Paraline PSA1S - Speaker YORKVILLE - Free user manual and instructions

USER MANUAL Paraline PSA1S YORKVILLE

World map composed of black dots representing data points, with some dots marked as '0' or '1'.

WEB: www.yorkville.com

WORLD HEADQUARTERS

CANADA

Yorkville Sound Limited

550 Granite Court

Pickering, Ontario

L1W 3Y8 CANADA

Voice: 905-837-8481

Fax: [phone]

U.S.A.

Yorkville Sound Inc.

4625 Witmer Industrial Estate

Niagara Falls, New York

14305, USA

Voice: 716-297-2920

Fax: [phone]

Quality and Innovation Since 1963

Printed in Canada

SERVICE MANUAL

PSA 1S

REV1+REV2

SMT Disclaimer

Due to the complex nature of the use of SMT installed components in Yorkville equipment, we highly caution all service technicians in attempting to repair or replace SMT factory installed components.

Many of these components may be glued prior to initial soldering

Replacing SMT components requires expensive

specialized de-soldering equipment and training.

Yorkville Sound will repair and replace defective SMT components to ensure proper quality assurance and installation is maintained.

IMPORTANT SAFETY INSTRUCTIONS

This lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The DO NOT STACK symbol is inlanded to alert the user that the product shall not be vertically slacked because of the nature of the product.

The excitation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Instructions pertaining to a risk of fire, electric shock, or injury to a person

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS DEVICE IS FOR INDOOR USE ONLY! INSTALLED BATTERY PACKS SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE, FIRE OR THE LIKE.

Read Instructions: The Owner's Manual should be read and understood before operation of your unit. Please, save these instructions for future reference and head all warnings.

Cleaning: Clean only with dry cloth.

Packaging: Keep the box and packaging materials, in case the unit needs to be returned for service.

Warning: To reduce the risk or fire or electric shock, do not expose this apparatus to rain or moisture. Do not use this apparatus near water!

Warning: When using electric products, basic precautions should always be followed, including the following:

Power Sources

Your unit should be connected to a power source only of the voltage specified in the owners manual or as marked on the unit. This unit has a polarized plug. Do not use with an extension cord or receptacle unless the plug can be fully inserted. Precautions should be taken so that the grounding scheme on the unit is not defeated. An apparatus with CLASS I construction shall be connected to a Mains socket outlet with a protective earthing connection. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Hazards

Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fail, causing serious personal injury and serious damage to the product. Use only with cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with the product. Follow the manufacturer's instructions when installing the product and use mounting accessories recommended by the manufacturer. Only use attachments/abs Accessories specified by the manufacturer.

Equipment that is suspended overhead must use a secondary safeguard to prevent personal injury in the event the primary mounting mechanism fails. Safety eyebolts attached to the equipment and galvanized steel wire can be used together to implement a fallsafe mounting thus ensuring the safety of the equipment and anyone positioned below the equipment.

Improper installation can result in bodily injury or death. If you are not qualified to attempt the installation get help from a professional structural rigger. Notes: Prolonged use of headphones at a high volume may cause health damage to your ears.

The apparatus should not be exposed to dripping or splashing water; no objects filled with liquids should be placed on the apparatus.

Terminals marked with the "lightning bolt" are hazardous live; the external wiring connected to these terminals require installation by an instructed person or the use of ready made leads or cords.

Ensure that proper ventilation is provided around the appliance. Do not install near any heat sources such as radiators, heat registers, sloves, or other apparatus (including amplifiers) that produce heat.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

Power Cord

Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blades or the third prong are provided for your safety. If the provided plug does not fill into your outlet, consult an electrician for replacement of the obsolete outlet. The AC supply cord should be routed so that it is unlikely that it will be damaged. Protect the power cord from being walked on or pinched particularly at plugs. If the AC supply cord is damaged DO NOT OPERATE THE UNIT. To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from the AC receptacle. The mains plug of the power supply cord shall remain readily operable.

Unplug this apparatus during lightning storms or when unused for long periods of time.

Service

The unit should be serviced only by qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, requires battery pack replacement or has been dropped. Disconnect power before servicing!

IMPORTANT SAFETY INSTRUCTIONS

The Lightning Flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product

1. Read these instructions.

2. Keep these instructions.

3. Head all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prongs are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Prolect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from lip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING:

• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.

• To completely disconnect this apparatus from the ac mains, disconnect the power supply cord plug from the ac receptacle.

- The mains plug of the power supply cord or appliance coupler shall remain readily accessible.

Active or Passive Active

Program Power (watts) 1400 Watts Program (2800 Watts Peak)

Max SPL (dB) 135dB Peak (129dB Continuous)

Frequency Response (Hz +/- 3db) 37Hz-100Hz

Crossover Frequency (Hz) fixed @ 100Hz

Driver Configuration 2x12-inch (Bass Reflex Cabinet)

LF Driver(s) 2x12-inch Ceramic with 3-inch VoiceCoil

LF Impedance (ohms) 2x4 Ohm Load

LF Power Amplifier (watts) Class D

Power Consumption (typ/max) 210VA / 440 VA

Enclosure Materials 15mm Birch

Baffle Material 15mm Birch

Covering / Finish Paint

Dimensions (DWH xbackW, inches) 22.75 x14 x 32

Dimensions (DWH xbackW, cm) 57.8 x 35.6 x 81.3

Weight (lbs/kg) 120 / 54.6

* Specifications subject to change without notice

Spécifications

Block Diagram for PSA1s

DESIGNED & MANUFACTURED BY YORKVILLE SOUND

graph LR
    A["Input Mode Line / Speaker"] --> B["BUFFERS"]
    B --> C["EQLP-EQHPLUMMER"]
    C --> D["Class-D POWER AMP"]
    D --> E["WOOFER"]
    C --> F["Excursion Red"]
    C --> G["Thermal Yellow"]
    C --> H["POWER SUPPLY"]
    H --> I["Ground"]
    J["2● 3● 1●"] --> A
    K["1● 3● 2●"] --> A

