KSBC1B0BM - Blender KITCHENAID - Free user manual and instructions

USER MANUAL KSBC1B0BM KITCHENAID

Exterior view of a kitchen aid blender with control knobs and a black handle (no text or symbols on the device itself)

PARTS AND FEATURES

Technical diagram of a blender with numbered parts and labeled parts in English and Chinese

1 On/Off Switch (not shown)
2 Base
3 Cord Cleat (not shown)
4 Power Cord Socket and Removable Power Cord (not shown)
5 Talon Blade
6 Blender Jar
7 Lid

8 Ingredient Cap with Measuring Cup
9 Open Handle for Easy Stackability
10 Removable Blender Jar Pad
11 Control Dial
12 Pulse Toggle Switch
13 Start/Stop Toggle Switch
14 Status Indicator Light
15 Flex Edge Tamper

PRODUCT SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:

DANGER

You can be killed or seriously injured if you don't immediately follow instructions.

WARNING

You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

1. Read all instructions.
2. To protect against risk of electrical shock, do not put Blender in water or other liquid.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
4. Turn the appliance off (O), then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the Power Cord.
5. Avoid contact with moving parts.
6. Do not operate the Blender with a damaged cord or plug or after appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest Authorized Service Center for examination, repair, or electrical or mechanical adjustment. If the supply cord or plug is damaged, it must be replaced by a special cord or assembly available from the manufacturer or service agent.
7. Do not use outdoors.
8. Do not place on or near a hot gas or electric burner, or in a heated oven.
9. Do not let cord hang over edge of table or counter, or touch hot surfaces.

PRODUCT SAFETY

1. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the Blender. A spatula or scraper other than the provided Flex Edge tamper may be used, but must be used only when the Blender is not running.
2. Blades are sharp. Handle carefully.
3. The use of attachments, including canning blender jars, not recommended by KitchenAid may cause a risk of injury to persons.
4. Do not use appliance for other than intended use.
5. Always operate Blender with cover in place.
6. When blending hot liquids or ingredients or operating in the heating mode, Lid Center Cap should remain in place over the Lid opening. Always start on lowest speed and slowly ramp to desired speed when blending hot liquids or ingredients.
7. Allow the appliance to cool completely before putting on or taking off parts, and before cleaning the appliance.

SAVE THESE INSTRUCTIONS

This product is designed for commercial use.

ELECTRICAL REQUIREMENTS

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Voltage: 120 V\~

Frequency: 60 Hz

Amps: 15.0 A

NOTE: If the plug does not fit in the outlet, contact a qualified electrician. Do not modify the plug in any way. Do not use an adapter.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance.

PRODUCT USAGE

BLENDER FUNCTION GUIDE

The Blender has a preset recipe program: Icy Drinks. It also features Variable Times and Pulse functions that allow you to customize your blending for any recipe you make.

SETTING DESCRIPTION		BLENDING TIME (in min:sec)
ICY DRINKS	Gradually ramp up to full power to completely blend hard foods such as ice, whole fruits or vegetables, or frozen fruits. This cycle is recommended for such drinks as Margaritas, Daiquiris, and blended ice coffee drinks.	0:22
LOW	When Low speed is selected, the Blender will run continuously on low until the Start/stop switch is pressed, or after 6 minutes elapse.	N/A
MEDIUM	When Medium speed is selected, the Blender will run continuously on medium until the Start/stop switch is pressed, or until 6 minutes elapse.	N/A
HIGH	When High speed is selected the Blender will run continuously on high until the Start/stop switch is pressed, or after 6 minutes elapse.	N/A
PULSE H/L	Alternatively, use Pulse during manual operation to add a boost of power momentarily.	N/A
VARIABLE TIMES	The timer function starts at a slow speed and ramps up to a high speed for optimal blending results.	0:05-0:60

To clean the Blender: Quick pulses of power and high speeds work to clean the Blender Jar with just 2 cups of water and a drop of dish soap.

PRODUCT USAGE

PREPARING THE COMMERCIAL BLENDER FOR USE

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before first use

Before using your Blender for the first time, wipe the blender base with a warm damp cloth, then wipe clean with a damp cloth. Dry with a soft cloth. Wash the Blender Jar, Lid, and ingredient cup in warm, sudsy water (see "Care and Cleaning" section). Rinse parts and wipe dry.

