JM-200A - Razor Vevor - Free user manual and instructions

Product Type	Professional Hair Clipper
Brand	Vevor
Model	JM-200A
Power	10 W
Input Voltage	DC 5 V
Battery Type	Built-in Rechargeable
Charging Time	1.5 hours (first charge: 8 hours)
Battery Life	90 minutes
Usage Mode	Corded or Cordless
Blade Material	Stainless Steel
Included Accessories	Cutting combs 1, 2, 3 mm, lubricating oil, cleaning brush
Cleaning	Rinse with warm water, wipe dry and lubricate after each use
Safety	Do not use in bath or shower; keep out of reach of children
Warranty	2 years
Compliance	FCC Part 15, European Directive 2012/19/EU
Maintenance	Clean blades after each use, lubricate regularly
Recycling	Do not dispose of with household waste; drop off at a collection point

Frequently Asked Questions - JM-200A Vevor

How to charge the JM-200A clipper?

Before first use, charge fully for 8 hours. Afterwards, standard charging time is 1.5 hours. Plug the adapter into the jack at the bottom of the device and into a wall outlet. The red indicator light shows charging. Do not charge at temperatures below 0°C or above 40°C.

Can the clipper be used cordless?

Yes, this clipper can be used corded or cordless. Once fully charged, it offers 90 minutes of battery life.

How to clean the clipper blades?

After each use, use the provided brush to remove hair trapped between the blades. You can also rinse the cutting unit and comb under warm running water. Dry thoroughly before lubricating with a few drops of oil.

How to change the cutting comb?

Make sure the power switch is in the OFF position. Press the comb button (as shown in image 12) to remove it, then attach the desired size comb (1, 2, or 3 mm).

What to do if the clipper does not turn on?

Check if the battery is charged. If it still doesn't turn on, plug in the AC adapter and try using it with the cord. If the problem persists, contact after-sales service.

Are the blades covered by warranty?

The blades are considered consumables and are not covered by the 2-year warranty. The warranty covers manufacturing defects under normal use conditions.

Can I use the clipper in the shower?

No, the clipper must be kept dry. Do not use it in the bath or shower. Never immerse it in water.

How to lubricate the clipper blade?

Add 2 to 4 drops of special lubricating oil between the fixed and moving blades after a few uses. This keeps the blades sharp and prolongs the device's lifespan.

Where to recycle the clipper at end of life?

Do not dispose of the device with household waste. It must be dropped off at a collection point for recycling electrical and electronic equipment in accordance with European Directive 2012/19/EU. Remove the battery before disposal.

How long does the battery last per charge?

Once fully charged, the battery lasts approximately 90 minutes. Standard charging time is 1.5 hours. To preserve the battery, avoid overcharging beyond the recommended time.

USER MANUAL JM-200A Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

PROFESSIONAL HAIR CLIPPER

USER MANUAL

MODEL: JM-200A

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands, and do

not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when placing an order with us if you are saving half compared to the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PROFESSIONAL

HAIR CLIPPER

MODEL: JM-200A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any changes in our product.

CORRECT DISPOSAL

This product is subject to the provisions of European Directive 2012/19/EU. The symbol showing a wheeled bin crossed out indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic equipment.

OVERVIEW

METHOD OF USE

1. Before use, drop the special lubricating oil on the blade (Fig. 1).
2. Push up the power switch to turn on the power supply of the shears.
3. Move the back along the scalp with electric scissors, and trim scalp to the appropriate length. Do not reverse the use of electric scissors, or you may overtrim.
4. Push down the power switch to turn off the power supply of electric shears.

Drop the special lubricating oil for the tool head here (Figure 1).

CLEANING AND MAINTENANCE

In order to make it more convenient for you to use the clipper, we recommend you to clean the clipper regularly, otherwise it will affect the performance and life of the clipper.

Regular cleaning and maintenance will keep the clipper in good condition and prevent the growth of odor and bacteria.

Keep the blade sharp.

1. Turn off the power supply of clipper and unplug the power cord.
2. Clean the body of the clipper with a clean cloth, clean the head and blade of the clipper with a cleaning brush, and then add a few drops of oil to the blade.
3. Clean up. Clippers should be kept in a dry and ventilated environment to extend their service life.

Drop the special lubricating oil for the tool head here.

