BLENDER MATT - Blender Create - Free user manual and instructions

Product Type	Blender
Brand	Create
Model	BLENDER MATT
Color	Matte Black
Power supply	220-240 V ~ 50/60 Hz
Power	600 W (estimated)
Bowl capacity	1.5 L (estimated)
Bowl material	Glass
Number of speeds	2 + pulse
Main functions	Mixing, pureeing, emulsifying, ice crushing
Control type	Rotary knob
Indicator light	Yes
Handle	Yes
Non-slip feet	Yes
Safety	Sharp blades, do not immerse motor, only works with bowl in place
Maximum ingredient temperature	60 °C
Maintenance	Pulse cleaning with water, wipe motor with damp cloth
Spare parts	Bowl, lid, cap, blade, fixing ring
Warranty	2 years (estimated legal)
Recommended use	Household use only

Frequently Asked Questions - BLENDER MATT Create

How to assemble the blender?

Place the blade ring on the blade edge, then screw the jug firmly into the ring. Make sure the switch is OFF, place the bowl on the motor base and push down until it locks. Add the ingredients, place the lid, and insert the cap by turning clockwise.

How to clean the blender?

Do not immerse the motor base. Wipe it with a damp cloth. For the bowl, fill it with water, place it on the motor, and use the pulse function several times. Empty, rinse, and dry thoroughly. Be careful with the sharp blades.

Can I blend hot ingredients?

No, do not place hot ingredients (over 60 °C) in the jug to avoid risk of burns or damage.

Are the blades sharp?

Yes, the blades are very sharp. Handle them with care when cleaning, emptying the bowl, and performing maintenance.

How to use the pulse function?

Turn the switch to Pulse position (or hold it) for a burst of instant power. Ideal for solid or sticky ingredients and for cleaning.

Can I wash the motor base with water?

No, never immerse the motor base in water or any other liquid. Clean it only with a damp cloth.

What to do if the blender does not start?

Make sure the bowl is properly locked onto the motor base. The appliance does not work without the bowl in place. Also check that the switch is OFF before plugging in, then turn it on.

How to make mayonnaise?

Use speed 2 for 1.5 to 2 minutes. Add oil gradually through the lid's drip holes without removing the cap.

Can I crush ice?

Yes, use the pulse function for about 20 seconds for 100 g of ice. Cut large pieces if necessary.

How to remove the bowl after use?

Always turn the switch OFF and unplug. Lift the bowl straight up; no need to twist it.

USER MANUAL BLENDER MATT Create

Line drawing of a kitchen blender with handle and side panel (no text or symbols)

Security instructions 6

Parts list 7

Before use 8

Jar assembly 8

Blending 8

Practical hints 8

Attaching the jar 8

Cleaning 9

PORTUGUÊS

Thank you for choosing our blender. Before using the appliance, and to ensure the best use, carefully read these instructions.

The safety precautions enclosed herein reduce the risk of death, injury and electrical shock when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and package. If applicable, pass these instructions on to the next owner of the appliance. Always follow basic safety precautions and accident prevention measures when using an electrical appliance. We assume no liability for customer failing to comply with these requirements.

SECURITY INSTRUCTIONS

When using any electrical appliance, basic safety precautions should always be observed.

• Read all use instructions thoroughly before using this product.
• Blades are very sharp, handle with care. Please pay attention when handling the sharp cutting blades during cleaning, emptying the bowl and user maintenance.
• When cleaning the appliance please use a dry cloth, do not use water to clean the motor base, it may cause a potential injury from misuse.
• Always switch off the product and disconnect from the supply if it is left unattended and before assembling, disassembling, cleaning or approaching parts that move while in use.
• Do not immerse the product or allow the supply cord and plug come into contact with water or other liquid.
• This appliance is designed for normal household use only.
• Keep this appliance out of the reach of children.
• Your voltage must correspond to the voltage printed on the type plate located on the bottom of the motor housing. When connecting to an outlet, the motor must always be turned off (switch at OFF position).
• This appliance will not work without the jug or mill accessory in place on the motor housing.
• Before switching on, make sure the jug is properly assembled and in place on the motor housing with the lid on.
• Do not use without any load in the jug (e.g. solid or liquid ingredients).

• Do not place hot ingredients (over 60^ ) in the jug.

• Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running.

• If the supply cord is damaged, it must be replaced by a special cord from the manufacturer or its service agent.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

PARTS LIST

1. Meter cap
2. Top

3. Jug

4. Blades

5. Main body

6. Indicator light

7. Paws

8. Grab handle
9. Power regulator

BEFORE USE

• Clean all parts before using your appliance for the first time.
• Uncoil amount of cord needed from cord storage at the bottom of the motor housing and connect to an outlet.

JAR ASSEMBLY

• Position the ring onto the rim of the blade.
  Caution: the blade is very sharp, handle with care.
• Carefully place the blade assembly into the retainer ring.
• Screw the jug securely into the retainer ring.

Line drawing of a blender with a handle and base, showing a drop in the middle (no text or symbols)

ATTACHING THE JAR

• Make sure that the switch is on the OFF position.
• Place the jar on the motor housing and push it down until it is securely locked into place.

Line drawing of a blender with handle and blade, showing blade blades and control knob (no text or symbols)

BLENDING

1. Put the food to be processed into the jar.
2. Place the lid firmly on the jar. Insert the stopper into the lid opening and turn it clockwise to lock.
3. Plug in, then turn the motor housing on.

- Speeds:

• 1 - Light applications with liquid ingredients.
• 2 - Thicker consistency, mixing both liquids and solid ingredients.
- Pulse - Instant power burst (hold the switch in pulse position or turn it to pulse position repeatedly).

1. After use, always turn the switch to the OFF position and unplug the motor housing.

2. To remove the jar, lift it straight up; there is no need to twist it.

PRACTICAL HINTS

- For best pureeing results when using solid ingredients, feed small portions into the jar gradually rather than adding a large quantity at one time.

- Cut up into small pieces (2-3 cm).

• Always start by mixing solid ingredients with a small amount of liquid. Then gradually add more liquid through the opening in the lid.

• Always operate the unit with your hand positioned on the top.
- Be careful with hot liquids.
- When preparing mayonnaise, oil may be added through the drip holes in the lid without removing the stopper.
- We recommend that you use the pulse mode when mixing solid or highly viscous ingredients to avoid the blade becoming stagnant.

APPLICATIONS	FOOD SPEED TIME PREPARATION
Blending All liquids, drinks. warm soups 1 40 - 60 sec
Pureeing	Vegetables, fruit, sauces, baby food	2 1.5 - 2 min 2 cm pieces
Mixing	Pancake batterYogurt based drinks and desserts	1-2	1 min1.5 - 2 min
Emulsifying Mayonnaise 2 1.5 - 2 min
Crushing	Ice (100g)	Pulse	20 sec

CLEANING

Do not immerse the motor housing in water. Wipe clean with a damp cloth only.

After emptying the jar, fill it with water. Place it on the motor housing and turn the switch to the "pulse/clean" setting several times.

Empty the jar and rinse clean.

Make sure the jar is empty before you unscrew the fastener ring. Exercise caution when handling the blade.

After washing up the parts, rinse them with clean water and dry them thoroughly.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in electric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws.

Line drawing of a blender with a handle and base, showing a drop in the middle (no text or symbols)

Line drawing of a blender with handle and blade, showing blade blades and a circular button (no text or symbols)

BATIR

Line drawing of a blender with a handle and base, showing a drop in the middle layer (no text or symbols)

ANEXANDO O FRASCO

Line drawing of a blender with handle and spout, showing blade structure and control knob (no text or symbols)

MISTURANDO

Line drawing of a blender with a handle and base, showing liquid level and plug (no text or symbols)

FIXATION DU POT

Line drawing of a blender with handle and control knob (no text or symbols)

MÉLANGE

Line drawing of a blender with a handle and base, showing a drop in the middle (no text or symbols)

ATTACCARE IL VASO

Line drawing of a blender with handle and spout, showing blade structure and control knob (no text or symbols)

MESCOLANZA

Line drawing of a blender with a handle and base, showing a drop in the middle (no text or symbols)

DAS GLAS ANBRINGEN

Line drawing of a blender with handle and control knob (no text or symbols)

MISCHEN

Line drawing of a blender with a handle and base, showing a drop in the middle (no text or symbols)

DE POT BEVESTIGEN

Line drawing of a blender with handle and blade, showing blade blades and control knob (no text or symbols)

MENGEN

Line drawing of a blender with a handle and base, showing a drop in the middle (no text or symbols)

MOCOWANIE SŁOIKA

Line drawing of a blender with handle and spout, showing blade and lid components (no text or symbols)

MIESZANIE