Endurance Peak 3 - Wireless Earbuds JBL - Free user manual and instructions

Product Type	In-ear wireless earphones
Brand	JBL
Model	Endurance Peak 3
Speaker Size	10 mm / 0.39 inches
Earphone Weight	12.5 g per earphone (25 g combined)
Charging Case Weight	76 g
Earphone Battery Type	Lithium-ion polymer (70 mAh / 3.85 V)
Case Battery Type	Lithium-ion polymer (950 mAh / 3.7 V)
Charging Time	2 hours (from empty)
Music Playtime (BT active)	Up to 10 hours
Talk Time	5.5 hours
Frequency Response	20 Hz - 20 kHz
Impedance	16 ohms
Sensitivity	102 dB SPL at 1 kHz
Maximum Sound Pressure Level	93 dB
Microphone Sensitivity	-38 dBV/Pa at 1 kHz
Bluetooth Version	5.2
Supported Bluetooth Profiles	A2DP V1.3, AVRCP V1.6, HFP V1.7
Bluetooth Frequency Band	2.400 GHz - 2.4835 GHz
Bluetooth Transmitter Power	< 14 dBm
Water Resistance	IP68 (water and dust)
Main Features	TwistLock technology, Ambient Aware, TalkThru, voice assistants, Dual Connect (stereo/mono)
Maximum Operating Temperature	45 °C
Power Supply	5 V / 1 A (via USB charger)
Cleaning	Clean with a soft, dry cloth; do not use chemicals

Frequently Asked Questions - Endurance Peak 3 JBL

How to turn on and connect the JBL Endurance Peak 3 for the first time?

Take the earphones out of the case; they turn on automatically and enter pairing mode. On your Android 6.0+ or iOS device, enable Bluetooth and select "JBL ENDURANCE PEAK 3" from the list of available devices.

What is the battery life of the earphones?

Music playtime with Bluetooth active is up to 10 hours. Talk time is 5.5 hours. The charging case provides an additional 950 mAh capacity.

Are the JBL Endurance Peak 3 water resistant?

Yes, they have IP68 certification, meaning they are dust and water resistant. You can use them in the rain or for sports, but do not intentionally submerge them.

How to use Ambient Aware or TalkThru function?

These functions are accessible via the JBL Headphones app. Once connected, you can enable Ambient Aware to hear surrounding sounds, or TalkThru to lower music and talk without removing the earphones.

Can I use a single earphone in mono mode?

Yes, the Dual Connect feature allows you to use either the left or right earphone independently in mono mode. Ideal for calls or to save battery.

How to reset the earphones to factory settings?

To reset, place the earphones in the case, press and hold the touch buttons on both earphones for about 10 seconds until the LEDs flash red and white.

Can I use the JBL Endurance Peak 3 with voice assistants like Siri or Bixby?

Yes, you can assign a voice assistant via the JBL Headphones app. After assignment, double-pressing on the selected earphone activates the assistant (Siri, Google Assistant, Bixby).

How to maintain and clean the earphones?

Use a soft, dry cloth to clean the surface. Avoid chemicals. The ear tips can be removed and rinsed with clean water, then dried completely before reattaching.

What to do if the Bluetooth connection is unstable?

Make sure the earphones are close to the device (less than 10 meters) and no metal obstacles are interfering. Try resetting the connection by forgetting the device in Bluetooth settings and re-pairing.

How long does it take to fully charge the earphones and case?

The earphones charge completely in 2 hours from the case. The case itself charges via USB-C (5V/1A) and takes about 2 hours for a full charge.

USER MANUAL Endurance Peak 3 JBL

Line drawing of a UBL-branded smartwatch case with striped cover (no text or symbols)

S/M/L

L

B

SCAN ME

APP

JBL HEADPHONES

GET EVEN MORE CONTROL AND PERSONALIZATION OF YOUR LISTENING EXPERIENCE WITH THIS FREE APP.

QR code with central logo containing 'JBL' text and headphones icon

HOW TO WEAR

1 ATTACH EAR TIPS AND ENHANCERS

MIX AND MATCH FOR A PERFECT FIT AND AUDIO PERFORMANCE

S/M/L

2 TWISTLOCK™ TECHNOLOGY

7GB TWISTLOCK 2018 7GB

FIRST TIME USE

UBL 786

POWER ON & CONNECT

graph TD
    A["Step 1: Earbuds"] -->|1| B["JBL"]
    B -->|2| C["L"]
    C -->|3| D["R"]
    D -->|4| E["Automatic Pairing"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333

POWER ON & CONNECT

graph TD
    A["1: JBL L/R"] --> B["2: ON"]
    B --> C["OTHERS ANDROID™ 6.0+"]
    C --> D["Settings: Bluetooth"]
    D --> E["Bluetooth"]
    E --> F["DEVICES"]
    F --> G["JBL ENDURANCE PEAK 3 Connected"]
    G --> H["Now Discoverable"]
    I["JBL ENDURANCE PEAK 3 Tap to pair. Device will be tied to Your Google Account"] --> J["Fast Pair"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#cff,stroke:#333
    style F fill:#ffc,stroke:#333
    style G fill:#cfc,stroke:#333
    style H fill:#fcc,stroke:#333
    style I fill:#ffc,stroke:#333