PRECAUTIONS

1. Please follow the safety instructions, which may cause serious personal injury or even death due to short circuit, fire, electric shock, etc.
2. When charging is completed, please hold the charger by hand and pull it out from the socket. Please remember not to pull the charging cord.
3. The power adapter provided with the product shall be used to charge the product. When the power cord of the power adapter is damaged, or the adapter plug is not fully attached to the socket, do not use the power adapter for your personal safety. Be sure to replace with an original mode adapter to avoid danger.
4. Do not place heavy objects on the charging line or cause other objects to get stuck in the charging line, so as to avoid damage or deformation of the charging line.
5. Regularly remove dust from power outlets.
6. Please keep the appliance dry! Do not use wet hands to plug in or unplug the adapter. The adapter should avoid touching liquid.
7. Do not use thinners, benzene, essence, or alcohol to wipe utensils, otherwise it will cause discoloration.
8. This product is only used for repairing human hair. It cannot be used for any other purpose.
9. Before use, please check whether the blade is damaged or deformed.
10. Do not disassemble or modify the appliance by yourself. If the appliance cannot work normally, please submit the appliance to the dealer's authorized maintenance service center for inspection and repair. 12. The body is incomplete, the spirit has the disorder and lacks the relevant experience and the knowledge the person (including the child) must use under the guardian's supervision instruction, in order to avoid the occurrence danger.
11. In order to ensure the normal operation of the appliance, please charge it in the environment of 5°C~35°C. Please do not expose the appliance to direct sunlight, or place it near heating or other heat sources.
12. During normal use, the appliance may become slightly warm, which is normal. Please feel free to use it.
13. Before connecting the product, please ensure that the voltage indicated on the product matches the local power supply voltage.

WARRANTY REGULATIONS

1. This product has been manufactured under strict quality management and inspection.
2. If the machine fails during normal use, according to the product warranty, you can enjoy two free repairs at the place of purchase or at the factory repair center.
3. Within the warranty period, charges apply in the following cases:

1) Malfunctions caused by consumer misuse. 2) Malfunctions due to improper repair. 3) Malfunctions caused by natural disasters. 4) Malfunctions caused by moving or dropping the product after purchase. 5) Malfunctions caused by using non-original chargers. 6) Malfunctions caused by not using the product in accordance with this manual. 7) Damage caused by consumables. The lint remover's blade is a fragile part and is not covered by the warranty. Please present the warranty card and invoice when requesting repairs.

DISPOSAL

When the product no longer works, do not dispose of it with regular waste. Please send it to a designated recycling point to help protect the environment. Attention:

1) Please ensure the battery is removed from the machine before disposal. 2) The machine should be unplugged before removing the battery. 3) The battery should be disposed of safely. The rechargeable battery contains substances that may harm the environment. We recommend seeking advice from a retailer or our company to extend the life of the machine. When the decision is made to dispose of it, the battery must be removed by a government recycling center or an authorized maintenance center, and then placed in a designated location. Please dispose of it properly.

WARRANTY CARD

Product name
Product number
Purchase date
Customer Name
Customer address
Dealers
Sales address
Telephone number
End date
Checker
Date

Model: JM-200A

Power: 10W

Product input: DC 5V

FCC Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This product may cause harmful interference. 2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Manufacturer: Shanghai Muxin Muye Youxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and do

es not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PROFESSIONAL

HAIR CLIPPER

MODEL: JM-200A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any data updates on our product.

PROPER DISPOSAL

METHOD OF USE

Drop the special lubricating oil for the tool head here (Figure 1)

CLEANING AND MAINTENANCE

STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anar

Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and do

es not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when you are placing an order with us if you are a half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PROFESSIONAL

HAIR CLIPPER

MODEL: JM-200A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data on our product.

CORRECT DISPOSAL

METHOD OF USE

Drop the special lubricating oil for the tool head here (Figure 1)

CLEANING AND MAINTENANCE

PRECAUTIONS

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and do

not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PROFESSIONAL

HAIR CLIPPER

MODEL: JM-200A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data changes on our product.

CORRECT DISPOSAL

METHOD OF USE

Drop the special lubricating oil for the tool head here (Figure 1)

CLEANING AND MAINTENANCE

Drop the special lubricating oil for the tool head here

PRECAUTIONS

YH CONSULTING LIMITED. C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and do

es not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when you are placing an order with us if you are saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PROFESSIONAL

HAIR CLIPPER

MODEL: JM-200A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any data updates on our product.