REF YS # Description

REF YS #

Description REF YS #

Description

BUT1 863

ROUND PUSH BUTTON 1/4 BLK 24MM*

D29

6825

1N4148 75V 0A45 DIODE T&R

R58

6123

1/4W 20K0 1%MINI MF T&R RES

C1

5416

470P 50V 10%CAP T&R BEAD NPO

D30

6438

1N4007 1000V 1A0 DIODE T&R R59 4777 1/4W 21K5 % T&R RES

C2

5416

470P 50V 10%CAP T&R BEAD NPO

D31

6438

1N4007 1000V 1A0 DIODE T&R R60 4777 1/4W 21K5 % T&R RES

C3

5199

100P 100V 2%CAP T&R RAD CER.2inNPO

F3

2486

1.5 AMP SLO-BLO T&R FUSE

R61

4864

1/4W 2K7 5% T&R RES

C4

5231

220N 63V 10%CAP T&R RAD 2inFLM

F4

2486

1.5 AMP SLO-BLO T&R FUSE

R62

4829

1/4W 10K 5% T&R RES

C5

5229

150N 63V 10%CAP T&R RAD 2inFLM

J2

4135

XLR ML PCB MT VERT 24MM BA SERIES

R63

4836

1/4W 68K 5% T&R RES

C6

5223

39N 100V 10%CAP T&R RAD .2inFLM

J3

4063

1/4 IN ISO JCK PCMT VT STER RT SWT

R64

4830

1/4W 15K 5% T&R RES

C7

5212

100N 63V 5%CAP T&R RAD 2inFLM

J4

4063

1/4 IN ISO JCK PCMT VT STER RT SWT

R66 4599

22AWG SOLID SC WIR T&R JMP

C8

5212

100N 63V 5%CAP T&R RAD 2inFLM

J5

4010

XLR FEML PCB MT VERT 24MM AA SERIES

R68

4599

22AWG SOLID SC WIR T&R JMP

C9

5212

100N 63V 5%CAP T&R RAD .2inFLM

K1

4127

RELAY 1A 10AMP DC12 017MA PC-S R71 4829 1/4W 10K 5% T&R RES

C10

5212

100N 63V 5%CAP T&R RAD .2inFLM

L1

3817

1500UH COIL 15AMP INPUT COM MODE

R72

4829

1/4W 10K 5% T&R RES

C11

5223

39N 100V 10%CAP T&R RAD .2inFLM

L2

3899

18UH HI-Q MINI INDUCTOR T&R

R73

4902

1/4W 24K 5% T&R RES

C12

5212

100N 63V 5%CAP T&R RAD .2inFLM

LD1

6405

RED 3MM LED 2V0 20MA BRT

R74

4803

1/4W 49K9 1% T&R RES

C13

5212

100N 63V 5%CAP T&R RAD .2inFLM

LD2

6408

GRN 3MM LED 1V9 5MA FROSTED

R75

4803

1/4W 49K9 1% T&R RES

C14

5416

470P 50V 10%CAP T&R BEAD NPO

LD3

6400

YEL 3MM LED 1V9 6MA HIGHFEFF

R76

4803

1/4W 49K9 1% T&R RES

C15

5212

100N 63V 5%CAP T&R RAD 2inFLM

P1

4459

10K B LIN 9MM DETHI TORQ P32

R77

4830

1/4W 15K 5% T&R RES

C16

5817

15P 100V 2%CAP T&R RAD CER.2inNPO

Q1

5105

MPSA13 TO92 NPN DARL T&R TA

R78

4830

1/4W 15K 5% T&R RES

C17

5817

15P 100V 2%CAP T&R RAD CER.2inNPO

Q2

5108

2N5401 TO92 PNP TRAN T&R TA

R79

4917

1/4W 31K6 1% T&R RES

C18

5234

470N 63V 10%CAP T&R RAD .2inFLM

Q3

5103

MPSA06 TO92 NPN TRAN T&R TA

R80

4743

1/4W 681R0 0.1% *** T&R RES

C19

5234

470N 63V 10%CAP T&R RAD .2inFLM

Q4

5107

2N5551 TO92 NPN TRAN T&R TA

R81

4743

1/4W 681R0 0.1% *** T&R RES

C20

5260

22U 50V 20%CAP T&R RAD .2inEL

Q5

5107

2N5551 TO92 NPN TRAN T&R TA

R82

6116

1/4W 10K0 1%MINI MF T&R RES

C21

5260

22U 50V 20%CAP T&R RAD .2inEL

Q6

5107

2N5551 TO92 NPN TRAN T&R TA

R83

6116

1/4W 10K0 1%MINI MF T&R RES

C22

5857

4700U 160V 20%CAP RAD 40X63MM 5pin

Q7

5102

BC560C TO92 PNP TRAN T&R TB

R84

6116

1/4W 10K0 1%MINI MF T&R RES

C23

5857

4700U 160V 20%CAP RAD 40X63MM 5pin

R1

4776

1/4W 113K 1% T&R RES

R85

6116

1/4W 10K0 1%MINI MF T&R RES

C24 5857

4700U 160V 20%CAP RAD 40X63MM 5pin

R2

5016

1.0W 9K760 0.5% *** T&R RES

R86

6128

1/4W 4K99 1%MINI MF T&R RES

C25 5857

4700U 160V 20%CAP RAD 40X63MM 5pin

R3

5016

1.0W 9K760 0.5% *** T&R RES

R87

6116

1/4W 10K0 1%MINI MF T&R RES

C26 5262 1U 275V 20%CAP BLK 'X2'26.0MM AC

R4

4776

1/4W 113K 1% T&R RES

R88

6151

1/4W 619R 1%MINI MF T&R RES

C27 5416

470P 50V 10%CAP T&R BEAD NPO

R5

4776

1/4W 113K 1% T&R RES

R89

6116

1/4W 10K0 1%MINI MF T&R RES

C28

6451

4N7 250V 20%CAP BLK "Y" 10MM AC

R6

4762

1/4W 9K760 0.1% *** T&R RES

R90

6116

1/4W 10K0 1%MINI MF T&R RES

C29

5199

100P 100V 2%CAP T&R RAD CER.2inNPO

R7

4762

1/4W 9K760 0.1% *** T&R RES

R91

6151

1/4W 619R 1%MINI MF T&R RES

C30

5212

100N 63V 5%CAP T&R RAD .2inFLM

R8

4784

1/4W 17K40 0.1% *** T&R RES

R92 6151

1/4W 619R 1%MINI MF T&R RES

C31

5212

100N 63V 5%CAP T&R RAD .2inFLM

R9

4784

1/4W 17K40 0.1% *** T&R RES

R93

6151

1/4W 619R 1%MINI MF T&R RES

C32

5212

100N 63V 5%CAP T&R RAD .2inFLM

R10

4827

1/4W 4K7 5% T&R RES

R94 6116

1/4W 10K0 1%MINI MF T&R RES

C33

5212

100N 63V 5%CAP T&R RAD .2inFLM

R11

4841

1/4W 220K 5% T&R RES

R95

4776

1/4W 113K 1% T&R RES

C34

5212

100N 63V 5%CAP T&R RAD .2inFLM

R12

4847

1/4W 2K2 5% T&R RES

R96

6116

1/4W 10K0 1%MINI MF T&R RES

C35

5212

100N 63V 5%CAP T&R RAD .2inFLM

R13

4829

1/4W 10K 5% T&R RES

R97

4962

2.0W 5K1 5% T&R RES

C36

5616

3300U 50V 20%CAP BLK 18X35MM EL

R14

4829

1/4W 10K 5% T&R RES

R98

6543

48R 265V RESETTABLE THERMISTOR PTC

C37

5616

3300U 50V 20%CAP BLK 18X35MM EL

R15

4833

1/4W 27K 5% T&R RES

R99

4962

2.0W 5K1 5% T&R RES

C38

5212

100N 63V 5%CAP T&R RAD .2inFLM

R16

4833

1/4W 27K 5% T&R RES

R100

6489

5R0 20% NTC THERMISTOR-SURGTR

C39

5212

100N 63V 5%CAP T&R RAD .2inFLM

R17

4836

1/4W 68K 5% T&R RES

R101

4819

1/4W 180R 5% T&R RES

C40

5267

100U 25V 20%CAP T&R RAD .2inEL

R18

4902

1/4W 24K 5% T&R RES

R102

4822

1/4W 820R 5% T&R RES

C41

5267

100U 25V 20%CAP T&R RAD .2inEL

R19

4833

1/4W 27K 5% T&R RES

R103

4830

1/4W 15K 5% T&R RES

C42

5267

100U 25V 20%CAP T&R RAD .2inEL

R20

4902

1/4W 24K 5% T&R RES

S1

3522

DPDT MINI PC VERT SNP ALT

C43

5212

100N 63V 5%CAP T&R RAD .2inFLM

R21

4833

1/4W 27K 5% T&R RES

U1 6889

L074CN IC QUAD O/A.T.I ONLY

C44

5212

100N 63V 5%CAP T&R RAD .2inFLM

R22

4836

1/4W 68K 5% T&R RES

U2

6804

MC33079P IC QUAD OP AMP

C45 5212 100N 63V 5%CAP T&R RAD .2inFLM

R23

4821

1/4W 470R 5% T&R RES

U3

6889

TL074CN IC QUAD O/A.T.I ONLY

C46 5212 100N 63V 5%CAP T&R RAD .2inFLM

R24 4822

1/4W 820R 5% T&R RES

U4 6745 L M1360ON IC XCONDUCTANCE AMP

C47 5212 100N 63V 5%CAP T&R RAD .2inFLM

R25

4902

1/4W 24K 5% T&R RES

U5

6804

MC33079P IC QUAD OP AMP

C50

6451

4N7 250V 20%CAP BLK "Y" 10MM AC

R26

4832

1/4W 22K 5% T&R RES

U6

6882

TL072 IC FET DUAL OP AMP

C51

5416

470P 50V 10%CAP T&R BEAD NPO

R27

4839

1/4W 150K 5% T&R RES

U7

6971

MC9508QD2CPC MICROCONTROLLER DIP8

C52

5260

22U 50V 20%CAP T&R RAD .2inEL

R28

4824

1/4W 1K5 5% T&R RES

U8

6882

TL072 IC FET DUAL OP AMP

C53

5267

100U 25V 20%CAP T&R RAD .2inEL

R29

4770

1/4W 249R 1% T&R RES

U9

6872

MC7815CT TO220 P 15V REG V1

D1

6825

1N4148 75V OA45 DIODE T&R

R30

4770

1/4W 249R 1% T&R RES

U10

6871

MC7915CT TO220 N 15V REG V2

D2

6825

1N4148 75V OA45 DIODE T&R

R31

4770

1/4W 249R 1% T&R RES

U11

6738

MC7805CT TO220 P 5V REG V1

D3

6825

1N4148 75V OA45 DIODE T&R

R32

4770

1/4W 249R 1% T&R RES

U12

6736

MC7905CT TO220 N -5V REG V2

D4

6825

1N4148 75V OA45 DIODE T&R

R33

4848

1/4W 62K 5% T&R RES

U13

6882

TL072 IC FET DUAL OP AMP

D5

6825

1N4148 75V OA45 DIODE T&R

R34

4848

1/4W 62K 5% T&R RES

W1

2359

14 CIR HEADERDIL RA 0.1

D6

6772

BRIDGE 25A 400V WIRE LEAD SIP

R35

4853

1/4W 39K 5% T&R RES

W2

2359

14 CIR HEADERDIL RA 0.1

D7

6825

1N4148 75V OA45 DIODE T&R

R36

4853

1/4W 39K 5% T&R RES

W3

4166

06 CIR DUAL ROW HDR HT 0.1

D8 6825 1N4148 75V OA45 DIODE T&R

R37

4839

1/4W 150K 5% T&R RES

W4

2354

2 CIR XH-HEADER RA 2.5mm

D9 6438 1N4007 100V 1A0 DIODE T&R

R38

4839

1/4W 150K 5% T&R RES

W5

4147

6 PIN POWER PIN HEADER

D10

6825

1N4148 75V OA45 DIODE T&R

R39

6116

1/4W 10K0 1%MINI MF T&R RES

W6

3949

GY 18AWG STRANDED GRN BASE YEL STRIPE

D11

6825

1N4148 75V OA45 DIODE T&R

R40

6116

1/4W 10K0 1%MINI MF T&R RES

W7

4162

2 PIN POWER PIN HEADER

D12

6825

1N4148 75V OA45 DIODE T&R

R41

6123

1/4W 20K0 1%MINI MF T&R RES

W8

4162

2 PIN POWER PIN HEADER

D13

6825

1N4148 75V OA45 DIODE T&R

R42

6116

1/4W 10K0 1%MINI MF T&R RES

W9

4146

3 PIN POWER PIN HEADER

D14

6825

1N4148 75V OA45 DIODE T&R

R43

4588

1/4W 2K43 1% T&R RES

W10

156 Mounting Hole

D15 6825 1N4148 75V OA45 DIODE T&R

R44

5001

1/4W 6K04 1% T&R RES

W11

4067

9 CIR VERT PC MNT HDR .156

D16 6438 1N4007 100V 1A0 DIODE T&R

R45

4841

1/4W 220K 5% T&R RES

W12

156 Mounting Hole

D17

6825

1N4148 75V OA45 DIODE T&R

R46

4843

1/4W 470K 5% T&R RES

W15

4056

2 CIR XH-HEADER 0.098IN

D18

6825

1N4148 75V OA45 DIODE T&R

R47

4864

1/4W

M1450-02 Parts Reference List 3/14/2022

REF YS # Description REF YS #

Description

REF

YS #

Description

REF

YS #

Description

REF

YS # Description

M-156

W1469.88 PSA#

INTERFACE BOARD

M15

12N 50N

10%CAP 3806 SMT XTR

C16

12N 50N

10%CAP 3806 SMT XTR

C2

12N 50N

10%CAP 3806 SMT XTR

B1

E53D

200V 3A0 D214 SWT SMIC

B2

E53D

200V 3A0 D214 SWT SMIC

B3

E53D

200V 3A0 D214 SWT SMIC

B4

E53D

200V 3A0 D214 SWT SMIC

B5

E53D

200V 3A0 D214 SWT SMIC

B6

E53D

200V 3A0 D214 SWT SMIC

B7

E53D

200V 3A0 D214 SWT SMIC

B8

E53D

200V 3A0 D214 SWT SMIC

B9

E53D

200V 3A0 D214 SWT SMIC

B10

2342 PAX30ML NYLON STANDOFF NUT BLK

B11

2342 PAX30ML NYLON STANDOFF NUT BLK

B12

2342 PAX30ML NYLON STANDOFF NUT BLK

B13

2342 PAX30ML NYLON STANDOFF NUT BLK

B14

V1585R ANK 2 OY 250 46.152GN RER PS415

B15A

MMBT5401

PNP 5OT-23 SWT

B16A

MMBT5401

PNP 5OT-23 SWT

B17

MMBT440

NP% 5OT-23 SWT

B18

W125 681R

1% 6805 SMT RES

B19

W125 681R

1% 6805 SMT RES

B20A

W100 1KB

1% 9805 SMT RES

B21A

W100 1KB

1% 9805 SMT RES

B22

200V 0BR

1% 0ARS SMT RES

B23

200V 0BR

1% 0ARS SMT RES

B24

200V 0BR

1% 0ARS SMT RES

B25A

200V 0BR

1% 0ARS SMT RES

B26

200V 0BR

1% 0ARS SMT RES

B27A

W100 1BB

1% 3805 SMT RES

B28

W100 1BB

1% 3805 SMT RES

B29A

W125 1BB

1% 9805 SMT RES

B30A

W125 1BB

1% 9805 SMT RES

B31A

W100 1KB

1% 3805 SMT RES

B32

8372 1 ML POLI HIMIDE LABEL, 375" X, 375"

