PuroVapor G90031 - Steam cleaner G3 Ferrari - Free user manual and instructions
Find the device manual for free PuroVapor G90031 G3 Ferrari in PDF.
📄
Document temporarily unavailable
The manual is currently being transferred to our new server. It will be accessible again in a few hours. Thank you for your patience.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Steam cleaner |
| Brand | G3 Ferrari |
| Model | PuroVapor G90031 |
| Power supply | AC 220-240 V ~ 50 Hz, 900-1050 W |
| Water tank capacity | 300 ml (max recommended fill 250 ml) |
| Steam pressure | 2.5 to 4.2 bar |
| Steam flow rate | 28 g/min |
| Steam temperature | 135 °C |
| Heating time | Approximately 4 minutes |
| Main functions | Disinfection, sterilization, surface cleaning, clothes, windows, mirrors, tile joints |
| Usage | Domestic and similar applications (kitchens, offices, hotels, etc.) |
| Safety | Safety cap, steam button with lock, automatic shut-off in case of water shortage |
| Maintenance and cleaning | Clean with a damp cloth and mild detergent; do not immerse; accessories washable under running water |
| Included accessories | Short nozzle, main nozzle, flexible hose, round brush, 90° nozzle, brush, mirror brush, cloth, funnel, measuring cup |
| Repairability | Repairs by the manufacturer or an authorized technical service only |
| Recommended water type | Distilled water to avoid clogging (not covered by warranty) |
Frequently Asked Questions - PuroVapor G90031 G3 Ferrari
How to fill the water tank?
Unplug the appliance. Wait for it to cool down, then slowly unscrew the safety cap. Use the funnel and measuring cup provided to pour water up to 250 ml maximum. Do not exceed this capacity to avoid leaks and poor steam production.
How long does it take for the appliance to heat up?
The control light turns off after approximately 4 minutes, indicating that the boiler is ready to produce steam.
How to use the safety lock of the steam button?
The steam button has two modes: automatic release (steam comes out only when pressed) and safety lock. To lock the button in the pressed position, move the lock located at the center of the button. This allows continuous steam emission without having to hold the button.
What to do if the steam jet decreases?
This indicates that the water tank is almost empty. Unplug the appliance, press the steam button to release remaining pressure, wait 5 minutes for cooling, then slowly unscrew the cap. Fill the tank with distilled water using the funnel.
Can I use vinegar or descaling products?
No, never add vinegar, descaling agents, stain removers, or chemicals to the tank. Use only distilled water to avoid clogging. Use of non-recommended products voids the warranty.
How to clean the appliance and its accessories?
Before any cleaning, unplug the appliance and let it cool down. Plastic parts can be cleaned with a damp cloth and mild detergent, then wipe with a dry cloth. Never immerse the motor unit in water. Accessories (brushes, nozzles) can be washed under tap water; dry them completely before reassembling.
What are the important safety precautions?
Never direct steam at people, animals, or electrical equipment. The outlet nozzle becomes very hot: avoid burns. Do not leave the appliance unattended during use. Do not place the power cord near sharp objects or hot surfaces. Always unplug the appliance before filling the tank.
How to assemble the different accessories?
The main nozzle is mounted by aligning the 'I' mark on the nozzle with the 'II' mark on the appliance, then turning clockwise until it locks. The flexible hose attaches in the same way. Brushes and the 90° nozzle are installed at the end of the nozzle or hose using the supplied hexagonal joint. The mirror brush is mounted on the brush by aligning the joints.
What to do if the appliance does not produce steam?
First check that the appliance is plugged in and that the control light has turned off (ready). If the light remains on, wait a bit longer. Check that the tank has enough water. If the problem persists, there may be a malfunction; contact an authorized technical service.
How to dispose of the appliance at the end of its life?
Do not throw the appliance in household waste. It must be taken to an appropriate collection center for waste electrical and electronic equipment (WEEE). Contact your municipality for collection points near you. The appliance contains substances potentially toxic to the environment.
User questions about PuroVapor G90031 G3 Ferrari
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Steam cleaner in PDF format for free! Find your manual PuroVapor G90031 - G3 Ferrari and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PuroVapor G90031 by G3 Ferrari.
