Chrom 16 - Fan Sonnenkönig - Free user manual and instructions

Product Type	Pedestal Fan
Brand	Sonnenkönig
Model	Chrom 16
Power Supply	220-240 V, 50 Hz
Power Consumption	50 Watts
Number of Speeds	3 (Low, Medium, High)
Oscillation	Yes, 90°
Tilt	Adjustable (horizontal and tilted downward)
Adjustable Height	Yes, via locking system
Material	Metal and plastic
Base	Chrome
Protection	Thermal protection, safety grille
Assembly	Requires assembly (base, blades, grilles)
Cleaning	Unplug, disassemble grilles and blades, clean with a damp cloth
Warranty	24 months
Usage	Indoor use only
Child Safety	Use by children from 8 years of age under supervision

Frequently Asked Questions - Chrom 16 Sonnenkönig

How to assemble the base of the Chrom 16 fan?

Insert the rod into the base plate, place the weight on the small metal plate, then secure with the L-shaped screw.

How to adjust the fan height?

Open the locking system by turning counterclockwise, adjust to the desired height, then lock by turning clockwise.

How to use the oscillation function?

Press the oscillation button on the housing, pushing it firmly downward. To stop oscillation, pull the button upward until you hear a click.

How to clean the Chrom 16 fan?

Unplug the appliance, open the front grille fasteners, remove the grille, unscrew the blades, clean the parts with a damp cloth and dry with a dry cloth. Do not use abrasive products.

What safety precautions should be observed?

Do not immerse in water, do not insert objects into the housing, do not use with wet hands, check the cable regularly, and do not leave unattended while operating.

What to do if the fan does not turn on?

Check that the plug is connected and the voltage matches. Make sure the speed control is not set to 0. If the problem persists, contact a professional.

How to change the fan speed?

Turn the speed control: 0 = off, I = low, II = medium, III = high.

Can the fan be used outdoors?

No, this device is designed for indoor use only.

How to adjust the fan tilt?

Use the tilt adjustment lever to position the housing horizontally (position A) or tilted downward (position B).

What is the warranty of the Chrom 16 fan?

The warranty period is 24 months from the date of purchase. Please keep the proof of purchase.

USER MANUAL Chrom 16 Sonnenkönig

Modern office desk fan with radial blades and metallic stand (no text or symbols visible)

Technical diagram of a fan assembly with labeled parts and internal components

A. Grill Dekoration

B. Frontschutzbügel

C. Spange

D. Lüfterflügel

Pure mechanical diagram showing a shaft and pulley system without any text, numbers, or symbols

DE

Mechanical assembly diagram showing a valve mechanism with gears and a cylinder (no text or symbols)

Diagram of a multi-tiered fan assembly with a mounted device (no text or symbols present)

Simple line drawing of a balloon with a string and two hanging objects (no text or symbols)

Diagram of a fan with labeled parts (a, b) and a small mechanical device below (no text or symbols present)

Close-up of a metallic cylindrical container with a side panel and internal structure (no visible text or symbols)

DE

Technical line drawing of a two-blade fan assembly with a mounted device (no text or symbols)

Ulisbach, den 29. September 2017

Firma Armin Schmid

Armin Schmid

Festnetz 14 Cent/Minute

Modern office desk fan with radial blades and metallic stand (no text or symbols visible)

Article-nr. Chrom 16" 10510182

SOMMAIRE

Technical diagram of a fan assembly with labeled parts and internal components

FR

Pure mechanical diagram showing a shaft and pulley system without any text, numbers, or symbols

Mechanical assembly diagram showing a valve mechanism with gears and a cylinder (no text or labels)

Technical line drawing of a multi-blade fan assembly with a mounted device (no text or symbols)

FR

FR

Simple line drawing of a balloon with a string and two hanging objects (no text or symbols)

Diagram of a fan with internal blades and a small mechanical device (no text or symbols)

Close-up of a metallic cylindrical container with a side panel and control knob (no visible text or symbols)

Technical line drawing of a fan assembly with a mounted device (no text or symbols)

7 Informations techniques

Modifications techniques

Ulisbach, den 29. September 2017

Firma Armin Schmid

Armin Schmid

Festnetz 14 Cent/Minute

Modern office desk fan with radial blades and metallic stand (no text or symbols visible)

Nr. articolo Chrom 16" 10510182

IT

INDICE

A B C D E F G H I J K L M N O T U V X W P Q R S U. Vite

Pure mechanical diagram showing a shaft and pulley system without any text, numbers, or symbols

Mechanical assembly diagram showing a valve mechanism with gears and a cylinder (no text or symbols)

Technical line drawing of a multi-blade fan assembly with a mounted device (no text or symbols)

Simple line drawing of a balloon with a string and two hanging objects (no text or symbols)

Diagram of a fan with blades and a side-mounted device (no text or symbols)

Close-up of a metallic cylindrical container with a side panel and control knob (no visible text or symbols)

Technical line drawing of a fan with blades and a mounted device (no text or symbols)