B33

2355 14 CN HE CEROL RA 0 T

B34

2372 8 CN PH HEADER 20N

B35

2372 8 CN PH HEADER 70N

B36

4007 09 CN PH HEADER 0.156N

B37

4227 3 PIN POWER VH MALE, 156 SA

B38

4227 3 PIN POWER VH MALE, 156 SA

B39

4161 4 PIN POWER PIN HEADLER MALE POLZCD

B40

4161 4 PIN POWER PIN HEADLER MALE POLZCD

B41

2355 14 CN HE CEROL RA 0 T

REF YS # Description

S1-50K	M1694-59	PSA1S	AMP/SUPPLY PCB	D305	MUR	S120T3 200V 1A DIO DO214AA SMT	R255	W125	82K5 1%	0805 SMT RES
S1ASK	M1694BLANK 2	OZ 2SD	83.13SQIN 1PER ELITE PSA	D306	MUR	S120T3 200V 1A DIO DO214AA SMT	R256	W125	82K5 1%	0805 SMT RES
S200	100N 50V	5%CAP	0805 SMT X7R	D307	MUR	S120T3 200V 1A DIO DO214AA SMT	R257	W125	4K7 5%	0805 SMT RES
S202	100N 50V	5%CAP	0805 SMT X7R	D308	ES1	600V 1A0 DO214AC SMT SMA	R258	W100	20K5 1%	0805 SMT RES
S203	100N 50V	5%CAP	0805 SMT X7R	D309	ES1	600V 1A0 DO214AC SMT SMA	R259	W100	182K 1%	0805 SMT RES
S204	100N 50V	5%CAP	0805 SMT X7R	F301	FUSE	SLOW 7A 125V SMT 6125	R260	470K	5% THERMISTOR NTC 0805 SMT
S205	100N 50V	5%CAP	0805 SMT X7R	F302	FUSE	SLOW 7A 125V SMT 6125	R261	W100	274K 1%	0805 SMT RES
S206	100N 50V	5%CAP	0805 SMT X7R	E61	4181 TO220	THERMO PAD CERAMIC .080 THK	R262	W100	274K 1%	0805 SMT RES
S207	100N 50V	5%CAP	0805 SMT X7R	E62	4181 TO220	THERMO PAD CERAMIC .080 THK	R263	W100	13K 1%	0805 SMT RES
S208	100N 50V	5%CAP	0805 SMT X7R	E63	ZC1611 ES	PSA SERIES HEATSPREADER	R264	W125	1K4 1%	0805 SMT RES
S209	100N 50V	5%CAP	0805 SMT X7R	E61	8871 4-40	5/8 PAN PHILIPS MS BLACK ZINC	R265	W250	330R 5%	1206 SMT RES
S210	100N 50V	5%CAP	0805 SMT X7R	F62	8902 4-40	3/4 PAN PHILIPS MS TBZ	R266	1W00	47K 5%	2512 SMT RES
S211	100N 50V	5%CAP	0805 SMT X7R	F74	8485 #6 SP	LIT WASHER ZINC	R267	1W00	47K 5%	2512 SMT RES
S212	100N 50V	5%CAP	0805 SMT X7R	F75	3501 #4 B3	2200F-006 COMP WASH SMALL	R268	W125	4K02 0.1%	0805 SMT RES
S213	680P 50V	5%CAP	0805 SMT COG	E66	8742 4-40	3/8 PAN PH TAPTITE BO&W	R301	1W00	1K8 5%	2512 SMT RES
S214	470N 50V	5%CAP	1206 SMT X7R	F67	8835 6-32	1/2 PAN QUAD MS TIN PLATE	R303	6664 10W0	25K 5%	BLK RES
S215	_1U 50V	20%CAP	4.3X3.9 SMT ELC	F78	8800 6-32	KEPS NUT ZINC	R304	6664 10W0	25K 5%	BLK RES
S216	1U 25V	20%CAP	1206 SMT X7R	F89	8871 4-40	5/8 PAN PHILIPS MS BLACK ZINC	J200	LTV-8	141S ACINPUT OPTOCOUPLER SMT
S217	470P 50V	5%CAP	0603 SMT NPO	F910	8902 4-40	3/4 PAN PHILIPS MS TBZ	J201	LM311	COMPARATOR IC SMT SO-8
S218	_1N 50V	5%CAP	0805 SMT NPO	F911	8837 6-32	1/2 PAN PHILIPS MS TBZ	J202	LM311	COMPARATOR IC SMT SO-8
S219	5972 680N 400V	5%CAP BLK RAD POLY FLM		E612	8800 6-32	KEPS NUT ZINC	J203		IRS21844SPBF IC HILO FET DRV RSO14
S220	220N 50V	10%CAP	1206 SMT X7R	E613	8701 4-40	KEPS NUT ZINC	J204		33078 DUAL OPAMP SMT SO-8
S221	100N 100V	10%CAP	1206 SMT X7R	E614	8701 4-40	KEPS NUT ZINC	J205		33078 DUAL OPAMP SMT SO-8
S222	5951 _3U3 450	DC10%CAP BLK MPOLYP FLM		E615	8701 4-40	KEPS NUT ZINC	J206		TL331 COMPARATOR IC SMT SOT235
S223	5962 _2U2 140	AC10%CAP BLK RAD POLYP FLM		E616	8701 4-40	KEPS NUT ZINC	J207		LNK302G OFFLINE SWITCH SMT SMDBB
S224	_1U 50V	20%CAP	4.3X3.9 SMT ELC	E617	8485 #6 SP	LIT WASHER ZINC	J302	6856	NJM7815FA TO220 P 15V0 REG IS V1
S225	470P 50V	5%CAP	0603 SMT NPO	E618	3501 #4 B3	2200F-006 COMP WASH SMALL	J303	6857 NJM3	915FA TO220 N 15V0 REG IS V2
S226		_47N 100V 10%CAP 1206 SMT X7R		I200	6674_275	JH CHOKE 8TT16AWG77908MAGNTKS	R201	2328 8 CIR	XH-HEADER 0.098IN
S227	100N 50V	5%CAP	0805 SMT X7R	I202	1000	JH 10% COIL 12MM SMT	N301	4147 6 PIN	POWER PIN HEADER MALE POLZED
S228	5972 680N 400V	5%CAP BLK RAD POLY FLM		I300	3817_1.5TH	H COIL INPUT COM MODE	N302	4162 2 PIN	POWER PIN HEADER MALE POLZED
S229	5221 470P 100V	5%CAP POLYPROP BULK		I301	3128	_15UH COIL VTM160-4 22T 16AWG	N304	4146 3 PIN	POWER PIN HEADER MALE POLZED
S230	150P 50V	5%CAP	0805 SMT NPO	I601	4860+4	COIL COMMON MODE BA SMT	N305	4147 6 PIN	POWER PIN HEADER MALE POLZED
S231	100N 50V	5%CAP	0805 SMT X7R	Q200	MMB	TA92 PNP SOT-23 SMT	N307	4151 4 PIN	POWER PIN HEADER MALE POLZED
S232	_3U 25V	20%CAP	6.3X5.5 SMT EL	Q201	MMB	T4391LT1 NCH JFET SOT-23 SMT T&R	N402	4215_4 PIN	POWER VH MALE .156 10A
S233	100N 50V	5%CAP	0805 SMT X7R	Q203	2385 IRGP	SOB6OPDPBF T0247 NPN IGBT TM	N300		MM3218VT1G 18V0 OW2 5% SMT ZEN
S234	100N 50V	5%CAP	0805 SMT X7R	Q204	MMB	TA92 PNP SOT-23 SMT
S235	_1U 10V	20%CAP	0805 SMT Y5V	Q205	2385 IRGP	SOB6OPDPBF T0247 NPN IGBT TM
S236	100N 50V	5%CAP	0805 SMT X7R	R200	W125	10R0 1% 0805 SMT RES
S237	_1U 25V	20%CAP	1206 SMT X7R	R201	W100	12K1 1% 0603 SMT RES
S238	_4U7 50V	10%CAP	1210 SMT CER	R202	W125	10R0 1% 0805 SMT RES
S239	5270 _2U2 250V	20%CAP BLK RAD .1EL		R203	W100	10K0 1% 0805 SMT RES
S241	_4U7 50V	10%CAP	1210 SMT CER	R204	W100	12K1 1% 0603 SMT RES
S242	_1U 16V	10%CAP	1206 SMT X7R	R206	W125	10OK 5% 0805 SMT RES
S301	100N 100V	10%CAP	1206 SMT X7R	R207	W125	2K2 5% 0805 SMT RES
S302	5242 100N 250V	20%CAP BLK 'X2' 15MM AC		R208	W125	4M7 5% 0805 SMT RES
S303	5887 220U 50V	20%CAP BLK 18X27MM EL		R209	W125	10OK 5% 0805 SMT RES
S304	4U7 25V	20%CAP 4X5.5 SMT ELC		R210	W100	10K0 1% 0805 SMT RES
S305	5266 680N 250V	20%CAP BLK 'X2' 27MM AC		R212	W100	10K0 1% 0805 SMT RES
S306	100N 100V	10%CAP	1206 SMT X7R	R213	W100	182K 1% 0805 SMT RES
S307	5887 220U 50V	20%CAP BLK 18X27MM EL		R214	W125	4K7 5% 0805 SMT RES
S308	_4U7 25V	20%CAP 4X5.5 SMT ELC		R215	W125	47K5 1% 0805 SMT RES
S309	6451 _4N7 250V	20%CAP BLK 'Y' 10MM AC		R218	W125	8K66 1% 0805 SMT RES
S310	100N 100V	10%CAP	1206 SMT X7R	R219	W100	475R 1% 0805 SMT RES
S311	5935 330U 200V	10%CAP BLK 40X60MM 4PS		R221	W125	47OR 5% 0805 SMT RES
S312	5935 330U 200V	10%CAP BLK 40X60MM 4PS		R222	W100	10K0 1% 0805 SMT RES
S313	5935 330U 200V	10%CAP BLK 40X60MM 4PS		R223	W100	6K98 1% 0805 SMT RES
S314	5935 330U 200V	10%CAP BLK 40X60MM 4PS		R224	W125	47R 5% 0805 SMT RES
S315	5827 150N 250V	20%CAP BLK 'X2' 15MM AC		R225	W250	10R 5% 1206 SMT RES
S316	5242 100N 250V	20%CAP BLK 'X2' 15MM AC		R226		W100 4K75 1% 0805 SMT RES
S401	150P 100V	5%CAP 1206 SMT COG		R227	W100	1MO 1% 0805 SMT RES
S402	150P 100V	5%CAP 1206 SMT COG		R228	W250	10R 5% 1206 SMT RES
S403	6663CORE 7796	8-A KOOL MU POWDER CORES		R229	W100	6K98 1% 0805 SMT RES
S404	CDSF4148	75V OA15 100S SMT		R230	W100	9K09 1% 0805 SMT RES
S405	BZX84C22	22V0 0W3 5% SMT ZEN		R231	W100	1KO 1% 0805 SMT RES
S406	BAT750	SOT-23 SMT SCHTKY		R232	W100	1KO 1% 0805 SMT RES
S407	ES1J 60V	DV 1A ODO214AC SMT SMA		R233	W100	6K98 1% 0805 SMT RES
S408	ES1J 60V	DV 1A ODO214AC SMT SMA		R234	W100	182K 1% 0805 SMT RES
S409	BAT750	SOT-23 SMT SCHTKY		R236	W100	6K98 1% 0805 SMT RES
S410	ES1J 60V	DV 1A ODO214AC SMT SMA		R237	W100	1R0 5% 2512 SMT RES
S411	BZX84C43	43V 0W3 5% SMT ZEN		R240	W125	47OR 5% 0805 SMT RES
S412	MURA240	340V 2A DIO 403D SMT		R241	W100	2RO 1% 2512 SMT RES
S413	MURA240	340V 2A DIO 403D SMT		R242	W200	OR02 1% OARS SMT RES
S414	ES1J 60V	DV 1A ODO214AC SMT SMA		R243	W200	OR05 1% OARS SMT RES
S415	BZX84C15	LT1 15V0 W225 ZEN SOT23		R247	W125	1K50 1% 0805 SMT RES
S416	CDSF4148	75V OA15 100S SMT		R248	W100	2RO 1% 2512 SMT RES
S417	6852 BRIDGE 45A	6A60V WIRE LEAD SIP		R249	W250	1OR 5% 1206 SMT RES
S418	ES1J 60V	DV 1A ODO214AC SMT SMA		R250		W250 10R 5% 1206 SMT RES
S419	MURS120T 320V 1A DIO DO214AA SMT			R251		W125 1K50 1% 0805 SMT RES
S420	ES1J 60V	DV 1A ODO214AC SMT SMA		R252		W100 1MO 1% 0805 SMT RES

