City Mini GT2 Double - Stroller BABY JOGGER - Free user manual and instructions

Product Type	Double Stroller
Brand	Baby Jogger
Model	City Mini GT2 Double
Number of Seats	2
Maximum Weight per Child	29.5 kg (65 lb)
Recommended Total Weight	35 kg (77 lb)
Approximate Dimensions (L x W x H)	114.3 x 76.2 x 106.7 cm
Stroller Weight (approx.)	Approximately 14.5 kg
Frame Material	Metal
Front Wheel Type	Swivel wheels with lock
Rear Wheel Type	Fixed wheels
Brake	Parking brake lever
Safety Harness	5-point harness with pads
Seat Recline	Yes, adjustable via clamp behind the seat
Canopy	Yes, with window and retractable shade
Fold	Compact folding mechanism with strap and auto-lock
Storage Basket	Capacity 4.5 kg (10 lb)
Seat Back Pocket	Capacity 1 kg (2 lb)
Compatible Accessories	Baby Jogger, Graco, Britax car seats (canopy removed or in UP position)
Frame Warranty	Limited lifetime
Fabric and Parts Warranty	1 year
Fabric Care	Hand or machine wash delicate cycle cold water with mild detergent. Do not use bleach, do not machine dry, do not iron, do not dry clean.
Plastic and Metal Parts Care	Wipe clean with mild soap and warm water
Recommended Use	Do not use for jogging, running, or skating

Frequently Asked Questions - City Mini GT2 Double BABY JOGGER

How to fold the City Mini GT2 Double stroller?

Make sure the child is removed, front wheels are unlocked, and all accessories are removed. Press the buttons on both sides of the frame, turn the handle upward, then insert your finger into the loop and pull up. Then pull the fold handle marked 'Pull to Fold' and let the frame fold. Check that the auto-lock lever engages.

How to adjust the seat recline?

Squeeze the clamp behind the seat and slide it down to recline the seat. Lower the seat on both sides to match the clamp position. To return to upright, reverse the steps. Ensure the child's head, arms, and legs are away from moving parts.

How to install and remove the front wheels?

To install: place the stroller handle on the ground, insert the front wheel into the base until it clicks. To remove: press the front wheel release button and slide the wheel out of its base. Make sure the wheels are securely attached before use.

How to use the parking brake?

To lock the brakes, gently lift the brake lever to vertical position until it clicks. To unlock, pinch the gray tabs and pull the lever toward you, then lower it until it is parallel with the frame. Always lock the brakes before placing or removing the child.

How to clean the stroller?

For fabric: hand or machine wash cold with mild detergent (delicate cycle). Do not use bleach, do not machine dry, do not iron, do not dry clean. For plastic and metal parts: wipe with mild soap and warm water, then dry completely. Do not use solvent or caustic/abrasive products.

What is the maximum weight allowed per child?

Each child can weigh up to 29.5 kg (65 lb) and measure up to 101.6 cm (40 in). Total stroller weight (children + accessories) must not exceed 35 kg (77 lb).

Can I use a car seat with this stroller?

Yes, you can use a car seat from Baby Jogger, Graco, or Britax. For Baby Jogger/Graco/Britax car seats, the canopy must be in the UP position. For other brands, the canopy must be removed. Make sure the car seat is properly attached before use.

How to adjust the safety harness to fit the child?

From the back of the seat, open the pocket and locate the square plastic stop on the shoulder strap. Rotate the stop and pass it through the openings in the polyethylene panel and fabric. Reinsert it into the opening closest to the child's shoulders. Pull the strap to check locking. Adjust tension by sliding the harness pads and pulling on the plastic guide.

Is the stroller suitable for jogging?

No, this stroller is not designed for running, jogging, skating, or inline skating. It is intended for walking only. Although the front wheels can be locked in a fixed position, this does not allow running.

How to maintain the wheels and avoid squeaks?

Regularly check that the joints and hinges are in good condition. If squeaks are heard or resistance appears, have the stroller lubricated by an authorized dealer. For cleaning, wipe the wheels with mild soap and warm water, then dry them completely with a soft cloth.

USER MANUAL City Mini GT2 Double BABY JOGGER

Line drawing of a stroller with front wheel, seatbelt, and gidded skirt (no text or symbols)

©2023 Baby Jogger NWL0001531729A 5/23

Stroller Use Positions Posiciones de uso del cochecito Position d'utilisation de la poussette

Accessories sold separately Los accesorios se venden por separado Les accessoires sont vendus séparément.

Technical diagram of a stroller with numbered parts and corresponding close-ups of the body parts, likely for educational or technical reference.

