KE4913 - Remote control ONE FOR ALL - Free user manual and instructions

Product Type	Universal Remote Control
Brand	One For All
Model	KE4913
Dimensions (approx.)	20 cm x 5 cm x 2 cm
Weight (with batteries)	Approximately 100 g
Power	2 AAA batteries (alkaline recommended)
Main Functions	TV control, volume, mute, channels, menu, Smart TV, apps (Netflix, YouTube, Amazon), teletext, subtitles, Ambilight, function learning, macro, soundbar control
Number of Keys	Approximately 30 keys including color keys (Red, Green, Yellow, Blue), navigation keys, numeric keys, volume and channel keys, app shortcut keys
Infrared Range	Up to 10 meters (typical)
Compatibility	Recent Philips TVs and other brands via learning or code
Learning	Yes, record functions from an original remote
Programmable Macro	Yes, to launch apps with a sequence of keys
Reset	Yes, via code 977 with green and yellow keys
Audio Control	SimpleSet or code for soundbar/amp
Maintenance and Cleaning	Wipe with a soft, dry cloth. Do not use chemical products.
Safety	Risk of explosion if batteries of incorrect type are used. Use only alkaline batteries. Do not dispose of with household waste.
Spare Parts and Repairability	No spare parts available. In case of failure, replace with an identical model under the 2-year warranty.
Warranty	2 years (manufacturing defects) - contact www.oneforall.com
General Information	Manufactured in accordance with European directives. Recycling at end of life.

Frequently Asked Questions - KE4913 ONE FOR ALL

How to set up the KE4913 remote for my TV?

Most recent Philips TVs respond directly. Otherwise, press and hold the Red and Blue keys until the LED blinks twice, point at the TV and hold the Power button until the TV turns off. Release the key, the LED blinks twice: the remote is ready.

How to record a function from my old remote?

Place the old remote facing the KE4913. Press and hold the Green and Yellow keys until two blinks, then press 975. On the KE4913, press the key to assign (e.g., VOL+). The LED blinks quickly. On the old remote, press the key to copy. Two blinks confirm success. Repeat for other keys and finish with OK for 3 seconds.

How to control the volume of my soundbar with the KE4913?

Use the SimpleSet method: press and hold VOL+ and VOL- until two blinks, then hold the number corresponding to your soundbar brand (e.g., 4 for LG). Release when the sound is muted. Otherwise, use an audio code: press and hold VOL+ and VOL-, enter the 4-digit code from the code list, and test.

How to program a shortcut key for Netflix or YouTube?

Make sure the remote controls the TV. Stand in front of the lit screen. Press and hold the shortcut key (e.g., APP 2 for Netflix) until two blinks. Press the key sequence that launches the app (e.g., HOME, then arrows). Once the app opens, press and hold the shortcut key again until two blinks then turn off.

How to reset the KE4913 remote?

Press and hold the Green and Yellow keys until the LED blinks twice. Press 977. The LED blinks four times, the remote is reset to factory settings.

What to do if some keys do not work after setup?

If some keys do not respond, repeat the setup step with the faulty key: press and hold Red and Blue, point at the TV, then hold the key that does not work (e.g., HOME) until the function appears on screen. Release, the LED blinks twice.

What types of batteries to use and how to replace them?

Use two AAA alkaline batteries. Do not use rechargeable or different type batteries. Open the compartment on the back, insert the batteries respecting polarity, then close. Do not dispose of used batteries with household waste: recycle them according to local regulations.

How to clean the KE4913 remote?

Remove the batteries. Wipe the surface with a soft, slightly damp cloth (water only). Dry immediately. Never use chemicals, alcohol, or solvents. Avoid moisture in the slots.

Can the remote control multiple devices?

The KE4913 is designed primarily to control a TV and a soundbar (or audio receiver). It cannot directly control other devices like a Blu-ray player. However, you can use the learning function to copy commands from other remotes.

Where to find the list of audio codes for manual setup?

The list of audio codes is found in the 'Audio Code List' section of the user manual provided with the remote. You can download the full manual in PDF format from notice-facile.com or from the official One For All website.

USER MANUAL KE4913 ONE FOR ALL

Line drawing of a mechanical component with an arrow indicating downward motion (no text or symbols)

Diagram of a 2x AAA battery internal structure showing internal compartments and casing (no text or symbols)

CAUTION: Risk of explosion if battery is replaced by an Incorrect type. Use quality Alkaline batteries.

