VX 12.2Q - Speaker TANNOY - Free user manual and instructions
Find the device manual for free VX 12.2Q TANNOY in PDF.
User questions about VX 12.2Q TANNOY
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Speaker in PDF format for free! Find your manual VX 12.2Q - TANNOY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VX 12.2Q by TANNOY.
USER MANUAL VX 12.2Q TANNOY
natural_image
Black cylindrical industrial tanks arranged in a cluster (no visible text or symbols)EN
ES
FR
DE
PT
IT
NL
SE
PL
VX Series
VX 15Q (-WH)/VX 15HP (-WH)/VX 12.2Q (-WH)/VX 12Q (-WH)/VX 12HP (-WH)
15/12" Power Dual Full Range Loudspeaker with Q-Centric Waveguide/Low Frequency Driver for Portable and Installation Applications
VX 12 (-WH)/VX 8M/VX 8.2 (-WH)/VX 8 (-WH)/VX 6 (-WH)/VX 5.2 (-WH)
12/8/6/5" Dual Concentric Full Range Loudspeaker with Low Frequency Driver for Portable and Installation Applications
2 VX Series Quick Start Guide 3
EN
ES
EN Important Safety Instructions
Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. the only high quality professional speaker tables with 15" TS or twist-locking plugs pre installed. All other installation or modification should be performed only by qualified personnel.
This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.
Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts include. Refer servicing to qualified personnel.
Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as wares, shall be plated on the apparatus.
Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.
- Read these instructions.
- Keep these instructions.
- Hold all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not hold any ventilation openings, install in accordance with the manufacturer's instructions.
-
Do not install near any heat sources such as rotators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
-
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding proong. The wide blade or the third proong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsovere outlet.
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they eat from the apparatus.
-
Use only attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
-
Unplug this apparatus during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug in damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-
The apparatus shall be connected to a AWNS socket outlet with a protective earthing connection.
-
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain nearly operable.
- Correct disposal of this product: This symbol indicates that this product must not be disposed at with household waste, according to the WEE Directive (2012/19/EU) and
should be taken to a collection center formed for the recycling of waste electrical and electronic equipment (EEL). The misunderstanding of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEL, at the same time, your corporation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service. 18. Do not install in a confined space, such as a book case or similar unit.
-
Do not place naked flame sources, such as lighted candles, on the apparatus.
-
Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.
-
This apparatus may be used in tropical and moderate climates up to 45°C.
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suffered by any person who relies on either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Mark Teknik, Lab Sugopera, Luke, Tammy, Turbosound, TC Electronic, TC Hamilton, Behringer, Sugera, Oberheim, Murstone, Aston Microphones and Codestudio are trademarks or registers trademarks of Music In the Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at musictribe.com/warranty.
ES
BESCHRÄNKTE GARANTIE
Thank you for choosing a Tanney loudspeaker product for your application. If you would like further information about this or any other Tanney product, please visit our website at tanmoy.com.
Unpacking the Loudspeaker
Each Tannoy VX Series loudspeaker is carefully tested and inspected prior to shipment. After unpacking, please inspect for any exterior physical damage, and save the carton and any relevant packaging materials in case the loudspeaker again requires packing and shipping. In the event that damage has been sustained in transit notify your dealer and the shipping carrier immediately.
System Requirements – Passive and Bi-amped Loudspeakers
Within the VX Series, system designers can choose from a variety of sizes, power levels and coverage patterns to suit particular requirements. For extended base performance, models with the "2" designation augment the Dual Concentric LT driver with a second matched LT driver. The "HP" designation indicates extended power handling capabilities, while the "Q" suffix indicates incorporation on the new Q-Centric Waveguide M (QCW™) for applications requiring an asymmetrical coverage pattern. The QCW horn can be rotated in a motor of minibus, allowing placement of the 73 x 40 degree pattern with either horizontal or vertical orientation. VX "HP" and "Q" versions have switchable inputs to allow operation in passive or bi-amp modes.
All other VX versions are full range speakers operating as a passive system and require only one amplifier channel.
To avoid wasting amplifier power, you should use heavy-duty speaker cable, with a minimum wire size of 1.5 mm² (16 AWG), and preferably 2.5 mm² (14 AWG) for longer runs. Use larger wire sizes for speakers wired in parallel. For extreme cable lengths, be aware of cable impedance and resistive losses, always observe the correct polarity.
WALI
- In the case of the first time, the time is 12 and the time is 12 .
Amplifier Considerations
The VS series loudspeaker are optimized for use with the Lab Gruppen PI V-1-series amplifiers or Lab LM series controllers used in combination with Lab Gruppen FP amplifiers. A full range of DSP settings to suit any configuration is provided for provided on the Tanny website. The use of third party amplification and processing is only advised using the matrix of manual settings as well as the limiter calculator provided on the Tanny website. VS series loudspeaker enclosures should be driven by high quality power amplifiers designed for true professional use. Power amplifiers should be capable of delivering long-term broadband power equal to half the loudspeaker's peak power rating at its stated nominal importance. The use of underpowered amplifiers must be avoided as heavily clipped signals can cause permanent loudspeaker damage. Limiters, crossovers and equalization points must be set in accordance with the settings provided on the Tanny website. This will ensure the optimum sound quality and long-term reliability as well as protection from damage.
Neutrik speakOH NLA locking input connector(s) are provided, allowing options for input and link, passive, and bi-amp operation.