7 Informationen tecniche

Ulisbach, den 29. September 2017

Firma Armin Schmid

Armin Schmid

Modern office desk fan with radial blades and metallic stand (no text or symbols visible)

1 Safety information....41
2 Description of the parts.... 43
3 Operating Instructions.... 44
4 Operation – Before using it for the first time.... 44
5 Operation – Ventilate 46
6 Cleaning and maintenance 47
7 Technical information.... 48
8 Warranty / Disposal / Technical change 48

1 Safety Information

Please read before first commissioning the safety instructions carefully and observe the safety instructions to prevent damage due to misuse, improper operation, and improper environmental conditions to be avoided. Keep these for later reference. Please make sure to place the device on a suitable and waterproof surfaces, so that spilled liquids can not cause harm.

Check the device after removing the packaging for damage. Do not put the unit in case of suspected corruption in operation and consult a specialist. The recyclable packaging material must not be stored or disposed accessible for young children, but must be disposed of properly.

This appliance is only for the purpose for which it was explicitly developed. Any other use is regarded as improper and therefore dangerous. The supplier is not liable for damage to persons and / or property damage due to an improper or incorrect use.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Please make sure to place the device on a suitable and waterproof surfaces, so that spilled liquids can not cause harm.

Repairs to electrical appliances must only be carried out by trained personnel only. Improperly performed repairs and alterations to the equipment can have dangerous consequences for the user according to what the warranty will be rejected.

• Incorrect operation and improper use can damage the appliance and cause injury to the user.
• The appliance may be used only for its intended purpose. No responsibility can be taken for any possible damage caused through incorrect use or improper handling.
• Before connecting the appliance to the power source, check that the current and power match those indicated on the rating label.
• Do not put the appliance or the plug in water or any other liquid. However, should the appliance accidentally fall into water, unplug the appliance immediately and have it checked by a qualified person before using it again. Non-observance could cause a fatal electric shock!
• Never attempt to open the housing yourself.

• Do not place any kind of object into the inside of the housing.

• Do not use the appliance with wet hands, on a damp floor or when the appliance itself is wet.

• Do not touch the plug with wet or damp hands.
• Check the cord and the plug regularly for any possible damage. If the cord or plug is damaged, it must be replaced by the manufacturer or a qualified person in order to avoid a hazard.
• Do not use the appliance if it is dropped or otherwise damaged or if the cord or plug are damaged.
• In the case of any damages, take the appliance to an authorised service centre for examination and repair if necessary.
• Never attempt to repair the appliance yourself. This could cause an electric shock.
• Do not allow the cord to run over sharp edges and keep it well away from hot objects and open flames. Remove the plug from the socket only by pulling the plug.
• Make sure there is no danger of the cord or extension cord inadvertently being pulled out or causing anyone to trip when in use.
• If an extension cord is used, it must be suited to the power consumption of the appliance, otherwise overheating of the extension cord and/or plug may occur.
• This appliance is not suitable for commercial use or outdoor use.
• Never leave the appliance unattended while it is in use.

ATTENTION:

• Children cannot recognize the dangers involved in the incorrect use of electrical appliances. Therefore never allow children to use household appliances without supervision.
• Always remove the plug from the socket when the appliance is not in use and each time before it is cleaned.
• Danger! Nominal voltage is still present in the appliance as long as the appliance is connected to the mains socket.
• Switch the appliance off before disconnecting from the mains.
• Never use the cord to carry the appliance. Use the handle to carry the appliance.

Special security advice

• The protective frame must be closed properly during operation.
• Do not place anything in the protective frame. Do not cover the protective frame during operation.

2 Description of the parts

This sleek and modern high-velocity fan provides more powerful wind than ordinary plastic fans. It draws air off the floor and circulates it through the entire room keeping the room cool and breezy. Put it near the windows and it helps to exchange the hot, stuffy air from the room with fresh air from outside.

• Energy-saving, high velocity motor for maximum air circulation
- Tilt-adjustment for flexible use
- Triple speed selection
- Precision fan blades for powerful wind but low noise
• Solid construction of the chrome stand
• Thermal protection to prevent the motor from overheating

A. Grille Cap
B. Front Grille
C. Clip
D. Fan Blade
E. Rear Grille Securing Screw
F. Safety Screw
G. Rear Grille
H. Carrying Handle
I. Motor Shaft
J. Speed Control Knob
K. Oscillation Knob
L. Motor Housing
M. Fan Head Neck
N. Pole
O. Adjustable Height Knob
P. Fan Base
Q. Weight
R. Washer
S. L-shaped Screw
T. Thumb Screw
U. Motion Screw

V. Hole for Motion Screw W. Securing Knob

V. Hole for Motion Screw

W. Securing Knob

X. Carriage Bolt

3 Operating Instructions

GB

• Ensure that the voltage used corresponds with the voltage indicated.
• Turn the speed control to select the speed: 0 (off) and speeds 1, 2, 3 mean slow, medium, fast.
• Tilting angle: By pushing the tilt guard you can adjust the fan to the elevation preferred.
• Never touch the blades with your hands or any object!
• Do not pull the cord too hard. If is damaged after extensive use, get it repaired by an authorized electrician.
• To clean it: Disconnect the power cord from the mains. Remove the guard and the blades carefully. Do not drop the blades! First use a soft cloth with a little bit of soap to clean off oil stains. Then wipe and polish with a dry cloth. Never use a cleaning agent or any corrosive liquid that will damage the paint, metal or plastic! Put back the blades and lock the guard securely before use

No exchange will be made if the above instructions are not followed. Always test the product first before purchase.