Color palette bar with grayscale and red sections, no text or symbols present

POWER 1 APP 1 2 STOP, PAUSE, REC,REW, PLAY,FF 5 GUIDE 6 RED,GREEN, YELLOW, BLUE 9 INFO 10 UP,DOWN, LEFT,RIGHT, OK 12 BACK 13 HOME 15 VOL +/- - 16 0-9 24 SUB 19 SMART 21 3 APP 2 4 4 R 5 GUIDE 7 EXIT 8 SETTINGS OPTION 11 MENU 14 CH +/- - 17 MUTE 18 23 AMBILIGHT 22 INPUT 23 TEXT 20 AMBILIGHT ONE FOR ALL

Color palette bar with grayscale, white, and red sections (no text or symbols)

ENGLISH

1. POWER

Power

10. i

Info

19. SUB

Subtitles

2. APP 1

Amazon App / Shortcut Key

11. OPTIONS

Options

20. TEXT

Teletext

3. APP 2

Netflix / App Shortcut Key

12. UP, DOWN, LEFT, RIGHT, OK

Navigate the Menu

21. SMART

Smart TV

4. APP 3

YouTube / App Shortcut Key

13. BACK

Back, Last Channel

22. INPUT

Input Select

5.STOP,PAUSE,

REC, REW, PLAY, FF back control

14. MENU

Menu

23. AMBILIGHT

Ambilight

6. GUIDE

Guide

15. HOME

Home

24. 0-9

Digits for Channel

7. SETTINGS

Tools, Settings

16. VOL + / -

Volume Up and n

Note that depending on the model of your Philips TV, not all keys may be applicable.

8. EXIT

Menu Exit, TV

17. CH + / -

Channel Up and n

9.RED,GREEN,

YELLOW, BLUE Fastext

18. MUTE

Mute

STEP 1: SET UP YOUR TELEVISION

THE MAJORITY OF NEWER PHILIPS TV'S SHOULD WORK DIRECTLY.

After putting batteries in, just test some of the keys, and if they work, your remote is ready. If not, follow the next steps:

1. Make sure your TV is on (not on standby).

2. Hold down Red + Blue until the LED behind the

Power Key blinks twice.

3.

until the LED behind the

Power Key blinks twice.

1. The remote will send a different Power signal every

Point towards the TV and hold down the Power key until the TV turns off

3 seconds. As soon as the TV turns off, let go of the Power key.

1. The light will blink twice. Now test the rest of the keys on the remote, if they work as your original did, your remote is ready to use. If you find some keys do not work as expected (or at all), proceed to the next step.

- If you find some keys still do not work as expected (or at all), proceed to the next step.

Color palette bar with grayscale and red sections, no text or symbols present

ENGLISH

STEP 2: IF STEP 1 DOES NOT WORK AS EXPECTED

ARE SOME KEYS NOT WORKING AS EXPECTED?

If you find some keys do not work as expected (or at all), proceed to the next step.

1. Make sure your TV is on (not on standby).
2. Held down RED + BLUE until the LED behind the Power Key blinks twice
3. Point towards the TV and hold one of the keys that is not working correctly (for example Menu).
4. The remote will send a signal every 3 seconds.
5. When the correct function is shown on the screen (in this case the menu), let go of the key.
6. The LED will blink twice - your remote is ready to use.

LEARNING

LEARN A NEW FUNCTION TO YOUR REMOTE

Your One For All remote can learn any function from your original (working) remote.

2-5 CM

1. Place the original remote facing the One For All remote on a flat surface.
2. To learn: Hold down GREEN + YELLOW until the LED blinks twice.
3. Press 975. The LED will blink twice.
4. Press the key on the One For All remote you want to learn on, for Example: the VOL + key. The LED will blink rapidly.
5. Press the key on the Original remote you want to learn, for Example: the VOL + key of your Audio Device
   6.Twoblinks:ok. Repeat from step 4 for any more keys to learn. Long blink: try again from step 4.
6. When you have learned all the keys you need, press and hold the OK key for 3 seconds. The LED will blink twice.