Recommended Amplifier Power
| Model | V1.5.2 | V1.6 | V1.8 | V1.8.2 | V1.8.8 | V1.12 | VX 13BP/VX 120 | VX 12.20 | VX 15HP/VX 150 | |||||||
| Mode | Passive | Passive | Passive | Passive | Passive | Passive | Passive | B-amp F | B-amp F | Passive | B-amp F | B-amp F | Passive | B-amp F | B-amp F | |
| Impedance | 8.0 | 3.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | |
| Minimum amplifier | Continuous RMS | 130.02 | 130.02 | 142.01 | 202.01 | 130.02 | 220.02 | 152.01 | 152.02 | 82.01 | 202.01 | 152.02 | 570.01 | 420.01 | 402.01 | 82.01 |
| Power | Peak | 520.02 | 400.02 | 522.01 | 200.01 | 520.02 | 420.02 | 1420.02 | 1420.02 | 820.01 | 2020.02 | 1420.02 | 540.01 | 1620.02 | 1600.01 | 800.01 |
Connections
VX5.2, VX6, VX8, VX8.2
| Model | Back Panel | Connector | Internal Schematic |
| Passive | TANNOY | scram/OPF NLR | |
| Input Full Range: | |||
| Input Full Range: | |||
| Barrier Supply | |||
| Input Full Range: | Link Full Range: | ||
| Input Full Range: | Link Full Range: | ||
VX8M
| Model | Back Panel | Connector | Internal Schematic |
| Passive |
VX 12
| Model | Back Panel | Connector | Internal Schematic |
| Passive |  | speak/CH * NLDInput/Red Range - Input/Red Range - | NLDInput/1Line- |
 | Base/StepInput/Red Range - Input/Red Range - | NLDInput/2Line- | |
| Input/Red Range - Input/Red Range - | Base/StepInput/1Line- |
 |  |
 |  |
VX 12HP, VX 12Q, VX 12.2Q, VX 15HP, VX 15Q
| Model | Back Panel | Connector | Internal Schematic | ||
| Passive |  | Input/CH1* *MLAInput/Full Response +Input/Full Change +Input/Step Input/Full Response +Input/Full Change + | MLA1 - 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 - 31 - 32 - 33 - 34 - 35 - 36 - 37 - 38 - 39 - 40 - 41 - 42 - 43 - 44 - 45 - 46 - 47 - 48 - 49 - 50 - 51 - 52 - 53 - 54 - 55 - 56 - 57 - 58 - 59 - 60 - 61 - 62 - 63 - 64 - 65 - 66 - 67 - 68 - 69 - 70 - 71 - 72 - 73 - 74 - 75 - 76 - 77 - 78 - 79 - 80 - 81 - 82 - 83 - 84 - 85 - 86 - 87 - 88 - 89 - 90 - 91 - 92 - 93 - 94 - 95 - 96 - 97 - 98 - 99 - 100 - 101 - 102 - 103 - 104 - 105 - 106 - 107 - 108 - 109 - 110 - 111 - 112 - 113 - 114 - 115 - 116 - 117 - 118 - 119 - 120 - 121 - 122 - 123 - 124 - 125 - 126 - 127 - 128 - 129 - 130 - 131 - 132 - 133 - 134 - 135 - 136 - 137 - 138 - 139 - 140 - 141 - 142 - 143 - 144 - 145 - 146 - 147 - 148 - 149 - 150 - 151 - 152 - 153 - 154 - 155 - 156 - 157 - 158 - 159 - 160 - 161 - 162 - 163 - 164 - 165 - 166 - 167 - 168 - 169 - 170 - 171 - 172 - 173 - 174 - 175 - 176 - 177 - 178 - 179 - 180 - 181 - 182 - 183 - 184 - 185 - 186 - 187 - 188 - 189 - 190 - 191 - 192 - 193 - 194 - 195 - 196 - 197 - 198 - 199 - 200 - 201 - 202 - 203 - 204 - 205 - 206 - 207 - 208 - 209 - 210 - 211 - 212 - 213 - 214 - 215 - 216 - 217 - 218 - 219 - 220 - 221 - 222 - 223 - 224 - 225 - 226 - 227 - 228 - 229 - 230 - 231 - 232 - 233 - 234 - 235 - 236 - 237 - 238 - 239 - 240 - 241 - 242 - 243 - 244 - 245 - 246 - 247 - 248 - 249 - 250 - 251 - 252 - 253 - 254 - 255 - 256 - 257 - 258 - 259 - 260 - 261 - 262 - 263 - 264 - 265 - 266 - 267 - 268 - 269 - 270 - 271 - 272 - 273 - 274 - 275 - 276 - 277 - 278 - 279 - 280 - 281 - 282 - 283 - 284 - 285 - 286 - 287 - 288 - 289 - 290 - 291 - 292 - 293 - 294 - 295 - 296 - 297 - 298 - 299 - 300 - 301 - 302 - 303 - 304 - 305 - 306 - 307 - 308 - 309 - 310 - 311 - 312 - 313 - 314 - 315 - 316 - 317 - 318 - 319 - 320 - 321 - 322 - 323 - 324 - 325 - 326 - 327 - 328 - 329 - 330 - 331 - 332 - 333 - 334 - 335 - 336 - 337 - 338 - 339 - 340 - 341 - 342 - 343 - 344 - 345 - 346 - 347 - 348 - 349 - 350 - 351 - 352 - 353 - 354 - 355 - 356 - 357 - 358 - 359 - 360 - 361 - 362 - 363 - 364 - 365 - 366 - 367 - 368 - 369 - 370 - 371 - 372 - 373 - 374 - 375 - 376 - 377 - 378 - 379 - 380 - 381 - 382 - 383 - 384 - 385 - 386 - 387 - 388 - 389 - 390 - 391 - 392 - 393 - 394 - 395 - 396 - 397 - 398 - 399 - 400 - 401 - 402 - 403 - 404 - 405 - 406 - 407 - 408 - 409 - 410 - 411 - 412 - 413 - 414 - 415 - 416 - 417 - 418 - 419 - 420 - 421 - 422 - 423 - 424 - 425 - 426 - 427 - 428 - 429 - 430 - 431 - 432 - 433 - 434 - 435 - 436 - 437 - 438 - 439 - 440 - 441 - 442 - 443 - 444 - 445 - 446 - 447 - 448 - 449 - 450 - 451 - 452 - 453 - 454 - 455 - 456 - 457 - 458 - 459 - 460 - 461 - 462 - 463 - 464 - 465 - 466 - 467 - 468 - 469 - 470 - 471 - 472 - 473 - 474 - 475 - 476 - 477 - 478 - 479 - 480 - 481 - 482 - 483 - 484 - 485 - 486 - 487 - 488 - 489 - 490 - 491 - 492 - 493 - 494 - 495 - 496 - 497 - 498 - 499 - 500 - 501 - 502 - 503 - 504 - 505 - 506 - 507 - 508 - 509 - 510 - 511 - 512 - 513 - 514 - 515 - 516 - 517 - 518 - 519 - 520 - 521 - 522 - 523 - 524 - 525 - 526 - 527 - 528 - 529 - 530 - 531 - 532 - 533 - 534 - 535 - 536 - 537 - 538 - 539 - 540 - 541 - 542 - 543 - 544 - 545 - 546 - 547 - 548 - 549 - 550 - 551 - 552 - 553 - 554 - 555 - 556 - 557 - 558 - 559 - 560 - 561 - 562 - 563 - 564 - 565 - 566 - 567 - 568 - 569 - 570 - 571 - 572 - 573 - 574 - 575 - 576 - 577 - 578 - 579 - 580 - 581 - 582 - 583 - 584 - 585 - 586 - 587 - 588 - 589 - 590 - 591 - 592 - 593 - 594 - 595 - 596 - 597 - 598 - 599 - 600 - 601 - 602 - 603 - 604 - 605 - 606 - 607 - 608 - 609 - 610 - 611 - 612 - 613 - 614 - 615 - 616 - 617 - 618 - 619 - 620 - 621 - 622 - 623 - 624 - 625 - 626 - 627 - 628 - 629 - 630 - 631 - 632 - 633 - 634 - 635 - 636 - 637 - 638 - 639 - 640 - 641 - 642 - 643 - 644 - 645 - 646 - 647 - 648 - 649 - 650 - 651 - 652 - 653 - 654 - 655 - 656 - 657 - 658 - 659 - 660 - 661 - 662 - 663 - 664 - 665 - 666 - 667 - 668 - 669 - 670 - 671 - 672 - 673 - 674 - 675 - 676 - 677 - 678 - 679 - 680 - 681 - 682 - 683 - 684 - 685 - 686 - 687 - 688 - 689 - 690 - 691 - 692 - 693 - 694 - 695 - 696 - 697 - 698 - 699 - 700 - 701 - 702 - 703 - 704 - 705 - 706 - 707 - 708 - 709 - 710 - 711 - 712 - 713 - 714 - 715 - 716 - 717 - 718 - 719 - 720 - 721 - 722 - 723 - 724 - 725 - 726 - 727 - 728 - 729 - 730 - 731 - 732 - 733 - 734 - 735 - 736 - 737 - 738 - 739 - 740 - 741 - 742 - 743 - 744 - 745 - 746 - 747 - 748 - 749 - 750 - 751 - 752 - 753 - 754 - 755 - 756 - 757 - 758 - 759 - 760 - 761 - 762 - 763 - 764 - 765 - 766 - 767 - 768 - 769 - 770 - 771 - 772 - 773 - 774 - 775 - 776 - 777 - 778 - 779 - 780 - 781 - 782 - 783 - 784 - 785 - 786 - 787 - 788 - 789 - 790 - 791 - 792 - 793 - 794 - 795 - 796 - 797 - 798 - 799 - 800 - 801 - 802 - 803 - 804 - 805 - 806 - 807 - 808 - 809 - 810 - 811 - 812 - 813 - 814 - 815 - 816 - 817 - 818 - 819 - 820 - 821 - 822 - 823 - 824 - 825 - 826 - 827 - 828 - 829 - 830 - 831 - 832 - 833 - 834 - 835 - 836 - 837 - 838 - 839 - 840 - 841 - 842 - 843 - 844 - 845 - 846 - 847 - 848 - 849 - 850 - 851 - 852 - 853 - 854 - 855 - 856 - 857 - 858 - 859 - 860 - 861 - 862 - 863 - 864 - 865 - 866 - 867 - 868 - 869 - 870 - 871 - 872 - 873 - 874 - 875 - 876 - 877 - 878 - 879 - 880 - 881 - 882 - 883 - 884 - 885 - 886 - 887 - 888 - 889 - 890 - 891 - 892 - 893 - 894 - 895 - 896 - 897 - 898 - 899 - 900 - 901 - 902 - 903 - 904 - 905 - 906 - 907 - 908 - 909 - 910 - 911 - 912 - 913 - 914 - 915 - 916 - 917 - 918 - 919 - 920 - 921 - 922 - 923 - 924 - 925 - 926 - 927 - 928 - 929 - 930 - 931 - 932 - 933 - 934 - 935 - 936 - 937 - 938 - 939 - 940 - 941 - 942 - 943 - 944 - 945 - 946 - 947 - 948 - 949 - 950 - 951 - 952 - 953 - 954 - 955 - 956 - 957 - 958 - 959 - 960 - 961 - 962 - 963 - 964 - 965 - 966 - 967 - 968 - 969 - 970 - 971 - 972 - 973 - 974 - 975 - 976 - 977 - 978 - 979 - 980 - 981 - 982 - 983 - 984 - 985 - 986 - 987 - 988 - 989 - 990 - 991 - 992 - 993 - 994 - 995 - 996 - 997 - 998 - 999 - 1000 |
Mounting and Fixing
Arraying
Small alterations to loudspeaker positions can have the effect of minimising problematic combing frequencies. Arrays should be constructed so that the individual coverage patterns of each loudspeaker combine with minimal overlap. The design of the VXP cabinet greatly simplifies the creation of effective arrays, allowing seamless wide horizontal coverage using two loudspeakers without the need for testious experimentation.
