FE-HT-MYY04 - Toys Vevor - Free user manual and instructions

USER MANUAL FE-HT-MYY04 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

CHILDREN'S SLIDE

MODEL:FE-HT-MYY04

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only rep estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offere are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

MODEL:FE-HT-MYY04

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel from contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

WARNING:

Read this material before using this product. Failure to do so ca result in serious injury.

WARNING:

ADULT ASSE MBLY REQUIRED.

• Keep these instructions for future reference.
  • To prevent serious injury, children must not use the equipment until properly installed
• Falls onto hard surfaces can result in head or other serious injuries. Never place concrete, asphalt, wood, packed earth, grass or other hard surfaces. Carpet over hard floors may not prevent injury. Always use protective surfacing on the ground under an surrounding the playground equipment according to the enclosed “Consumer Information Sheet for Playground Surfacing Materials.” Maximum fall height protection up to 2 feet (m) required.

- Adult supervision required. Do not leave children unattended.

- Shoes must be worn at all times. - This product is intended for indoor/outdoor domestic family use only.

- Observing the following statements and warnings reduces the likelihood of serious injury.

- Place this product on level ground and at least 6'6" (2 m) away from any object. to be avoided include, but are not limited to, fences, buildings, overhead branches, la lines or electrical wires.

- It is recommended that the orientation of the assembled product be such that direct sunlight is minimized on surfaces intended for standing or sitting.

- Instruct children on proper use of this product, only after properly placed, and not manner other than intended.

- Do not allow children to climb on product when product is wet.

- Instruct children not to attach items to the product that are not specifically designed use with the product such as, but not limited to, jump ropes, clotheslines, pet leashe cables and chains, as they may cause a strangulation hazard.

• Instruct children to remove their bike or other sports helmet before playing on this
• Dress children appropriately: do not allow children to wear loose-fitting clothing including ponchos, scarves and garments with drawstrings. Well-fitting shoes must be worn at a times.

- Warning. Only for domestic use.

MAINTENANCE

WARNING:

Failure to perform periodic checks could cause this product to overturn or cause a fa The following checks should be performed at the beginning and end of each season twice monthly during the usage period:

• Reinstall any plastic parts, such as swing seats or any other items that were removed the cold season.
• Tighten all hardware.
• Lubricate all metallic moving parts at the beginning of the play season and twice 1 month during the play season. - Check all protective coverings on bolts, pipes, edges corners. Replace if they are loose, cracked, or missing.
• Check all moving parts including swing seats, ropes, cables, and chains for wear, other deterioration. Replace if any of these conditions exist.
• Check metal parts for rust. If found, sand and repaint using a nonlead-based paint the requirements of 16 CFR 1303.
• Rake and check depth of loose fill protective surfacing materials to prevent compac and to maintain appropriate depth. Replace as necessary.
  • Take this product indoors or do not use when temperatures fall below 0^ F/-18°C.

DISPOSAL

- Disassemble and dispose of equipment in such a manner that no hazardous condition such as, but not limited to, small parts and sharp edges exist at the time equipment discarded.

Screw type A

① Assemble the slide EXTENSION with the Slide LARGE, and then tighten the screws.

Small cross nut

② Secure rails on both sides of the guide rails

Type B screw

③ Install the duck cover and duck cover top

Child prodigy nut

④ 2 lug platform and platform baffle assembly

Child prodigy nut

⑤ Fix the assembled platform and 3-hole baffle

Flower nut Square block screw

⑥ Install the assembled guide rails

HAPPY SLIDE HAPPY SLIDE Large nut

⑦ Assemble stair banisters treads and baffles

Child prodigy nut

⑧ Secure the assembled staircase to the L side panel

Child prodigy nut

⑨ Attach the L-side plate to the other side of the slide

Large nut

10 Installing a basketball hoop

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

11 Installation Complete

Accessories
	1PC
	1PC
	1PC
	1PC
	1PC
	1PC
	1PC
	3PCS
	1PC
	1PC
	1PC
	1PC
	1PC
	2PCS
	2PCS
	1PC
	1PC
	8PCS
	19PCS
	18PCS
	2PCS
	1PC
	2PCS
	2PCS
	5PCS
	2PCS
	1PC

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

BESOIN D'AIDE? CONTACTEZ-NOUS!

