JC-88E/HC - Wine cellar N8WERK - Free user manual and instructions
Find the device manual for free JC-88E/HC N8WERK in PDF.
User questions about JC-88E/HC N8WERK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Wine cellar in PDF format for free! Find your manual JC-88E/HC - N8WERK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JC-88E/HC by N8WERK.
USER MANUAL JC-88E/HC N8WERK
GEFAHR-STROMSCHLAG- GEFAHR
Symbols and Labels 11
Signal Words 11
Intended Use 12
Safety Notices 12
Before Putting into Operation 14
Putting Into Operation 14
Inserting / Removing Shelves 15
Operation 15
The Correct Drinking Temperature 16
Cleaning and Storage 16
Troubleshooting 17
Warranty and Limitations of Liability 17
Technical Data 18
Variants 18
Disposal 18
ITEMS SUPPLIED
Winefridge1x
Shelf 2 - 6× (depending on the size of the fridge, see "Technical Data")
Operating instructions 1 x
Check the items supplied for completeness and the components for transport damage. If you find any damage, do not use the device but contact our customer service department.
Remove any possible films, stickers or transport protection from the device.
Never remove the rating plate and any possible warnings!
AT A GLANCE
Device (Picture A)
1 Control panel with display
2 Fridge
3 Glass door
4 Shelves
5 Height-adjustable base
6 Drip tray (on the back)
7 Handle for opening the glass door
Control Panel (Picture B)
8 (Light On / Off)
9 (Change the temperature unit ^ C / ^ F
10 Display
11 (Increase temperature)
12 (Decrease temperature)
11 + 12 pressed together for approx.
5 seconds = unlock the lock on the control panel
Dear Customer,
We are delighted that you have chosen the N8WERK wine fridge and hope you have a lot of fun with it.
If you have any questions about the device and about spare parts/accessories, contact the customer service department via our website: n8werk.com
Information About the Operating Instructions
Before using the device for the first time, please read through these operating instructions carefully and keep them for future reference and other users. They form an integral part of the device. The manufacturer and importer do not accept any liability if the information in these operating instructions is not complied with.
SYMBOLS AND LABELS
Danger symbols: These symbols indicate possible dangers. Read the associated safety notices carefully and follow them.
Supplementary information
Read the operating instructions before use!
Alternating current
Suitable for use with food.
Warning of flammable substances (refrigerant)
Do not replace the LEDs yourself. They must be replaced by an expert.
SIGNAL WORDS
Signal words indicate hazards if the associated notices are not followed.
DANGER - high risk, results in serious injury or death
WARNING - medium risk, may result in serious injury or death
CAUTION - low risk, may result in minor or moderate injury
NOTICE - may result in risk of damage to material
INTENDED USE
This device is intended to be used to cool standard Bordeaux, Burgundy or tall bottles or other beverages in similar bottles.
The device is not suitable for use as a built-in device.
The device is not suitable for freezing food.
The device is not designed to be operated with an external timer or a separate remote control system.
The device is for personal use only and is not intended for commercial or domestic-like applications, e.g. in hotels, bed and breakfasts, offices, staff kitchens or similar places.
Use the device only for the specified purpose and only as described in the operating instructions. Any other use is deemed to be improper.
SAFETYNOTICES
Warning: Note all safety notices, instructions, illustrations and technical data provided with this device. Failure to follow the safety notices and instructions may result in electric shock, fire and / or injuries.
This device may be used by children aged 8 and over and by people with reduced physical, sensory or mental abilities or a lack of experience and/or knowledge if they are supervised or have received instruction on how to use the device safely and have understood the dangers resulting from failure to comply with the relevant safety precautions.
Children must not play with the device.
- Cleaning and user maintenance must not be carried out by children, unless they are older than 8 years of age and are supervised.
Children younger than 8 years of age and animals must be kept away from the device and the connecting cable.
Warning of flammable substances! This device uses a refrigerant (R600a) and an insulation gas (cyclopentane). These substances may ignite.
WARNING: Do not close up ventilation openings in the device housing.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not operate any electrical devices within the refrigerator compartment that do not correspond to the type recommended by the manufacturer.
- Do not store any potentially explosive substances, such as aerosol cans containing a flammable propellant, in this device.
- Never immerse the device and the connecting cable in water or other liquids and ensure that these components cannot fall into water or become wet.
The device must always be disconnected from the mains power before it is cleaned.
- Do not make any modifications to the device. Do not replace the connecting cable yourself. If the device or the connecting cable are damaged, they must be replaced or repaired by the manufacturer, customer service department or authorised distributors in order to avoid any hazards.
It is essential to follow the instructions in the "Cleaning and Storage" chapter.
DANGER - DANGER OF ELECTRIC SHOCK
Use and store the device only in closed rooms.
If the device falls into water while it is connected to the mains power, pull the mains plug out of the plug socket immediately. Only after this should you retrieve the device from the water.
- Never touch the device and the connecting cable with wet hands when the device is connected to the mains power.