By placing the VXP cabinets with the 30 degree angled rear panels together, minimal dispersion pattern overlap is achieved, guaranteeing an extraordinaryly smooth transition. In many applications the 90 or 75 degree dispersion pattern may be sufficient in the horizontal plane. It is also possible to stack the cabinets vertically using the above method (in a central cluster for example) where greater vertical dispersion is required. As shown in the above diagram, one of the VXP cabinets is inverted to allow the optimum play angle to be achieved. The grille can be simply removed from this cabinet and be replaced for matching orientation. The grille is held in position by the two fixing screws on the top and bottom lips of the cabinet.
natural_image
Technical line drawing of two cylindrical industrial enclosures with mounting holes and side-mounted fans (no text or symbols)The Tammy Professional hardware covered in this guide has been designed to offer quick, simple, cost effective and secure solutions for mounting specific Tammy Professional loudspeakers. This hardware has been designed and manufactured with a high safety load factor for its specific role. To ensure the safest possible use of the hardware covered in this guide, it must be assembled in strict accordance with the instructions specified. The information in this Quick Start Guide relating to the assembly and the safe use of these accessories must be understood and followed.
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualified personnel with the required experience and certification to perform the necessary tasks. Walls, floors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory used must be safely and securely fixed both in the loudspeaker and to the wall, floor or ceiling.
When mounting rigging components on walls, floors or ceilings, ensure that all finishes and fasteners used are of an appropriate size and load rating. Wall and ceiling cladding, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fixing arrangement can be safely employed for a particular load. Cavity plugs or other specialist finishes, if required, must be of an appropriate type, and must be fitted and used in accordance with the maker's instructions.
The operation of your speaker cabinet as part of a flown system, if installed incorrectly and improperly, can potentially expose persons to serious health risks and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualified and certified (by local state or national authorities) personnel prior to any installation or flying.
Make sure that speaker cabinets are set up and flown by qualified and certified personnel only, using dedicated equipment and original parts and components delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. MUSIC Tribe, including the MUSIC Tribe companies listed on the enclosed "Service Information Sheet", assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product. Regular checks must be conducted by qualified personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker is flown, the area underneath the speaker is free of human traffic. Do not fly the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic field, even if not in operation. Therefore, please keep all materials that can be affected by such fields (discs. computers, monitors, etc.) at a safe distance. A safe distance is usually between 1 and 2 metres.
In favor of the 1980s, we have seen that the 1980s were a major event in the 1980s. In favor of the 1980s, we had seen that the 1980s were a major event in the 1980s.
In our view of the 2016 and 2017, we have been a new version of the 2016 and 2017. We have been a new version of the 2016 and 2017. We have been a new version of the 2016 and 2017. We have been a new version of the 2016 and 2017. We have been a new version of the 2016 and 2017. We have been a new version of the 2016 and 2017.
For the change in the problem and the value of the cost of a product per compound is given, we assume that our products are not to be used. For example, we believe that our products are not to be used. For example, we believe that our products are not to be used.