CORRECT DISPOSAL

METHOD OF USE

Drop the special lubricating oil for the tool head here (Figure 1)

CLEANING AND MAINTENANCE

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and dos

es not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when you are placing an order with us if you are a half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PROFESSIONAL

HAIR CLIPPER

MODELL: JM-200A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

CORRECT DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL & ELECTRONIC EQUIPMENT)

METHOD OF USE

Drop the special lubricating oil for the tool head here (Figure 1)

CLEANING AND MAINTENANCE

Drop the special lubricating oil for the tool head here

PRECAUTIONS

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands and do

es not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when you are placing an order with us if you are a half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PROFESSIONAL

HAIR CLIPPER

MODEL: JM-200A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data on our product.

METHOD OF USE

Drop the special lubricating oil for the tool head here (Figure 1)

CLEANING AND MAINTENANCE

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to providing you tools with competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and do

not necessarily mean to cover all categories of tools offered by us. You are reminded to verify carefully when placing an order with us if you are saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PROFESSIONAL

HAIR CLIPPER

MODEL: JM-200A

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data changes on our product.

METHOD OF USE

Drop the special lubricating oil for the tool head here (Figure 1)

CLEANING AND MAINTENANCE

Imported in Australia: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported in the USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

PRECISION BEARD TRIMMER

USER MANUAL

MODEL: JM-200S

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD TRIMMER

MODEL: JM-200S

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any updates on our product.

This product is subject to the provisions of European Directive 2012/19/EU. The symbol showing a wheel crossed through indicates that the product requires separate refuse collection in the European Union. It applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

This product is subject to the provisions of European Directive 2012/19/EU. The symbol showing a wheeled bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

Keep the appliance dry. Not to be used in bath or shower. *This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

To prevent possible harm to the environment or human health from uncontrolled waste disposal, such as unused batteries and motors, recycle them responsibly to promote the sustainable reuse of material resources.

To return your used device, please use the return and collection system or contact the retailer where the product was purchased. They can take the product for environmentally safe recycling.

CAUTIONS

Clean the housing using only a cloth slightly dampened with water or a mild soap solution.

Never use a caustic solution.

Never submerge the clipper in water.

Keep away from children.

This clipper may become warm during operating and/or charging; this is normal.

When using, do not hold the power soft line, in order to prevent possible harm and avoid accidents.

Never tamper with moving parts.

Be sure to charge at least once within one year after purchase.

CHARGING:

Before using for the first time, please charge for 8 hours fully to charge the inside rechargeable batteries. Please do not charge if the temperature is lower than 0°C or higher than 40°C.

Please do not charge if it is nearby direct sunlight or a radiating heat source.

The standard charging time is 1.5 hours. In order to avoid damaging the batteries, please do not extend the charging time.

* When it's fully charged, it can be used for more than 90 minutes. During charging, the indicator light shows red.

* Push the switch button to ON, then it can be used.

PARTS IDENTIFICATION

1

2

3

4

5

6

7

1 Hair Trimmer 3 Comb (2mm) 5 Protection Cap 7 USB Cable

2 Comb (1mm) 4 Comb (3mm) 6 Cleaning Brush

HOW TO USE

* This hair trimmer can be used in both cord and cordless modes. * Put the adaptor connected with the jack of the battery pack which is at the bottom of the machine, then put the adaptor pins connected with power.

How to use the comb attachment

1. When loading and unloading the comb attachment, ensure the power switch is in the OFF position. Attached combs of 1, 2, and 3 mm are provided for different cutting lengths (picture 11).
2. Push the comb button (picture 12) to change the comb to another size.

Use the brush to clean the blade and remove any hair that may be caught between the blades. Lubricate the space between the stationary and moving blades with 2 or 4 drops of oil after every few uses.

CLEANING UNDER THE TAP

Clean the cutting element and comb under a warm tap after use (Fig. 15).

FCC Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This product may cause harmful interference. 2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Manufacturer: Shanghai Muxin Muye Youxian Gongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshanqu, Shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD TRIMMER

MODEL: JM-200S

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any data changes on our product.