Illustration of a blender with two kitchen stoves connected to a power outlet (no text or symbols)

Before using the Blender, be sure the countertop beneath the Blender and surrounding areas are dry and clean. Be sure the power switch on the back of the blender base is in the OFF (O) position and the cord is also fully plugged into the back of the Blender. Then, plug the Blender into a grounded 3 prong outlet.

Line drawing showing a hand pressing a button on a kitchen grater, with no text or symbols present.

The main power switch is on the back of the Blender Base. Flip the POWER switch to the ON (I) position. The Status Indicator Light above the Start toggle button will begin to flash, indicating that the Blender is in Standby mode. The Blender is now ready to operate.

NOTE: The Cord Cleat is not to be used as a handle; the Cord Cleat is designed to wrap the Power Cord around it for storage only.

PRODUCT USAGE

ASSEMBLING AND RUNNING THE COMMERCIAL BLENDER

Line drawing of a blender being poured into it, with hands pouring liquid from a container (no text or symbols)

Put the items to blend into the Blender Jar. Add liquids first, then soft foods, then leafy greens, and ice or frozen items last.

Diagram showing two mechanical components with downward arrows indicating motion, no text or symbols present

Make sure that the Lid is fully secured on the Blender Jar; next, place the Blender Jar on the base, making sure that it is fully aligned on the jar pad.

NOTE: Do not fill Blender Jar past the top-most measurement mark, especially when blending liquids.

Line drawing of a kitchen appliance with a hand adjusting a button (no text or symbols)

Flip the START/STOP toggle switch up or down to begin operation of the Blender. The Status Indicator Light will now be solid.

Line drawing of a kitchen blender with a hand operating the button (no text or symbols)

Turn the Control Dial to your desired speed, time, or program. See the "Blender Function Guide" for more information.

NOTE: If you select a pre-programmed cycle, you will need to flip the START/STOP toggle to begin operation.

PRODUCT USAGE

5

Line drawing of a hand pressing a lid into a blender with a measuring scale (no text or symbols)

Utilize the Flex Edge tamper accessory as needed for optimal blending performance. Remove the Ingredient-measuring Cap only, and leave the Lid in place. Stir or press contents down towards the blade. When you are finished, replace the ingredient-measuring cap in the Blender Jar Lid before resuming blending.

Illustration of hands using a tool to adjust or install a device, showing two different states (no text or symbols present)

If desired, use the Pulse function for a momentary boost of speed while blending on the variable speed settings.

PRESS AND HOLD the PULSE toggle switch up for a faster pulse, or down for a slower pulse.

NOTE: The Pulse function may also be used on its own as a separate blending function while the Blender is in Standby mode.

7

Diagram showing a hand pressing a button on a kitchen appliance with directional arrows indicating motion or movement.

After blending, flip the START/STOP toggle switch up or down. Allow the Blender to come to a complete stop before removing the Lid and pouring your blended ingredients.

8

Switching, Adjust

If the Blender remains in standby mode for 10 minutes with no activity, the Blender will enter sleep mode. To get out of sleep mode, press the START/STOP switch once to bring into standby mode. Then, press START/STOP once more to start the Blender.

CARE AND CLEANING

CLEANING THE BLENDER AND ACCESSORIES

IMPORTANT: Allow the appliance to cool completely before putting on or taking off parts, and before cleaning the appliance.

NOTE: To avoid damaging the Blender, do not immerse the blender base or cord in water. To avoid scratching the Blender, do not use abrasive cleansers or scouring pads.

Illustration of a hand inserting a power outlet into a blender (no text or symbols present)

To clean the Blender Base and cord: Unplug the Blender before cleaning. Wipe the base and the cord with a warm, damp cloth; wipe clean with a damp cloth, and dry with a soft cloth.

Illustration of a kitchen sink with a blender and a measuring cup pouring liquid (no text or symbols)

Make sure to clean the Blender Jar, Lid, and Ingredient Cap after each use. Remove any remaining contents from the Blender Jar. Fill the Blender Jar with 2 cups of warm water and 1 drop of liquid detergent. Place the Lid on the Blender Jar, and make sure the Blender Jar is fully in place on the blender base.

3 Write New

Rotate the Control Dial to 30 seconds. Flip the START/STOP toggle switch up or down. When the timer finishes, pour out the soapy water, and rinse the Blender Jar with warm water.

Line drawing of a kitchen sink with cleaning tools and debris (no text or symbols)

Wash the Blender Jar, Jar Pad, Lid, Flex Edge Tamper, and Ingredient Cap by hand with a damp cloth and warm soapy water; rinse with warm water, and dry with a soft cloth.