| Modelo | VX 5.2 | VX 6 | VX 8 | VX 8.1 | VX 8M | VX 12 | VX 12HP / VX 12Q | VX 12.2Q | VX 15HP / VX 15Q | ||||||
| Modo | Pantana | Pantana | Pantana | Pantana | Pantana | Pantana | Hampelcado LF | Hampelcado LF | Pantana | Hampelcado LF | Hampelcado MLF | Pantana | Hampelcado MLF | ||
| Impedência | B,C | B,C | B,C | B,C | B,C | B,C | B,C | B,C | B,C | B,C | B,C | B,C | B,C | B,C | B,C |
| Potência mínima de amplifier | RMS controla | 100 W | 100 W | 150 W | 200 W | 100 W | 200 W | 350 W | 350 W | 100 W | 500 W | 500 W | 500 W | 400 W | 80 W |
| Pico | 500 W | 400 W | 500 W | 800 W | 500 W | 800 W | 1400 W | 1400 W | 800 W | 2000 W | 1400 W | 1400 W | 1600 W | 300 W | |
Montagem e fixação
Arraying
Changshan for the 10-year period, a total of 45 years of annual income from post-annual change. The gross profit margin and average earnings per share are shown as follows: (1) the gross profit margin is 2.8% from the prior year; (2) the average earnings per share are 3.6%. (3) the average earnings per share are 3.7%. (4) the average earnings per share are 3.9%. (5) the average earnings per share are 4.0%. (6) the average earnings per share are 4.1%. (7) the average earnings per share are 4.2%. (8) the average earnings per share are 4.3%. (9) the average earnings per share are 4.4%. (10) the average earnings per share are 4.5%. (11) the average earnings per share are 4.6%. (12) the average earnings per share are 4.7%. (13) the average earnings per share are 4.8%. (14) the average earnings per share are 4.9%. (15) the average earnings per share are 5.0%. (16) the average earnings per share are 5.1%. (17) the average earnings per share are 5.2%. (18) the average earnings per share are 5.3%. (19) the average earnings per share are 5.4%. (20) the average earnings per share are 5.5%. (21) the average earnings per share are 5.6%. (22) the average earnings per share are 5.7%. (23) the average earnings per share are 5.8%. (24) the average earnings per share are 5.9%. (25) the average earnings per share are 6.0%. (26) the average earnings per share are 6.1%. (27) the average earnings per share are 6.2%. (28) the average earnings per share are 6.3%. (29) the average earnings per share are 6.4%. (30) the average earnings per share are 6.5%. (31) the average earnings per share are 6.6%. (32) the average earnings per share are 6.7%. (33) the average earnings per share are 6.8%. (34) the average earnings per share are 6.9%. (35) the average earnings per share are 7.0%. (36) the average earnings per share are 7.1%. (37) the average earnings per share are 7.2%. (38) the average earnings per share are 7.3%. (39) the average earnings per share are 7.4%. (40) the average earnings per share are 7.5%. (41) the average earnings per share are 7.6%. (42) the average earnings per share are 7.7%. (43) the average earnings per share are 7.8%. (44) the average earnings per share are 7.9%. (45) the average earnings per share are 8.0%. (46) the average earnings per share are 8.1%. (47) the average earnings per share are 8.2%. (48) the average earnings per share are 8.3%. (49) the average earnings per share are 8.4%. (50) the average earnings per share are 8.5%. (51) the average earnings per share are 8.6%. (52) the average earnings per share are 8.7%. (53) the average earnings per share are 8.8%. (54) the average earnings per share are 8.9%. (55) the average earnings per share are 9.0%. (56) the average earnings per share are 9.1%. (57) the average earnings per share are 9.2%. (58) the average earnings per share are 9.3%. (59) the average earnings per share are 9.4%. (60) the average earnings per share are 9.5%. (61) the average earnings per share are 9.6%. (62) the average earnings per share are 9.7%. (63) the average earnings per share are 9.8%. (64) the average earnings per share are 9.9%. (65) the average earnings per share are 10.0%. (66) the average earnings per share are 10.1%. (67) the average earnings per share are 10.2%. (68) the average earnings per share are 10.3%. (69) the average earnings per share are 10.4%. (70) the average earnings per share are 10.5%. (71) the average earnings per share are 10.6%. (72) the average earnings per share are 10.7%. (73) the average earnings per share are 10.8%. (74) the average earnings per share are 10.9%. (75) the average earnings per share are 11.0%. (76) the average earnings per share are 11.1%. (77) the average earnings per share are 11.2%. (78) the average earnings per share are 11.3%. (79) the average earnings per share are 11.4%. (80) the average earnings per share are 11.5%. (81) the average earnings per share are 11.6%. (82) the average earnings per share are 11.7%. (83) the average earnings per share are 11.8%. (84) the average earnings per share are 11.9%. (85) the average earnings per share are 12.0%. (86) the average earnings per share are 12.1%. (87) the average earnings per share are 12.2%. (88) the average earnings per share are 12.3%. (89) the average earnings per share are 12.4%. (90) the average earnings per share are 12.5%. (91) the average earnings per share are 12.6%. (92) the average earnings per share are 12.7%. (93) the average earnings per share are 12.8%. (94) the average earnings per share are 12.9%. (95) the average earnings per share are 13.0%. (96) the average earnings per share are 13.1%. (97) the average earnings per share are 13.2%. (98) the average earnings per share are 13.3%. (99) the average earnings per share are 13.4%. (100) the average earnings per share are 13.5%.
- 2015, the company's major business segment is a major business segment in the U.S. and its subsidiaries, which are limited to the U.S., and is limited to the U.S. and its subsidiaries of the U.S. and its subsidiaries of the U.S. and its subsidiaries of the U.S.