1 Handlebar
2 Handlebar Fold Button
3 Canopy
4 Parking Brake
5 Auto-Lock
6 Harness Pads
7 Harness Buckle
8 Crotch Strap Pad
9 Fold Strap

10 Rear Wheel
11 Rear Wheel Release Button
12 Storage Basket
13 Leg Support
14 Footwell
15 Front Wheel Release Button
16 Swivel/Lock
17 Front Wheel
18 Seat Recline Strap

Diagram illustrating a tool tip with highlighted part and rotation arrow, showing mechanical assembly and component alignment.

Line drawing of a mechanical device with a red curved arrow indicating rotation (no text or symbols)

3 CLICK! CLICK! iCLICK!

4

5

6

7 Lock

8

9

10 Lock

11

12

Technical line drawing of a car seatbelt with red directional arrows indicating movement or force (no text or symbols)

Illustration of a baby seat with red fabric and orange band, showing mechanical components and motion arrows (no text or symbols)

Illustration of a car's seat area with a highlighted rectangular area, no text or symbols present

Illustration of a hand holding a white object with a red arrow indicating motion or force direction (no text or symbols)

Illustration of hands tying a knot with a red string (no text or symbols)

17

Line drawing of a bicycle stroller with red-handled lever mechanism (no text or symbols)

18

Illustration of a hand adjusting a seatbelt buckle, showing the correct and incorrect states (no text or symbols present)

20

21

Illustration of a hand holding a syringe with a red arrow indicating force or movement (no text or symbols)

22

23 CLICK! CLIC! iCLIC!

Diagram of a mechanical assembly with three vertical rods and a central circular component (no text or symbols)

25

Line drawing of a person using a stroller to lift a vehicle, with a red arrow indicating the motion direction (no text or symbols present)

Illustration of a hand placing a red fabric onto a stroller inside a vehicle (no text or symbols)

Illustration of hands holding a rolled-up document with a red circular object, no text or symbols present

Technical line drawing of a mechanical device with mesh cover and handle (no text or symbols)

Illustration of a hand holding a chair with a seatbelt, no text or symbols present

Illustration of a person using a medical device to lift a patient's seat, with no visible text or symbols.

29

Illustration of a bicycle seatbelt with red motion arrows indicating rotation (no text or symbols)

32

33

Line drawing of a bicycle hover with red directional arrows indicating motion (no text or symbols)

35

36 D

37

38

Illustration of a hand operating a bicycle steering wheel with a red arrow indicating rotation (no text or symbols present)

Illustration of a stroller with wheels and a red bag, no text or symbols present

39 B C A

Diagram showing a hand adjusting a red mechanical component with arrows indicating motion (no text or symbols present)

B

Illustration of a hand adjusting a red mechanical component, possibly a valve or grip, with no visible text or symbols.

Diagram of a mechanical component with a red highlighted section, no visible text or symbols

Illustration of a hand holding a red mechanical clip attached to a door, with no visible text or symbols.

41

42

43

Illustration of a baby stroller with a red arrow indicating motion (no text or symbols)

WARNING

IMPORTANT - Keep these instructions for future reference.

Read these instructions carefully before use. Your child's safety may be affected if you do not follow these instructions.

• This stroller is suitable for one child up to 65lb (29.5 kb) in weight and 40 in (101.6 cm) in height.
• Total weight load recommended for this stroller is 77 lb (35 kg); 65 lb (29.5 kg) in the seat, 2 lb (1 kg) in the seat back pocket, and 10 lb (4.5 kg) in the basket. Excessive weight may cause a hazardous unstable condition to exist.
• This stroller is not suitable for running, jogging, skating or inline skating.
  • Never leave your child unattended.
• Avoid serious injury from falling or sliding out. Always properly adjust and fasten seat belt or infant car seat harness.
• To prevent injury, remove child tray or belly bar accessory when folding or unfolding the stroller.
• Do not let your child play with this product.
• Parcels or accessory items, or both, placed on the unit may cause the unit to become unstable.
• Any load attached to the handle affects the stability of the stroller. Do not hang bags from the handle.
• Always tightly secure the hook & loop fasteners between the canopy and seat back when the canopy is installed.
• Ensure that all the locking devices are engaged before use.

• Lock the brakes before loading and unloading your child and whenever the stroller is not moving.

• Always keep fingers and children away from moving parts when folding, unfolding, or adjusting the stroller to prevent finger/body part entrapment or pinching.

• Stroller is not meant to be used for transporting children up or down stairs or escalators. Damage resulting to stroller will not be covered under warranty.
• This stroller does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable pram body, cot, or bed.
• Accessories which are not approved by Baby Jogger shall not be used.
• Check that the car seat attachment devices are correctly engaged before use.
• For new born babies we recommend always to use the most reclined seat position.
• Only use replacement parts which are supplied or approved by Baby Jogger.
• Discontinue using your stroller should it become damaged or broken.