4 Operation – Before using it for the first time

Remove the fan from the packaging.

Mounting – Assembling the stand

1. Remove the 'L' shaped screw and the small washer from the end of the pole
2. Insert the pole into the fan base. Put the weight and the small washer onto the fan base
3. Use the 'L' shaped screw to fasten all parts together.

Pure mechanical diagram showing a shaft and pulley system without any text, numbers, or symbols

Mounting – Assembling the fan

1. Remove the thumb screw from the upper end of the pole.
2. Remove the screws from the motor unit bracket.
3. Attach the motor unit to the pole by placing the fan head neck onto the pole.

4. Reinstall the screws on both sides of the motor unit bracket.

5. Install and tighten the thumb screw to hold the motor unit in place.

6. Make sure appliance is disconnected. Remove the 4 safety screws from the motor unit.

7. Install the rear grille with its handle facing to the motor unit using the 4 screws.

8. Remove the rubber part and turn the groove of the motor shaft upwards.

9. Slide the fan blade onto the motor shaft, aligning and tightening the screw to the groove.

10. Hook the front grille onto the rear grille aligning both screw holes.

11. Install the screw and nut to lock the guards. Close the clips.

Mechanical assembly diagram showing a mechanical component with gears and a cylindrical base (no text or symbols)

Diagram of a multi-tiered fan assembly with a mounted device (no text or labels)

5 Operation - Ventilate

GB

1. Set the fan on the floor, on a level surface.

Simple line drawing of a balloon with a string and two hanging objects (no text or symbols)

1. Adjust the stand to the required height. To do so, loosen the height knob (anticlockwise). Adjust the stand to the required height, and tighten the height knob (by turning it clockwise).

Diagram of a fan with blades and a side-mounted device (no text or symbols)

1. Tilt the fan to the required angle. You can set the fan:

2. to blow horizontally (position a) or angled slightly downwards (position b). Tilt the ventilator housing and motor housing to the required angle

3. to oscillate from left to right (with a sweep of 90°). This will ventilate much of the room. Press the oscillation button on the motor housing fully in.

4. Remain in the same position while the fan is turning. This will ventilate one area. Pull out the oscillation button until you hear it click.

5. Put the plug into the wall socket.

6. Switch on the fan by turning the speed dial:

0 = The fan is switched off
I = The fan operates at low speed.
II = The fan operates at normal speed.
III = The fan operates at high speed.

Close-up of a metallic cylindrical container with a side-mounted knob (no visible text or symbols)

6 Cleaning and maintenance

Over the course of time, dust can accumulate between the spokes of the fan housing, and on the fan blades. Always begin by trying to remove the dust with a brush and/or vacuum cleaner. If this does not remove all the dust, you can always dismantle the fan and clean it.

1. Remove the plug from the wall socket.
2. Release the six clips around the rim of the fan housing.
3. Use a small crosshead screwdriver to loosen the screw at the bottom of the fan housing; hold the bolt at the rear of the fan housing to prevent it from turning.
4. Remove the front grille.
5. Hold the fan blades to prevent them from turning, and use a small crosshead screwdriver to loosen the locking screw. Remove the fan blades from the shaft.
6. Use a crosshead screwdriver to loosen the screws from the motor unit and then remove the rear grille.
7. Clean the dismantled parts and the base with a damp cloth. Dry thoroughly with a dry cloth.

8. Clean the motor unit with a dry cloth.

9. Verify that the appliance is not connected to the power supply before you clean it.

10. Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to clean the appliance.
    — Be careful not to cut yourself on the sharp edges of the fan blades.

Technical line drawing of a fan assembly with a mounted device (no text or symbols)

7 Technical information

GB

• Rated Voltage: 220–240 V
  • Rated Frequency: 50 Hz
  • Power Consumption: 50 Watt

8 Warranty / Disposal / Technical change

Warranty

All products are checked from our company before the delivery. In case that there is a lack on your product, please contact the vendor. Please bring your proof of purchase for guarantees.

Disposal

Please remove the heater properly. You can bring the product to any specialist dealer fort he removal.

Technical changes

Technical changes in technique and design are possible.

Please save the packaging materials of the unit.

Headquarter

Ulisbach, den 29. September 2017

Firma Armin Schmid

Armin Schmid

Festnetz 14 Cent/Minute