding the parts listed in the following pages, please refer to the Assembly Diagram of this manual. Unw and separate all parts in a clean work area.

Use precautions

1. DO NOT SIT OR STAND ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or item.
3. Do not exceed specified weight capacities.
4. Use only on a flat, level, hard, and smooth surface that can safe support a fully loaded Hamster Cage.
5. Use as intended only.
6. Inspect before every use; do not use if parts are loose or damage

SAVE THIS MANUAL

PARTS LIST

Simple 3D rectangular prism with corner brackets (no text or symbols)

AX1

Architectural line drawing of two adjacent buildings with hedges and a central doorway (no text or symbols)

BX1

C×1

D X 1

EX4

FX2

G×2

H×4

IX1

J X 1

K×1

L×1

ASSEMBLY STEP

Step 1

Assemble B and C together as shown, simpcross the hooks left and right to connect

3D wireframe diagram of a geometric structure with labeled points B and C (no text or symbols beyond labels)

B C

Step 2

Place the 4 H's on top of A according to positions in the diagram.

A H H

Close-up of a mechanical component with labeled section A and H (no readable text or symbols beyond labels)

Step 3

First place the metal cage body on top of the glass tank, making sure the wire is place of H. Then assemble 4 spring buckle E.

Technical diagram of a structural frame with labeled component E (no text or symbols beyond label)

E

Architectural wireframe diagram of a building layout with labeled point E (no text or symbols beyond label)

Two-panel black-and-white image showing structural elements with diagonal lines and a small black component, no visible text or symbols.

Step 4

Assemble 2 platform F.

F F F F

Step 5

Assemble 2 ladder G.

F G G G G F

Step 6

Assemble wheel I, water bottle K, bowl J, and avoidance nest L.

Diagram illustrating a spacecraft's internal structure with labeled components (K, L, J, I) and directional arrows indicating assembly or design.

Step 7

Assemble the top D.

graph TD
    A["Initial Box"] --> B["Assembly Unit"]
    B --> C["Component D"]
    C --> D["Final Assembly Unit"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

Done

3D wireframe model of a simple cage-like structure with internal components and supports (no text or symbols)

PRODUCT PARAMETER

Model	JM-XC-087
Net Weight	11.1kg
Gross weight	13.3kg
Colour	Black
Product Size	22.8x 15 x 21.3in

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a multi-compartment cage-like structure with internal components and structural supports (no text or symbols visible)

Simple 3D rectangular prism with corner brackets (no text or symbols)

AX1

Simple line drawing of two identical structures with hedges and a central doorway (no text or symbols)

BX1

C×1

D×1

EX4

FX2

G×2

HX4

IX1

J X 1

K×1

L×1

FASE DI MONTAGGIO

Passo 1

3D wireframe diagram of a rectangular prism with labeled points B and C (no text or symbols beyond labels)

B C

Passo 2

Close-up of mechanical components with labeled points A and H (no readable text or symbols beyond labels)

Passo 3

Technical diagram of a wire cage structure with labeled component E (no text or symbols beyond label)

Architectural wireframe diagram of a building structure with labeled points E (no text or symbols beyond labels)

Abstract black-and-white geometric structure with diagonal lines and a small protrusion (no text or symbols)

Passo 4

Three-panel technical diagram showing structural components with labeled parts (F and G), no readable text or symbols present.

Passo 6

Diagram illustrating a mechanical assembly process with labeled components K, L, J, and I, showing progressive assembly from wire mesh to final assembly.

Technical diagram illustrating a mechanical assembly with labeled components D and B, showing structural changes and motion directions.

Fatto

3D wireframe model of a simple cage-like structure with internal components and no visible text or symbols

PARAMETRO PRODOTTO

C/O YH Consulting Limited Ufficio 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Importato in AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a multi-compartment cage-like structure with internal components and structural supports (no text or symbols visible)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Simple 3D rectangular prism with corner brackets (no text or symbols)

AX1

Simple line drawing of two identical structures with hedges and a central doorway (no text or symbols)

BX1

C×1

D×1

EX4

FX2

G×2

HX4

IX1

J X 1

K×1

L×1

KROK MONTAŻU

Krok 1

3D wireframe diagram of a rectangular prism with labeled points B and C (no text or symbols beyond labels)

B C

Krok 2

Close-up of mechanical components with labeled points A and H (no readable text or symbols beyond labels)

Krok 3

Technical diagram of a wire cage structure with labeled component E (no text or symbols beyond label)

Architectural wireframe diagram of a building structure with labeled points E (no text or symbols beyond labels)

Abstract geometric structure with diagonal lines and a small black component, no text or symbols present

Krok 4

Złóż 2 platformy F.

F F F F

Krok 5

Złóż 2 drabiny G.