FRAME

1 Unpack the stroller frame from the box and set the wheels aside.
Unlock the stroller by pulling the storage lock lever.
2 Unfold the stroller by pulling the handlebar away from the frame. The stroller will lock into place and you will hear a click.
3 Place the stroller in the upright position.

WARNING: Ensure that all the locking devices are engaged before use.

FRONT WHEELS

4Installation

• Lay stroller on its back so the handlebar is resting on the floor.
• Attach the front wheel by sliding it into the front wheel mount until it clicks. Gently pull on the front wheel to make sure it is properly attached.

5Removal

- While pressing the front wheel release button, gently slide the front wheel out of the front wheel mount.

SWIVEL FEATURE

6 Push the swivel button down and rotate to the left to lock the front wheel assembly in a fixed position for long distance strolling.
7 Push the swivel button down and rotate to the right to allow the front wheel assembly to swivel.

WARNING: When loading and unloading child, lock the front wheel in a fixed position. Although the front wheel of your stroller locks, it is not intended for jogging or exercise purposes.

REAR WHEELS

8Installation

• Align the rear wheel axle with the wheel mount on the stroller frame and insert it into the wheel mount until it locks into place. You will hear a click.
• Gently pull on the rear wheel to make sure it is properly attached.

9Removal

- While pressing down on the wheel release button, gently slide the rear wheel out of the wheel mount.

BRAKE

10 To lock the brakes: gently pull the brake lever into upright position until it clicks into place.
11 To Release the brakes: Pinch the gray tabs and pull the lever towards you. Push the brake lever down until it is parallel with the frame.

WARNING: Lock the brakes before loading and unloading your child and whenever the stroller is not moving.

CANOPY

12 Attach the canopy to the frame by sliding the canopy onto the mounting bracket. To remove, slide canopy off of mounts.
NOTE: When using a Baby Jogger, Graco or Britax car seat, the canopy can be attached. For all other car seats, canopy must be removed.
13 Snap the two snaps to the stroller frame.
14 Zip the back of the seat to the canopy top. Attach the 2 fastening strips on the side of the canopy.
15 Pull forward to open canopy and push backwards to close canopy.
16 To use the canopy window, roll the shade up towards the top and secure with the elastic and button.

HANDLE

17 To change the handle to one of 6 use positions, press the handle release buttons on both sides and rotate up or down to the new position.

ADJUSTING SAFETY HARNESS

18 From the back of the seat, unfasten and open the pocket to locate the plastic square stopper. Turn stopper and pass through the openings in the PE board and seat fabric.

19 Reinsert stopper at seat opening closest to child's shoulders. Pass back through seat fabric and PE board. Tug on strap to ensure stopper is locked. Repeat on both sides.

WARNING: Avoid serious injury from falling or sliding out. Always properly adjust and fasten safety harness.

WARNING: Always use the crotch strap in combination with the shoulder straps and waist belt.

20 Slide the harness pads up to access plastic guide on strap.
21 Hold the plastic guide and pull strap to tighten or loosen.

USING SAFETY HARNESS

22 Insert side strap buckle into harness buckle on both sides.
23 Insert connected harness and side strap buckles into the sides of the crotch buckle.
24 Press button on crotch buckle to release.

RECLINE THE SEAT

25 Pinch the clamp behind the seat, and slide it down to desired recline.
26 Pull seat down on both sides to match the clamp position. Reverse steps to return to the upright position.

WARNING: When making adjustments to the stoller seat, make sure child's head, arms, and legs are clear of moving seat parts and stroller frame.

27 For extra ventilation, roll up the seat back flap and secure with elastic and button.

LEG SUPPORT

28 To use the leg support, lift the front of the seat pad.
29 Rotate the support arm out and lower the seat pad. Lock the support arm.
30 To lower leg support, reverse the steps.

FOLDING

• Remove your child from the seat.
  • Disengage front wheel swivel locks.
• Remove all attachments and all items from basket.

WARNING: To prevent injury, remove child tray or belly bar accessory when folding or unfolding the stroller.

31 Press buttons on both sides of frame. Rotate handle up.
32 Pull up on the "Pull to Fold" folding handle and let the frame collapse.
33 Make sure the auto-lock lever clicks into place.
34 Place stroller upright in standing position.

BASKET REMOVAL

35 From the front of the stroller, unsnap the 2 snaps and pull the straps out of the foot well.
36 Lift basket off the hook.
37 From the back, lift the top of the basket off the tab on both sides of the frame.
38 Unsnap the strap from the D ring on both sides of the frame.

REMOVING THE SEAT FABRIC

39 Flip the stroller over to expose the seat bottom.

A Unfasten the 2 fastening strips and pull them out of the stroller frame.
B Unfasten the fastening strip and pull them out of the sides of the stroller frame.
C Unscrew both carabiner hooks and remove them from the stroller frame.
40 From beneath the stroller, unsnap tether strap on the side.
41 Flip the seat back over on its wheels. Unsnap both upper snaps from the stroller frame.
42 Starting from the bottom, slide the seat pad out from the stroller frame on both sides.
43 From the top, slide the seat pad out of the frame on both sides.
44 Remove seat fabric.

