A70002102 - Building kit Vevor - Free user manual and instructions

Brand	Vevor
Model	A70002102 (set of 2 assemblies)
Product Type	Gate Frame Construction Kit
Material	Q235A Steel
Color	Black
Number of Sets	2 (model A70002102) / 1 (model A70002101)
Included Components	Upper and lower brackets, corner brackets, latch, M5 screws (round and flat head) of different lengths
Applications	Garden doors, sheds, driveway gates, enclosures, barns, etc.
Main Functions	Reinforcement of wooden doors, prevention of aging, sagging and shaking
Installation Method	Fastening the brackets to the wooden slats using the provided screws
Safety	Wear hearing, eye, dust protection and gloves during installation
Maintenance	Apply anti-rust paint if necessary; regularly check the fastening
Supported Weight	Only the door's own weight; do not hang heavy objects
Warranty	Electronic warranty certificate available at www.vevor.com/support
Technical Support	www.vevor.com/support
Manufacturer	Shanghaimuxinmuyeyouxiangongsi, Shanghai, China
EU Representative	Mainzer Landstr.69, 60329 Frankfurt am Main, Germany
US Importer	Sanven Technology Ltd.

Frequently Asked Questions - A70002102 Vevor

What tools are needed to install this gate construction kit?

You will need a drill, drill bits for pilot holes, a Phillips screwdriver, and possibly a wrench. Make sure to wear protective equipment (gloves, goggles) during installation.

Is this kit compatible with all types of wooden doors?

This kit is designed for small shed doors, garden doors, driveway gates, corral gates, barn doors, etc. It is suitable for standard wooden doors. Check that the thickness of the wooden slats allows for fixing the provided screws.

How many assemblies are included in model A70002102?

Model A70002102 contains 2 complete sets of brackets, allowing you to mount two doors or a double gate. Model A70002101 contains 1.

How to install the automatic locking latch?

After centering the latch on the closed door, mark and drill pilot holes. For automatic locking, drill a hole in the post and attach a wire from the latch to the ring (see figure way2 in the manual).

What is the material of the kit?

The kit is made of high-quality Q235A steel, with a black finish for better corrosion resistance.

Can I use this kit for a heavy gate or garage door?

No, this kit is designed to support only the door's own weight. Do not use it for heavy doors or to hang objects. For heavier applications, choose a reinforced kit.

How to maintain the kit to prevent rust?

If the coating is damaged, apply anti-rust paint to exposed areas. Regularly clean dust and debris to prevent stagnant moisture.

Is there a warranty on this product?

Yes, Vevor provides an electronic warranty certificate. Register your product at www.vevor.com/support to benefit from technical support and warranty.

Are the provided screws sufficient for a standard installation?

Yes, the kit includes M5*30 round head screws, M5*40 and M5*25 flat head screws in sufficient quantities to fix all brackets. Follow the instructions for the exact number.

Can I buy spare parts separately?

Yes, you can contact Vevor customer service at www.vevor.com/support to order spare parts such as brackets or screws.

USER MANUAL A70002102 Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

FRAME GATE BUILDING KIT USER MANUAL

MODEL: A70002101 & A70002102

We continue to be committed to providing you with tools at competitive prices.

"Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to other brands and do not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully when placing an order with us if you are actually saving half compared to the top major brands.

MODEL: A70002101 & A70002102

Note: The actual product you receive determines its look.

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact Technical Support and E-Warranty Certificate at www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.

Important safety instructions

	Warning - To reduce the risk of injury, the user must read instructions manual carefully.
	Warning- Be sure to wear ear protectors when using this pro
	Warning- Be sure to wear eye protectors when using this pro
	Warning- Be sure to wear dust masks when using this produ
	Warning- Be sure to wear gloves when using this product.

WARNING!

1. Please read the instructions carefully.
2. After receiving the goods, please check whether the accessories are complete.
3. Products can be applied to small shed doors, such as garden doors, driveway doors, corral doors, barn doors, sundry doors, e
4. The assembled door can only bear its own weight, and cannot support people or hang heavy objects.

PRODUCT DESCRIPTION

Garden doors, fences, etc. are usually composed of wooden doors. Wooden doors exposed to outdoor sun and rain for a long time tend to age, sag, and shake. Therefore, you can repair the wooden door through the door frame support to extend its service life.

PRODUCT STRUCTURE

Item	Description	Qty
A	Top Bracket	1pcs
B	Bottom Bracket	1pcs
C	Conner bracket I	2pcs
D	Conner bracket II	2pcs
E	Latch fitting	1pcs
	M5*30 round head screw	6pcs
	M5*40 flat head screw	20pcs
	M5*25 flat head screw	20pcs

INSTALLATION PROCEDURES

1. Place the wood batten onto the bottom bracket and install the M5*40 flat head screws into the countersunk holes.

1. Install the top bracket A in the same way as the bottom bracket B.

1. Install the corner brackets C/D to the corners of the gate with M5*25 screws.

1. Install the hinges to the gate frame with M5*40 screws.

1. Install the latch fitting to the gate with M5*30 screws.

5.1: Close the gate and center the latch. 5.2: Mark the screw holes, drill four pilot holes for the latch and two holes for the bolt. 5.3: If you need self-locking, drill a hole in the post and attach a wire from the latch to the post, as shown in figure way 2.

PARAMETER

SPEC. Model	A70002101	A70002102
Material	Q235A	Q235A
Style	“7” model	“7” model
Number	1 Set	2 Set
Color	Black	Black

Manufacturer: Shanghai Muxin Wood Industry Co., Ltd.

Address: Room 1602A-1609, No. 11, Lane 803, Shuangcheng Road, Baoshan District, Shanghai 200000, China.

EC REP: E-CrossStu GmbH.

Mainzer Landstr.69, 60329 Frankfurt am Main.

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

(Without wood)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREET, EASTWOOD NSW 2122 Australia

Imported into the USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

(Excluding wood)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported into AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

(Excluding wood)

PRODUCT STRUCTURE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

(excluding wood)

Punkt	Beskrivning	Antal
A	Toppfäste 1 st
B	Buttom Bracket	1 st
C	Conner-fäste y	2 st
D	Conner-fäste y	2 st
E	Spärrbeslag	1 st
	M5*30 rund skruv	6 st
	M5*40 platt skruv	20 st
	M5*25 platt skruv	20 st

INSTALLATION PROCEDURES

1. Insert the wooden slat

into the end fitting A

1. Mount it

UK REP: YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

(Excluding wood)

NEED HELP? CONTACT US!

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

(Excluding wood)

PRODUCT STRUCTURE

A/S YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Imported in AUS: SIHAO PTY LTD.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE

(Without wood)

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

VEVOR®

TOUGH TOOLS, HALF PRICE