Screw type A

① Assemble the slide EXTENSION with the Slide LARGE, and then tighten the screws.

Small cross nut

② Secure rails on both sides of the guide rails

Type B screw

③ Install the duck cover and duck cover top

Child prodigy nut

④ 2 lug platform and platform baffle assembly

Child prodigy nut

⑤ Fix the assembled platform and 3-hole baffle

Flower nut Square block screw

⑥ Install the assembled guide rails

HAPPY SLIDE HAPPY SLIDE Large nut

⑦ Assemble stair banisters treads and baffles

Child prodigy nut

⑧ Secure the assembled staircase to the L side panel

Child prodigy nut

⑨ Attach the L-side plate to the other side of the slide

Large nut

10 Installing a basketball hoop

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

11 Installation Complete

YH CONSULTING LIMITED. C/O YH Consulting

Limited Bureau 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

REPRÉSENTANT

DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

Screw type A

① Assemble the slide EXTENSION with the Slide LARGE, and then tighten the screws.

Small cross nut

② Secure rails on both sides of the guide rails

Type B screw

③ Install the duck cover and duck cover top

Child prodigy nut

④ 2 lug platform and platform baffle assembly

Child prodigy nut

⑤ Fix the assembled platform and 3-hole baffle

Flower nut Square block screw

⑥ Install the assembled guide rails

HAPPY SLIDE HAPPY SLIDE Large nut

⑦ Assemble stair banisters treads and baffles

Child prodigy nut

⑧ Secure the assembled staircase to the L side panel

Child prodigy nut

⑨ Attach the L-side plate to the other side of the slide

Large nut

10 Installing a basketball hoop

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

11 Installation Complete

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

Screw type A

① Assemble the slide EXTENSION with the Slide LARGE, and then tighten the screws.

Small cross nut

② Secure rails on both sides of the guide rails

Type B screw

③ Install the duck cover and duck cover top

Child prodigy nut

④ 2 lug platform and platform baffle assembly

Child prodigy nut

⑤ Fix the assembled platform and 3-hole baffle

Flower nut Square block screw

⑥ Install the assembled guide rails

HAPPY SLIDE HAPPY SLIDE Large nut

⑦ Assemble stair banisters treads and baffles

Child prodigy nut

⑧ Secure the assembled staircase to the L side panel

Child prodigy nut

⑨ Attach the L-side plate to the other side of the slide

Large nut

10 Installing a basketball hoop

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

11 Installation Complete

Accessori
	1 pz.
	1 pz.
	1 pz.
	1 pz.
	1 pz.
	1 pz.
	1 pz.
	3 PZ
	1 pz.
	1 pz.
	1 pz.
	1 pz.
	1 pz.
	2 PZ
	2 PZ
	1 pz.
	1 pz.
	8 PZ
	19 PZ
	18 POLLICI
	2 PZ
	1 pz.
	2 PZ
	2 PZ
	5 PZ
	2 PZ
	1 pz.

Importato in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Importato negli USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

RAPPRESENTANZA DEL REGNO UNITO

YH CONSULTING LIMITED. C/O YH Consulting

Limited Ufficio 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

elettronica www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

Screw type A

① Assemble the slide EXTENSION with the Slide LARGE, and then tighten the screws.

Small cross nut

② Secure rails on both sides of the guide rails

Type B screw

③ Install the duck cover and duck cover top

Child prodigy nut

④ 2 lug platform and platform baffle assembly

Child prodigy nut

⑤ Fix the assembled platform and 3-hole baffle

Flower nut Square block screw

⑥ Install the assembled guide rails

HAPPY SLIDE HAPPY SLIDE Large nut

⑦ Assemble stair banisters treads and baffles

Child prodigy nut

⑧ Secure the assembled staircase to the L side panel

Child prodigy nut

⑨ Attach the L-side plate to the other side of the slide

Large nut

10 Installing a basketball hoop

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

11 Installation Complete

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

POTRZEBUJESZ POMOCY? SKONTAKTUJ SIĘ Z NAMI!

