BVL152 - Lighting Dörr - Free user manual and instructions

USER MANUAL BVL152 Dörr

10.3 ROHS KONFORMITÄT

THANK YOU for choosing this DÖRR quality product. Please read the instruction manual and safety hints carefully before first use. Keep this instruction manual together with the device for future use. If other people use this device, make this instruction manual available. This instruction manual is part of the device and must be supplied with the device in case of sale. DÖRR is not liable for damages caused by improper use or the failure to observe the instruction manual and safety hints. 01 | SAFETY HINTS

Do not look directly into the LED and do not direct the light beam into the eyes of humans or animals. CAUTION: Looking into the light for an extended period of time may cause an irreversible damage to the retina.

Only for the illumination for photographic purposes. Not suited for permanent room lightning.

During the operation the aluminium housing and the LEDs will warm up.

Protect the device from rain, moisture, direct sunlight and extreme temperatures.

Never leave the light unattended while charging the battery. After charging, dis- connect the light from power supply.

Turn off the device after use.

Do not submerge or throw the light into water.

Do not throw the light into fire – risk of explosion!

If device is not in use for a long period of time, we recommend to charge the battery to about 75%. The storage of an empty or fully charged battery will shorten its life.

The built-in battery and the LEDs cannot be replaced.

Do not operate or touch the device with wet hands.

Protect the device against impacts. Do not use the device if it has been dropped. In this case a qualified electrician should inspect the device before you use it again.

Do not attempt to repair the device by yourself. Risk of electric shock! When service or repair is required, contact qualified service personnel.

People with physical or cognitive disabilities should use the device with super- vision.

People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum distance of 30 cm, as the device generates magnetic fields.

Do not use the device nearby mobile phones and devices that generate strong electromagnetic fields.

This device is not a toy. To prevent accidents and suffocation keep the device, the accessories and the packing materials away from children and pets.

Protect the device against dirt. Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Before cleaning make sure to switch off the device and take off from power supply!

Store the device in a dust-free, dry and cool place.

If the device is defective or without any further use, dispose of the device according to the Waste Electrical and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.09

07 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recom- mend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Before cleaning make sure to switch o the device and take o from power supply! Store the device in a dust-free, dry and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets. 08 | TECHNICAL SPECIFICATIONS 09 | CONTENT 1x SLIM RGB LED video light BVL-152 1x Universal ball head 1x USB-C charging cable 1x Diusor plate white 1x Storage pouch 1x Safety hints BVL-152 Number of LEDs 152 LEDs (40x 6500 K, 40x 3000 K, 72x RGB) LED power max. 12 W Colour temperature 3000 – 6500 K (+/- 300 K) Illumination power approx. 1450 Lux/at 0,5 m 590 Lux/at 1 m Colour Rendering Index (CRI) > 95 R

During operation the housing and LED´s will warm up.

Turn off the device after usage with On/Off switch (3).

Let the device cool down completely, before placing it in the storage pouch. 06 | MOUNTING

06.1 MOUNTING ON A CAMERA/CAMCORDER WITH FLASH HOT SHOE

To mount the RGB light on a camera or camcorder, screw the universal ball head (12) into the ¼" connection thread (1) of the RGB LED video light. Then slide the flash hot shoe adapter (12a) into the hot shoe mount of your camera or camcorder. Tighten the locking screw (12b) downwards.

06.2 MOUNTING ON A TRIPOD

Unscrew the flash hot shoe adapter (12a) from the ball head. You have now the possibility to mount the RGB light on any tripod with ¼" screw thread.

06.3 MOUNTING/DETACHING DIFFUSER PLATE

The diusor plate (11) softens the light and reduces harsh shadows. In order to mount the diusor plate (11) place it on the front side of the RGB light respecting that the 3 holders (11a) match with the 3 housing notches (11b) correctly. Press gently until holders (11a) snap into the notches (11b). Losen the holders (11a) from the notches (11b). Pull o the diusor plate (11).10

10 | DISPOSAL, CE MARKING

10.1 DISPOSAL OF BATTERIES/ACCUMULATORS

Batteries are marked with the symbol of a crossed out bin. This symbol indi- cates that empty batteries or accumulators which can no longer be charged should not be disposed of with household waste. Waste batteries may contain harmful substances that can cause damage to health and to the environment. Please use the return and collection systems available in your country for the disposal of the waste batteries.

10.2 WEEE INFORMATION

The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is the European community directive on waste electrical and electronic equip- ment, which became European law in February 2003. The main purpose of this directive is to prevent electronic waste. Recycling and other forms of waste recovery should be encouraged to reduce waste. The symbol (trash can) on the product and on the packing means that used electrical and elec- tronic products should not be disposed of with general household waste. It is your responsibility to dispose of all your electronic or electrical waste at designated collection points. Disposing of this product correctly will help to save valuable resources and it is a significant contribution to protect our environment as well as human health. For more information about the cor- rect disposal of electrical and electronic equipment, recycling and collection points please contact your local authorities, waste management companies, your retailer or the manufacturer of this device.

10.3 ROHS CONFORMITY

This product is compliant with the European RoHS directive for the restriction of use of certain hazardous substances in electrical and electronic equipment and its amendments.

The CE marking complies with the European standards and indicates that the product meets the requirements of the applicable EU directives.11

10.3 CONFORMITÀ A ROHS