VT 360 Twist - Fan STEBA - Free user manual and instructions

USER MANUAL VT 360 Twist STEBA

for normal program with wind speed 1 to 4

for natural wind with different speeds

for sleep mode ∙ The wind speed can be set regardless of the choosen mode. ∙ The right-left oscillation is turned on by pressing the button . The choosen program continues. By pressing the button again, the oscillationis turned off. ∙ By pressing the button , the 3D ocsillation is turned on. Th choosen program continues. ∙ If a specific setting of the air outlet should be fixed, interrupt the oscillation by pressing the button once the desired setting is obtained. Further program settings are possible.

∙ The 3D oscillation and the right-left oscillation can be used simutaneously. ∙ By pressing the button the timer can be set from 1 to 8 hours.by the push of the button the time is changed by one hour. The display alternately shows the sym- bols for the chosen mode and the timer. Once the time run out, the device turns off. If the timer “0” is chosen, the timer symbol disappears after same seconds. Remote Control ∙ The remote control is placed sidewise on the base of the device. ∙ The remote control can be used with a battery of type CR2025 or CR2032. Batteries are not included to the scope of delivery.12 Information requirements Steba VT 360 Description Sym- bol Va- lue Unit Maximum fan flow rate F 15,8 m