BBCrew - Saucepan Skandika - Free user manual and instructions
Find the device manual for free BBCrew Skandika in PDF.
| Product type | Enameled cast iron casserole (Dutch Oven) |
| Brand | Skandika |
| Model | BBCrew |
| Material | Enameled cast iron |
| Usage | All heat sources (gas, electric, ceramic, induction) |
| Main functions | Stewing, braising, roasting, slow cooking |
| Number of pieces | 1 casserole + 1 lid |
| Cleaning | Hand washing recommended (hot water and dish soap, nylon brush) |
| Dishwasher | Possible but may dull the enamel |
| Safety | Do not heat empty; use heat-resistant gloves; let cool before cleaning |
| Warranty | 24 months from delivery |
| Customer service | service@skandika.de | MAX Trader GmbH, Wilhelm-Beckmann-Str. 19, 45307 Essen, Germany |
| Country of manufacture | Not specified |
| Dimensions | Approx. 30 cm diameter (estimated) |
| Weight | Approx. 5 kg (estimated) |
Frequently Asked Questions - BBCrew Skandika
User questions about BBCrew Skandika
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Saucepan in PDF format for free! Find your manual BBCrew - Skandika and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BBCrew by Skandika.
USER MANUAL BBCrew Skandika
07 Safety note
07 Before first use
08 Use and care
08 How do I clean my Dutch Oven?
09 Guarantee conditions
Please visit the Skandika Service portal on our website for FAQs and downloadable instructions. For more information about Skandika, simply visit our main page www.skandika.com
Tips for use and care
Please read the following instructions carefully before using it for the first time and follow the directions and instructions for use. If you follow this advice, you can use the enamelled cast iron pots for a lifetime.
SAFETY NOTE

Attention: The Dutch Oven gets extremely hot on all parts during use. To avoid burns, only lift the lid with heat-resistant gloves or a special lid lifter. Never touch or carry the pot during use without heat protection. Always place the Dutch Oven on a suitable, heat-resistant surface and do not quench it with cold water.

Before first use
Before using the pot for the first time, be sure to clean it thoroughly with hot water and washing-up liquid. Rinse carefully and dry off. Dishwasher cleaning is possible. However, it can dull the enamelled finish over time. This is harmless and does not affect the cooking properties. We therefore recommend cleaning by hand with warm soapy water and a nylon brush to preserve the original appearance and enamel finish optimally.
Important! Do not burn in!
Otherwise, the enamelled coating will be damaged.
Use and care
The pot is not suitable for dry cooking. Therefore, always pour in as much liquid (oil, butter or water) as necessary to completely cover the pot base before heating up. Never heat up empty or dry. Cast iron, with its intense heat retention, works best when heated and cooled gradually. Use low to medium heat for cooking to avoid damage to the pot or the coating. Never place the hot pot on a worktop or other surface without protection – also avoid moving it back and forth on delicate surfaces. Do not stack with other pots and pans for storage to avoid scratching or chipping. Enamelled cast iron is exceptionally durable but can be damaged if accidentally dropped or banged against a solid surface. This is not covered by the guarantee.
How do I clean my Dutch Oven?
Always allow the hot pot to cool down before cleaning, otherwise thermal shock can occur and the material may warp or, in the worst case, crack. All you need for cleaning is warm water and a little washing-up liquid. Stubborn encrustations can be soaked in soapy water and then removed with a nylon scraper. To avoid damaging the enamel, do not use pot cleaning pads with metal fibres or sharp abrasives. Dry completely before storing.
And now have fun with your new Dutch Oven
Guarantee conditions
For our devices we provide a warranty as defined below.
- In accordance with the following conditions (numbers 2-5) we repair defect or damage to the device free of charge, if the cause is a manufacturing defect. Therefore, these defects / damages need to be reported to us without delay after appearance and within the warranty period of 24 months after delivery to the end user. The warranty does not cover parts, which easily break (e.g. glass or plastic). The warranty does not cover slight deviations of the product, which are insignificant for usability and value of the device and damage caused by chemical or electrochemical effects and damages caused by penetration of water or generally force majeure damage.
- The warranty achievement is the replacement or repair of defective parts, depending on our decision. The cost of material and labor will be borne by us. Repairs at customer site cannot be demanded. The proof of purchase along with the date of purchase and / or delivery is required. Replaced parts become our property.
- The warranty is void if repairs or adjustments are made, which are not authorized by us or if our devices are equipped with additional parts or accessories that are not adapted to our devices. Furthermore, the warranty is void if the device is damaged or destroyed by force majeure or due to environmental influences and in case of improper handling / maintenance (e.g. due to non-observance of the instruction manual) or mechanical damages. The customer service may authorize you to replace or repair defective parts after telephone consultation. In this case, the warranty is not void.
- Warranty services do not extend the warranty period nor do they initiate a new warranty period.
- Further demands, especially claims for damages which occurred outside the device, are excluded as long as a liability is not obligatory legal.
- Our warranty terms - which cover the requirements and scope of our warranty conditions - do not affect the contractual warranty obligations of the seller.
- Parts of wear and tear are not included in the warranty.
- The warranty is void if not used properly.
In accordance with our policy of continual product improvement, we reserve the right to make technical and visual changes without notice.
For spare parts please contact: service@skandika.de Service centre: MAX Trader GmbH, Wilhelm-Beckmann-Straße 19, 45307 Essen, Germany
Contenu
11 Avis de sécurité