307021 - Alarm clock radio Bearware - Free user manual and instructions

USER MANUAL 307021 Bearware

ENG: Current drivers, user manuals and other relevant documents for this product can be found on our homepage.

Thank you for choosing a BEARWARE product. Please read the following user manual carefully so that you can enjoy the purchased product for a long time.

1. Scope of delivery

• Alarm clock
• User manual

2. Technical data

Power supply 1x 1.5 V AA battery
Dimensions (HxWxD) 125 x 85 x 50 mm
Characteristics	• Seconds indication • Illumination

3. Additional information about this alarm clock

Before using, make sure that the device is not damaged. If this is the case, then do not use it. The alarm clock should not be exposed to moisture or direct sunlight. The product is intended only for private use and not for medical purposes or for public information.

Caution!

Keep the batteries and the device out of the reach of children. Batteries contain harmful acids. Weak batteries should be replaced as soon as possible to prevent leakage! Never use new and old batteries or batteries of different types together. Never throw batteries into a fire and do not short-circuit them. Do not recharge the batteries and please do not take them apart. There is a risk of explosion!

4. Product details

5. Initial use

Take the product out of the package and remove all the packaging material. Open the battery compartment at the back of the device and insert one 1.5 V AA battery. Pay attention to the correct polarity of the contacts.

6. Setting the time

To set the time, turn the "Time setting" dial on the back of the device until the desired time is displayed in the alarm clock.

7. Alarm setting

7.1 Setting the alarm

To set the alarm, turn the "Alarm time setting" dial on the back of the device until the desired alarm time is displayed in the alarm clock. The alarm pointer on the front indicates the currently set alarm.

7.2 Enabling/disabling the alarm

To enable or disable the alarm, move the "Alarm ON / OFF" switch to ON (switched on) or OFF (switched off) position.

8. Light

Press and hold the "Backlight" button to switch on the backlight.

9. Safety instructions and disclaimer

Never try to open the device to repair or make modifications. Avoid contact with the mains voltage. Do not short-circuit the product. The device is not waterproof, hence please use it only in dry surroundings. Protect it from high humidity, water and snow. Keep the device away from high temperatures. Do not expose the device to sudden changes in temperature or strong vibrations, as this could damage the electronic components. Check the device for any damage before using it. The device should not be used if it was subject to impact or has been damaged in some other manner. Please comply with the local regulations and restrictions.

Do not use the device for purposes other than those described in the user manual. This product is not a toy. Keep it out of the reach of children or mentally disabled persons. Any repair or modification to the device, which is not carried out by the original supplier, will void any warranty and guarantee claims. The device should only be used by those who have read and understood this user manual. The specifications of the device may be changed without any special prior notification.

10. Disposal instructions

In line with the European WEEE directive, electrical and electronic devices should not be disposed of along with domestic waste. Their components must be sent for recycling or disposal separately, as improper disposal of toxic and dangerous components could permanently damage the environment. According to the electrical and electronic equipment act (ElektroG), you are obliged (as a consumer) to return (free of charge) electrical and electronic devices to the manufacturer, the point of sale or public collection points at the end of their service life. The relevant local laws regulate the details in this regard. The symbol displayed on the product, in the user manual or/and on the packaging refers to these regulations.

With this manner of sorting, recycling and disposal of used devices, you make an important contribution towards protecting our environment.

11. Instructions for battery disposal

In conjunction with the sale of batteries along with the supply of devices that include batteries, the supplier is obliged to point out the following to the customer: The customer is legally obliged to return used batteries. He can return used batteries which the supplier offers or has offered as new batteries in his assortment free of charge to the supplier's dispatch warehouse (shipping address). The symbols shown on the batteries indicate the following: Pb = battery contains more than 0.004 percent lead by weight, Cd = battery contains more than 0.002 percent cadmium by weight, Hg = battery contains more than 0.0005 percent mercury by weight.

The symbol of the crossed-out dustbin means that the battery should not be disposed of in household waste.

C E

WEEE directive 2012/19/EU
WEEE Register no.: DE 67896761

WD Plus GmbH hereby certifies that the devices 307021 and 307022 comply with the fundamental requirements and all other relevant stipulations. A complete conformity statement can be obtained from: WD Plus GmbH, Wohlenbergstraße 16, 30179 Hannover

(FR) +49511/13221730

(IT) +49511/13221740

(ES) +49511/13221750

MO-FR 9:30am - 18pm CET

downloads.ganziinfach.de

WD Plus GmbH