PROPER DISPOSAL

1

2

3

4

5

6

7

① Hair Trimmer 3 Comb (2mm) 5 Protection Cap 7 USB Cable

② Comb (1mm) 4 Comb (3mm) 6 Cleaning Brush

HOW TO USE

How to use the comb attachment

MAINTENANCE OF THE BLADES

CLEANING UNDER THE TAP

Model: JM-200 S

Moc: 10W

STREET EASTWOOD NSW 2122 Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anar Place, Rancho Cucamonga, CA 91730

EC

REP

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD TRIMMER

MODEL: JM-200S

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data on our product.

CORRECT DISPOSAL

1

2

3

4

5

6

7

1 Hair Trimmer 3 Comb (2mm) 5 Protection Cap 7 USB Cable

2 Comb (1mm) 4 Comb (3mm) 6 Cleaning Brush

HOW TO USE

How to use the comb attachment

MAINTENANCE OF THE BLADES

CLEANING UNDER THE TAP

Model: JM-200 S

Power: 10W

Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

PRECISION BEARD TRIMMER

USER MANUAL

MODEL: JM-200 S

We continue to be committed to providing you tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands, and do not necessarily mean that all categories of tools offered are covered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD

TRIMMER

MODEL: JM-200S

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data changes on our product.

CORRECT DISPOSAL

1

2

3

4

5

6

7

① Hair Trimmer 3 Comb (2mm) 5 Protection Cap 7 USB Cable

2 Comb (1mm) 4 Comb (3mm) 6 Cleaning Brush

HOW TO USE

How to use the comb attachment

MAINTENANCE OF THE BLADES

CLEANING UNDER THE TAP

Model: JM-200 S

Power: 10 W

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD

TRIMMER

MODEL: JM-200S

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data on our product.

CORRECT DISPOSAL

1

2

3

4

5

6

7

1 Hair Trimmer 3 Comb (2mm) 5 Protection Cap 7 USB Cable

2 Comb (1mm) 4 Comb (3mm) 6 Cleaning Brush

HOW TO USE

How to use the comb attachment

MAINTENANCE OF THE BLADES

CLEANING UNDER THE TAP

Model: JM-200S

Power: 10W

Product input: DC 5V

FCC Information

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to providing you tools with competitive prices. "Save Half", "Half Price" or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD

TRIMMER

MODEL: JM-200S

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

3

4

5

6

7

1 Hair Trimmer 3 Comb (2mm) 5 Protection Cap 7 USB Cable

2 Comb (1mm) 4 Comb (3mm) 6 Cleaning Brush

HOW TO USE

How to use the comb attachment

MAINTENANCE OF THE BLADES

CLEANING UNDER THE TAP

Model: JM-200 S

Power: 10W

FCC Information

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD TRIMMER

MODEL: JM-200S

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any changes in our product data.

1

2

3

4

5

6

7

1 Hair Trimmer 3 Comb (2mm) 5 Protection Cap 7 USB Cable

2 Comb (1mm) 4 Comb (3mm) 6 Cleaning Brush

HOW TO USE

How to use the comb attachment

CLEANING UNDER THE TAP

Model: JM-200 S

Power: 10 W

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to providing you tools with competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean that all categories of tools offered are covered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD TRIMMER

MODEL: JM-200S

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of updates to our product data.

1

2

3

4

5

6

7

1 Hair Trimmer 3 Comb (2mm) 5 Protection Cap 7 USB Cable

2 Comb (1mm) 4 Comb (3mm) 6 Cleaning Brush

HOW TO USE

How to use the comb attachment

CLEANING UNDER THE TAP

Model: JM-200 S

Power: 10W

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion

House, London Road, Staines-upon-Thames, Surrey

TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

PRECISION BEARD SHAVER

USER MANUAL

MODEL: JM-T18

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD SHAVER

MODEL: JM-T18

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data on our product.

CORRECT DISPOSAL

This product is subject to the provisions of European Directive 2012/19/EU. The symbol showing a wheel crossed through indicates that the product requires separate refuse collection in the European Union. It applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

WARNING

Keep the appliance dry. Not to be used in bath or shower. *This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety;

*Children should be supervised to ensure that they do not play with the appliance.

*To prevent possible harm to the environment or human health from uncontrolled waste disposal, such as unused batteries and motors, etc., recycle them responsibly to promote the sustainable reuse of material resources.

*To return your used device, please use the return and collection system or contact the retailer where the product was purchased. They can take the product for environmentally safe recycling.