HOW TO DELETE A LEARNED FUNCTION

1. Hold down GREEN + YELLOW until the LED blinks twice.
2. Press 976.
3. Press the key to reset twice.
4. The LED flashes twice and the key will revert to the original function.

4

Color palette bar with grayscale shades and a red horizontal bar at the bottom (no text or symbols)

ENGLISH

SOUND BAR / AUDIO RECEIVER VOLUME CONTROL

SOUND BAR / AUDIO RECEIVER VOLUME CONTROL

If you have your TV connected to a Sound Bar or Audio Receiver, it's possible to set up your One For All remote to control the Volume and Mute of this device. There are two ways to do this:

AUDIO SIMPLESET

If you have a Sound Bar or Audio Device from one of the brands listed in the table below, you can use the SimpleSet method to program your remote to control it. If you do not have one of the below brands, please proceed to the next section.

Digit	Brand
1	Bose
2	Denon
3	Samsung / Harman/Kardon / JBL
4	LG / JVC
5	Marantz / Philips
6	Onkyo
7	Panasonic / Technics
8	Pioneer
9	Sony
0	Yamaha

Note that each of the brands has a digit associated with it, for example 4 for LG (and JVC).

To set up your remote to control your Sound Bar / Audio Device, first make sure your TV and Sound Bar / Audio Device are both powered on, and that there is something playing that you can hear (this procedure will test the Mute function). Next:

1. Hold down the VOLUME UP and VOLUME DOWN buttons together until the LED under the POWER key blinks twice.
2. Now point the remote towards your Sound Bar / Audio Devices and hold down the digit key for your brand (for example 4 for LG). The remote will send the Mute function to your device every 3 seconds.
3. As soon as your Sound Bar / Audio Device mutes the volume, release the digit key. The LED under the Power key will blink twice, and the Volume Up, Down and Mute keys should now control your Sound Bar / Audio Device.

AUDIO CODE SETUP

If your Sound Bar / Audio Device is not one of the brands listed above, you can also set up the remote to control it by entering a 4 digit code. The codes are listed in the Audio Codelist section of this manual, and are listed by brand and then popularity. Locate the brand of your Sound Bar / Audio Device in this code list and then the procedure is:

ENGLISH

1. Hold down the VOLUME UP and VOLUME DOWN keys until the LED under the Power key blinks twice.
2. Enter the first 4 digit code for your Sound Bar / Audio Device. The LED should blink twice on the last digit.
3. Now try the Volume Up, Down and Mute and see if they control your Sound Bar or Audio Device.
4. If they work, your remote is set up. If not try again from step 1 using the next code in the list.

POWER MACRO

If you have set up your Sound Bar or Audio Device using SimpleSet or Code Setup, you can now turn your TV and Audio Device both on and off using a single key. Simply hold down the Power key for 3 seconds and the remote will send the Power function to both the TV and the Audio Device / Sound Bar. If you press and release the key, it will only control the TV.

APP SHORTCUT KEYS

The One For All remote features three App Shortcut Keys which can be used to open apps on your TV. If your original remote control has an Amazon App, Netflix, or YouTube key, these keys will perform the same function.

However if you try these keys and they do not work, but your TV still has the ability to watch a streaming service, you can use this key as a shortcut by programming a macro (a series of button presses) on it. You could also program the keys to access other apps on your TV.

To program the macro, you first need to know the sequence keys you use to access the service. For example, some TVs will start Netflix by pressing the Home key, then Menu Right twice, and finally the Enter key. Once you have determined the sequence for the app you want on your TV, follow these steps:

1. Sit in front of your device with It switched on (not on standby)
2. Hold down the App Shortcut key until the LED blinks twice.
3. Now perform the sequence of keys exactly as would normally. The remote will operate your TV and the macro is recorded in real time - so if it normally takes a few seconds for your device to react don't worry.
4. Once you have finished the sequence - and the Streaming Service has started on your device - hold down the App Shortcut key until the LED blinks twice and goes out. The macro is now stored.

Tips

• Make sure the OFA remote Is operating the TV before programming
- If you find the Macro doesn't work as expected, you can just repeat the same sequence to reprogram
- When programming, wait for your TV to respond first, the remote will remember the timing

RESET

If you would like to reset your remote back to its default settings, please do the following:

1. Hold down the Green and Yellow keys until the LED blinks twice
2. Press 977
3. The LED will blink 4 times and the remote is now reset.