Reverse the steps to reattach the seat pad to the frame.

CARE AND MAINTENANCE

To preserve the longevity of your stroller, it is important to perform simple, regular maintenance. From time to time, make sure that the joints and folding areas are still in good condition. If you hear any squeaking or feel tension, you can take your stroller to an authorized dealer for added lubrication. All repairs should only be carried out by an authorized dealer.

DO NOT use alcohol based disinfectants to clean this product.

CLEANING

Fabric

• Refer to your care tag on the seat pad for washing instructions

- Wipe clean using a damp cloth.

- Hand wash in cold water with mild soap.

- Machine wash separate in cold water, delicate cycle.

- Do not bleach.

- Do not tumble dry.

- Donotiron.

- Do not dry clean

• Fabric should be attached to frame to dry.
• Be sure to remove the metal frame and PE boads from the seat before washing.
  • DO NOT use solvents, caustic or abrasive cleaning materials.

Plastic/Metal Parts

• Wipe clean using a mild soap and warm water.
• The wheels will need to be dried completely with a soft towel or cloth.
• DO NOT remove, dismantle or alter any part of the seat folding mechanism or brakes.

Leatherette Care

- Wipe clean using a mild soap and warm water.

STORING

• Sunshine can fade seat fabric and dry out tires, so storing your stroller indoors will prolong its good looks.
• DONOT store outside.
• Ensure that the stroller is dry before storing for prolonged periods.
  • Always store the stroller in a dry environment.
• Store the stroller in a safe place when not in use (i.e. where children cannot play with it).
  • DO NOT place heavy objects on top of the stroller.
  • DO NOT store the stroller near a direct heat source such as a radiator or fire.

Baby Jogger's Limited Lifetime Warranty:

Baby Jogger warrants that the frame is free of manufacturer defects for the lifetime of the product. Manufacturer's defects include but are not limited to the breaking of welds and frame tube damage. Textile or soft side materials and all other components shall be warranted for one year from the date of purchase (except for tubes and tires). Proof of purchase is required to make a warranty claim and the warranty is only extended to the original purchaser.

THIS WARRANTY DOES NOT COVER:

• Normal wear and tear
- Corrosion or rust
- Incorrect assembly, or the installation of third party parts or accessories not compatible with the original design
- Accidental or intentional damage, abuse or neglect, or use on stairs or escalators.
- Commercial use
- Improper storage/care of the unit

This warranty specifically excludes claims for indirect, incidental, or consequential damages. The implied warranties of merchantability and fitness for a particular purpose is according to the specific warranty period for this model unit at time of purchase. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. To know what your legal rights are in your state, consult your local or state consumer affairs office or your State's Attorney General.

If your stroller was purchased outside of the United States, please contact the distributor in the country nearest you. Their contact information can be found on our website at http://www.babyjogger.com. Claims for warranty outside of the country in which the product was purchased may incur shipping charges.

Mechanical assembly diagram showing a wheel and bracket with a red arrow indicating motion direction (no text or symbols)

NOTE: When contacting Baby Jogger distributor regarding your stroller, please have your stroller's serial number ready. It can be found on the crossbar above the basket.

Customer Care Contact Information:

Call: 1-800-241-1848 8:30am - 5:30pm EST, Mon - Fri.

Mail: Baby Jogger, LLC

4110 Premier Drive

High Point, NC 27265

www.babyjogger.com / www.babyjogger.ca

PLEASE DO NOT CONTACT THE PLACE OF PURCHASE FOR PARTS OR WARRANTY ISSUES

Technical diagram of a stroller with numbered parts and corresponding close-ups of the seat, wheel, and seatbelt components.

1 Manija

Mechanical assembly diagram showing a wheel and bracket with a red arrow indicating motion direction (no text or symbols)

Correo: Baby Jogger, LLC

4110 Premier Drive

High Point, NC 27265

www.babyjogger.com / www.babyjogger.ca

NO CONTACTE EL LUGAR DE COMPRA PARA PIEZAS NI CUESTIONES DE GARANTÍA

1Poignée

Mechanical diagram showing a lever mechanism with a red arrow indicating motion direction (no text or symbols present)

High Point, NC 27265

www.babyjogger.com / www.babyjogger.ca

VEUILLEZ NE PAS COMMUNIQUER AVEC LE DÉTAILLANT POUR OBTENIR DES PIÈCES OU DU SERVICE EN VERTU DE LA GARANTIE

NOTES/NOTAS:

To register your Baby Jogger product from within the U.S.A. visit us online at www.babyjogger.com or return registration card provided with your product. In Canada, visit www.babyjogger.com to register your product.