REF YS # Description REF YS #

Description

D305	MURS	120T3 200V 1A DIO DO214AA SMT	R255	W125	82K5 1%	0805 SMT RES
D306	MURS	120T3 200V 1A DIO DO214AA SMT	R256	W125	82K5 1%	0805 SMT RES
D307	MURS	120T3 200V 1A DIO DO214AA SMT	R257	W125	4K7 5%	0805 SMT RES
D308	ES1J	600V 1A0 DO214AC SMT SMA	R258	W100	20K5 1%	0805 SMT RES
D309	ES1J	600V 1A0 DO214AC SMT SMA	R259	W100	182K 1%	0805 SMT RES
F301	FUSE	SLOW 7A 125V SMT 6125	R260	470K	5% THERMISTOR NTC 0805 SMT
F302	FUSE	SLOW 7A 125V SMT 6125	R261	W100	274K 1%	0805 SMT RES
E91	4181 TO22	THERMO PAD CERAMIC .080 THK	R262	W100	274K 1%	0805 SMT RES
E92	4181 TO22	THERMO PAD CERAMIC .080 THK	R263	W100	13K 1%	0805 SMT RES
E93	ZC1611 ES	PSA SERIES HEATSPREADER	R264	W125	1K4 1%	0805 SMT RES
EX1	8871 4-40X	5/8 PAN PHILIPS MS BLACK ZINC	R265	W250	330R 5%	1206 SMT RES
FX2	8902 4-40X	3/4 PAN PHILIPS MS TBZ	R266	1W00	47K 5%	2512 SMT RES
FX4	8485 #6 SP	LIT WASHER ZINC	R267	1W00	47K 5%	2512 SMT RES
FX5	3501 #4 B5	2200F006 COMP WASH SMALL	R268	W125	4K02 0.1%	0805 SMT RES
FX6	8742 4-40X	3/8 PAN PH TAPTITE BO&W	R301	1W00	1K8 5%	2512 SMT RES
FX7	8835 6-32X	1/2 PAN QUAD MS TIN PLATE	R303	6664 10W0	25K 5%	BLK RES
FX8	8800 6-32	KEPS NUT ZINC	R304	6664 10W0	25K 5%	BLK RES
FX9	8871 4-40X	5/8 PAN PHILIPS MS BLACK ZINC	J200	LTV-	$141S ACINPUT OPTOCOUPLER SMT
FX10	8902 4-40X	3/4 PAN PHILIPS MS TBZ	J201	LM31	1 COMPARATOR IC SMT SO-8
FX11	8837 6-32	1/2 PAN PHILIPS MS TBZ	J202	LM31	1 COMPARATOR IC SMT SO-8
FX12	8800 6-32	KEPS NUT ZINC	J203		IRS21844SPBF IC HILO FET DRVR SO14
FX13	8701 4-40	KEPS NUT ZINC	J204		33078 DUAL OPAMP SMT SO-8
FX14	8701 4-40	KEPS NUT ZINC	J205	33078	DUAL OPAMP SMT SO-8
FX15	8701 4-40	KEPS NUT ZINC	J206		TL331 COMPARATOR IC SMT SOT235
FX16	8701 4-40	KEPS NUT ZINC	J207	LNK3	02G OFFLINE SWITCH SMT SMDBB
FX17	8485 #6 SP	LIT WASHER ZINC	J302	6856	NJM7815FA TO220 P 15V0 REG IS V1
FX18	3501 #4 B5	2200F006 COMP WASH SMALL	J303	6857 NJM	915FA TO220 N 15V0 REG IS V2
L200	6674 _275	JH CHoke 87T16AWG/77908MAGNTKS	N201	2328 8 CIR	XH-HEADER 0.098IN
L202	1000	JH 10% COIL 12MM SMT	N301	4147 6 PIN	POWER PIN HEADER MALE POLZED
L300	3817 _1.5M	H COIL INPUT COM MODE	N302	4162 2 PIN	POWER PIN HEADER MALE POLZED
L301	3128	_15UH COIL VTM160-4 22T 16AWG	N304	4146 3 PIN	POWER PIN HEADER MALE POLZED
L401	486U	H COIL COMMON MODE BA SMT	N305	4147 6 PIN	POWER PIN HEADER MALE POLZED
Q200	MMB	A92 PNP SOT-23 SMT	N307	4151 4 PIN	POWER PIN HEADER MALE POLZED
Q201	MMB	4391LT1 NCH JFET SOT-23 SMT T&R	N402	4215 _4 PIN	POWER VH MALE .156 10A
Q203	2385 IRGP	50B60PDPBF T0247 NPN IGBT TM	N200	MM3	Z18VT1G 18V0 0W2 5% SMT ZEN
Q204	MMB	A92 PNP SOT-23 SMT
Q205	2385 IRGP	50B60PDPBF T0247 NPN IGBT TM
R200	W125	10R0 1% 0805 SMT RES
R201	W100	12K1 1% 0603 SMT RES
R202	W125	10R0 1% 0805 SMT RES
R203	W100	10K0 1% 0805 SMT RES
R204	W100	12K1 1% 0603 SMT RES
R206	W125	100K 5% 0805 SMT RES
R207	W125	2K2 5% 0805 SMT RES
R208	W125	4M7 5% 0805 SMT RES
R209	W125	100K 5% 0805 SMT RES
R210	W100	10K0 1% 0805 SMT RES
R212	W100	10K0 1% 0805 SMT RES
R213	W100	182K 1% 0805 SMT RES
R214	W125	4K7 5% 0805 SMT RES
R215	W125	47K5 1% 0805 SMT RES
R218	W125	8K66 1% 0805 SMT RES
R219	W100	475R 1% 0805 SMT RES
R221	W125	470R 5% 0805 SMT RES
R222	W100	10K0 1% 0805 SMT RES
R223	W100	6K98 1% 0805 SMT RES
R224	W125	47R 5% 0805 SMT RES
R225	W250	10R 5% 1206 SMT RES
R226		W100 4K75 1% 0805 SMT RES
R227	W100	1M0 1% 0805 SMT RES
R228	W250	10R 5% 1206 SMT RES
R229	W100	6K98 1% 0805 SMT RES
R230	W100	9K09 1% 0805 SMT RES
R231	W100	1K0 1% 0805 SMT RES
R232	W100	1K0 1% 0805 SMT RES
R233	W100	6K98 1% 0805 SMT RES
R234	W100	182K 1% 0805 SMT RES
R236	W100	6K98 1% 0805 SMT RES
R237	1W00	1R0 5% 2512 SMT RES
R238	W100	100R 1% 0805 SMT RES
R240	W125	470R 5% 0805 SMT RES
R241	1W00	2R0 1% 2512 SMT RES
R242	2W00	0R02 1% OARS SMT RES
R243	2W00	0R05 1% OARS SMT RES
R247	W125	1K50 1% 0805 SMT RES
R248	1W00	2R0 1% 2512 SMT RES
R249	W250	10R 5% 1206 SMT RES
R250		W250 10R 5% 1206 SMT RES
R251		W125 1K50 1% 0805 SMT RES
R252	W100	1M0 1% 0805 SMT RES

REF YS # Description REF YS #
Description REF YS # Description

21	470P	250V 5%CAP 0603 SMT NP0	221	MMBT	A14 NPN DARL SOT-23 SMT	31	3522 DPDT	MINI PC VERT SNP ALT
22	470P	250V 5%CAP 0603 SMT NP0	B1	W100	1K0 1% 0805 SMT RES	31	33079	DUAL OPAMP SMT SO-8
23	5213	_1N 630V 5%CAP T&R RAD PRO.12FM	B2	W125	10K00 0.1% 0805 SMT RES	32	TL072	DUAL OPAMP SMT SO-8
26	5204 10N	100V 10%CAP T&R RAD .2FLM	B3	W100	2K74 1% 0805 SMT RES	35	33079	DUAL OPAMP SMT SO-8
29	47P	50V 5%CAP 0805 SMT NP0	B4	W100	1K0 1% 0805 SMT RES	36	33079	DUAL OPAMP SMT SO-8
29	5961_33U	16V 20%CAP T&R RAD .2IN NP	B5	W125	18K00 0.1% 0805 SMT RES	37		33078 DUAL OPAMP SMT SO-8
31	5234 470N	63V 10%CAP T&R RAD .2FLM	B6	W125	10K00 0.1% 0805 SMT RES	315	LM13	700M XCONDUCTANC AMP SMT IC
31.2	5234 470N	63V 10%CAP T&R RAD .2FLM	B7	W100	357K 1% 0805 SMT RES	318	33079	DUAL OPAMP SMT SO-8
31.3	5222_33N	100V 10%CAP T&R RAD .2FLM	B8	W100	221R 1% 0805 SMT RES	325	TL072	DUAL OPAMP SMT SO-8
31.4	5222_33N	100V 10%CAP T&R RAD .2FLM	B9	W125	100K 5% 0805 SMT RES	327	TL072	DUAL OPAMP SMT SO-8
31.6	5234 470N	63V 10%CAP T&R RAD .2FLM	B10	W125	47K 5% 0805 SMT RES	340	TL072	DUAL OPAMP SMT SO-8
31.7	5234 470N	63V 10%CAP T&R RAD .2FLM	B11	W125	47K 5% 0805 SMT RES	3100	2344 8 CIR	XH-HEADER RA 0.098IN
31.9	5265_68U	25V 20%CAP T&R RAD .2EL	B13	W125	100K 5% 0805 SMT RES	2D1	MM32	18VT1G 18V0 0W2 5% SMT ZEN
321	5265_68U	25V 20%CAP T&R RAD .2EL	B14		W100 221R 1% 0805 SMT RES	2D2	MM32	18VT1G 18V0 0W2 5% SMT ZEN
336	5212 100N	100V 5%CAP T&R RAD .2FLM	B15	W125	47K 5% 0805 SMT RES
337	5212 100N	100V 5%CAP T&R RAD .2FLM	B16	W125	220K 5% 0805 SMT RES
339	5226_68N	100V 5%CAP T&R RAD .2FLM	B17	W125	47K 5% 0805 SMT RES
340	5231 220N	63V 5%CAP T&R RAD .2FLM	B19	W100	348K 1% 0805 SMT RES
366	100N	50V 5%CAP 0805 SMT X7R	B19	W100	1K0 1% 0805 SMT RES
367	100N	50V 5%CAP 0805 SMT X7R	B20	W125	0R 5% 0805 SMT RES
348	5222_33N	100V 10%CAP T&R RAD .2FLM	B21	W125	1K800 0.1% 0805 SMT RES
379	5234 470N	63V 10%CAP T&R RAD .2FLM	B23	W100	10K0 1% 0805 SMT RES
350	5222_33N	100V 10%CAP T&R RAD .2FLM	B24	W125	47K 5% 0805 SMT RES
351	5234 470N	63V 10%CAP T&R RAD .2FLM	B25	W125	1K5 5% 0805 SMT RES
374	100N	50V 5%CAP 0805 SMT X7R	B27		W125 470R 5% 0805 SMT RES
393	270P	50V 5%CAP 0805 SMT NPO	B28	W100	10K0 1% 0805 SMT RES
394	270P	50V 5%CAP 0805 SMT NPO	B29	W100	4K99 1% 0805 SMT RES
3120	_1N	50V 5%CAP 0805 SMT NPO	B32	W125	4K7 5% 0805 SMT RES
3124	100N	50V 5%CAP 0805 SMT X7R	B33	W100	27K4 1% 0805 SMT RES
3125	100N	50V 5%CAP 0805 SMT X7R	B34	W100	27K4 1% 0805 SMT RES
3126	100N	50V 5%CAP 0805 SMT X7R	B35	W100	27K4 1% 0805 SMT RES
3127	100N	50V 5%CAP 0805 SMT X7R	B36		W125 100K 5% 0805 SMT RES
3128	100N	50V 5%CAP 0805 SMT X7R	B40	W125	47R 5% 0805 SMT RES
3129	100N	50V 5%CAP 0805 SMT X7R	B41	W100	2K74 1% 0805 SMT RES
3130	100N	50V 5%CAP 0805 SMT X7R	B42	W125	1K800 0.1% 0805 SMT RES
3131	100N	50V 5%CAP 0805 SMT X7R	B46	W125	82K5 1% 0805 SMT RES
3132	100N	50V 5%CAP 0805 SMT X7R	B47	W125	82K5 1% 0805 SMT RES
3133	100N	50V 5%CAP 0805 SMT X7R	B48		W125 22M0 5% 0805 SMT RES
3135	100N	50V 5%CAP 0805 SMT X7R	B49	W100	15K0 1% 0805 SMT RES
3136	100N	50V 5%CAP 0805 SMT X7R	B55		W100 15K0 1% 0805 SMT RES
3137	100N	50V 5%CAP 0805 SMT X7R	B56	W125	220K 5% 0805 SMT RES
3138	100N	50V 5%CAP 0805 SMT X7R	B68	W100	1M0 1% 0805 SMT RES
3139	100N	50V 5%CAP 0805 SMT X7R	B73	W125	1K02 0.1% 0805 SMT RES
3700	100N	50V 5%CAP 0805 SMT X7R	B84	W100	10K0 1% 0805 SMT RES
32	CDSF	4148 75V 0A15 1005 SMT	B85	W125	68K 5% 0805 SMT RES
33	CDSF	4148 75V 0A15 1005 SMT	B86	W100	2K0 1% 0805 SMT RES
34	CDSF	4148 75V 0A15 1005 SMT	B89		W125 5K6 1% 0805 SMT RES
35	CDSF	4148 75V 0A15 1005 SMT	B90	W125	47K 5% 0805 SMT RES
36	CDSF	4148 75V 0A15 1005 SMT	B90		W125 22K 5% 0805 SMT RES
37	CDSF	4148 75V 0A15 1005 SMT	B91	W125	22K 5% 0805 SMT RES
39	CDSF	4148 75V 0A15 1005 SMT	B92	W125	47K 5% 0805 SMT RES
31.0	CDSF	4148 75V 0A15 1005 SMT	B93	W125	47K 5% 0805 SMT RES
31.1	CDSF	4148 75V 0A15 1005 SMT	B94	W125	47K 5% 0805 SMT RES
31.5	CDSF	4148 75V 0A15 1005 SMT	B95	W125	4K7 5% 0805 SMT RES
324	CDSF	4148 75V 0A15 1005 SMT	B96	W100	27K4 1% 0805 SMT RES
331	CDSF	4148 75V 0A15 1005 SMT	B97	W100	27K4 1% 0805 SMT RES
335	CDSF	4148 75V 0A15 1005 SMT	B98	W100	27K4 1% 0805 SMT RES
339	CDSF	4148 75V 0A15 1005 SMT	B107		W125 18K00 0.1% 0805 SMT RES
340	CDSF	4148 75V 0A15 1005 SMT	B111	W125	470R 5% 0805 SMT RES
346	CDSF	4148 75V 0A15 1005 SMT	B112	W125	4K7 5% 0805 SMT RES
347	CDSF	4148 75V 0A15 1005 SMT	B113	W125	1K5 5% 0805 SMT RES
348	CDSF	4148 75V 0A15 1005 SMT	B114	W100	27K4 1% 0805 SMT RES
31	4140 XLR	ALE PCB MT VERT 24MM A-SERIES	B115	W125	82K5 1% 0805 SMT RES
32	4010 XLR	EML PCB MT VERT 24MM AA-SERIES	B116	W100	2K74 1% 0805 SMT RES
33	4063 1/4IN	ISO JCK PCMT VT STER RT SWT	B118	W100	2K21 1% 0805 SMT RES
37	4063 1/4IN	ISO JCK PCMT VT STER RT SWT	B119	W100	274K 1% 0805 SMT RES
31.0	_15.0JH COIL 0805 SMT		B120	W125	33K 5% 0805 SMT RES
31.1	_15.0JH COIL 0805 SMT		B121	W100	10K0 1% 0805 SMT RES
31.2	_15.0JH COIL 0805 SMT		B122	W100	2K32 1% 0805 SMT RES
31.3	_15.0JH COIL 0805 SMT		B123	W125	OR 5% 0805 SMT RES
3D1	GRN	3MM LED 2V2 20MA DIFFUSD	B124	W125	82K5 1% 0805 SMT RES
3D2	6400 YEL	3MM LED 2V1 20MA DIFFUSD	B126	W100	10K0 1% 0805 SMT RES
3D3	6405 RED	3MM LED 2V1 20MA DIFFUSD	B127	W100	10K0 1% 0805 SMT RES
31	2339_10K	B LIN 12MM DUAL 21DET P34	B128	W100	1M0 1% 0805 SMT RES
PSALS	W250	OR 1206 SMT RES	B142		W100 10K0 1% 0805 SMT RES
PTC1	6543 48R	65V RESETTABLE THERMISTOR PTC	B159	W100	1M0 1% 0805 SMT RES
Q1	MMBF	5401 PNP SOT-23 SMT	B164	W125	1K5 5% 0805 SMT RES
Q2	MMBF	3904 NPN SOT-23 SMT	B165	W125	30K 0.5% 0805 SMT RES
Q4	MMBF	3904 NPN SOT-23 SMT	B181	W125	30K 0.5% 0805 SMT RES
Q5	MMBF	3904 NPN SOT-23 SMT	B196	W100	4K99 1% 0805 SMT RES