DEUTSCH

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

DEUTSCH

LAUTSTÄRKEREGLER FÜR SOUNDBAR/AUDIOEMPFÄNGER

LAUTSTÄRKEREGLER FÜR SOUNDBAR/AUDIOEMPFÄNGERI

5. REW, PLAY, FF, REC, PAUSE, STOP

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

FRANÇAIS

ÉTAPE 2 : DANS LE CAS OÙ L'ÉTAPE 1 NE FONCTIONNE PAS COMME PRÉVU

CERTAINES TOUCHES NE FONCTIONNENT-ELLES PAS COMME PRÉVU ?

Color palette bar with grayscale shades and a red horizontal bar at the bottom (no text or symbols)

FRANÇAIS

CONTRÔLE DU VOLUME DE LA BARRE DE SON/DU RÉCEPTEUR AUDIO

CONTRÔLE DU VOLUME DE LA BARRE DE SON/DU RÉCEPTEUR AUDIO

MACRO ASSOCIÉE AU BOUTON D'ALIMENTATION

Color palette bar with grayscale gradient and a red horizontal bar, no text or symbols present

ESPAÑOL

PASO 2 : SI EL PASO 1 NO FUNCIONA COMO SE ESPERA

Diagram showing two remote control panels with keypad and function buttons, connected by a signal icon labeled '2-5 CM'.

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

ESPAÑOL

CONTROL DEL VOLUMEN DE BARRA DE SONIDO / RECEPTOR DE AUDIO

CONTROL DEL VOLUMEN DE BARRA DE SONIDO / RECEPTOR DE AUDIO

5. REW, PLAY, FF, REC, PAUSE, STOP

Diagram showing two remote control panels with keypad and function buttons, connected by a wireless signal icon.

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

PORTUGUÊS

CONTROLO DE VOLUME BARRA DE SOM/RECETOR ÁUDIO

CONTROLO DE VOLUME BARRA DE SOM/RECETOR AUDIO

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

ITALIANO

PASSAGGIO 2: SE IL PASSAGGIO 1 NON FUNZIONA COME PREVISTO

ALCUNI TASTI NON FUNZIONANO COME PREVISTO?

Diagram showing two remote control panels with labeled buttons and a Wi-Fi signal icon, likely illustrating wireless or remote control interface.

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

ITALIANO

CONTROLLO DEL VOLUME DEL RICEVITORE AUDIO/DELLA SOUND BAR

CONTROLLO DEL VOLUME DEL RICEVITORE AUDIO/DELLA SOUND BAR

5. REW, PLAY, FF, REC, PAUSE, STOP

Afspelen beheren

6. GUIDE

Gids

7. SETTINGS

Tools, instellingen

8. EXIT

Menu afsluiten

9. ROOD, GROEN, GEEL, BLAUW Fastext, ABCD

1. INFO Info

11. OPTION Optie, tools

12. OMHOOG, OMLAAG, LINKS, RECHTS, OK Navigeren in het menu

13. BACK

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

NEDERLANDS

STAP 2: ALS STAP 1 NIET DE VERWACHTE RESULTATEN OPLEVERT

WERKEN BEPAALDE TOETSEN NIET ZOALS VERWACHT?

SNELTOETSEN VOOR APPS

Color palette bar with grayscale gradient and a red horizontal bar, no text or symbols present

DANSK

TRIN 2: HVIS TRIN 1 IKKE FUNGERER SOM FORVENTET

FUNGERER NOGLE TASTER IKKE SOM FORVENTET?

Color palette bar with grayscale shades and a red horizontal bar at the bottom (no text or symbols)

DANSK

LYDSTYRKEREGULERING FOR SOUNDBAR/LYDMODTAGER

LYDSTYRKEREGULERING FOR SOUNDBAR/LYDMODTAGER

INDSTILLING AF LYDKODE

TRINN 1: SETTE OPP TV-APPARATET

FLESTEPARTEN AV NYERE TV-APPARATER FRA PHILIPS VIL VIRKE DIREKTE.

Color palette bar with grayscale and red sections, no text or symbols present

NORSK

TRINN 2: HVIS TRINN 1 IKKE VIRKER SOM FORVENTET

ER DET NOEN KNAPPER SOM IKKE VIRKER SOM FORVENTET?