| Model | VY 5.2 | VX 6 | VX 8 | VX 8.2 | VX 601 | VX 12 | VX 13BP / VX 120 | VX 12.20 | VX 15BP / VX 150 | ||||||
| Roemy | Roemy | Roemy | Roemy | Roemy | Roemy | Roemy | Ra amp IF | Ra amp IF | Roemy | Ra amp IF | Ra amp SIF | Roemy | Ra amp IF | Ra amp IF | |
| Impedancja | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 | 8,0 |
| Minimalna moszniwieracza | Couple RMS | 130 W | 130 W | 130 W | 230 W | 130 W | 205 W | 330 W | 330 W | 80 W | 500 W | 350 W | 350 W | 400 W | 400 W |
| Szycyt | 520 W | 420 W | 58 W | 800 W | 520 W | 302 W | 1400 W | 1400 W | 800 W | 2100 W | 1400 W | 1400 W | 1500 W | 1600 W | |
Montaż i mocowanie
Arraying
EN Technical Specifications
WX521-WH1VX6(-WH)VX8(-WH)VX3M
| System | ||||
| Frequency response | 81 Hz ~ 35 kHz ±1 dB55 Hz ~ 61 Hz ~ 10 dB | 92 Hz ~ 35 kHz ±1 dB80 Hz ~ 15 kHz ~ 10 dB | 85 Hz ~ 35 kHz ±1 dB62 Hz ~ 15 kHz ~ 10 dB | 85 Hz ~ 35 kHz ±1 dB62 Hz ~ 15 kHz ~ 10 dB |
| Nominal dispersion | 120 °C × 90 °C ± .60 point W/ nominal @ toll point W/ nominal @ toll point W/ nominal @ toll point W/ nominal @ toll point | |||
| Directivity factor (Ω) | 7.1/5.6/3.8/6 | |||
| Directivity Index (DBI) | 8.5/7.9/6.2 | |||
| Power handling (IEC)PassiveBI amp | 130 W/ continuous, 520 W/ peak | 120 W/ continuous, 422 W/ peak | 130 W/ continuous, 520 W/ peak | 130 W/ continuous, 520 W/ peak |
| Seriality | 92 dB / 1 W/ Ge Tm / 91 dB / 1 W | 91 dB / 1 W/ Ge Tm / 92 dB / 1 W/ Ge Tm | ||
| Maximum SPLPassiveBI amp | 111 dB/ continuous, 117 dB/ peak- | 111 dB/ continuous, 117 dB/ peak- | 111 dB/ continuous, 116 dB/ peak- | 111 dB/ continuous, 116 dB/ peak- |
| ImpedancePassiveBI-champ | 8.0- | 8.0- | 8.0- | 8.0- |
| Crossover Type | Passive with dynamic IIF protection | Passive with dynamic IIF protection | Passive with dynamic IIF protection | Passive with dynamic IIF protection |
| Components | 1 x 5" / 25 mm L/ driver1 x 5" / 125 mm L/ constant conductivityDual Concentric | 1 x 6" / 150 mm constant flow/alkyDual Concentric | 1 x 6" / 200 mm constant flow/alkyDual Concentric | 1 x 6" / 200 mm constant flow/alkyDual Concentric |
| Exlosure | ||||
| Connectors | 2x Monotek speed/MP / ML1x barber ring terminals | 2x Monotek speed/MP / ML1x barber ring terminals | 2x Monotek speed/MP / ML1x barber ring terminals | 2x Monotek speed/MP / ML1x barber ring terminals |
| WritingPassiveBI-Jamp | Pin 1 x 1/1 Input, Pin 2 x 1/2 link- | Pin 1 x 1/1 Input, Pin 2 x 1/2 link- | Pin 1 x 1/1 Input, Pin 2 x 1/2 link- | Pin 1 x 1/1 Input, Pin 2 x 1/2 link- |
| Dimensions H x W x O | 334 x 161 x 200mm(15.1 x 17.5 x 7.7) | 334 x 225 x 216mm(3.5 x 8.5 x 6.3) | 309 x 281 x 275 mm(15.3 x 11.1 x 10.9) | 309 x 281 x 316.7 mm(15.3 x 11.1 x 12.9) |
| Net weight | 4 kg / 10 lb | 5 kg / 10 lb bin | 6 kg / 10 lb bin | 8 kg / 10 lb bin |
| Construction | 12mm / 67 hp/wood, center and internally branche | 12 mm / 67 hp/wood, centered and internally branche | 15 mm / 67 hp/wood, centered and internally branche | 15 mm / 67 hp/wood, centered and internally branche |
| Finish | Semi-matt hard joint (before ejection) | Semi-matt black joint (before ejection) | Semi-matt black joint (before ejection) | Semi-matt black joint |
| Grille | Powder coated perforated steel | Powder coated perforated steel | Powder coated perforated steel | Powder coated perforated steel |
| Flying hardware | Mn x 2 pole bracket, insert(14mm alarm leg)Show re-portsConstant block with industry standard beavers | Mn x 2 pole bracket insert(24mm alarm leg)Show re-portsConstant block with industry standard beaversBlanking plate for optimal VTH pole mount | Mn x 2 pole bracket insert(mm alternated)Mn x 2 pole bracketsComposite with industry standard bracketsMn x 4 pinsBlanking plate for optimal VTH pole mount1 x 6 charging bars | Mn x 2 firing insertsOutput mounting1 x 6 charging cards handleIntegrical power mount for standard35 mm poles |
| Accessories | ||||
| Multi-angle Wall MountMulti Angle Wall Mount-WHYoke Horizontal VSS 2/2/4.6Yoke Horizontal VSS 2/4/6.6 - WHWHR Top Plate | Multi-angle Wall MountMulti Angle Wall Mount-WHYoke Horizontal VSS 2/2/4.6Yoke Horizontal VSS 2/4/6.6 - WHWHR Top Plate | Multi-angle Wall MountMulti Angle Wall Mount-WHYoke Horizontal VSSYPower Vertical VSSY/R4.7 Yowe Vertical VSSY/R4.2 - WHWVR Top Plate | ||
| VUL 2 (CWH) | VX 12 (LWH) | VX 18(PWH) | VX 120 (WH) | |
| System | ||||