CHOOSE "JBL ENDURANCE PEAK 3" TO CONNECT

DUAL CONNECT

STEREO MODE

L

R

Line drawing of a UBL-branded VR headset with striped background (no text or symbols)

MONO MODE

L/R

Line drawing of an outdoor electronic device with a logo on the front panel (no readable text or symbols)

CONTROLS

TAP × 1 TAP × 2 TAP × 3 HOLD (2s)

graph TD
    A["L"] --> B["AMBIENT AWARE*"]
    A --> C["TALKTHRU*"]
    A --> D["BIXBY/SIRI®/OTHERS"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333

graph TD
    A[" vinyl ear"] --> B[" Frequency Signal"]
    B --> C[" Channel 1"]
    B --> D[" Channel 2"]
    B --> E[" Channel 3"]
    B --> F[" Channel 4"]
    B --> G[" Channel 5"]
    B --> H[" Channel 6"]
    B --> I[" Channel 7"]
    B --> J[" Channel 8"]
    B --> K[" Channel 9"]
    B --> L[" Channel 10"]
    M["BIXBY/SIRI®/OTHERS"] --> N[" Voice Assistant ** "]
    style M fill:#f9f,stroke:#333
    style N fill:#ccf,stroke:#333

* ENABLE ADVANCE CONTROLS BY CONNECTING YOUR JBL ENDURANCE PEAK3 TO JBL HEADPHONES APP 📄 ** ENABLE YOUR VOICE ASSISTANT THROUGH JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).

VOICEAWARE

Silhouette of a human head with earphones and sound waves, no text or symbols present

JBL ENDURANCE PEAKS Gestures Aircraft Sound capital Hospice & voice Assistant capital VoiceAware Low Mid High Voice Assistant Single Advisors

VoiceAware ① Low Mid High

POWER OFF

JBL ①

MANUAL SETUP

TAP × 1

TAP×2

HOLD (5s)

FACTORY RESETCONNECT TO A NEW BLUETOOTH DEVICE

graph TD
    A["L/R"] --> B["Bluetooth Signal"]
    B --> C["Smartphone"]

graph LR
    A["L/R"] --> B["+"]
    B --> C["JBL"]
    C --> D["+"]
    D --> E["Device with JBL and L/R"]

DO MORE WITH THE APP

JBL ENDURANCE PEAKS Ambient Sound Control A + - Ambient Sound - Equalizer JAZ Gentures

Voice Assistant Google Assistant "Try Available on Assistant" Native Voice Assistant Top & Native Trigger Supported by your voice assistant such as Style

Gestures Left Right Customized Gesture Affect Custom Gesture Top Affect Affect C/C / C/C Double - Top Tap & Hold Accounting Number More devices

*ONLY AVAILABLE ON ANDROID™

CHARGING

WATERPROOF & DUSTPROOF IP68

UBL UBL 30 MINS 0M 1.5 M

Diagram illustrating a three-step process of clothing or garment preparation, showing step-by-step folding and final packaging with blue droplets.

LED BEHAVIORS

Line drawing of a JBL earband device (no text or symbols)

LOW BATTERY CHARGING FULLY CHARGED

Line drawing of a JBL (JL) VR headset with no text or symbols on the body

BT CONNECTING BT CONNECTED BT NOT CONNECTED

TECH SPEC

Model: ENDURANCE PEAK3

Driver size: 10 mm/0.39" Dynamic Driver

Power supply: 5 V —1 A

Earbud: 12.5 g per pc (25 g combined)/0.0275 lbs per pc (0.055 lbs combined)

Charging case: 76 g/0.167 lbs

Earbud battery type: Lithium-ion polymer (70 mAh/ 3.85 V)

Charging case battery type: Lithium-ion polymer (950 mAh/ 3.7 V)