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

NORSK

VOLUMKONTROLL FOR LYDPLANKE/LYDMOTTAKER

VOLUMKONTROLL FOR LYDPLANKE/LYDMOTTAKER

Color palette bar with grayscale gradient and a red horizontal bar, no text or symbols present

SVERIGE

1. STRÖM

Slå på/stäng av

8. EXIT

Stäng menyn

17. CH + / -

Kanal upp och ned

2. APP 1

Amazon App/

appgenvägsknapp

9.

RÖD, GRÖN, GUL, 18. TYST

BLÅ

Fastext, ABCD

Tyst

3. APP 2

Color palette bar with grayscale and red sections, no text or symbols present

SVERIGE

STEG 2: INTE FUNGERAR SOM DET SKA

FUNGERAR EN DEL KNAPPAR INTE SOM DE SKA?

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

SVERIGE

VOLYMREGLERING FÖR SOUNDBAR/LJUDMOTTAGARE

VOLYMREGLERING FÖR SOUNDBAR/LJUDMOTTAGARE

Color palette bar with grayscale gradient, a red rectangle at bottom, and a crosshair symbol (no text or labels)

SUOMI

1. VIRTA

Virtapainike

8. EXIT

Sulje valikko

16. VOL + / -

Äänenvoimakkuus +

ja -

2. SOVELLUS 1

Amazon App / sovel en pikapainike

9.

PUNAINEN,

VIHREÄ, KELTAINEN, SININEN

17. CH + / -

1. YLÖS, ALAS, VASEMMALLE, OIKEALLE, OK

Liiku valikossa

21. SMART

Smart TV

13. BACK

Edellinen valikkotāsdon valinta

22. TULO

23. AMBILIGHT

Ambilight

6. GUIDE

Opas

14. MENU

Valikko

23.0-9

Kanavan valintanumerot

7. SETTINGS

Työkalut, asetukset

VAIHE 1: TELEVISION ASETUSTEN TEKEMINEN

USEIMPIEN UUSIEN PHILIPS-TELEVISIOIDEN PITÄISI TOIMIA SUORAAN.

Color palette bar with grayscale, white, and red sections (no text or symbols)

SUOMI

VAIHE 2: JOS VAIHE 1 EI TOIMI ODOTETUSTI

TOIMIVATKO KAIKKI PAINIKKEET ODOTETUSTI?

Diagram showing two remote control panels with keypad and function buttons, connected by a wireless signal icon.

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

SUOMI

SOUNDBARIN/ÄÄNIVASTAANOTTIMEN ÄÄNENVOI MAKKUUDEN HALLINTA

SOUNDBARIN/ÄÄNIVASTAANOTTIMEN ÄÄNENVOIMAKKUUDEN HALLINTA

5. REW, PLAY, FF, REC, PAUSE, STOP

Color palette bar with grayscale, white, and red sections (no text or symbols)

ΕΛΛΗΝΙΚΑ

Diagram showing a remote control with keypad and keypad connected to a keypad via wireless signal output

Color palette bar with grayscale swatches and a red rectangle at the bottom (no text or symbols)

ΕΛΛΗΝΙΚΑ

Color palette bar with grayscale, white, and red sections (no text or symbols)

TÜRKÇE

ADIM 2 : ADIM 1 BEKLENDIĞI GIBI ÇALIŞMAZSA

Color palette bar with grayscale, white, and red sections (no text or symbols)

POLSKI

KROK 2: JEŚLI REALIZACJA KROKU 1 NIE POWIODŁA SIĘ

CZY NIEKTÓRE PRZYCISKI NIE DZIAŁAJĄ PRAWIDŁOWO?

Diagram showing two electronic device modules with labeled buttons and a central indicator symbol, likely representing a remote control or interface.

5. REW, PLAY, FF, REC, PAUSE, STOP

Tlačítka přehrávání

13. BACK

Diagram showing two remote control panels with labeled buttons and a Wi-Fi signal indicator

12. FEL, LE, BALRA, JOBBRA, OK

Navigálás a menüben

13. BACK

Color palette bar with grayscale and red sections, no text or symbols present

MAGYAR

2. LÉPÉS: HA AZ 1. LÉPÉS NEM A VÁRT EREDMÉNYT HOZZA

NÉHÁNY GOMB NEM A VÁRT MÓDON MÜKÖDIK?

