FM60X - Skin care device Vevor - Free user manual and instructions

Product Type	LED Light Therapy Face Mask
Model	FM60X
Brand	Vevor
Number of LEDs	222 LEDs (74 LED bulbs, 3 LEDs per bulb)
Light Spectra	630 nm, 660 nm, 850 nm (customizable wavelengths)
Mask Material	Flexible silicone
Mask Dimensions	300 mm (W) x 195 mm (H)
Weight (approx.)	Approximately 300 g
Power Supply	5 V / 1 A / 2500 mAh via USB-C
Program Duration	10 minutes per session
Operating Temperature	0 °C to 40 °C
Storage Temperature	-5 °C to 55 °C
Main Functions	Anti-aging, skin rejuvenation, wrinkle reduction, treatment of mild to moderate acne, skin tone improvement, hydration, pore refinement, inflammation reduction, relief of muscle and joint pain, wound healing
Included Accessories	Flexible face mask, controller, power adapter (country-specific), USB-C to USB-A cable, head straps, carrying bag, charger
Care and Cleaning	Clean with a soft, dry cloth before each use. Do not use liquids. Store at room temperature in a dry place away from direct sunlight.
Safety	Do not use on infants, sleeping or unconscious persons. Do not exceed 20 minutes per session. Avoid contact with water. Unplug if liquid is present. Do not use on open wounds. Consult a doctor if you have light sensitivity, lupus, photosensitive eczema, or leukemia. Stop if redness persists for more than 2 hours.
Spare Parts and Repairability	No user-serviceable parts. Do not disassemble or modify. For technical support, contact Vevor via www.vevor.com/support. Electronic warranty available.
Compliance	Complies with Part 15 of the FCC rules (Class B). Comes with an electronic warranty certificate.
General Information	Manufactured by Shanghaimuxinmuyeyouxiangongsi, Shanghai, China. Imported into Australia by SIHAO PTY LTD, into the United States by Sanven Technology Ltd. Brand VEVOR: tough tools at half price.

Frequently Asked Questions - FM60X Vevor

How to use the Vevor FM60X LED mask?

Connect the mask to the controller and power adapter via the USB-C cable. Place the mask on your cleansed face and secure it with the straps. Press the button on the controller to start the 10-minute program. Use the mask 3 to 5 times per week for optimal results. Refer to the complete manual for more details.

What are the benefits of red and near-infrared light therapy?

Red light (630-660 nm) and near-infrared light (850 nm) therapy stimulate collagen production, reduce inflammation, improve circulation, promote healing, decrease wrinkles and fine lines, and treat mild to moderate acne. It also helps relieve muscle and joint pain.

What are the contraindications for using the FM60X?

Do not use this product if you have lupus erythematosus, photosensitive eczema, leukemia, severe migraines, or a history of light-induced seizures. Consult a doctor if you are pregnant, have epilepsy, or are taking photosensitizing medications.

How long does a therapy session last?

Each session lasts 10 minutes per program. It is recommended not to exceed 20 minutes per use. You can do one session per day, ideally 3 to 5 times per week.

How to clean and maintain the LED mask?

Before each use, clean the mask with a soft, dry cloth. Never use water or liquid products. After use, store the mask in the provided carrying bag at room temperature away from direct sunlight.

Is the mask suitable for all skin types?

Yes, the mask is suitable for all skin types, including sensitive skin. However, if you have very reactive skin or skin conditions, test on a small area before full first use. Stop if redness persists.

Can I use the mask on other parts of the body?

The mask is designed for the face, but you can also use it on the neck, décolletage, hands, or other body areas if the surface is suitable. Ensure the light covers the treated area well.

What to do if the mask overheats or malfunctions?

If the mask overheats, stop using it immediately and unplug it. Do not use the device if the cable, controller, or mask is damaged. Contact Vevor technical support via www.vevor.com/support for assistance.

Is the product safe for children?

This product is not a toy. Children under 8 years old should not use it. Children aged 8 and older can use it under adult supervision after receiving safety instructions. Never leave children unattended during use.

Where can I find the complete manual and technical support?

The complete manual in PDF format is available for free on notice-facile.com. For technical questions or to obtain an electronic warranty certificate, visit www.vevor.com/support.

