TANNOY CMS 803 - Speaker

CMS 803 - Speaker TANNOY - Free user manual and instructions

Find the device manual for free CMS 803 TANNOY in PDF.

📄 68 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice TANNOY CMS 803 - page 7
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type In-ceiling speaker
Brand Tannoy
Model CMS 803
Category Loudspeaker
Speaker diameter 8 inches (203 mm)
Transducer type Coaxial
Power handling (RMS) 100 W
Power handling (peak) 200 W
Nominal impedance 16 ohms (low impedance version)
100 V line version Available with 60 W / 30 W / 15 W / 7.5 W transformer
Frequency response 70 Hz - 20 kHz
Maximum SPL 115 dB SPL (peak)
Coverage angle 90° (conical)
Dimensions (diameter x depth) 310 x 180 mm
Cutout required 280 mm
Net weight 3.2 kg
Chassis material Steel
Grille Included, metal
Power supply Passive (requires external amplifier)
Connectors Screw terminal (low impedance version) / Molex (100 V version)
Operating temperature 0°C to 45°C
Maintenance and cleaning Clean with a dry, non-abrasive cloth
Safety Do not open the device. Refer all servicing to qualified personnel.
Spare parts and repairability Grille, cone, transformer available from the manufacturer
Warranty Check the conditions on the Music Tribe website

Frequently Asked Questions - CMS 803 TANNOY

What is the diameter of the CMS 803 speaker?
The Tannoy CMS 803 is equipped with an 8-inch (203 mm) coaxial speaker.
What is the power handling of the CMS 803?
The RMS power handling is 100 W and peak power handling is 200 W.
How to install the CMS 803 in a ceiling?
Cut a hole of 280 mm diameter, insert the speaker and tighten the mounting tabs. Ensure the ceiling can support the weight of 3.2 kg.
What is the impedance of the CMS 803?
The nominal impedance is 16 ohms in low impedance version. A 100 V line version with multi-power transformer is also available.
Can the CMS 803 be used outdoors?
No, this model is designed for indoor use, under moderate climate conditions (maximum temperature 45°C).
What cables to use to connect the CMS 803?
Use high-quality professional speaker cables with appropriate connectors (screw terminal or Molex connector for the 100 V version).
How to clean the CMS 803?
Clean the speaker with a dry, non-abrasive cloth. Never use liquids or chemicals.
What to do in case of malfunction?
Disconnect the device and contact a qualified technician. Do not open the speaker yourself as it contains live parts.
Is the CMS 803 compatible with a 100 V amplifier?
Yes, there is a version with a 100 V line transformer. Select the desired power (60 W, 30 W, 15 W, 7.5 W) via the transformer taps.
Where to find spare parts for the CMS 803?
Spare parts (grille, cone, transformer) are available from Tannoy or its network of authorized dealers. Visit the Music Tribe website for more information.

User questions about CMS 803 TANNOY

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Speaker in PDF format for free! Find your manual CMS 803 - TANNOY and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CMS 803 by TANNOY.

USER MANUAL CMS 803 TANNOY

natural_image Close-up of two white ceramic speakers with visible inner and outer rings, no text or symbols present.

CMS 3.0 Series

CMS803DC BM/PI/Q / CMS803 PI BACKCAN

8" Full Range Ceiling Loudspeaker with Dual Concentric Driver

CMS603DC BM/PI / CMS603ICT BM/PI/LS / CMS603 PI BACKCAN

6" Full Range Ceiling Loudspeaker with Dual Concentric or ICT Driver

CMS503DC BM/PI/LP / CMS503ICT BM/PI/LP / CMS503 PI BACKCAN

5" Full Range Ceiling Loudspeaker with Dual Concentric or ICT Driver

CMS403DCE / CMS403ICTE

4" Full Range Ceiling Loudspeaker with Dual Concentric or ICT Driver and adjustable "eyeball" design

2 CMS 3.0 Series Quick Start Guide 3

EN

ES

EN Important Safety Instructions

TANNOY CMS 803 - CMS 3.0 Series - 1

Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. the only high quality professional speaker tables with 15" TS or twist, locking plugs pre installed. All other installation or modification should be performed only by qualified personnel.

This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure - voltage that may be sufficient to constitute a risk of shock.

This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

Caution To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts include. Refer servicing to qualified personnel.

Caution To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as wares, shall be plated on the apparatus.

Caution These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

  1. Read these instructions.
  2. Keep these instructions.
  3. Hold all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with dry cloth.
  7. Do not hold any ventilation openings, install in accordance with the manufacturer's instructions.
  8. Do not install near any heat sources such as rotators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one water than the other. A grounding-type plug has two blades and a third grounding plug. The wide blade or the third spring are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

  10. Protect the power cord from being walking on or pinched particularly at plugs, convenience receptacle, and the point where they exit from the apparatus.
  11. Use only attachments accessories specified by the manufacturer.

TANNOY CMS 803 - CMS 3.0 Series - 2

  1. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

  1. Unplug this apparatus during lightning storms or when unused for long periods of time.

  2. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug in damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

  3. The apparatus shall be connected to a MANG socket outlet with a protective earthing connection.

  4. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain nearly operable.

TANNOY CMS 803 - CMS 3.0 Series - 3

  1. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEE Directive (2012/19/LU) and your national law. This product should be taken to a collection center licensed for

the recycling of waste electrical and electronic equipment ILEL. The mislanding of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with ILEL at the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office, or your household waste collection service. 18. Do not install in a confined space, such as a book case or similar unit.

  1. Do not place naked flame sources, such as lighted candles, on the apparatus.

  2. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed-of at a battery collection point.

  3. This apparatus may be used in tropical and moderate climates up to 45°C.

Music Tribe accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Clark Teknik, Lab Suggers, Lake, Tammy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microraphes and Codaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2012 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe's Limited Warranty, please see complete details online at community.musct tribe.com/pages/support@warranty.

ES

BESCHRÄNKTE GARANTIE

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : TANNOY

Model : CMS 803

Category : Speaker