| Frequency response | 60 Hz - 35 kHz ± 4 dB60 Hz - 35 kHz - 10 dB | 70 Hz - 25 kHz ± 10 dB55 Hz - 30 kHz - 10 dB | 85 Hz - 25 kHz ± 10 dB55 Hz - 30 kHz - 10 dB | 80 Hz - 25 kHz ± 10 dB60 Hz - 30 kHz - 10 dB |
| Nominal dispersion | 90° central & left-poor | 15° central & left-poor | 75° central & left-poor | 75° left & 40°/25° left-poor |
| Directivity factor (IQ) | 8.1-9.6 | 10.1 | 13 | 15 |
| Directivity index (IQ) | 9.2-9.8 | 10 | 11.1 | |
| Power handling (IEC) | ||||
| PassiveBi-amp | 200 m continuous, 200 m peak | 200 m continuous, 200 m peak | 150 m continuous, 1,400 m peakLF: 350 W continuous, 1,400 W peakHI: 80 W continuous, 120 W peak | 150 W continuous, 1,400 W peakLF: 350 W continuous, 1,400 W peakHI: 80 W continuous, 250 W peak |
| Sensitivity | 59 dB / 112 dB / 12 dB / 7 dB | 60 dB / 97 dB / 112 dB / 7 dB / 57 dB / 112 dB / 7 dB | 70 dB / 97 dB / 112 dB / 7 dB / 57 dB / 112 dB / 7 dB | 70 dB / 97 dB / 112 dB / 7 dB / 57 dB / 112 dB / 7 dB |
| Maximum SPL | ||||
| PassiveBi-amp | 126 dB continuous, 122 dB peak | 120 dB continuous, 126 dB peak | 123 dB continuous, 129 dB peakLF: 126 dB continuous, 130 dB peakHI: 125 dB continuous, 135 dB peak | 123 dB continuous, 129 dB peakLF: 124 dB continuous, 130 dB peakHI: 122 dB continuous, 135 dB peak |
| Impedance | ||||
| PassiveBi-amp | 9.0 | 8.0 | 8.08.08.0 | 8.08.08.0 |
| Consumer Type | Passive with dynamic HF protection | Passive with HF protection | Passive / 80 zorg switchable | Passive / 80 zorg switchable |
| Components | 1.6" 620mm / LF lower1.6" 200mm / constant, directly dual control | 1.6" 200mm / constant, directly dual control | 1.6" 200mm / constant, directly dual control | 1.6" 200mm / constant, directly dual control |
| Endurance | ||||
| Connectors | 2x linear speed/60" H/L 1x horizontal strip terminals | 2x linear speed/60" H/L 1x horizontal strip terminals | 2x linear speed/60" H/L 1x horizontal strip terminals | 2x horizontal speed/60" H/L 1x horizontal strip terminals |
| Writing | ||||
| PassiveBi-amp | Free 1-/- 1.1 input, Free 2-/- 2.2 line | Free 1-/- 1.1 input, Free 2-/- 2.2 line | Free 1-/- 1.1 input, Free 2-/- 2.2 lineFree 1-/- 1.1, Free 2-/- 2.2 line | Free 1-/- 1.1 input, Free 2-/- 2.2 lineFree 1-/- 1.1, Free 2-/- 2.2 line |
| Dimensions Hi x W x D | 290 x 280 x 270 mm(25.5 x 11.1 x 10.9) | 487 x 371 x 361 mm(18.2 x 14.6 x 14.2) | 487 x 371 x 361 mm(18.2 x 14.6 x 14.2) | 487 x 371 x 361 mm(18.2 x 14.6 x 14.2) |
| Net weight | 14-8 kg 152.6 kg | 14.5 kg 193.3 kg | 20 kg 144.0 kg bin | 20 kg 144.0 kg bin |
| Constellation | 15 mm (64) pixels, inverted and internally crossed | 15 mm (64) pixels / 18 mm (64) feet, plywood, vented and internally crossed | 15 mm (64) pixels / 18 mm (64) feet, plywood, vented and internally crossed | 15 mm (64) pixels / 18 mm (64) feet, plywood, vented and internally crossed |
| Finish | Send much better than inside optimal | Send much better than inside optimal | Send much better than inside optimal | Send much better than inside optimal |
| Grille | Forward oriented instrument closed | Forward oriented performed slot | Forward oriented performed slot | Forward oriented performed slot |
| Flying hardware | NLS 4 flying pins(Allo) by cycle button lines2x integerly carrying handleFlying plan for the next will perform | Allo being pins (optional or landscape recording)NLS 4 cycle button lines2x integerly carrying handlesBanking panel for the next will performComparable with interactive standard toolsNo 4 slots | NLS 4 flying pins (optional or landscape recording)NLS 4 cycle button lines2x integerly carrying buttonsBanking panel for the next will performComparable with interactive standard toolsNo 4 slots | NLS 4 flying pins (optional or landscape recording)NLS 4 cycle button lines2x integerly carrying buttonsBanking panel for the next will performComparable with interactive standard toolsNo 4 slots |
| Accessories | ||||
| Tube Horizontal VSS 2Tube Horizontal VSS 2.2 Tube Vertical VSS/264.2.2 Tube Vertical VSS/264.2.2.2 Tube VTT Top List | Tube Horizontal VSS 2Tube Horizontal VSS 2.2 Tube Vertical VSS/264.2.2 Tube Vertical VSS/264.2.2.2 Tube VTT Top List | Tube Horizontal VSS 2Tube Horizontal VSS 2.2 Tube Vertical VSS/264.2.2 Tube Vertical VSS/264.2.2.2 Tube VTT Top List | Tube Horizontal VSS 2 Tube Horizontal VSS 2 Tube Vertical VSS/264.2.2 Tube Vertical VSS/264.2.2 Tube VTT Top List | |