Screw type A

① Assemble the slide EXTENSION with the Slide LARGE, and then tighten the screws.

Small cross nut

② Secure rails on both sides of the guide rails

Type B screw

③ Install the duck cover and duck cover top

Child prodigy nut

④ 2 lug platform and platform baffle assembly

Child prodigy nut

⑤ Fix the assembled platform and 3-hole baffle

Flower nut Square block screw

⑥ Install the assembled guide rails

HAPPY SLIDE HAPPY SLIDE Large nut

⑦ Assemble stair banisters treads and baffles

Child prodigy nut

⑧ Secure the assembled staircase to the L side panel

Child prodigy nut

⑨ Attach the L-side plate to the other side of the slide

Large nut

10 Installing a basketball hoop

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

11 Installation Complete

YH CONSULTING LIMITED. C/O YH Consulting Limited

Biuro 147, Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

Przedstawiciel UE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt nad Menem.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

HULP NODIG? NEEM CONTACT MET ONS OP!

Screw type A

① Assemble the slide EXTENSION with the Slide LARGE, and then tighten the screws.

Small cross nut

② Secure rails on both sides of the guide rails

Type B screw

③ Install the duck cover and duck cover top

Child prodigy nut

④ 2 lug platform and platform baffle assembly

Child prodigy nut

⑤ Fix the assembled platform and 3-hole baffle

Flower nut Square block screw

⑥ Install the assembled guide rails

HAPPY SLIDE HAPPY SLIDE Large nut

⑦ Assemble stair banisters treads and baffles

Child prodigy nut

⑧ Secure the assembled staircase to the L side panel

Child prodigy nut

⑨ Attach the L-side plate to the other side of the slide

Large nut

10 Installing a basketball hoop

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

11 Installation Complete

Accessoires
	1 STUK
	1 STUK
	1 STUK
	1 STUK
	1 STUK
	1 STUK
	1 STUK
	3 STUKS
	1 STUK
	1 STUK
	1 STUK
	1 STUK
	1 STUK
	2 STUKS
	2 STUKS
	1 STUK
	1 STUK
	8STUKS
	19STUKS
	18STUKS
	2 STUKS
	1 STUK
	2 STUKS
	2 STUKS
	5 STUKS
	2 STUKS
	1 STUK

Fabrikant: Shanghaimuxinmuyeyouxiangongsi Adres: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

YH CONSULTING LIMITED. C/O YH Consulting Limited Kantoor 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

EC-REP

E-CrossStu GmbH Mainzer Landstr.69, 60329 Frankfort aan de Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

garantiecertificaat www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

BEHÖVER HJÄLP? KONTAKTA OSS!

Screw type A

① Assemble the slide EXTENSION with the Slide LARGE, and then tighten the screws.

Small cross nut

② Secure rails on both sides of the guide rails

Type B screw

③ Install the duck cover and duck cover top

Child prodigy nut

④ 2 lug platform and platform baffle assembly

Child prodigy nut

⑤ Fix the assembled platform and 3-hole baffle

Flower nut Square block screw

⑥ Install the assembled guide rails

HAPPY SLIDE HAPPY SLIDE Large nut

⑦ Assemble stair banisters treads and baffles

Child prodigy nut

⑧ Secure the assembled staircase to the L side panel

Child prodigy nut

⑨ Attach the L-side plate to the other side of the slide

Large nut

10 Installing a basketball hoop

Technical line drawing of a mechanical device with multiple arms and components (no text or symbols)

11 Installation Complete

Tillbehör
	1 st
	1 st
	1 st
	1 st
	1 st
	1 st
	1 st
	3 st
	1 st
	1 st
	1 st
	1 st
	1 st
	2 st
	2 st
	1 st
	1 st
	8 st
	19 st
	18 st
	2 st
	1 st
	2 st
	2 st
	5 st
	2 st
	1 st

Tillverkare: Shanghaimuxinmuyeyouxiangongsi

Adress: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Importerad till AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australien

Importerad till USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED. C/O YH Consulting

Limited Office 147, Centurion House, London

Road, Staines-upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support