M1824 Rev2 Parts Reference List 3/17/2020

REF

YS #

Description

REF

YS #

Description

REF

YS #

Description

REF

YS #

Description

REF

YS #

Description

31-201

M1824.5

P3415

AVP-SUPPLY PCU

FUSE FAST 3/6 25V/DC 300AC SMT 39/2

B2-1

1Y-00 2/0 1%

2512 SMT RLS

3051

10N

SOW 5NCAP

0805 SMT XTR

C2

FUSE FAST 3/6 25V/DC 300AC SMT 39/2

B2-2

2Y-00 30/02 1%

OANS SMT RES

3051

10N

SOW 5NCAP

0805 SMT XTR

E-10

FUSE SLOW TA 125V SMT 6125

B2-3

2Y-00 30/05 1%

OANS SMT RES

3055

10N

SOW 5NCAP

0805 SMT XTR

E-20

FUSE SLOW TA 125V SMT 6125

B2-7

W-25 4X7 5%

0805 SMT RES

3056

10N

SOW 5NCAP

0805 SMT XTR

E-5

5161 13 220 T LERMO PAD CRLAMIC 390 THK

B2-18

1Y-00 2/0 1%

2512 SMT RLS

3051

10N

SOW 5NCAP

0805 SMT XTR

E-5

5161 13 220 T LERMO PAD CRLAMIC 390 THK

B2-19

W-25 1X3 5%

1205 SMT RES

3059

10N

SOW 5NCAP

0805 SMT XTR

E-5

2C1611 B3 PSA SERIES HEATSPREADER

B2-40

W-00 1X8 5%

1205 SMT RES

3110

10N

SOW 5NCAP

0805 SMT XTR

E-2

0671 4-X3X6 PAN PHILIPS 1/2 BLACK ZINC

B2-21

W-25 4X7 5%

0005 SMT RES

3111

10N

SOW 5NCAP

0805 SMT XTR

E-2

0671 4-X3X6 PAN PHILIPS 1/2 BLACK ZINC

B2-22

W-00 1X0 1%

0005 SMT RES

3113

68P

06V 25GAP

3005 SMT CIG

H-1

9450 90 EPLIT WASHER ZINC

B2-55

W-25 92X5 1%

0005 SMT RES

3114

47N

SOW 5NCAP

1205 SMT XTR

H-1

3501 94 D5220000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

B2-56

W-25 92X5 1%

0005 SMT RES

3115

1U

SOW 20NCAP

4.3X3.9 SMT ELO

H-1N

8742 6-X3X8 PAN PH TAPTITE BOAW

B2-72

W-25 4X7 5%

0005 SMT RES

3116

1U

SOW 20NCAP

0805 SMT NPO

H-1N

8742 6-X3X8 PAN PH TAPTITE BOAW

B2-78

W-00 23X5 1%

0005 SMT RES

3117

47P

06V 25GAP

3005 SMT NPO

H-1N

9900 6-X2 KLPS NUT ZINC

B2-14

W-00 1X2X 1%

0005 SMT RES

3119

1U

SOW 5NCAP

0805 SMT NPO

H-1N

8871 4-X3X8 PAN PHILIPS 1/2 BLACK ZINC

B2-16

47X8 5% THERMISTOR NTC 0805 SMT

3121

5972 68N

040V 5NCAP BLK RAD POLY FLM

H-1N

E-13

6902 4-X3X4 PAN PHILIPS 1/2 BLACK ZINC

B2-21

W-00 27X8 1%

0005 SMT RES

3122

22N

SOW 5NCAP

1205 SMT XTR

H-1N

8871 4-X3X4 PAN PHILIPS 1/2 BLACK ZINC

B2-22

W-00 27X8 1%

0005 SMT RES

3123

10N

000V 15NCAP

1205 SMT XTR

H-1N

9900 6-X2 KLPS NUT ZINC

B2-63

W-00 1X4 1%

0005 SMT RES

3124

5966 10N

500V DC 5NCAP BLK MPOYP FLM

H-1N

E-13

9701 4-X3 KPLS NUT ZINC

B2-64

W-50 33X8 5%

1205 SMT RES

3125

5967

2D 140AC 10NCAP BLK RAD POLY FLM

H-1N

E-13

9701 4-X3 KPLS NUT ZINC

B2-65

W-50 33X8 5%

1205 SMT RES

3126

1U

SOW 20NCAP

4.3X3.9 SMT ELO

H-1N

9701 4-X3 KPLS NUT ZINC

B2-66

1Y-00 4X7 5%

2512 SMT RES

3127

47P

06V 25GAP

3005 SMT NPO

H-1N

9701 4-X3 KPLS NUT ZINC

B2-67

1Y-00 4X7 5%

2512 SMT RES

3128

47N

000V 15NCAP

1205 SMT XTR

H-1N

9450 90 EPLIT WASHER ZINC

B2-10

W-25 4X62 9.1%

0805 SMT RES

3129

10N

SOW 5NCAP

0805 SMT XTR

H-1N

8921 74 IM FLAT WASHER 128"0" 272"OD

B2-13

6684 10"0" 2X8 5%

BLK RES

3130

5972 68N

040V 5NCAP BLK RAD POLY FLM

H-1N

E-13

3514 4-X3200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

E-13

6881 10"0" 2X8 5%

BLK RES

3131

5926 47N

160V 25GAP POLYSHOP BULK

H-1N

E-13

8921 74 IM FLAT WASHER 128"0" 272"OD

B2-11

8772 11 BL POLYARD LABEL 37C" X 37"