5. REW, PLAY, FF, REC, PAUSE, STOP

Diagram showing two remote control panels with icons and a 2:1 ON signal indicator

Color palette bar with grayscale and red sections, no text or symbols present

ROMÂNĂ

PASUL 2: DACĂ PASUL 1 NU FUNCȚIONEAZĂ CORECT

UNELE BUTOANE NU FUNCTIONEAZĂ CORECT?

Diagram showing two remote control panels with labeled buttons and a Wi-Fi signal icon, likely illustrating a home control interface.

Color palette bar with grayscale and red sections, no text or symbols present

HRVATSKI

2. KORAK: AKO 1. KORAK NE RADI U SKLADU S OČEKIVANJIMA

NEKE TIPKE NE RADE U SKLADU S OČEKIVANJIMA?

The crossed out wheeled bin symbol on this product ensures that this product is manufactured using high quality components that can be recycled and reused according European Directive 2012/19/EU. Please do not dispose of this product with your normal household waste, refer to local regulations for the proper collection or disposal of electrical and electronic products. This will help this will help in preventing negative effects on the environment and/or human health.

BATTERY DISPOSAL (EUROPEAN DIRECTIVE 2006/66/EC)

Please do not dispose of your batteries with your normal household waste, refer to local regulations for the proper collection or disposal. This will help preventing potential negative effects on the environment and/or human health.

GUARANTEE TERMS AND CONDITIONS UNIVERSAL ELECTRONICS warrants to the original purchaser that this product will be free from defects in materials and workmanship under normal and correct use for a period of two (2) years from the date of original purchase. This product will be repaired or if necessary, replaced free of charge if it has been proven to be defective within the two(2) year warranty period. The forwarding costs are on the account of the owner; the costs of returning the product are on the account of UNIVERSAL ELECTRONICS.

This warranty does not cover damage or failures caused by products or services not supplied by UNIVERSAL ELECTRONICS, or which result from not mounting the product according to manual instructions. This also applies when the product has been modified / repaired by others than UNIVERSAL ELECTRONICS or if a fault is the result of accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, improper maintenance, alteration, modifications, fire, water, lightning, natural disasters, wrong use or carelessness.

To obtain warranty service during the warranty period contact [...], and please note that we need your original purchase receipt so that we may establish your eligibility for service. If you have bought this product for purposes which are not related to your trade, business or profession, you may have legal rights under your national legislation governing the sale of consumer goods. This guarantee does not affect those rights. www.oneforall.com

UTYLIZACJA BATERII (DYREKTYWA EUROPEJSKA 2006/66/WE)

Color palette bar with grayscale gradient, a red rectangle at the bottom, and a black crosshair on the right (no text or symbols)

ELIMINAREA BATERIEI (DIRECTIVA EUROPEANĂ 2006/66/CE)

Color palette bar with grayscale gradient and a red horizontal bar, no text or symbols present

AUDIO CODELIST

Pyle	4242	Teac	0609, 1199, 3253,
Quasar	0039		4242
RCA 0300, 1459, 0082		Technics	0309, 0308, 0039,
Restek	0189		0208
Revox 0140, 0189, 0269		TechniSat	4134, 4486
Rotel	0793	Techwood	0609
Samsung 2660, 2809, 1199,		Teufel 4051, 3296, 3574,
	2137, 3822, 1304		4477, 2322, 4159,
Sansui 0189, 0609			4460, 4559
Sanyo	3282	Thomson 1194, 3654
Schaub Lorenz 4242		Thorens	0269, 0189
Sentra	0688	Toshiba	3627, 5070
Sharp 3096, 5070		Universum	0609, 0269, 0189
Siemens	0609	Victor	0074
Sonos	3919	Wards	0013, 0158, 0189
Sony	0158, 0159, 2522,	Yamaha	0176, 1276, 2061,
	1758		2467, 3283, 2469,
Soundwave	0609		0082, 0848, 1176,
Sunfire	0313		1949, 0354, 3267,
Sungpo	3096, 5070		3602, 2342
T+A 2302, 1270

Connect with us

712183 RDN 1230920

Universal Electronics BV – Europe & International P.O. Box 3332, 7500 DH Enschede The Netherlands

URC 4913 Philips: PHILIPS* is a registered trademark of Koninklijke Philips N.V.