USER MANUAL FM60X Vevor

Technical Support and E-Warranty Certificate www.vevor.com/support

LED FACE THERAPY

MODEL: FM60;FM60X

We continue to be committed to provide you tools with competitive price.

"Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings you might benefit from buying certain tools with us compared to the top brands and does not necessarily mean to cover all categories of tools offered by us. are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major bran

VEVOR®

TOUGH TOOLS, HALF PRICE

LED FACE

THERAPY

Model: FM60 FM60X

NEED HELP? CONTACT US!

Have product questions? Need technical support? Please feel fr contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instruction carefully before operating. VEVOR reserves a clear interpretation user manual. The appearance of the product shall be subject to product you received. Please forgive us that we won't inform you there are any technology or software updates on our product.

IMPORTANT USE PRECAUTIONS

WARNING:

1. This product is not a toy. Do not allow children to play with or approach the item.
2. Use as intended only. Do not stand on the product.
3. TO AVOID ELECTRICAL SHOCK, DO NOT put liquid of any kind into the Main Unit Housing containing the electrical components.
4. When installing and using, check whether the nails installed on the wall are firm.
5. For your safety, please do not disassemble or modify the product.

SAFETY INSTRUCTIONS, WARNINGS, AND DISCLAIMER

SUPERVISION

1. DO NOT use this device on infants.
2. DO NOT let sleeping, disabled, or unconscious persons use the device.
3. DO NOT exceed 20 minutes of use in one therapy session.
4. DO NOT use on open, fresh wounds.
5. DO NOT use in combination with liniments, salves, ointments, or balms that contain heat-producing ingredients. A skin burn could be the result of doing so.
6. DO NOT modify or attempt to repair this equipment. There are no parts that are serviceable by the user.

This device is an electrical device. To avoid electric shock and other electricity-related dangers, adhere to the following instructions:

1. DO NOT wash electrical parts with water or other liquids.
2. DO NOT apply or touch the device to, or with, wet or damp skin.
3. DO NOT pull, carry, or lift the device by its cord. If the cord is damaged, do not use the device.
4. DO NOT use on or near heated surfaces.
5. DO NOT operate this device in areas where it could be exposed to flame or combustible products or vapours. Explosion or fire may occur.
6. DO NOT store your device in hot temperatures exceeding 140 degrees Fahrenheit.
7. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

The product is constantly being upgraded, and there will be notification if there is any change.

SAVE THESE INSTRUCTIONS

FCC Information

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1) This product may cause harmful interference. 2) This product must accept any interference received, including interference that may cause undesired operation.

WARNING:

Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note:

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy, and if installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for assistance.

THE BENEFITS OF RED LIGHT THERAPY FOR DIVERSE CONDITIONS

A few of the scientifically proven results of red light therapy investigated thus far include:

1. Reduced Inflammation

Near-infrared light reduces overall inflammation in the body by decreasing the presence of inflammatory markers. This reduction can help ease the symptoms associated with joint pain, sore muscles, autoimmune diseases, arthritis, traumatic brain injuries, and spinal cord injuries.

2. Reduced Pain

In one clinical study, neuropathic pain caused by a spinal cord injury was dramatically reduced by the application of red light treatment. Scientists conducting the study referred to it as “an exciting prospect with significant clinical relevance.” Near-infrared light wavelengths reduce overall pain by easing joint stiffness and soreness, diminishing inflammation, easing muscle spasms and enhancing blood flow.

3. Reduced recovery times after training and injury

For high-performance athletes (and those who train like them), red light therapy can help accelerate muscle repair following fatigue and injury. Mitochondria within cells are particularly responsive to red light therapy, and muscle cells are exceptionally rich in mitochondria. Red light therapy may additionally stimulate stem cells, further assisting in muscle recovery.

Healthier, plumper-looking skin due to increased collagen production.

Red light therapy can dramatically transform the skin.

Red light wavelengths in particular target the mitochondrial chromophores within skin cells, generating the production of collagen proteins. Collagen stimulation yields more holistic and enduring benefits than simply resurfacing the outer layer of the skin. Stem cells may also be activated, increasing tissue repair. This leads to accelerated healing and wound repair, improved appearance in hypertrophic scars, a reduction in fine lines and wrinkles, and improved skin texture.