34 VX Series
Quick Star Guide 35
EN Technical Specifications
VX 12.20 | WH | VX 15HP | WH | VX 15Q (-WH)
| System | |||
| Frequency response | 70 Hz - 25 MHz ± dB50 Hz - 10 MHz - 0 dB | 70 Hz - 25 MHz ± dB50 Hz - 100 kHz - 0 dB | 70 Hz - 25 kHz ± dB50 Hz - 30 kHz - 10 dB |
| Nominal dispersion | 70 Hz ± dB × dB points, 750 nmol / sec, 1400 rpm, 1500 mV ± dB × 600 rpm | ||
| Directivity factor (Ω) | 13.37 Ω | ||
| Directivity Index (RBI) | 11.19 Ω 10.8 | ||
| Power handling (BCL) | |||
| Provice | 500 W continuous, 2,222 W peak | ||
| Bit-amp | 1E-350 W continuous, 1,400 W peak | ||
| 100 Hz - 350 W continuous, 1,400 W peak | |||
| Sensitivity | 15 dB (1 W ± 1 mW) 99 dB (1 W ± 1 mW) 15 dB (1 W ± 1 mW) | ||
| Maximum SPL | |||
| Passive | 126 dB continuous, 132 dB peak | ||
| Bit-amp | 1.125 dB continuous, 125 dB peak | ||
| 1.125 dB continuous, 132 dB peak | |||
| Impedance | |||
| Passive | 8.0 | 8.0 | 8.0 |
| Bit-amp | 8.0 | 8.0 | 8.0 |
| 8.0 | 8.0 | 8.0 | |
| Crossover Type | Power + 100 Amp potrutable Power + Bit-amp potrutable Power + 10 Amp potrutable | ||
| Components | 1×12" 380 mm constant density Power dual with 0-Certek voltage side | ||
| Exposure | |||
| Connectors | 2x Mount speed 00" N/A1x banders strip samples | 2x Reank speed 00" N/A1x banders strip samples | 2x Breaker speed 00" N/A1x banders strip samples |
| Writing | |||
| Passive | Pro 1=1,1-point, Pro 2=2,1 link | Pro 1=1,1-point, Pro 2=2,1 line | Pro 1=1,1-point, Pro 2=2,1 line |
| BI Jump | Pro 1=1,1.5, Pro 2=2,1.8 | Pro 1=1,1.5, Pro 2=2,1.8 | Pro 1=1,1.5, Pro 2=2,1.8 |
| Dimensions in x V x O | 361 x 371 x 361 mm162 x 146 x 142" | 591 x 651 x 421 mm223 x 128 x 186" | 591 x 651 x 421 mm223 x 128 x 186" |
| Net weight | 45 kg (Hg) x 2 bit 25 kg (kg) x 2 bit | 25 kg (kg) x 3 bit | |
| Construction | 15 mm [1", endurance / 18 mm] (x2") front, plywood, vented and internally braced | 18 mm [x4]", endurance / 18 mm] (x2") front, plywood, vented and internally braced | 18 mm (x4") endurance / 18 mm] (x2") front, plywood, vented and internally braced |
| Finish | Sent mark point pair in every option [s] sent from shot gate within every option [s] sent mark button within one dot | ||
| Gellic | Powder cooling performed steel | Powder cooling performed steel | Powder cooling performed steel |
| Flying aircraft | M10 x 6 flying stairs(pontalt or landscape mounting)M10 x 6 bike track stairs2 x intership camming handsBlanking plane for optimal VM pole movement | M10 x 6 flying stairs(pontalt or landscape mounting)M10 x 6 bike track stairs2 x intership camming stairsBlanking plane for optimal VM pole movementComparable rail industry standard tracksM10 x 6 lines | M10 x 6 flying stairs(pontalt or landscape mounting)M10 x 6 bike track stairs2 x intership camming stairsBlanking plane for optimal VM pole movementComparable rail industry standard tracksM10 x 6 lines |
| Accessories | |||
| Vake Vertical V415 X2.2Vake Vertical V415 X2.2 X2.2X4" Top fit | Vake Horizontal V415Vake Vertical V415X4" Top fit | Vake Horizontal V415Vake Vertical V415X4" Top fit | |
Other important information
Important information
- Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musctribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quietly and efficiently. Also, read the terms and conditions of our warranty, if applicable.
- Malfunction. Should your Music Tribe Author and Reseller not be located in your vicinity, you may contact the Music Tribe Authorized Fulfill for your country listed under "Support" at musicitibe.com. Should your country not be listed, please check if your problem can be dealt with by our "Online Support" which may also be found under "Support" at musicitibe.com. Alternatively, please submit an online warranty claim at musicitibe.com BEFORE returning the product.
- Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.
Hereby, Music Tribe declares that this product is in compliance with Directive
2011/65/EU and Amendment 2015/B63/EU, Directive 2012/19/EU, Regulation
519/2012 REACH SWHC and Directive 1907/2006/LC, and this passive product is not
applicable to EMC Directive 2014/30/EU, LV Directive 2014/35/EU.
Full-text of EU OcC is available at https://community.musictribe.com/
EU Representative. Music Tribe Brands DKA/S
Address: U Spang Olsens Gade 17, DK - 3200 Aarhus N, Denmark
EN