WARNING - DANGER OF FIRE
- Do not operate the device in the vicinity of combustible material. Do not place any combustible materials (e.g. card
board, paper, wood, plastic) in or on the device.
- Do not cover the device during operation.
In the event of a fire: Do not extinguish with water! Smother the flames with e. g. a fireproof blanket.
WARNING - DANGER OF INJURY
- Keep the packaging material away from children and animals. There is a danger of suffocation.
Make sure that the connecting cable is always kept out of the reach of children and animals. There is a danger of strangulation.
NOTICE - RISK OF DAMAGE TO MATERIAL AND PROPERTY
If a fault occurs during operation, pull out the mains plug. Otherwise always switch off the device first before the mains plug is pulled out.
Always pull the mains plug and never the mains cable when disconnecting the device from the mains power.
- Disconnect the device from the mains power before a thunderstorm or when there is a power cut.
- Do not pull or carry the device by the connecting cable.
- Protect the device from: heat sources, flames, sub-zero temperatures, persistent moisture, direct sunlight or impacts.
- Keep the device in a dry place at temperatures of between 0 and 40^ .
- Never place heavy objects on the device or the connecting cable.
Use only original accessories from the manufacturer in order to guarantee that there is no interference that may prevent the device from working and to avoid possible damage.
The LEDs cannot be replaced by you! The normal lifespan of the LEDs depends on their real use. However, they should not usually need to be replaced. If one of the LEDs does stop working, contact the customer service department. Do not attempt to replace an LED yourself. The device could be damaged.
After the device has been transported, leave it upright for at least 4 hours before it is connected to the mains power. The refrigerant may flow out of the compressor if it is tipped or transported on its side. It takes a while to flow back again. If the fridge is put into operation before this, the compressor may be damaged.
WARNING: When the device is set up, it must be ensured that that the connecting cable is not jammed or damaged.
Make sure that the connecting cable does not present a trip hazard. It may not hang down from the surface on which the device is placed in order to prevent the device from being pulled down.
Only connect the device to a plug socket that is properly installed and matches the technical data of the device. The plug socket must also be readily accessible after connection so that the connection to the mains can quickly be isolated.
WARNING: Do not place portable multiple sockets or mains adapters on the back of the device.
- Do not connect the device along with other consumers (with a high wattage) to a multiple socket in order to prevent overloading and a possible short circuit (fire).
- Do not use the device in conjunction with extension cables.
-
Fully unwind the connecting cable.
-
Set up the device with a clear space at all sides (at least 20~cm ) and clear space above it (at least 30~cm ) on a flat, solid, heat-resistant and resilient surface. Leave at least 45~cm of space at the front so that the glass door (4) can be opened without any problem.
- The ambient temperature at the installation location should be no more than 23 - 26^ (73.4 - 78.8^) and no less than 10 - 14^ to ensure that the device works in the optimum way.
- Connect to a plug socket. A beep is heard, the control panel (1) switches on and the display (10) shows the temperature currently prevailing in the fridge.
After the device is switched on, it takes approx. 2 - 3 hours for the device to reach the correct temperature. During this time, keep the glass door closed and only place wine bottles inside the device once it has reached the correct temperature.
INSERTING / REMOVING SHELVES
The wine fridges each have a different number of shelves (3). Depending on the model, they are inserted as follows:
The model for 15 bottles (03965) has two shelves of equal size that can be inserted in any position.
The model for 20 bottles (03962) has 4 shelves. The two large ones are placed in the middle of the fridge, the smallest shelf goes right at the bottom and the last one right at the top.
The model for 28 bottles (03963) has 6 shelves. Four of them are identical in size and fit in the middle four slots, the smal
lest shelf goes right at the bottom and the last one right at the top.
Make sure that the glass door (4) is fully open when you insert or remove shelves.
OPERATION
If the door is opened for a lengthy period of time, this may cause the temperature inside the compartments of the device to rise considerably.
Regularly clean the surfaces that may come into contact with foodstuffs and accessible drainage systems.
UNLOCKING THE LOCK ON THE CONTROL PANEL
The device has an automatic lock on the control panel which prevents the temperature on the device from being adjusted.
The lock must be unlocked to make any settings.
To unlock the lock, hold down the buttons (11) and (12) for approx. 5 seconds. A beep is heard and the lock is deactivated.
If no more settings are made, the lock is automatically activated again after approx. 20 seconds.
SWITCHING THE LIGHT ON / OFF
The light in the fridge can be switched on using the button (8). The light stays permanently switched on.
CHANGING THE TEMPERATURE UNIT
Use the button (9) to set the display (10) to ^ C or ^ F as you wish.
SETTING THE TEMPERATURE
The temperature can be set from 4 - 18^ (39.2 - 64.4^)
Use the buttons (11) and (12) to set the temperature you want. During setting mode, the set temperature flashes on the display (10) for approx. 5 seconds.
The fridge cools to the temperature you want and the display always shows the currently prevailing temperature as it does this.
