VTBAL29 - Measuring equipment VELLEMAN - Free user manual and instructions

USER MANUAL VTBAL29 VELLEMAN

To all residents of the European Union Important environmental information about this product This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules. If in doubt, contact your local waste disposal authorities. Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If the device was damaged in transit, do not install or use it and contact your dealer.

Keep this device away from children and unauthorized users. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children shall be supervised to ensure that they do not play with the appliance.

Indoor use only. Keep this device away from rain, moisture, splashing and dripping liquids. Never put objects filled with liquids on top of or close to the device.

DO NOT disassemble or open the cover. There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

Keep this device away from dust and extreme temperatures.

Protect this device from shocks and abuse. Avoid brute force when operating the device.

• Familiarise yourself with the functions of the device before actually using it.

• All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.

• Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.

• Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.

• Product images are for illustrative purposes only.

• Do not switch the device on immediately after it has been exposed to changes in temperature. Protect the device against damage by leaving it switched off until it has reached room temperature.

• highly accurate, overload protection

• high-precision load cell

• auto power-off (90 seconds)

Refer to the illustrations on page 2 of this manual.

We recommend using a power adapter if you plan using the scales on a regular basis. If not, powering the scales with batteries will suffice. To insert the batteries, proceed as follows:

1. Open the battery compartment of the weighing platform by sliding the cover toward the outside.

2. Insert two AAA batteries according to the correct polarity.

3. Close the battery compartment.

Remark: Remove the batteries or disconnect from the mains if the scales will not be used for a longer period.

The deported display does not need any powering.

Warning: Do not puncture batteries or throw them in fire as they may explode. Do not

attempt to recharge non-rechargeable batteries (alkaline). Dispose of batteries in accordance with local regulations. Keep batteries away from children.

Replace the batteries as soon as the display shows “L-O”.

6.2 General Operation

1. Place the scales on a levelled surface.

2. Press the on-off button to switch on the scales.

3. Place the item on the platform and wait until the reading on the display is stable.

4. Switch off the scales after use. Note that the scales will switch off automatically 90 seconds after

The scales are overloaded as soon as the display shows “EEEE”. Remove the item from the platform.

2. Press the mode button to select the weighing unit.VTBAL29

2. Place the tare item on the platform.

3. Press the tare button once and wait for the display to show “0.00”.

4. Add the net weight.

2. Press and hold the mode button and wait for the display to show “CAL”. The required calibration

weight will flash on the display. Put the calibration weight in the centre of the platform.

3. Calibration is complete when the display shows “PASS”.

4. The scales go back to the normal weighing mode.

7. Cleaning and Maintenance

The scales do not need any particular maintenance. However, it is advisable to clean them occasionally to keep them looking like new.

8. Technical Specifications

capacity 40 kg resolution 5 g tare range 0-40 kg operating temperature 0 °C ~ 40 °C power supply

Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.velleman.eu. The information in this manual is subject to change without prior notice. © COPYRIGHT NOTICE The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.VTBAL29

• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.

• Velleman® can decide to replace an article with an equivalent article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.

• Not covered by warranty: - all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity...), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits; - consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non-rechargeable, built-in or replaceable), lamps, rubber parts, drive belts... (unlimited list); - flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…; - flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the manufacturer’s instructions; - damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally); - damage resulting from an inappropriate packing and shipping of the article; - all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.

• Articles to be repaired must be delivered to your Velleman® dealer, solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.

• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.

• Repairs occurring after warranty expiration are subject to shipping costs.

• The above conditions are without prejudice to all commercial warranties. The above enumeration is subject to modification according to the article (see article’s manual).