ABM 500 E - Drill Alpha Tools - Free user manual and instructions

USER MANUAL ABM 500 E Alpha Tools

Labeled diagram of a black manual oil pusher with numbered parts for identification

3

D

Lieferumfang

ABM 500 E

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Black handheld device with black handle and directional arrows indicating movement or force (no text or symbols)

Scope of delivery package

ABM 500 E,

Quick-change drill chuck 2 -13 mm,

Additional grip with bit stop

Description

1 Quick-change drill chuck

2 Depth stop

3 Additional handle

4 Selector button: drill/hammer

5 Selector button:

clockwise/anticlockwise

6 Speed control

7 Locking button

8 On/Off switch

Technical data

Voltage: 230 V \~ 50 Hz

Power rating: 500 W

Drilling capacity Concrete 13 mm

Steel 10 mm

Wood 20 mm

No Load Speed 0 - 2800 min

Safety insulated II / ☐

Sound pressure level LPA

95 dB(A)

Sound power

level LWA 106 dB(A)

Vibration a_w 15,3 m/s ^2

Weight 1,9 kg

Caution

● The ABM 500 E is not designed for the operating of auxiliary devices.
● Do not use near steams or inflammable liquids.
● Only use sharp bits and suitable screwing bits.
- Remove the plug from the socket for all adjusting and cleaning work.
- Protect the mains cable against any damage. Oil and acids can damage the cable.
- Do not carry the device by the mains cable.
● Do not remove the plug from

GB

the socket by pulling the mains cable.

● Make sure before inserting the plug that the operating switch is not locked.
- When using a cable drum uncoil the cable completely. Cross-section of wire at least 1.5 ~mm^2 .
- Do not overload machine.
- Secure all workpieces to be processed sufficiently.
- Do not allow children to have access.
● Make sure you have a secure stance on ladders or scaffolding when using the drill free-hand.
- Localise lines with a line detector in walls where power, water or gas lines are laid invisibly.
● Wear protection goggles and use a dust mask for dust-producing work.
● Always arrange for a qualified electrician to carry out repairs
● Use only original replacement parts
● The level of noise at the workplace may exceed 85 dB(A). In this case you will need to introduce noise protection measures for the user. The noise generated by this electric tool was measured in accordance with EN 60745-1.
● Vibration measured on the

handle acc. to EN 60745-1.

Maintenance

● Always keep the drill clean.
● Do not use corroding agents for cleaning plastic.
- Check carbon brushes in the case of excessive sparking
- Keep ventilation channels free.

GB

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

On/Off switch:
To switch on: Press switch A
Continuous operation: Lock switch A with locking button B
To switch off: Press switch A briefly
The speed is varied by applying more or less pressure on switch A. You can preselect the speed by turning the knurled screw in switch A.

Black handheld device with a cylindrical body and handle, shown in 3D perspective view (no text or symbols visible)

Rotary switch set for hammer mode. Wait for the drill to stop before changing!
Please note: This switch should be in 'drill' position when drilling holes in tiles.
Rotary switch set for drilling mode. Wait for the drill to stop before changing!

F

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Black handheld device with handle and lever, shown in 3D perspective view (no text or symbols)

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Black handheld device with a handle and cylindrical body, shown with directional arrows indicating movement or force (no text or symbols)

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Black handheld device with handle and lever, shown in 3D perspective view (no text or symbols)

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Stromafbryder:

Black handheld device with a cylindrical body and handle, shown with directional arrows indicating movement or force (no text or symbols visible)

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Pois-/päällekytkin

Close-up of a black handheld device with a handle and lever, showing internal components and directional arrows (no text or symbols)

LIUKUKATKAISIN ASENNOSSA ISKUPOR- AUS. VAIHDA KYTKIMEN ASENTOA VAIN KONEEN OLLESSA PYSÄHDYKSISSÄI

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Black handheld device with a cylindrical body and handle, shown in 3D perspective view (no text or symbols visible)

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Black handheld device with black handle and directional arrows indicating movement or force (no text or symbols)

Close-up of a black manual oil pusher with labeled parts A and B (no text or symbols beyond labels)

Uključivanje/isključivanje:
Uključivanje:
Pritisnite prekidač A.
Stalni rad:
Aretirajte prekidač A pomoću gumba za blo- kiranje B.
Isključivanje:
Kratko pritisnite prekidač A.
Blažim ili jačim pritiskivanjem prekidača A birate broj okretaja. Okretanjem vijka s nazubljenom glavom u prekidaču A možete prethodno podešavati broj okretaja.

Black handheld device with handle and lever, shown in 3D perspective view (no text or symbols)

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Stikalo za vklop in izklop
Vklop:
Pritisnite stikalo A
Neprekinjeno obratovanje:
Stikalo A blokirajte s fiksirnim gumbom B.
Izklop:
Na hitro pritisnite stikalo A.

Black handheld device with handle and lever, shown in 3D perspective view (no text or symbols)

Close-up of a black manual oil pusher with labeled parts A and B (no additional text or symbols visible)

Black handheld device with handle and arrow indicators, no visible text or symbols

Eschenstraße 6 D-94405 Landau/Isar (Germany)

Info-Tel. [phone] • Telefax 09951-26 10 und 52 50

Technical changes subject to change

The product described in these instructions comes with a 5 year warranty covering defects. This 5-year warranty period begins with the passing of risk or when the customer receives the product.

For warranty claims to be accepted, the product has to receive the correct maintenance and be put to the proper use as described in the operating instructions.

Your statutory rights of warranty are naturally unaffected during these 5 years.

This warranty applies in Germany, or in the respective country of the manufacturer's main regional sales partner, as a supplement to local regulations. Please note the details for contacting the customer service center responsible for your region or the service address listed below.

F GARANTIE

E Commercial Finball S.A

H Einbell Hungary Ltd

Vaida Peter u. 12

H 1089 Budapest

Tel. [phone], Fax [phone]

IR Semak

makina ticamt ve sanavi ltd. sti.

Altay Cesme Mah.Yasemin Sok. No: 19

TR 34843 Maltepe - Istanbul

Tel. [phone]. Fax [phone]

RO Einhell Distribution SRL Romania

Technical & Commercial Company

1. Papastratou & Askipiou Sir.

GR 18545 Piräus

Tel [phone], Fax [phone]

①J8 Bernas

Altufyevskoye shoese. 2A

RUS 127273 Moscow

Tel [phone]. Fax [phone]

⑤ Dichita

Metalo str. 23

LT2038 Vilniue

Tel [phone], Fax [phone]

EST AS Rollpl

Rou, Hasalava valci

EE 62102 Tartumaa

Tel [phone], Fax [phone]

(###) Halai Trading Co. LLC

POB 9282, Nakheel Rd. Deira. Shop No. 15

UAE Dubai

Tel:Fax [phone]

(1) Alborz Alzar Co. Ltd

No. 111, Bastan Passage Imam Khomeini Ave.

IH 1114b Teheran Tel: [phone] Fax: [phone]

(K) I.B.G

Belinskij-str. 102

KZ 486008 Chimken

Tel [phone], Fax [phone]

BE FIS d.o.o

Poslovni Centar 98

BIH 87000 Vitez

Tel [phone], Fax [phone]

CS MANIMEX d.a.o

Uzicke republike 93

CS 31000 Uzice

Tel [phone], Fax [phone]

D

The reprinting or reproduction by any other means, in whole or in part, of documentation and papers accompanying products is permitted only with the express consent of ISC GmbH.

F