THE CORRECT DRINKING TEMPERATURE
Many wine bottles have a recommendation for the drinking temperature on them. The following table can be regarded as a recommendation for the most common types of wine:
| Wine Characteristic Temperature | ||
| Sparkling wine or chamagne | Sweet to dry | 4 - 8°C / 39 - 47°F |
| White wine | Young, dry 9 to 11°C / 48.2 to 51.8°F | |
| Spicy, aromatic (Sauvignon Blanc, Gewürztraminer) | 10 to 12°C / 50 to 53.6°F | |
| Mature (5 years or more) 10 to 12°C / 50 to 53.6°F | ||
| Medium-dry or lots of residual sugar 12 to 14°C / 53.6 to 57.2°F | ||
| Red wine | Bold, strong 18°C / 64.4°F | |
| Everyday wines, medium-strong 16 to 18°C / 60.8 to 64.4°F | ||
| Young and light 14 to 16°C / 57.2 to 60.8°F | ||
| Very fruity (very young Beaujolais, light Vernatsch) | 12 to 14°C / 53.6 to 57.2°F | |
CLEANING AND STORAGE
Please Note!
- Do not use any flammable liquids for cleaning as they may cause an explosion or fire.
- Do not use any sharp or abrasive cleaning agents or cleaning pads to clean the device. These may damage the surfaces.
Wipe down the device and the shelves (3) with a damp cloth if necessary.
Regularly check whether there is any liquid in the drip tray (6) and wipe it out with a dry cloth if necessary.
Check the connecting cable regularly for any damage.
STORAGE
If the cooling device is left empty for a lengthy time, switch off the device, disconnect it from the mains power, clean it and leave the door open to prevent mould from forming.
Store the device in a dry, clean, frost-free place that is protected from direct sunlight and cannot be accessed by children or animals.
TROUBLESHOOTING
If the problem cannot be solved with the steps below, contact the customer service department.
Do not attempt to repair an electrical device yourself!
The device cannot be switched on.
The mains plug is not inserted in the plug socket correctly.
Correct the fit of the mains plug.
The plug socket is defective.
Try another plug socket.
There is no mains voltage.
Check the fuse of the mains connection.
WARRANTY AND LIMITATIONS OF LIABILITY
The warranty does not cover faults caused by incorrect handling, damage or attempted repairs. The same applies to normal wear and tear.
We do not accept any liability for damage or consequential damage resulting from:
○ failure to follow the operating instructions
improper or unsuitable handling
○ repairs which are not carried out properly
unauthorized modifications
O use of outside parts or spare parts
- use of unsuitable additional parts or accessories
The device does not cool sufficiently.
The room temperature is too high.
If the ambient temperature is too high, this can impair the cooling of the device. The ideal ambient temperature is from 23 - 26^
The door (4) has been opened too often.
Opening the door too frequently should be avoided to ensure that the cold air remains inside the fridge.
During use, an unpleasant smell is detected.
The device is being used for the first time.
A smell often develops when new devices are first used. The smell should disappear once the device has been used several times.
TECHNICAL DATA
Power supply: 220 - 240V 50Hz
Power: 85 W
Protection class: I
Climate class: N, SN
Temperature range: 4 - 18^ (39.2 - 64.4°F)
ID of operating instructions: Z 03962_03963_03965 M N8W V2 1123 uh
VARIANTS
Article number: 03965 03962 03963
Model number: JC-46E/HC JC-62E/HC JC-88E/HC
Refrigerant: R600a (17 g) R600a (25 g) R600a (34 g)
Insulation gas: Cyclopentane Cyclopentane Cyclopentane
Capacity: max. 15 bottles (0.75 litre each)
max. 20 bottles (0.75
max. 28 bottles (0.75
Useful volume: 46 litres
litre each)
litre each)
Shelves: 2
62 litres
88 litres
DISPOSAL
4
6
This device contains a refrigerant and an insulation gas. Make sure that the device is disposed of in accordance with the local regulations.
Dispose of the packaging material in an environmentally friendly manner so that it can be recycled.
The adjacent symbol (crossed-out bin underlined) means that used devices should not be disposed of in the domestic waste, but should instead be taken to special collection and return systems.
Owners of used devices must remove from the used device any used batteries or rechargeable batteries which are not encapsulated by the used device and can be removed in a non-destructive way and dispose of them separately (see also the section on battery disposal).
Owners of used devices from private households can take them free of charge to the collection points of the public waste disposal authorities or the disposal points which are set up by manufacturers and distributors under the Electrical Equipment Act so that they can be disposed of in an environmentally friendly way and valuable raw materials can be recovered. If they are not disposed of properly, toxic ingredients may escape into the environment and cause harm to the health of humans, animals and plants. Businesses which market electrical and electronic devices are also obliged to take back used devices.
Waste prevention makes an even more valuable contribution to protecting the environment. This means if possible, as well as continuing to use or repair a device yourself, passing it on to another user also represents an ecologically beneficial alternative to disposal.
All rights reserved.
SOMMAIRE
Composition 19
Apercu general 19
Appareil (illustration A)
Chere cliente, cher client,
Volume utile: 46 litri
Ripiani 2