3132

10N

06V 25GAP

3005 SMT NPO

H-1N

8821 74 IM FLAT WASHER 128"0" 272"OD

B2-16

L-4X 4"5 AC/INPUT OF 10COUMPLER SMT

3133

10N

SOW 5NCAP

0805 SMT XTR

H-1N

8821 74 IM FLAT WASHER 128"0" 272"OD

B2-17

L-4X 4"5 AC/INPUT OF 10COUMPLER SMT

3134

10N

SOW 5NCAP

6.3X3.5 SMT EL

E-20

6674 2 SUH CHOKE 8716AWG7799WAGNTK2

E-22

L-311 COMPARATOR IC SMT 80x8

3135

3U

25V 25GAP

6.3X3.5 SMT EL

E-20

6674 2 SUH CHOKE 8716AWG7799WAGNTK2

E-22

L-311 COMPARATOR IC SMT 80 x8

3136

10N

SOW 5NCAP

0805 SMT XTR

E-20

10 BUII 10% COIL IZMW SMT

E-23

862384SPBF IC HLD FLT DRIVER SQ145

3137

10N

SOW 5NCAP

0805 SMT XTR

E-20

3917 1 SMI COIL INPUT COM MODEL

E-24

33X70 DUAL OPAMP SMT SC-8

3138

1U

18V 15NCAP

1205 SMT XTR

E-21

3128 SHU COL VTM150-22T 16WGS

E-25

33X70 DUAL OPAMP SMT SC-8

3139

10N

SOW 5NCAP

0805 SMT XTR

E-21

481 SHU COL COMMON MODE BA SMT

E-26

TL-31 COMPARATOR IC SMT 80x35

3140

1U

18V 15NCAP

1205 SMT XTR

E-21

M1826 2 ZS20 RS 858BN 1"CR 5415

E-27

LN-5826 OFFLINE SWITCH SMT 55XX8

3141

4U

SOW 5NCAP

1210 SMT CLR

E-20

M1826 2 PNP SMT 23-SMT

E-27

6959 N 7M15A TOZZO 9 WDB LG S V1

3142

5270

2U 25V 25GAP BULK NOAD 1LL

E-20

E-20

M1826 2 PNP SMT 23-SMT XTR

E-24

6957 N 7M15A TOZZO 9 WDB LG IS V2

3143

4U

SOW 5NCAP

1210 SMT CER

E-20

2496 80 POGBOPD1PBF 10247 NPN IGBT T

E-21

2328 8 CR XR HEADER 0.09BN

3144

1U

18V 15NCAP

1205 SMT XTR

E-20

M1826 2 PNP SMT 23-SMT

E-21

4243 5 OSI HEADER ASSY (MALE) PCM MOUNT

3145

1U

10V 15NCAP

1205 SMT XTR

E-20

2596 16 POGBOPD1PBF 10247 NPN IGBT T

E-22

4244 2 OSI HEADER ASSY (MALE) PCM MOUNT

3146

5242 10N

25V 25GAP BLK XZ 16WAM AG

E-1

E-1

W-25 1K54 1% 08US SMT RES

E-24

4149 3 IN POWER PIN HEADER MALE POZZED

3147

5577 2U

SOW 20NCAP BLK 16X27WV EL

E-1

E-1

W-25 1K54 1% 08US SMT RES

E-26

4243 8 OSI HEADER ASSY (MALE) PCM MOUNT

3148

—

25V 25GAP

4X5.5 SMT EL

E-1

W-25 1K54 1% 08US SMT RES

E-27

4151 4 IN POWER PIN HEADER MALE POZZED

3149

5266 68N

25V 25GAP BLK XZ 27WAM AG

E-1

E-1

W-25 1K54 1% 08US SMT RES

E-28

4215 4 PIN POWER VIH MALL 13X IQA

3150

10N

SOW 5NCAP

1205 SMT XTR

E-1

W-25 2K32 1% 08US SMT RES

E-29

W-2528VTIG 18X0.042 3% SBT ZEN

3151

5847 29N

SOW 20NCAP BLK 16X27WV EL

E-1

E-1

W-25 2K32 1% 08US SMT RES

3152

4U

25V 25GAP

4X5.5 SMT ELO

E-2

W-25 1K6 1% 08US SMT RES

3153

8451 1N

27V 25GAP BLK Y' 16WAM AC

E-20

W-25 1K6 1% 1206 SMT RES

3154

5835 33N

2U 20V 13NCAP BLK 4X3X9WV 4PS

E-21

W-25 1K6 1% 08US SMT RES

3155

5836 33N

2U 20V 13NCAP BLK 4X3X9WV 4PS

E-22

W-25 1K6 1% 1206 SMT RES

3156

5836 33N

2U 20V 13NCAP BLK 4X3X9WV 4PS

E-23

W-25 1K6 1% 08US SMT RES

3157

5836 33N

2U 20V 13NCAP BLK 4X3X9WV 4PS

E-24

W-25 1K6 1% 08US SMT RES

3158

5837 10N

25V 25GAP BLK XZ 16WAM AG

E-25

W-25 1K6 1% 08US SMT RES

3159

5842 10N

25V 25GAP BLK XZ 16WAM AG

E-26

W-25 1K6 1% 08US SMT RES

3160

4U

SOW 5NCAP

1205 SMT CHS

E-26

W-25 1K6 1% 08US SMT RES

3161

1U

SOW 5NCAP

1205 SMT CHS

E-26

W-25 1K6 1% 08US SMT RES

3162

1U

SOW 5NCAP

1205 SMT CHS

E-26

W-25 1K6 1% 08US SMT RES

3163

3U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

3164

4U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

3165

4U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

3166

4U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

3167

4U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

3168

4U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

3169

4U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

3170

4U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

3171

4U

25V 25GAP

4X5.5 SMT ELO

E-26

W-25 1K6 1% 08US SMT RES

M1996-02 Parts Reference List 8/4/2021

RUE YS # Description REF YS #

Description

REF

YS #

Description

REF

YS #

Description

REF

YS #

Description

1

W106 69 PS RA SUBS DSP INPUT RGB

213

W125 1K60 0.1% CBO5 SWT RES

470P 26W SICAP 0K50 SMT NPR

213

W100 2004 1% 0005 SWT RES

470P 26W SICAP 0K50 SMT NPR

214

W125 472 8% 0005 SWT RES

10N 2504 SICAP 0K50 SMT XTR

215

W125 6027 5% 2006 SWT RES

10N 2504 SICAP 0K50 SMT XTR

215

W125 240 1% 0005 SWT RES

690U 62W 0XCAP 5X10 SMT ELE

216

W100 1004 1% 0005 SWT RES

10U 15W 0XCAP 0K50 SMT XSR

219

W105 4985 1% 0503 SWT RES

10U 18W 0XCAP 0K50 SMT XSR

220

W105 4985 1% 0503 SWT RES

470N 52W 0XCAP 0K50 SMT XTR

221

W125 1K60 0.1% 0005 SWT RES

10N 52W 0XCAP 0K50 SMT XTR

222

W125 474 5% 0505 SWT RES

10N 52W 0XCAP 0K50 SMT XTR

225

W125 1K60 0.1% 0005 SWT RES

10N 52W 0XCAP 0K50 SMT XTR

225

W125 1K60 0.1% 0005 SWT RES

10N 52W 0XCAP 0K50 SMT XTR

329

W100 4984 1% 0005 SWT RES

10N 52W 0XCAP 0K50 SMT XTR

330

W100 2632 1% 0005 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

333

W100 1003 1% 0005 SWT RES

10N 52W 0XCAP 0K50 SMT XTR

337

W100 1003 1% 0005 SWT RES

10U 15W 0XCAP 0K50 SMT XTR

344

W100 1004 1% 0005 SWT RES

10U 15W 0XCAP 0K50 SMT XTR

345

W125 1K60 0.1% 0005 SWT RES

10N 52W 0XCAP 0K50 SMT XTR

346

W125 467 5% 0505 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

347

W125 8248 1% 0505 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

348

W125 7530 1% 0505 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

349

W125 7530 1% 0505 SMT RES

10N 15W 0XCAP 0K50 SMT XTR

351

W125 478 5% 0505 SMT RES

10N 15W 0XCAP 0K50 SMT XTR

353

W100 260 1% 0505 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

355

W100 2632 1% 0505 SMT RES

10N 15W 0XCAP 0K50 SMT XTR

357

W125 2245 1% 0505 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

359

W125 8248 1% 0505 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

360

W125 8248 1% 0505 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

364

W100 1004 1% 0505 SMT RES

470P 52W 0XCAP 0K50 SMT NPO

365

W125 39K 0.2% 0505 SMT RES

10N 52W 0XCAP 0K50 SMT XTR

366

W125 8332 1% 0505 SMT RES

10N 15W 0XCAP 0K50 SMT XTR

367

W125 478 1% 0505 SMT RES

10N 15W 0XCAP 0K50 SMT XTR

368

W125 58K 0.5% 0505 SMT RES

10N 15W 0XCAP 0K50 SMT XTR

369

W125 DTEI MINI PC VERT SNF ALT

3722 DTEI MINI PC VERT SNF ALT

10N 52W 0XCAP 0K50 SMT XTR

371

W125 DTEI MINI PC VERT SNF ALT

3722 DTEI MINI PC VERT SNF ALT

10N 52W 0XCAP 0K50 SMT XTR

372

TEST POINT MINIATURE SMT

10N 52W 0XCAP 0K50 SMT XTR

377

TEST POINT MINIATURE SMT

33P 100W 0XCAP 0K50 SMT COG

378

TEST POINT MINIATURE SMT

33P 100W 0XCAP 0K50 SMT COG

379

TEST POINT MINIATURE SMT

13P 52W 0XCAP 0K50 SMT NPO

380

TEST POINT MINIATURE SMT

13P 15W 0XCAP 0K50 SMT XTR

381

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

382

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

383

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

384

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

385

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

386

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

387

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

388

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

389

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

390

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

391

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

392

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

393

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

394

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

395

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

396

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

397

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

398

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

399

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

400

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

401

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

402

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

403

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

404

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

405

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

406

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

407

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

408

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

409

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

410

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

411

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

412

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

413

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

414

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

415

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

416

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

417

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

418

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

419

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

420

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

421

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

422

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

423

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

424

TEST POINT MINIATURE SMT

10N 15W 0XCAP 0K50 SMT XTR

425

TEST POINT MINIATURE SMT

M2127-01 Parts Reference List 3/14/2022

RUF YS # Description REF YS #

Description

REF

YS #

Description

REF

YS #

Description

NUF

YS # Description

1-2016

M2127 50 P&A

AMPSUPPLY FICE

H103

SMXZ 8-13.F BWC 1WD 5% SWT ZEN

9241

1W00

2WD 1%

2512 SMT RES

2-2016

M2127/ALK 2

DZ 2SD 88/350IN TPLR PSATS

P1

FUSB FAST GAS 25XVDC 35XAC SMT 3912

9242

2WD

8WD 1%

CABG SMT RES

2-2016

100N 500

SCAP 080S SWT XTR

P2

FUSB FAST GAS 25XVDC 35XAC SMT 3912

9243

2WD

8WD 1%

CABG SMT RES

2-2016

100N 500

SCAP 080S SWT XTR

P201

FUSB BLOW TA 125Y SWT 8128

9247

W125

4WD 5%

B605 SMT RES

2-2016

100N 500

SCAP 080S SWT XTR

P202

FUSB BLOW TA 125Y SWT 8128

9248

W125

2WD 5%

2512 SMT RES

2-2016

100N 500

SCAP 080S SWT XTR

H11

F181 TO2B THERVO PAD CERAMC 260 THK

9249

W250

12W 5%

2506 SMT RES

2-2016

100N 500

SCAP 080S SWT XTR

H17

F181 TO2B THERVO PAD CERAMC 260 THK

9250

W250

12W 5%

2506 SMT RES

2-2016

100N 500

SCAP 080S SWT XTR

H12

276161153 PSA SERIES HEATSPEADER

9251

W125

4WD 5%

B605 SMT RES

2-2016

100N 500

SCAP 080S SWT XTR

H11

B621 4-48DS PAN PHILIPS ME BLACK ZINC

9252

W125

1WD 5%

B605 SMT RES

2-2016

100N 500

SCAP 080S SWT XTR

H12

B602 4-48DS PAN PHILIPS ME TEZ

9253

W125

8WD 5%

3805 SMT RES

2-2016

500N 500

SCAP 080S SWT XDRG

H16

B485 5-SUT WISHER ZINC

9256

W125

8WD 5%

3805 SMT RES

2-2016

470N 500

SCAP 120K SWT XTR

H15

3361 COUPESSION WASHER

9257

W125

4WD 5%

B605 SMT RES

2-2016

1U 200

20/SCAP 4.3XX3.9 SMT ELC

H16

W742 4-48DS PAN HI TAPTITE BOMY

9258

W130

2WD 5%

3805 SMT RES

2-2016

1N 200

SCAP 080S SWT NPO

H17

B635 5-322X PAN QUAD VS TIN PLATE

9259