CARE AND CLEANING

SANITIZING THE BLENDER

1. Remove any remaining contents from the Blender Jar.
2. Prepare a 200 ppm sodium hypochlorite solution* using 1.75 L of hot water in the Blender Jar. Place the Lid on the Blender Jar, and make sure the Blender Jar is fully in place on the Blender Base.
3. Run the Blender on the High Speed setting for 35 seconds. Flip the START/STOP toggle switch up or down to start the Blender.
4. Turn off the Blender and let the sanitizing mix sit in the Blender Jar for an additional 2 minutes.
5. Pour out the sanitizing solution mix. Do not rinse the Blender Jar.
6. Place the Lid on the Blender Jar. Make sure the empty Blender Jar is fully in place on the blender base. Run the empty Blender for an additional 10 seconds. Do not rinse the jar after sanitizing.
7. Allow the Blender Jar to air dry.

*To prepare a 200 ppm sodium hypochlorite solution: use 6.67 ml household bleach (with a 5.25% sodium hypochlorite concentration) in 1.75 L of hot water.

TROUBLESHOOTING

Black-and-white illustration of a hand with a lightning bolt and plug, symbolizing electrical hazard (no text or symbols present)

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

PROBLEM SOLUTION
When the Blender is plugged in and the main power On/Off (I/O) toggle switch is on (I), the Blender will go to Standby mode (flashing white indicator light). However, after 10 minutes of no activity the Blender will go into Sleep mode and the indicator light will turn off:	To wake up the Blender simply flip the START/STOP toggle switch up or down. This will put the Blender back into Standby mode.
If the Status Indicator Light flashes an orange color, the Blender is in error mode. This can be caused by: using a spatula or any other utensil that could obstruct the blade to freely spin in the Blender Jar, or having an ice cube or hard food in a location that locks up the blade:	Correct the problem by turning off the Blender using the dedicated On/Off Toggle Switch in the back, or by unplugging the Blender.Remove the Blender Jar from the base, and clear the items. Place the Blender back on the base, and then turn the Blender back on to continue regular use.

10

TROUBLESHOOTING

PROBLEM SOLUTION
If the Blender stops while blending:	After 6 minutes of run time, the Blender will automatically shut off and go into Sleep mode, and the LED light will turn off. You can wake the Blender back up using the toggle switches (START/STOP or Pulse High/Pulse Low). If the Blender stops in less than 6 minutes, it is possible there is an internal error with the Blender. Contact an authorized service center for assistance.
If the ingredients of a recipe aren't blending:	There may be times when an air pocket is created around the blade causing the ingredients to miss the blending blade. Stop the Blender, remove the Blender Jar from the base, and use a spatula to rearrange ingredients in the Blender Jar. For certain recipes, try adding more liquid.
If you experience an overflow from the Blender Jar:	Disconnect the Blender from the power source. Remove the jar pad from the housing to make sure the base is fully dry. The Control Dial can be detached by pulling it off with force. Wipe dry, and then replace. To avoid damage to the graphics when cleaning, don't apply too much force or use abrasive cleansers or scouring pads.
If the problem cannot be corrected:	See the “Warranty and Service” section. Do not return the Blender to the retailer; retailers do not provide service.

WARRANTY AND SERVICE

KITCHENAID COMMERCIAL BLENDER WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF COLUMBIA, AND CANADA

This warranty extends to the purchaser and any succeeding owner for Commercial Blenders operated in the 50 United States, the District of Columbia, and Canada.

Length of Warranty: Three Year Full Warranty for Blender Base and One Year Full Warranty for Blender Jar from date of purchase.
KitchenAid Will Pay for Your Choice of:	Hassle-Free Replacement of your Commercial Blender.See the next page for details on how to arrange for service, or call the Customer eXperience Center toll-free at 1-855-845-9684.ORThe replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.See the KitchenAid Commercial Blender Warranty for Puerto Rico for details on how to arrange for service.
KitchenAid Will Not Pay for:	A. Damage resulting from accident, alteration, misuse or abuse.B. Replacement parts or repair labor costs for Blender operated outside the 50 United States and District of Columbia.C. Replacement of the jar or base unit due to cosmetic issues.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIESIMPLIED WARRANTIES, INCLUDING TO THE EXTENT APPLICABLE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED TO THE EXTENT LEGALLY PERMISSIBLE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO ONE YEAR, OR THE SHORTEST PERIOD ALLOWED BY LAW. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS OR EXCLUSIONS ON HOW LONG AN IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.IF THIS PRODUCT FAILS TO WORK AS WARRANTED, CUSTOMER'S SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT ACCORDING TO THE TERMS OF THIS LIMITED WARRANTY. KITCHENAID AND KITCHENAID CANADA DO NOT ASSUME ANY RESPONSIBILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