Participants in one study experienced a clinically assessed improvement in skin complexion and collagen density. Improved circulation (improved blood flow). In many studies, red light therapy has been clinically proven to increase the diameter of blood vessels and to improve circulation. Additionally, red light therapy protects red blood cells against oxidative stress and limits platelet loss during surgical procedures.

4. What types of light are there and what do they do?

Antiaging, rejuvenation, and perfecting your complexion: fine lines, loss of elasticity, dehydration, large pores, dull, uneven tone or sun-damaged skin, use combined red and NIR light on your face, neck, chest, and hands.

Heals & relieves:

√ Psoriasis √ Muscle & joint pain √ Thins & delicate skin, wounds, burns & red scars

To regulate sebum and reduce and control mild to moderate acne, add blue to the combo.

Red & NIR

Antiaging, rejuvenation, and perfecting your complexion: fine lines, loss of elasticity, dehydration, large pores, dull, uneven tone or sun-damaged skin, use combined red and NIR light on your face, neck, chest, and hands.

Rejuvenates & perfects:

√ Brightens & hydrates √ Firms, tones & depuffs √ Smooths bumps & wrinkles √ Clarifies redness & refines pores √ Fades fine lines, spider veins, dark spots & scars

And use red and NIR again for psoriasis and wound healing such as sunburn, open wounds, and red scars, thin and vulnerable skin, and muscular or joint relief on your face, body, and scalp.

Heals & relieves:

√ Psoriasis √ Muscle & joint pain √ Thin & delicate skin, wounds, burns & red scars

Blue, Red & NIR

To regulate sebum and reduce and control mild to moderate acne, add blue light to the combo.

Mild to moderate acne:

√ Kills acne-causing bacteria √ Regulates sebum/oily T-zone √ Controls & heals blemishes, spots & comedones

NIR

Use NIR for dry, tight, flaky, and rough skin, redness such as diffused redness and visible capillaries, or compromised, thin and vulnerable skin.

Sensitive skin:

√ Diffused redness √ Visible capillaries √ Dry, tight, flaky, or rough skin √ Compromised, thin or vulnerable skin

Red

Use red for hyperpigmentation (dark spots) on your face caused by medicines, hormones, and post-inflammatory hyperpigmentation (PIH).

Hyperpigmentation & dark spots caused by:

√ Medicines √ Hormones √ Post-inflammatory hyperpigmentation (PIH)

Product Introduction

FM60

Technical Specifications

LED Spectra: 630nm&660nm&850nm

Color: Black

Number of LEDs: 222 LEDs (3 per LED bulb, 74 LED bulbs)

Face Mask Size: 300mm (W) x 195mm (H)

Program time: 10 minutes

Electrical output: 5V/1A/2500mAh

Operating Temperature: 0°C to 40°C

Storage and Transport Temperature: -5°C to 55°C

Model

1. High-end, Mid-range, Low-end

Device Description

1. Silicon flexible face mask
2. Controller
3. Power supply and country-specific adaptors
4. USB-C to USB-A connector
5. Head straps
6. Carry bag
7. Charger

FM60X

Technical Specifications

LED Spectra: 630nm & 660nm & 850nm or customized wavelengths

Color: Black

Material: Silicone rubber

Number of LEDs: 222 LEDs (3 per LED bulb, 74 LED bulbs)

Face Mask Size: 300mm (W) x 195mm (H)

Program time: 10 minutes

Electrical output: 5V/1A/2500mAh

Operating Temperature: 0°C to 40°C

Storage and Transport Temperature: -5°C to 55°C

Device Description

1. Silicon flexible face mask
2. Controller
3. Power supply and country specific adaptors
4. USB C to USB A connector
5. Head straps
6. Carry bag
7. Charger

2

5

3

2

6

Contraindications

Stop using this device facial mask if you encounter any prolonged skin redness or discomfort that lasts for more than 2 hours.

If a problem occurs for more than 2 hours, you might be light sensitive, or have another condition. We recommend you consult with a medical professional for advice.

1. Please do not use this product if you have lupus erythematosus, photosensitive eczema, or leukemia. Otherwise, it may cause severe skin reactions.
2. Please do not use this product if you are sensitive or dizzy to light. Otherwise, it may cause severe skin reactions. Contraindications
3. It is recommended not to use this product if you have migraine.
4. Please do not use this product if you have a history of seizures caused by light.