W130

1WD 5%

3805 SMT RES

2-2016

470P 180

SCAP 890S SMT NPO

H18

B630 5-32

KEPS NUT ZINC

9260

7WD 5%

THERMESTOR NTC 0805 SMT

2-2016

1N 500

SCAP 080S SWT NPO

H19

B371 4-48DS PAN PHILIPS ME BLACK ZINC

9261

W130

2WD 5%

3805 SMT RES

2-2016

5772 580N

SCAP BLK RAD POLY FLM

H21

B602 4-48DS PAN PHILIPS ME TEZ

9262

W130

2WD 5%

3805 SMT RES

2-2016

220N 500

10/SCAP 120K SMT XTR

H211

B637 5-32 X 12 PAN PHILIPS AS TIZ

9263

W130

1WD 5%

B605 SMT RES

2-2016

100N 100N

10/SCAP 120B SMT XTR

H212

B630 5-32

KEPS NUT ZINC

9264

W130

1WD 5%

B605 SMT RES

2-2016

5806 100/500

30/SCAP BLK MPOLYP FLM

H213

B701 4-48

KEPS NUT ZINC

9265

W250

30XR 5%

1208 SMT RES

2-2016

5962 200 140

60/SCAP BLK RTAD POLY PFM

H214

B701 4-48

KEPS NUT ZINC

9266

W250

4XR 5%

2512 SMT RES

2-2016

1U 500

20/SCAP 4.3XX3.9 SMT FLC

H215

B701 4-48

KEPS NUT ZINC

9267

W250

4XR 5%

2512 SMT RES

2-2016

470P 180

SCAP 890S SMT NPO

H216

B701 4-48

KEPS NUT ZINC

9268

W250

61% 0805 SMT RES

2-2016

47N 100N

10/SCAP 120B SMT XTR

H217

B485 5-SUT WISHER ZINC

9269

B604 100W

23K 2%

3LK RES

2-2016

100N 500

SCAP 080S SWT XTR

H218

B921 ALUM FLAT WASHER 128YID 272 CD

9260

B604 100W

23K 2%

3LK RES

2-2016

5872 660N 400

50/SCAP BLK RAD POLY FLM

H217

3361 COUPESSION WASHER

9261

B372 1 MII

POLYWHOF LAREL 375X 375*

2-2016

5726 476P 1800

50/SCAP POLYPROP BULK

H225

B601 ALUM FLAT WASHER 128YID 272 CD

9262

LTQ4

M15 AGNUT OPTOCOUPPER SMT

2-2016

150P 500

50/SCAP 890S SMT NPO

H216

B631 ALUM FLAT WASHER 128YID 272 CD

9263

LM30

COMPARATOR IC SMT SO-8

2-2016

100N 500

60/SCAP 080S SWT XTR

H217

B631 ALUM FLAT WASHER 128YID 272 CD

9264

LM30

COMPARATOR IC SMT SO-8

2-2016

320U 280

20/SCAP 6.3XX5.5 SMT EL

2200

B765 275I CHICK SLIT 3WASY700WAGNINGS

9265

B368 HS2

M4 IPODE IC BLT LET DRIVER

2-2016

100N 500

080S SWT XTR

2202

103011 10% COIL 12MW SMT

9266

3387

DUAL OPAMP SMT SO-5

2-2016

100N 500

SCAP 080S SWT XTR

2300

3317 150H COII INPUT COMMODF

9266

3387

DUAL OPAMP SMT SO-5

2-2016

16U 160

100S SWT XTR

2301

3198 15W COII VTH168-4 22T 16AWG

9266

TL39

COMPARATOR IC SMT SO7285

2-2016

100N 500

SCAP 080S SWT XTR

2301

4863 H COII COMON NMODF SA SMT

9267

LM30

DCP OFFIP SWITCH SMT SO7285

2-2016

1U 500

100S SWT XTR

2302

WMETAS 290 SMT SO7 23 SMT

9268

B606 NUMES 7022E P SMT RES

2-2016

4U7 500

100S SWT XTR

2303

WMETAS 290 SMT SO7 23 SMT

9269

B607 NAM 7022E TO20N 10VNO RES IS Y2

2-2016

3U9 250

20/SCAP 8X10 SMT ELE

2423

2385 RGC/8X9POPER TO217 NPN IGBT TM

9261

2328 6 GB XHEADER OUMIN

2-2016

4U7 500

10/SCAP 120B SMT CSR

2424

WMETAS 292 PNP SO7-28 SMT

9261

6433 6 PD HEADER ASSY WAE LE POB MOUNT

2-2016

16U 160

10/SCAP 120K SST XTR

2425

2385 RGC/8X9POPER TO247 NPN IGBT TM

9262

4244 2 PD HEADER ASSY WAE LE POB MOUNT

2-2016

100N 100N

10/SCAP 120B SST XTR

B1

W12E 1KS4 4% OBS SMT RFS

9263

4146 5 Pin POWER PIN HEADER VALER POB PED

2-2016

5242 100N 200

20/SCAP BLK X2 SMM AGC

B1

W12E 1KS4 4% OBS SMT RFS

9264

4245 5 PKI HEADDER ASSY WAE LE POB MOUNT

2-2016

5967 220U 50

20/SCAP BLK 18XX7MM EL

B1

W12E 1KS4 4% OBS SMT RFS

9265

4151 4 Pin POWER PIN HEADDER VALER POB MOUNT

2-2016

4U7 250

20/SCAP AX5.5 SMT FLC

B1

W12E 1KS4 4% OBS SMT RFS

9266

6215 200A HEADPER STRAIGHT PIN IPPOS B168

2-2016

5298 860N 280

20/SCAP BLK X2 27MM AC

B1

W100 2K32 4% OBS SMT RFS

9267

VM33

BV7TG 18WE 6W2 5% SO7 ZFN

2-2016

100N 100N

10/SCAP 120B SST XTR

B1

W100 2K32 4% OBS SMT RFS

9268

1-2016

5887 220U 50

20/SCAP BLK 18XX7MM EL

B1

W100 1KD 4% OBS SMT RES

1-2016

4U7 250

20/SCAP AX5.5 SMT ELC

B1

W250 1DR 5% OBS SMT RES

1-2016

8157 4W 250

20/SCAP BLK Y 18MM AC

B201

W110 1KR 5% OBS SMT RES

1-2016

5935 330U 280

10/SCAP BLK 40XX8MM 4PS

B202

W270 1KR 5% OBS SMT RES

1-2016

5935 330U 280

10/SCAP BLK 40XX8MM 4PS

B203

W100 1OK 4% OBS SMT RES

1-2016

5935 330U 280

10/SCAP BLK 40XX8MM 4PS

B204

W100 1KR 4% OBS SMT RES

1-2016

5935 330U 280

10/SCAP BLK 40XX8MM 4PS

B205

W100 1OK 4% OBS SMT RES

1-2016

5935 330U 280

10/SCAP BLK X2 SMM AGC

B206

W100 1KD 4% OBS SMT RES

1-2016

5935 330U 280

20/SCAP BLK X2 SMM AGC

B207

W100 1KD 4% OBS SMT RES

1-2016

5242 100N 280

20/SCAP BLK X2 SMM AGC

B208

W100 1KD 4% OBS SMT RES

1-2016

5242 100N 280

20/SCAP BLK X2 SMM AGC

B209

W100 1KD 4% OBS SMT RES

1-2016

150P 100N

5/SCAP 120B SMT COG

B210

W100 1OK 4% OBS SMT RES

1-2016

150P 100N

5/SCAP 120B SMT COG

B211

W100 1OK 4% OBS SMT RES

1-2016

5872 220U 50

20/SCAP BLK DQ214AC BMT ZEN

B212

W100 1OK 4% OBS SMT RES

1-2016

4U7 250

20/SCAP AX5.5 SMT ELC

B213

W100 1OK 4% OBS SMT RES

1-2016

6304 144N

RV-VA10 120K SST

B214

W120 1KO 5% OBS SMT RES

1-2016

32545422

22WV 9W3 CN SMT ELV

B215

W120 4WS 5% OBS SMT RES

1-2016

RAT75N

SOY-23 SAT SCHTKY

B216

W130 8XB8 4% OBS SMT RES

1-2016

FSJ1 60W

DOY DQ214AC SMT SUA

B217

W100 7BR 4% OBS SMT RES

1-2016

ESJ1 60W

DOY DQ214AC SMT SUA

B221

W100 47BR 4% OBS SMT RES

1-2016

BAT75N

SOT-23 SAT SCHTKY

B222

W100 1OK 4% OBS SMT RES

1-2016

DUSF 144N

70V AV410 100S SST

B223

W100 8KB9 5% OBS SMT RES

1-2016

ESJ1 48W

DOY DQ214AC SMT SUA

B224

W120 4WR 5% OBS SMT RES

1-2016

32545422

43WV 9W3 CN SMT ELV

B225

W270 1KR 5% OBS SMT RES

1-2016

32545422

43WV 9W3 CN SMT ELV

B226

W100 1OK 4% OBS SMT RES

1-2016

32545422

43WV 9W3 CN SMT ELV

B227

W100 1OK 4% OBS SMT RES

1-2016

32545422

43WV 9W3 CN SMT ELV

B228

W100 1OK 4% OBS SMT RES

Use YSA4007 Clip $ approx 12.7Vpk 12dB HP @ 40Hz Boost 3.5dB $ 40Hz 12dB LP @ 95Hz 12dB HP @ 40Hz Full-Wave Rectifier To POWER AMPUER J3 Amp Headers V+ From Power Supply Rail-Tracking Peak Limiter Power Limiter Use YSA4007 Product PSA1S Preamp PCBP 89168041 of Date: Red Matype: 2096 V83 Filename: M1449V63ech.sch2008

Yorkeille	Product PSA1S
	Presmp	PCB# SR#041	of
	Date: Red MaType:2056	V03
	Filename: M1449V03ech.sch2008

Use YS#3606 breaker for both NA and CE. Circuit Breaker AC In AC In 120Vac 240Vac 120V 240V PRIMARIES SECONDARIES +120V Pin 6 N.C. CH1415U W5 W11 W1.4 W1.8 W1.0 W1.9 W1.3 W1.7 W1.1 W1.5 W1.8 W1.2 W1.6 W1.9 W1.3 W1.7 W1.8 W1.1 W1.5 W1.8 W1.3 W1.7 W1.8 W1.1 W1.5 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.4 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.2 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3 W1.7 W1.8 W1.3

Microcontroller (on preamp board)

Use YSP4007 BDM_PORT THESE PARTS ARE NOT STUFFED. Open Woofer Shutdown

Varioville	Product PSA1S
	MCU:Power Supply	PCB# SR16042	of
	Date: Red May 2016 V03
	Filename: M1449V03ech.sch2006

M1449 PCB HISTORY
MODEL(S):- PSA1S
#	DATE	VER#	DESCRIPTION OF CHANGE
1	03-JUN-2011	V01	N
2	28-NOV-2011	V01	PC8329 - MARKED 'WOOFER SHUTDOWN' CIRCUIT
3			PARTS AS DNS. - ML
4	19-DEC-2011	V02	PC8358 - YS#4100 XLR changed to YS#4135. - ML
5			Changed R65/R67 from YS#6459 to YS#5124. - ML
6			Renamed R65/R67 to ZD65/ZD67. - ML
7			Changed R39/R40 from YS#6123 to YS#6116. - ML
8			PC8313 - C44 moved away from U9. - ML
9			Force updated large PSU caps with slots. - ML
10	07-MAY-2012	.	PC8447 - Changed C43 from 5216 to 5212. - ML
11	12-JUL-2012		PC8458 - Changed pot 4434 to 4459. - ML
12	27-AUG-2013		PC8519 - Several value changes. See PC. - ML
13	09-FEB-2015	V03	PC8734: D30 and D31 added to U9 , U10 regulators.

POTENTIOMETERS AND KNOBS

M1449 - POTS LIST
MODEL(S):- PSA1S
REF	FUNCTION	PART# KNOB		STYLE
P1	Level	4432	8653	P32
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
B	F	P	K	N
R	F	P	K	N

"STYLE_P32"

LEADS & PINS REFERENCE

MC33079P (YS#6804) TL074CN (YS#6889)

LM13600N (YS#6745)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

2N5401 (YS#5108) 2N5551 (YS#5107)
MPSA06 (YS#5103) MPSA13 (YS#5105)

E B C TO-92

BC560C (YS#5102)

C B E TO-92

TL072CP (YS#6882)

Yorkville

Product PSA1S
ECO	PCB# M144944	of
Date: Wed Matype:2035	V03
Filename: M1449V03sch.sch2006

A-1214 Power Amplifier YS#9702

Important!

This module is not repairable

In case of failure it needs to be replaced.

Please order Yorkville Sound part # 9702

A-1014 Amplifier Pinout

Pin 1: Vbus Pin 2: Vbus Pin 3: Ground Pin 4: Ground Pin 5: +15 Vdc Pin 6: -15 Vdc Pin 7: +5Vdc Pin 8: -5Vdc Pin 9: Ground Pin 1: Ground Pin 2: Audio In + Pin 3: Audio In - Pin 4: Ground Pin 5: +15 Vdc Pin 6: -15 Vdc Pin 7: Ground Pin 8: Current Monitor Pin 9: Temperature Monitor Pin 10: Protect Pin 11: Disable Pin 12: Clip Pin 13: +5 Vdc Pin 14: -5 Vdc

SEE LAYOUT DOCUMENTATION

PSA1S

SEE LAYOUT DIAGRAM

V03M1 PRODUCTION NOTES

1. RTV must be applied to the following caps: C22, C23, C24, C25, C26, C28, C36, C37, C50.
2. Apply RTV between C22 and C23 as well as between C24 and C25.
3. RTV must be applied to inductor L1.
4. Apply RTV between C53 and R102 and bend C53 over R102 as in picture.
5. Place U10 and U12 aligned on the SIL pad. No shorts to the heatsink are allowed.
6. Mount the TO-220 retaining spring as per the diagram below: NOTE: NUT IS ON TOP!

8841 3977 - Yellow spring 8581 TO220 parts 4022 - Sil pad Inner heatsink Outer heatsink PCB 8833 screw

160V 23d16L 01 SMH 160V 23d16L 01 SMH 160V 23d16L 01 SMH 160V 23d16L 01 SMH 160V 23d16L 01 SMH 160V 23d16L 01 SMH 160V 23d15L 01 SMH 160V 23d15L 01 SMH 160V 23d15L 01 SMH 160V 23d15L 01 SMH 160V 23d15L 01 SMH 160V 23d15L 01 SMH 150V 23d15L 01 SMH 150V 23d15L 01 SMH 150V 23d15L 01 SMH 150V 23d15L 01 SMH 150V 23d15L 01 SMH 150V 23d15L

Close-up of a green printed circuit board with white connectors and electronic components (no readable text or symbols)

SEE LAYOUT DIAGRAM

LEADS & PINS REFERENCE

2N5401 (YS#5108)

2N5551 (YS#5107)

MPSA06 (YS#5103)

MPSA13 (YS#5105)

E B C

TO-92

LM13600N (YS#6745)

MC33079P (YS#6804)

TL074CN (YS#6889)

BC560C (YS#5102)

C EB

TO-92

TL072CP (YS#6882)

POTENTIOMETERS AND KNOBS

M1449 - POTS LIST
MODEL(S):- PSA1S
	FUNCTION	RNOB	EF	STYLE
P1	LEVEL	432	8653	P32
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
B	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N
R	F	P	K	N

"STYLE P32"

M1449 PCB HISTORY
MODEL(S):- PSA1S
#	DATE	VER#	DESCRIPTION OF CHANGE
1	03-JUN-2011	V01	N
2	28-NOV-2011	V01	PC8329 - MARKED 'WOOFER SHUTDOWN' CIRCUIT PARTS AS DNS. - ML
3
4	19-DEC-2011	V02	PC8358 - YS#4100 XLR changed to YS#4135. - ML
5			Changed R65/R67 from YS#6459 to YS#5124. - ML
6			Renamed R65/R67 to ZD65/ZD67. - ML
7			Changed R39/R40 from YS#6123 to YS#6116. - ML
8			PC8313 - C44 moved away from U9. - ML
9			Force updated large PSU caps with slots. - ML
10	07-MAY-2012		PC8447 - Changed C43 from 5216 to 5212. - ML
11	12-JUL-2012		PC8458 - Changed pot 4434 to 4459. - ML
12	27-AUG-2013		PC8519 - Several value changes. See PC. - ML
13	09-FEB-2015	V03	PC8734: D30 and D31 added to U9, U10 regulators.

A-1214 Power Amplifier YS#9702

Important!

This module is not repairable

In case of failure it needs to be replaced.