Three-panel technical diagram showing structural components with labeled parts (F and G), no readable text or symbols present.

Krok 6

Diagram illustrating a mechanical assembly process with labeled components K, L, J, and I, showing progressive assembly from wire mesh to final assembly.

Krok 7

Złóż górną część D.

graph TD
    A["Initial setup with grid lines and labeled components D"] --> B["Assembly of a mechanical component"]
    B --> C["Final assembly with labeled parts D and B"]
    style A fill:#f9f,stroke:#333
    style B fill:#bbf,stroke:#333

Zrobione

3D wireframe model of a cage-like structure with internal components and structural supports (no text or symbols)

PARAMETR PRODUKTU

Model	JM-XC-087
Masa netto	11,1 kg
Masa brutto	13,3 kg
Kolor	Czarny
Rozmiar produktu	22,8 x 15 x 21,3 cala

Producent: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, szanghaj 200000 CN.

C/O YH Consulting Limited Biuro 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Importowane do AUS: SIHAO PTY LTD.

1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importowane do USA: Sanven Technology Ltd.

Apartament 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cage-like structure with internal components and structural supports (no text or symbols)

Simple 3D rectangular prism with corner brackets (no text or symbols)

AX1

Simple line drawing of two identical structures with hedges and a central doorway (no text or symbols)

BX1

C×1

D×1

EX4

FX2

G×2

HX4

IX1

J X 1

K×1

L×1

MONTAGESTRITT

Schritt 1

3D wireframe diagram of a rectangular prism with labeled points B and C (no text or symbols beyond labels)

B C

Schritt 2

Close-up of mechanical components with labeled points A and H (no readable text or symbols beyond labels)

Schritt 3

Technical diagram of a wire cage structure with labeled component E (no text or symbols beyond label)

E

Architectural wireframe diagram of a building structure with labeled point E (no text or symbols beyond label)

Two-panel black-and-white architectural detail showing vertical and horizontal lines, possibly structural elements or metal framework (no text or symbols visible)

Schritt 4

Three-panel diagram showing structural components with labeled parts (F and G), no readable text or symbols present.

Schritt 6

Diagram illustrating a mechanical assembly process with labeled components K, L, J, and I, showing progressive assembly from wire mesh to final assembly.

Schritt 7

graph TD
    A["Initial setup with grid lines and labeled components D"] --> B["Assembly of a mechanical component"]
    B --> C["Final assembly with labeled parts D and B"]
    style A fill:#f9f,stroke:#333
    style B fill:#bbf,stroke:#333

Erledigt

3D wireframe model of a multi-compartment cage structure with internal components (no text or symbols visible)

PRODUKTPARAMETER

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cage-like structure with internal components and structural supports (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Simple 3D rectangular prism with corner brackets (no text or symbols)

AX1

Simple line drawing of two identical structures with hedges and a central doorway (no text or symbols)

BX1

C×1

D X 1

EX4

FX2

G×2

HX4

IX1

J X 1

K×1

L×1

ÉTAPE D'ASSEMBLAGE

Étape 1

3D wireframe diagram of a rectangular prism with labeled points B and C (no text or symbols beyond labels)

B C

Étape 2

Close-up of mechanical components with labeled points A and H (no readable text or symbols beyond labels)

Étape 3

Technical diagram of a wire cage structure with labeled component E (no text or symbols beyond label)

Architectural wireframe diagram of a building structure with labeled points E (no text or symbols beyond labels)

Abstract black-and-white geometric structure with diagonal lines and a small protrusion (no text or symbols)

Étape 4

Assembler 2 plateformes F.

F F F F

Étape 5

Three-panel technical diagram showing structural components with labeled parts (F and G), no readable text or symbols present.

Étape 6

Technical diagram illustrating a mechanical assembly with labeled components (K, L, J, I) and directional arrows indicating process flow.

Technical diagram illustrating a mechanical assembly with labeled components D and B, showing structural changes and motion directions.

Fait

3D wireframe model of a simple cage-like structure with internal components and no visible text or symbols

PARAMÈTRE DU PRODUIT

A/S YH Consulting Limited Bureau 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Importé en AUS : SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australie

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a multi-compartment cage-like structure with internal components and structural supports (no text or symbols visible)

HULP NODIG? NEEM CONTACT MET ONS OP!

Simple 3D rectangular prism with corner brackets (no text or symbols)

AX1

Simple line drawing of two identical house-like structures with hedges and a central doorway (no text or symbols)

BX1

C×1

D×1

EX4

FX2

G×2

HX4

IX1

J X 1

K×1

L×1

MONTAGESTAP

Stap 1

3D wireframe diagram of a rectangular prism with labeled points B and C (no text or symbols beyond labels)

B C

Stap 2

Close-up of mechanical components with labeled points A and H (no readable text or symbols beyond labels)

Stap 3

Technical diagram of a wire cage structure with labeled component E (no text or symbols beyond label)

Architectural wireframe diagram of a building structure with labeled points E (no text or symbols beyond labels)

Abstract black-and-white geometric structure with diagonal lines and a small protrusion (no text or symbols)

Stap 4

Monteer 2 platform F.