WARRANTY AND SERVICE

KITCHENAID COMMERCIAL BLENDER BASE WARRANTY FOR PUERTO RICO

A limited three year warranty extends to the purchaser and any succeeding owner for Commercial Blender Bases operated in Puerto Rico. During the warranty period, all service must be handled by an Authorized KitchenAid Service Center. Please bring the Commercial Blender Base, or ship

it prepaid and insured, to the nearest Authorized Service Center. Call toll-free 1-855-845-9684 to learn the location of a Service Center near you. Your repaired Commercial Blender Base will be returned to you prepaid and insured.

HASSLE-FREE REPLACEMENT WARRANTY — 50 UNITED STATES AND DISTRICT OF COLUMBIA

We're so confident the quality of our products meets the exacting standards of KitchenAid that, if your Commercial Blender Base should fail within the first three years of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Commercial Blender Base returned to us. Your replacement unit will also be covered by our three year limited warranty. Please follow these instructions to receive this quality service.

If your Commercial Blender Base should fail within the first three years of ownership, simply call our toll-free Customer eXperience Center at 1-855-845-9684 Monday through Friday, 8 a.m. to 8 p.m. (Eastern Time). Give the consultant your complete shipping address. (No P.O. Box numbers, please.)

When you receive your replacement Commercial Blender Base, use the carton and packing materials to pack up your original Commercial Blender Base.

HASSLE-FREE REPLACEMENT WARRANTY — CANADA

We're so confident the quality of our products meets the exacting standards of the KitchenAid brand that, if your Commercial Blender Base should fail within the first three years of ownership, KitchenAid Canada will replace your Commercial Blender Base with an identical or comparable replacement. Your replacement unit will also be covered by our three year limited warranty. Please follow these instructions to receive this quality service.

If your Commercial Blender Base should fail within the first three years of ownership, take the Commercial Blender Base or

ship collect to an Authorized KitchenAid Service Centre. In the carton include your name and complete shipping address along with a copy of the proof of purchase (register receipt, credit card slip, etc.). Your replacement Commercial Blender Base will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner call our toll-free Customer eXperience Centre at 1-800-807-6777.

Or write to us at: Customer eXperience Centre KitchenAid Canada 200 - 6750 Century Ave. Mississauga, ON L5N 0B7

WARRANTY AND SERVICE

KITCHENAID COMMERCIAL BLENDER JAR WARRANTY FOR PUERTO RICO

A limited one year warranty extends to the purchaser and any succeeding owner for Commercial Blender Jars operated in Puerto Rico. During the warranty period, all service must be handled by an Authorized KitchenAid Service Center. Please bring the Commercial Blender

Jar, or ship it prepaid and insured, to the nearest Authorized Service Center. Call toll-free 1-855-845-9684 to learn the location of a Service Center near you. Your repaired Commercial Blender Jar will be returned to you prepaid and insured.

HASSLE-FREE REPLACEMENT WARRANTY — 50 UNITED STATES AND DISTRICT OF COLUMBIA

We're so confident the quality of our products meets the exacting standards of KitchenAid that, if your Commercial Blender Jar should fail within the first one year of ownership, KitchenAid will arrange to deliver an identical or comparable replacement to your door free of charge and arrange to have your original Commercial Blender Jar returned to us. Your replacement unit will also be covered by our one year limited warranty. Please follow these instructions to receive this quality service.

If your Commercial Blender Jar should fail within the first one year of ownership, simply call our toll-free Customer eXperience Center at 1-855-845-9684

Monday through Friday, 8 a.m. to 8 p.m. (Eastern Time). Give the consultant your complete shipping address. (No P.O. Box numbers, please.)

When you receive your replacement Commercial Blender Jar, use the carton and packing materials to pack up your original Commercial Blender Jar.

HASSLE-FREE REPLACEMENT WARRANTY - CANADA

We're so confident the quality of our products meets the exacting standards of the KitchenAid brand that, if your Commercial Blender Jar should fail within the first one year of ownership, KitchenAid Canada will replace your Commercial Blender Jar with an identical or comparable replacement. Your replacement unit will also be covered by our one year limited warranty. Please follow these instructions to receive this quality service.