CAUTIONS

*Clean the housing using only a cloth slightly dampened with water and a mild soap solution.

*Never use a caustic solution.

*Never submerge the clipper in water.

*Keep away from children.

*This clipper may become warm during operation and/or charging. This is normal.

*When using, do not hold the power cord, in order to prevent possible harm and avoid accidents.

*Never tamper with moving parts.

*Be sure to charge at least once within one year after purchase.

CHARGING

Before using for the first time, please charge fully for 8 hours to activate the inside rechargeable batteries. Please do not charge if the temperature is lower than 0°C or higher than 40°C.

*Please do not charge if it is nearby direct sunlight or a heat source radiating.

The standard charging time is 2 hours. In order to avoid damaging the batteries, please do not extend the charging time.

*When it's fully charged, it can be used for more than 120 minutes. During charging, the indicator light shows red.

1

2

3

1 Shaver 2 Cleaning Brush 3 USB Charge Line

* If hair clipper cannot turn on, it is probably out of power. It needs to be fully charged first.

How to use

* This hair shaver can be used in both cord and cordless

* Put the adaptor connected with the jack of the battery pack lies at the bottom of the machine, then put the adaptor pins connected with the power.

*Push on the switch to activate the shaver.

FCC Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions:

1) This product may cause harmful interference. 2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party.responsible for compliance could void the user's authority to operate product.

Note: This product has been tested and found to comply with the limits for B digital device pursuant to Part 15 of the FCC Rules, These limits are des provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy, and if installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, Baoshan District, Shanghai 200000, CN.

Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD SHAVER

MODEL: JM-T18

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any data updates on our product.

CORRECT DISPOSAL

1

2

1 Shaver

2 Cleaning Brush

3 USB Charge Line

3

FCC Information

STREET EASTWOOD NSW 2122 Australia

Imported into the USA by: Sanven Technology Ltd. Suite 250, 9166 Anar Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent of savings you might benefit from buying certain tools with us compared top brands and does not necessarily mean to cover all categories of tools offered are kindly reminded to verify carefully when you are placing an order with us actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD SHAVER

MODEL: JM-T18

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data on our product.

CORRECT DISPOSAL

1

2

3

1 Shaver 2 Cleaning Brush 3 USB Charge Line

FCC Information

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

PRECISION BEARD SHAVER

USER MANUAL

MODEL: JM-T18

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price", or any other similar expressions used by us only represent the savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us to ensure you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD SHAVER

MODEL: JM-T18

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data changes on our product.

CORRECT DISPOSAL

1

2

1 Shaver

2 Cleaning Brush

3 USB Charge Line

3

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

PRECISION BEARD SHAVER

USER MANUAL

MODEL: JM-T18

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD SHAVER

MODEL: JM-T18

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any data changes on our product.

CORRECT DISPOSAL

1

2

3

1 Shaver 2 Cleaning Brush 3 USB Charge Line

FCC Information

Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to providing you tools with competitive prices. "Save Half", "Half Price" or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands, and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us whether you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD SHAVER

MODEL: JM-T18

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you if there are any technology or software updates on our product.

CORRECT DISPOSAL OF WASTE EQUIPMENT

2

3

1

1 Shaver 2 Cleaning Brush 3 USB Charge Line

FCC Information

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to provide you tools with competitive price. "Save Half", "Half Price" or any other similar expressions used by us only represent estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when you are placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD SHAVER

MODEL: JM-T18

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of data on our product.

1

2

3

1 Shaver 2 Cleaning Brush 3 USB Charge Line

FCC Information

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

We continue to be committed to providing you with tools at competitive prices. "Save Half", "Half Price" or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to top brands and does not necessarily mean to cover all categories of tools offered. We kindly remind you to verify carefully when placing an order with us that you are actually saving half in comparison with the top major brands.

VEVOR®

TOUGH TOOLS, HALF PRICE

PRECISION BEARD SHAVER

MODEL: JM-T18

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel free to contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of the user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you of any data updates on our product.

2

3

1

1 Shaver 2 Cleaning Brush 3 USB Charge Line

FCC Information

Imported in AUS: SIHAO PTY LTD. 1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Imported in USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69, 60329 Frankfurt am Main

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey TW18 4AX

VEVOR®

TOUGH TOOLS, HALF PRICE

www.vevor.com/support