Warnings

Safety warning:

1. Please ensure the USB port is linked to the plug adapter before plugging in the power source.
2. Do not place the device in spots with water or dripping water. Please unplug the power and stop using immediately if the device has liquid or water on it.
3. If the mask light is scratched or intruded by liquid, please stop using it immediately.
4. Do not use the mask when in the sauna or in the rain.
5. Keep the mask or wires away from heat sources.
6. If the mask, controller, or wire is damaged, please do not use it again.
7. Do not pull the USB cable forcefully, in case the mask cable falls off.
8. Please stop using the mask when it is overheated.
9. Do not let children use the mask without supervision.

Care and Maintenance

Store this device (FACE MASK) system at room temperature in dry conditions. Use the carry bag provided.

Before each use, with the device switched off, clean the facemask following the cleaning instructions below.

Avoid storing this device LED system in dusty conditions, in direct sunlight, or in damp and humid conditions.

CORRECT DISPOSAL

This product is subject to the provisions of European Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to

a collection point for recycling electrical and electronic devices.

BATTERY DISPOSAL

To minimize hazards to health and the environment at the end of the product's life, laws dealing with Waste Electrical and Electronic

Equipment (WEEE) and the Waste Battery Directive require you to dispose of this product at a suitable collection facility where it will be sent in order to remove the batteries and for appropriate recycling. Please contact your local authorities for more details on recycling and safe disposal of these in your area.

Manufacturer: Shanghaimuxinmuyeyouxiangongsi

Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.

Imported to AUS: SIHAO PTY LTD.

1 ROKEVA STREET, EASTWOOD NSW 2122, Australia

Imported to USA: Sanven Technology Ltd.

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited, Office 147,

Centurion House, London Road, Staines-

upon-Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr. 69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical Support and E-Warranty Certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Model

1. High-end 2.Mid-range 3.Low-end

2

5

3

2

6

Contraindications

Office 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REPRÉSENTANT DU ROYAUME-UNI

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

REPRÉSENTANT CE

E-CrossStu GmbH

Mainzer Landstr.69,

Model

1. High-end 2.Mid-range 3.Low-end

FM60X

2

5

3

2

6

Contraindications

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

NEED HELP? CONTACT US!

Model

1. High-end 2.Mid-range 3.Low-end

Imported into AUS: SIHAO PTY LTD.

1 ROKEVA STREETEASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

REP. DEL

REGNO UNITO

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

REP.CE

E-CrossStu GmbH

Mainzer Landstr.69,

Model

1. High-end 2.Mid-range 3.Low-end

FM60X

2

5

3

2

6

Contraindications

1 ROKEVA STREET ASTWOOD NSW 2122 Australia

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

REPRESENTANTE DE LA CE

E-CrossStu GmbH

Mainzer Landstr.69,

NEED HELP? CONTACT US!

Model

1. High-end 2. Mid-range 3. Low-end

Device description 1.

Device description 1.

1 ROKEVA STREET EASTWOOD NSW 2122 Australia

Import to USA: Sanven Technology Ltd.

Apartment 250, 9166 Anaheim Place, Rancho Cucamonga, California 91730

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

REPREZENT KE

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

SAFETY INSTRUCTIONS, WARNINGS AND DISCLAIMER

OVERVIEW

Model

1. High-end 2. Mid-range 3. Low-end

FM60X

Technical specifications

2

5

3

2

6

Contraindications

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE

Technical support and e-warranty certificate www.vevor.com/support

VEVOR®

TOUGH TOOLS, HALF PRICE

NEED HELP? CONTACT US!

Model

1. High-end 2.Mid-range 3.Low-end

Device description 1.

Silicone flexible face mask

FM60X

Technical specifications

LED Spectra: 630nm & 660nm & 850nm or

Device description 1.

Silicone flexible face mask

2

5

3

2

6

Contraindications

Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

UK

REP

YH CONSULTING LIMITED.

C/O YH Consulting Limited Office 147,

Centurion House, London Road, Staines-upon-

Thames, Surrey, TW18 4AX

EC

REP

E-CrossStu GmbH

Mainzer Landstr.69,

60329 Frankfurt am Main.

VEVOR®

TOUGH TOOLS, HALF PRICE