If your Commercial Blender Jar should fail within the first one year of ownership, take the Commercial Blender Jar or ship

collect to an Authorized KitchenAid Service Centre. In the carton include your name and complete shipping address along with a copy of the proof of purchase (register receipt, credit card slip, etc.). Your replacement Commercial Blender Jar will be returned prepaid and insured. If you are unable to obtain satisfactory service in this manner call our toll-free Customer eXperience Centre at 1-800-807-6777.

Or write to us at: Customer eXperience Centre KitchenAid Canada 200 - 6750 Century Ave. Mississauga, ON L5N 0B7

WARRANTY INFORMATION — MEXICO AND LATIN AMERICA

For Mexico and Latin America: For more information about your warranty, visit www.kitchenaid-latam.com

WARRANTY AND SERVICE

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES, OR ORDERING ACCESSORIES AND REPLACEMENT PARTS

In the United States and Puerto Rico:

For service information, or to order accessories or replacement parts, call toll-free at 1-855-845-9684 or write to: Customer eXperience Center, KitchenAid Small Appliances, P.O. Box 218, St. Joseph, MI 49085-0218

Outside the United States and Puerto Rico:

Consult your local KitchenAid dealer or the store where you purchased the Commercial Blender for information on how to obtain service.

For service information in Canada:

Call toll-free 1-800-807-6777.

Or write to:

Customer eXperience Centre

KitchenAid Canada

200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

PIÈCES ET CARACTÉRISTIQUES

Technical diagram of a blender with numbered parts and labeled parts in English and Chinese

Line drawing of a blender with two connected outlets, no text or symbols present

Line drawing showing a hand pressing a button on a kitchen grater, with no text or symbols present.

Illustration of a blender being poured into a container with a lid, showing food and beverage (no text or symbols)

Diagram showing two steps of a blender with liquid and lid, no text or symbols present

Line drawing of a hand pressing down on a kitchen appliance with an arrow indicating the process (no text or symbols present)

Line drawing of a kitchen blender with a hand adjusting the control knob (no text or symbols)

Illustration of a hand using a measuring cup to press or lift a container filled with liquid, with no visible text or symbols.

Line drawing of a hand holding a small device with an arrow indicating rotation (no text or symbols)

Switch, Assist

Illustration of a power adapter installing or adjusting an electrical socket into a wall (no text or symbols present)

Illustration of a kitchen sink with a blender and a measuring cup pouring liquid (no text or symbols)

Line drawing of a kitchen sink with cleaning tools and debris (no text or symbols)

Customer eXperience Center, KitchenAid Small Appliances, P.O. Box 218, St. Joseph, MI 49085-0218

Customer eXperience Centre

KitchenAid Canada

200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

Line drawing of two kitchen appliances connected by a power outlet, no text or symbols present

Line drawing showing a hand pressing a button on a kitchen grater, with no text or symbols present.

Line drawing of a blender being poured into it, with no text or symbols present

Line drawing of a kitchen blender with a hand operating the button (no text or symbols)

Illustration of a hand pressing a lid into a blender with liquid, showing a small container filled with water and a plant (no text or symbols)

Line drawing of a hand pressing down on a kitchen grater with an arrow indicating press direction (no text or symbols)

Switching/Adaptive

Illustration of hands using a power adapter to install two outlets into a shared outlet (no text or symbols present)

Illustration of a kitchen sink with a blender and measuring cup, showing liquid being poured into it (no text or symbols)

Line drawing of a kitchen sink with laundry and tools, no text or symbols present

Customer eXperience Center, KitchenAid Small Appliances, P.O. Box 218, St. Joseph, MI 49085-0218.

Customer eXperience Centre

KitchenAid Canada

200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

Two horizontal color bar segments with grayscale shades and a central crosshair symbol (no text or labels)

NOTES

DISCOVER MORE. DÉCOUVREZ PLUS. DESCUBRA MÁS.

KITCHENAID.COM/QUICKSTART

Red background with a white telephone handset icon (no text or symbols)

PRODUCT QUESTIONS OR RETURNS

QUESTIONS SUR LE PRODUIT OU LES RETOURS

MEXICO: KitchenAid.com.mx

LATIN AMERICA: KitchenAid-Latam.com

Silhouette of a kitchen mixer and bowl (no text or symbols)

KitchenAid®

®/TM ©2022 KitchenAid. All rights reserved. Used under license in Canada.