F F F F

Stap 5

Monteer 2 ladder G.

Three-panel diagram showing structural components with labeled parts (F and G), no readable text or symbols present.

Stap 6

Diagram illustrating a mechanical assembly process with labeled components K, L, J, and I, showing progressive assembly from wire mesh to final assembly.

Stap 7

Technical diagram illustrating a mechanical assembly with labeled components D and B, showing structural changes and motion directions.

Klaar

3D wireframe model of a simple cage-like structure with internal components and no visible text or symbols

PRODUCTPARAMETER

Model	JM-XC-087
Netto gewicht	11,1 kg
	13,3 kgBrutogewicht
Kleur	Zwart
Productgrootte	22,8 x 15 x 21,3 inch

Fabrikant: Shanghaimuxinmuyeyouxiangongsi

Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000

CN.

EG-REP: E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

VK VERTEGENWOORDIGING: YH CONSULTING LIMITED.

C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technische ondersteuning en e- garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a multi-compartment cage-like structure with internal components and structural supports (no text or symbols visible)

BEHÖVER HJÄLP? KONTAKTA OSS!

Simple 3D rectangular prism with corner brackets (no text or symbols)

AX1

Simple line drawing of two identical structures with hedges and a central doorway (no text or symbols)

BX1

C×1

D×1

EX4

FX2

G×2

HX4

IX1

J X 1

K×1

L×1

MONTERINGSTEG

Steg 1

3D wireframe diagram of a rectangular prism with labeled points B and C (no text or symbols beyond labels)

B C

Steg 2

Close-up of mechanical components with labeled points A and H (no readable text or symbols beyond labels)

Steg 3

Technical diagram of a wire cage structure with labeled component E (no text or symbols beyond label)

Architectural wireframe diagram of a building structure with labeled points E (no text or symbols beyond labels)

Abstract black-and-white geometric structure with diagonal lines and a small protrusion (no text or symbols)

Steg 4
Montera 2 plattform F.

F F F F

Steg 5
Montera 2 stegar G.

Three-panel technical diagram showing structural components with labeled parts (F and G), no readable text or symbols present.

Steg 6

Diagram illustrating a mechanical assembly process with labeled components K, L, J, and I, showing progressive assembly from wire mesh to final assembly.

Steg 7
Montera toppen D.

Technical diagram illustrating a mechanical assembly with labeled components D and B, showing rotational and linear motion views.

Gjort

3D wireframe model of a cage-like structure with internal components and structural supports (no text or symbols)

PRODUKTPARAMETER

Modell	JM-XC-087
Nettovikt	11,1 kg
Bruttovikt	13,3 kg
Färg	Svart
Produktstorlek	22,8 x 15 x 21,3 tum

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

EC REP: E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road,

Staines-upon-Thames, Surrey, TW18 4AX

Importerad till AUS: SIHAO PTY LTD.

1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

3D wireframe model of a cage-like structure with internal components and structural supports (no text or symbols)

Simple 3D rectangular prism with corner brackets (no text or symbols)

AX1

Simple line drawing of two identical structures with hedges and a central doorway (no text or symbols)

BX1

C×1

D X 1

EX4

FX2

G×2

HX4

IX1

J X 1

K×1

L×1

PASO DE MONTAJE

Paso 1

3D wireframe diagram of a rectangular prism with labeled points B and C (no text or symbols beyond labels)

B C

Paso 2

Close-up of mechanical components with labeled points A and H (no readable text or symbols beyond labels)

Paso 3

Technical diagram of a wire cage structure with labeled component E (no text or symbols beyond label)

Architectural wireframe diagram of a building structure with labeled points E (no text or symbols beyond labels)

Abstract black-and-white geometric structure with diagonal lines and a small protrusion (no text or symbols)

Three-panel technical diagram showing structural components with labeled parts (F and G), no readable text or symbols present.

Paso 6

Technical diagram illustrating a mechanical assembly with labeled components (K, L, J, I) and directional arrows indicating process flow.

Paso 7
Ensamble la parte superior D.

Technical diagram illustrating a mechanical assembly with labeled components D and B, showing rotational and linear motion views.

Hecho

3D wireframe model of a simple cage-like structure with internal components and supports (no text or symbols)

PARÁMETRO DEL PRODUCTO

C/O YH Consulting Limited Oficina 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Importado a AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE