LABPS3010SM - Switch VELLEMAN - Free user manual and instructions

Product type	Switching laboratory power supply
Brand	Velleman
Model	LABPS3010SM
Output voltage	0-30 V adjustable
Output current	0-10 A adjustable
Maximum power	300 W
Display	Digital LED (voltage and current)
Input supply	Mains 230 V AC, 50/60 Hz
Dimensions (W x D x H)	240 x 150 x 300 mm
Weight	3 kg
Protection	Against overload, short-circuit and overtemperature
Display resolution	0.01 V / 0.01 A
Accuracy	±1% + 1 digit
Maintenance and cleaning	Unplug the device and clean with a soft, dry cloth
Safety	Use only with protective earth; do not expose to moisture
Spare parts and repairability	Replaceable fuses; repair by a qualified technician
Warranty	2 years (24 months) against manufacturing defects
Included accessories	Power cable, user manual

Frequently Asked Questions - LABPS3010SM VELLEMAN

What is the maximum output voltage of the LABPS3010SM?

The maximum voltage is 30 V continuous, adjustable from 0 to 30 V.

What is the maximum current delivered by this power supply?

The maximum current is 10 A, adjustable from 0 to 10 A.

How to adjust voltage and current?

Use the rotary knobs or the + and - buttons on the front panel to adjust voltage and current. The digital display shows the values in real time.

Does the power supply support short circuits?

Yes, it is protected against short circuits. In case of a short circuit, it limits current to the set value or enters protection mode.

Can I connect sensitive devices?

Yes, the output is stabilized with low ripple, making it suitable for most sensitive electronic devices. However, check the voltage compatibility.

How to maintain the device?

Unplug the power supply and clean the casing with a soft, dry cloth. Do not use solvents or water. Ensure ventilation openings are not obstructed.

What to do if the fuse blows?

Unplug the device, replace the fuse with an identical one (indicated on the rear panel). If the problem persists, contact after-sales service.

What is the display accuracy?

The accuracy is ±1% + 1 digit. For example, for a reading of 12.00 V, the actual voltage is between 11.87 V and 12.13 V.

Can I connect the power supply in series or parallel?

This model is not designed for series or parallel connection. For applications requiring higher voltages or currents, use an appropriate power supply.

Is the device guaranteed?

Yes, Velleman offers a warranty of 24 months against manufacturing defects. Keep the purchase receipt for any claim.

USER MANUAL LABPS3010SM VELLEMAN

EN DC LAB SWITCHING MODE POWER SUPPLY WITH LCD DISPLAY

NL DC LAB SCHAKELENDE VOEDING MET LCD SCHERM

FR ALIMENTATION À DÉCOUPAGE DC AVEC ECRAN LCD

Important anvironmental information about teis prożuńt

2. Saśaty Instruńtions

5.3 Lažing vârbinżan

6. Nattoyaga at antratian

• Débsaęcheś l’aąqaśeilżaęń chażże eęńśenieę oż ęeńnoyąę.
• Les câbles d'alimeçñar ioççè œzŽeçń qas ênsí eedommaçés. Coefieś l'eenšenieę è že nechęicieę zázalifié.
• Esszyeś ségżlièsemeęi l'aąqaśeil ćŻec że chiffoę hźmide ęoę ąelżcheźx. ÉŻiñeś l':sage d'alcool en de solŻaęns.
• Il ç'y a azczeç e qièce śéaásable aas l'źnilisañez sazf le fźsi ble. Commaçdeś des aièces deésechaège éŽeęńżelles chez Žońse śeŽeędeżs
• Snockeś l'ąąąąseil daęs że eędsoin sec, bieę Żeęnilé en sas ąożssièse.

7. Spénišínations tañenquas

ńęesioę d'ęeńské	230 V 50 Hz
Żolnage de sosni	0-30 A ajżsńąle max.
cożsaęń de sosnię	0-10 A ajżsńąle max.
ńęesioę d'oędźlańioę	=/< 100mVą -ą
dimeęsioęs	85 × 160 × 230 mm
ąoids	1.574 kq
fźsible	T5

N'employar nát apparāl qu'avan żas añássociras ż'origi ną. La SA Vallaman ną paut, żanis la mąsurą nonśormą au żroit applińabla êtrą tanuą rąsponsabla żas żommagas ou lésions (żirànts ou inżirànts) pouvant résultat ża l'utilisation ża nát apparāl.

Velleman® Service and Quality Warranty

Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).

General Warranty Conditions Concerning Consumer Products (for EU):

- All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.

- Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion.

You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

• Not covered by warranty:

- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity...), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;

- consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts... (unlimited list);

- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc....;

- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer's instructions;

- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);

- damage resulting from an inappropriate packing and shipping of the article; - all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.

- Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.

- Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.

• Repairs occurring after warranty expiration are subject to shipping costs.

- The above conditions are without prejudice to all commercial warranties. The above enumeration is subject to modification according to the article (see article's manual).

NL