Charging time: 2 hrs from empty

Talk time: 5.5 hrs

Music playtime with BT on: up to 10 hrs

Frequency response: 20 Hz - 20 kHz

Impedance: 16 ohm

Sensitivity: 102 dB SPL@1 kHz

Maximum SPL: 93 dB

Microphone sensitivity: -38 dBV/Pa@1 kHz

Bluetooth version: 5.2

Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7

Bluetooth transmitter frequency range: 2.400 GHz - 2.4835 GHz

Bluetooth transmitter power: < 14 dBm

Bluetooth transmitter modulation: GFSK, π/4 QPSK, 8DPSK

Maximum operation temperature: 45 °C

FRD

CONTENU DE LA BOÎTE APPLICATION

HVAD ER DER I AESKEN

APPEN

Bluetooth-Profilversion: A2DP V1.3, AVRCP V1.6, HFP V1.7

'Ekdoşn proφil Bluetooth: A2DP V1.3, AVRCP V1.6, HFP V1.7

LED-MERKKIVALON TOIMINNOT

Akun varaus vähissä

Latautuu

Täysin ladattu

Bluetooth-profiliversio: A2DP V1.3, AVRCP V1.6, HFP V1.7

Bluetooth-lähettimen

taajuusalue: 2,400 GHz -2,4835 GHz

WATERPROOF & DUSTPROOF IP68

A2DP V1.3,AVRCP V1.6,HFP V1.7

2,400 GHz -2,4835 GHz

< 14 dBm

GFSK, π/4 QPSK, 8DPSK

45°C

NL

VERPAKKINGSINHOUD

APP

MANUELL KONFIGURERING

Koble til en ny Bluetooth-enhet

Tilbakestilling til

fabrikkinnstillinger

GJ∅R MER MED APPEN

Bluetooth-sender: 2,400–2,4835 GHz

Bluetooth-senderens strøm: < 14 dBm

sender: GFSK, π/4 QPSK, 8DPSK

ODPORNE NA WODE I PYŁ, KLASA

OCHRONY IP68

DZIAŁANIE DIODY LED

Bluetooth-profilens version: A2DP V1.3, AVRCP V1.6, HFP V1.7

Bluetooth-sändarens

Ambient Aware (Ortam

Farkındalığı)*

Talkthru

KEGUNAAN LAIN APLIKASI

*Hanya tersedia di Android™

MENGISI DAYA

IP68 TAHAN AIR & DEBU

POLA LED

Daya baterai lemah

Mengisi daya

Daya terisi penuh

BT menyambungkan

BT Tersambung

BT tidak tersambung

SPESIFIKASI TEKNIS

Model: ENDURANCE PEAK3

Ukuran driver: Driver Dinamis 10 mm/0,39"

Catu daya: 5 V ===1 A

A2DP V1.3、AVRCP V1.6、HFP V1.7

2.400GHz-2.4835GHz

<14dBm

GFSK、π/4 QPSK、8DPSK

45℃

-

구성품

안

해당 앤을 통해 천취 경

현은 더욱 효과적으로 제

어하고 개이하한 슈의

습니다

참여다. 참요 바버

이어티 민 이해서 자차

와병하 차요가과 오디오

서느으 의하 미스 애 매치

Twistlock™ 기술

처은 사용

저워 켜기 & 연격

자동 페어링

기타

Andro

Android 0.04

한쪽 0.0275lbs(양쪽 0.055lbs)

충전 케이스:76q/0.167lbs

acceleration: 016500

Sensitivity: 102 dB SPL@1 kHz

Maximum SPL: 93 dB

Microphone sensitivity: -38 dBV/Pa@1 kHz

Bluetooth version: 5.2

Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7

Bluetooth transmitter

frequency range: 2.400 GHz -2.4835 GHz

Bluetooth transmitter power: < 14 dBm

Bluetooth transmitter

modulation:

GFSK, π/4 QPSK, 8DPSK

అంగ్పిక్ర లేటియా:

The image is too blurry to recognize any text content.

תָאַת

הַרְשׁ

תַרְשָׁ

תָרֵ

PTIN

コココ

かや

057

份空

תָא

6.0+

17の

EAK 3

תְקָר

コメコ

בִרְשָׁ

TPS

שְׁרָה

n)\*

Aware

ENDURANCE PEAK3

תְקַרָה בְּרָה

5V=1A

12.5

0.0275

(コナビシュ

76 g/ 0.167 lbs

5 (70 mAh/ 3.85 V)

The Ground Truth image displays a single, solid horizontal line. According to Rule 2 (UNDERSCORE & LINE RULES), this is a stylistic or background line, not a placeholder underscore. Therefore, the OCR result must ignore it and output nothing or only meaningful text. The provided OCR content is "____", which consists of four underscores. This is an incorrect interpretation of the line as a placeholder, violating the rule that stylistic lines must be ignored. The OCR has hallucinated underscores where none should exist based on the GT's visual context. Hence, the OCR result is inconsistent with the Ground Truth.

DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY | DO NOT SHORT CIRCUIT | MAY EXPLODE IF DISPOSED OF IN FIRE | RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE | DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS

IC RF Exposure Information and Statement

The SAR limit of Canada (C) is 1.6 W/kg averaged over one gram of tissue. Device types: (IC: 6132A-JBLENPEAK3) has also been tested against this SAR limit According to this standard, the highest SAR value reported during product certification for head use is 0.99 W / kg.

The device was tested for typical bodily operations where the product was kept 0 mm from the head. To maintain compliance with IC RF exposure requirements, use accessories that maintain a separation distance of 0mm between the user's head and the back of the headset. The use of belt clips, holsters and similar accessories shall not contain metal parts in its assembly. Use of accessories that do not meet these requirements may not comply with IC RF exposure requirements and should be avoided.

Head operation

The device was subjected to a typical head manipulation test. In order to comply with RF exposure requirements, a minimum separation distance of 0 cm must be maintained between the user's ear and the product (including the antenna). Head exposure that do not meet these requirements may not meet RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

IC: 6132A-JBLENPEAK3

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.

Ok Google

Google, Android and Google Play are trademarks of Google LLC.

HP_JBL_ENDURANCE PEAK3_QSG_GLOBAL_SOP_V9