Please order Yorkville Sound part # 9702

A-1014 Amplifier Pinout

Pin 1: Vbus Pin 2: Vbus Pin 3: Ground Pin 4: Ground Pin 5: +15 Vdc Pin 6: -15 Vdc Pin 7: +5Vdc Pin 8: -5Vdc Pin 9: Ground Pin 1: Ground Pin 2: Audio In + Pin 3: Audio In - Pin 4: Ground Pin 5: +15 Vdc Pin 6: -15 Vdc Pin 7: Ground Pin 1: Output + Pin 2: Ground Pin 3: Output - Pin 1: Vbus Pin 2: Vbus Pin 3: Ground Pin 4: Ground Pin 5: +15Vdc Pin 6: -15 Vdc Pin 7: +5 Vdc Pin 8: -5 Vdc Pin 9: Ground Pin 8: Current Monitor Pin 9: Temperature Monitor Pin 10: Protect Pin 11: Disable Pin 12: Clip Pin 13: +5 Vdc Pin 14: -5 Vdc

graph TD
    subgraph To Power Supply
        A["To Power Supply"] --> B["To Power Amp A"]
        B --> C["To Power Amp A output"]
        C --> D["To Speaker A"]
        C --> E["To Speaker B"]
        C --> F["To Power Amp B"]
    end

    subgraph To Power Amp A Input
        G["To Power Amp A Input"] --> H["To Power Amp B Input"]
    end

    subgraph To Power Amp B Input
        I["To Power Amp B Input"] --> J["To Power Amp B output"]
    end

    K1["To Input Board"] --> L1["To Input Board"]
    L1 --> M1["To Input Board"]
    M1 --> N1["To Input Board"]
    N1 --> O1["To Input Board"]
    O1 --> P1["To Input Board"]
    P1 --> Q1["To Input Board"]
    Q1 --> R1["To Input Board"]
    R1 --> S1["To Input Board"]
    S1 --> T1["To Input Board"]
    T1 --> U1["To Input Board"]
    U1 --> V1["To Input Board"]
    V1 --> W1["To Input Board"]
    W1 --> X1["To Input Board"]
    X1 --> Y1["To Input Board"]
    Y1 --> Z1["To Input Board"]
    Z1 --> AA1["To Input Board"]
    AA1 --> AB1["To Input Board"]
    AB1 --> AC1["To Input Board"]
    AC1 --> AD1["To Input Board"]
    AD1 --> AE1["To Input Board"]
    AE1 --> AF1["To Input Board"]
    AF1 --> AG1["To Input Board"]
    AG1 --> AH1["To Input Board"]
    AH1 --> AI1["To Input Board"]
    AI1 --> AJ1["To Input Board"]
    AJ1 --> AK1["To Input Board"]
    AK1 --> AL1["To Input Board"]
    AL1 --> AM1["To Input Board"]
    AM1 --> AN1["To Input Board"]
    AN1 --> AO1["To Input Board"]
    AO1 --> AP1["To Input Board"]
    AP1 --> AQ1["To Input Board"]
    AQ1 --> AR1["To Input Board"]
    AR1 --> AS1["To Input Board"]
    AS1 --> AT1["To Input Board"]
    AT1 --> AU["To Input Board"]
    AU --> AV1["To Input Board"]
    AV1 --> AW1["To Input Board"]
    AW1 --> AX1["To Input Board"]
    AX1 --> AY1["To Input Board"]
    AY1 --> AZ1["To Input Board"]
    AZ1 --> BA1["To Input Board"]
    BA1 --> BB1["To Input Board"]
    BB1 --> BC1["To Input Board"]
    BC1 --> BD1["To Input Board"]
    BD1 --> BE1["To Input Board"]
    BE1 --> BF1["To Input Board"]
    BF1 --> BG1["To Input Board"]
    BG1 --> BH1["To Input Board"]
    BH1 --> BI1["To Input Board"]
    BI1 --> BJ1["To Input Board"]
    BJ1 --> BK1["To Input Board"]
    BK1 --> BL1["To Input Board"]
    BL1 --> BM1["To Input Board"]
    BM1 --> BN1["To Input Board"]
    BN1 --> BO1["To Input Board"]
    BO1 --> BP1["To Input Board"]
    BP1 --> BQ1["To Input Board"]
    BQ1 --> BR1["To Input Board"]
    BR1 --> BS1["To Input Board"]
    BS1 --> BT1["To Input Board"]
    BT1 --> BU1["To Input Board"]
    BU1 --> BV1["To Input Board"]
    BV1 --> BW1["To Input Board"]

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	27-MAR-2019	V01		RELEASE FOR PRODUCTION
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10

POTENTIOMETERS AND KNOBS

POTENTIOMETERS/SWITCHES AND KNOBS
REF	FUNCTION	POT/SW YS#	STYLE	KNOB#

PINOUT DIAGRAMS

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

Design Information And History
PSA15
N 1421 175mm	CYCR PMU	EIL PM-21
PMV	PML PTPMAGPTC CC		EIL PM-2022

POWER SUPPLY 4067 R7B 100K0 T537 Q1B 10N 1K0 R3B R6B C1B 1 W6 SPK B 4227 4227 Amp B Out 4151 R5B R4B 200 W8 S/N LABEL R7A 100K0 Q1A 7K07 10N 1K0 R3A C1A R4A R5A ORC55R96R95 4151 W5 SPK A W7 Yorkville © 2019 D4 D6 D5 S3D S3D S3D S3D S3D S3D D1 D2 To Input Board D3 W10 2359 1 2359 1 W1 Amp B input 2372 W3 R8 1K0 C2 10N Q2 (Z665) W2 Amp A input 2372 To Input Board 2 R2 681R 681R PSA1S M1450 V01

PSA1S M1450 V01

PCB ASSEMBLY DOCUMENTATION

SPECIAL PRODUCTION NOTES

1. Use pizza cutter to separate board from panel where possible.

I1450 V01 PSA1S M1450 V01 AMP B input 5 Amp A input To Input Board B To Input Board B To Input Board D Vereille 2019 D4 0000000 0000000 0000000 0000000 0000000 0000000 0000000 0000000 0000000 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8 M8

PCB HARDWARE

SCREWS AND BOLTS

NUTS

STANDOFFS

MISCELLANEOUS

Assembly Documentation

PSA15

N1422.175ml CYPCR, PMU 2ML Pm/6:21

2016年

THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD.

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	27-MAR-2019	V01		RELEASE FOR PRODUCTION
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10

POTENTIOMETERS AND KNOBS

POTENTIOMETERS/SWITCHES AND KNOBS
REF	FUNCTION	POT/SW YS#	STYLE	KNOB#

PINOUT DIAGRAMS

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

Design Information And History
PSA15
N 1421 175mm	CYCR PMU	EIL PM-21
PMV	PML PTPMAGPTC CC		EIL PM-2022

POWER SUPPLY TO POWER AMP PCB AC IN 120V 120V 240V XFMR-SEC-HI XFMR-SEC CLASSIC END AC BOARD CHAESIS CND POWER P65ND 120V 120V 240V SILENT 110V ES13P +80V ES13P +80V ES13P +80V FS22S 110V ES13P +80V ES13P +80V ES13P +80V FS22S 110V ES13P +80V ES13P +80V FS22S 110V ES13P +80V ES13P +80V FS22S 110V ES13P +80V ES13P +80V FS22S 110V ES13P +80V ES13P +8V

SUBWOOFER AMP +/-15V_MOD SILENT ON/OFF FROM INPUT PCB YS#3114 Variant name not interpreted Yorkville Woolfer Amp E-15V-PS15P/ES18P/ES21P/PSA15/PSA2S C212 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C200 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C201 C202 C202 C202 C202 C202 C202 C202 C202 C202 C202 C202 C202 C202 C202 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C203 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C204 C205 C205 C205 C205 C205 C205 C205 C205 C205 C205 C205 C205 C205 C205 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206 C206

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	27-OCT-2016	V01	RELEASED	FOR PRODUCTION
2	07-JUL-2017	V01	9077	REMOVE S/L PADS YS#= 3797 AND CHANGE SCREW 8741 TO 8871
3	2-NOV-2017	V01	9114	Changed R225 and R249 from 22R(YS#7930) to 1CR (YS#7852)
4				Changed D203A and D206A from BAT54 (YS#7944) to BAT750 (YS#9126)
5				Change R219 from c70R (YS#7656) to 475R (YS#7673)
6				Change R264 from 1K62 (YS#8137) to 1K4 (YS#9107)
7				Add 12K1 0003 resistor (YS#7761) between pin 3 and pin 4 of U201
8				For M1693 PCB Only:
9				Change Q203A and Q205A from IRGP50B60PDPbF (YS#2385) to
10				IRGP50B60PD1PbF (YS#2496)
11	10-NOV-2017	V01	9134	For M1692 PCB Only:
12				Change Q203A and Q205A from IRGP50B60PDPbF (YS#2385) to
13				IRGP50B60PD1PbF (YS#2496)
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	26-NOV-2017	V02	9114	Add two 150pF 100V capacitors (YS#5902) between PS, GND and pin 1 and pin 4 of W402
2				Change C300 connection from before L300 to after L300
3	20-DEC-2017	V02		Added M1690(ES21P) and M1691(ES12P) to board
4	18-DEC-2017	V02		Added 5 test points for Test & Repair
5	22-DEC-2017	V02		V02 Released
6	02-APR-2018	.	9195	Replace screw #8761 (zinc) with #8835 (lin)
7	01-SEP-2018	V03	.	X8024 Board - De-Exed
8				Added C316, L301, and C315 for EMI Improvements
9	09-OCT-2018	V03	9284	V03 Released
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13

POTENTIOMETERS AND KNOBS

POTENTIOMETERS AND KNOBS
REF	FUNCTION	POT#	STYLE	KNOB#

PINOUT DIAGRAMS

CASES AND PINS RS218415 NUV7815 NUV7915 IRCP50B60PDPBF IRCP35B60PDPBF F8895 F8956 F8957 G D S R2496 R2307

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

Design Information And History
Acqnsy: ES12P/ES15P/ES18P/ES21P/PSA1S/PSA2S
AOSR	Rank 1/03	SRL Rank 01	Rank 2 Of 3
Mcsrsx	Rank 2/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03	Rank 2/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/04/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03 /03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/03/

Into Wave M1694-PSA1S V03 1/2 255UH L200 6674 M1694-PSA1S V03 1/2 2385 + 4181 RCP50B0PD 2385 + 4181 RGPS30XPD 6856 NM781FPA 6857 NM791FPA BlankSize - 261mmX222mm(10276X8740) TO INPUT BOARD 5972 680N 400V 5951 3U3 340V 5972 680N 400V 5221 5962 2u2 140V TO SPK W402 C402 SCK 4215 486-UH L401 C311 2200U 50V 58875887 2200U 50V Yorkville © 2017 C312 C316 C315 4151 5935 3300U 200V 5935 3300U 200V W307 W304 6852 45A 600V 5935 3300U 200V 5935 3300U 200V D900 W306 W301 L301 C305 5266 680N 250V 4243 AC IN 19302 C320 4244 120N 250V L300 3817 1500UH 4243 C315 5242 100V C302 5827 3128 15UH W306 W301 C305 4243 M1694-PSA1S V03 1/2 M1694-PSA1S V03 1/2

PCB ASSEMBLY DOCUMENTATION

MOUNTING HARDWARE & INSTRUCTIONS FOR HEAT SPREADER ZC1611:

1- First install #8742 screw to align heatspreader ZC1611
2- Install all devices on Heat Spreader
3- Install #8800 and #8835 for grounding. Nut up.

Ys#: 8742 DESC: 4-40X38 PAN YS#: ZC1611 DESC: HEAT SPREADER YS#: 8800 DESC: 8-32 KEPS NUT YS#: 8835 DESC: 0-32X1/2 PAN INSERT FROM BOTTOM

MOUNTING HARDWARE FOR U302/U303 AND Q203/Q205:

BOTTOM VIEW:
MOUNTING HARDWARE FOR D300:

TOP VIEW:

Close-up of a green circuit board with a black electronic component and two yellow arrows pointing to features (no readable text or symbols)

YS#: 8800 DESG: \$32 KERS NUT
DESC: 6-32 REPS MOT
D300

BOTTOM VIEW:
YS#: 8837 DESC: 6-32X1/2 PAN NO WASHER NEEDED

Close-up of a green printed circuit board with soldered components and a white tool inserted (no visible text or symbols)

RTV INSTRUCTIONS:
ADD RTV BETWEEN:
C311, C312, C313 and C314 AFTER WAVE SOLDER

ADD RIV 250V OEA OE-UK

10M25KJ 10W25KJ

Add RTV UNDER R303 AND R304 on the heatspreader
IMPORTANT: Keep the resistors away from the nearby capacitors (C312, C313)

Assembly Documentation
Annuity: ES12P/ES15P/ES18P/ES21P/PSA18/PSA28
VOC ECLAr
Ranet | 70/2008/03/15/08
2. 0: Smart Control: Home 3
The following table is in English.

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY POTENTIOMETERS AND KNOBS

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	27-OCT-2015	V01		RELEASED FOR PRODUCTION
2	07-JUL-2017	V01	9077	REMOVE SIL PAOS YS# 3797 AND CHANGE SCREW 8741 TO 8871
3	2-NOV-2017	V01	9114	Changed R225 and R249 from 22R(YS#7935) to 10R (YS#1752)Changed D203A and D206A from BAT54 (YS#7944) in BAT750 (YS#9106)Change R219 from 470R (YS#7856) to 475R (YS#7673)Change R264 from 1K82 (YS#6137) to 1K4 (YS#9107)Add 12K1 0623 resistor (YS#7761) between pin 3 and pin 4 of U201For M1693 PCB Only:Change Q203A and Q205A from IRGP50B60PDPbF (YS#2385) to IRGP50B60PD1PbF (YS#2495)For M1692 PCB Only:Change Q203A and Q205A from IRGP50B60PDPbF (YS#2385) to IRGP50B60PD1PbF (YS#2495)
4
5
6
7
8
9
10
11	10-NOV-2017	V01	9134
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	26-NOV-2017	V02	9114	Add two 150pF 100V capacitors (YS#5962) between PS, GND and pin 1 and pin 4 of W402Change C309 connection from before L300 to after L300Added M1890(ES21P) and M1691(ES12P) in boardAdded 5 test points for Test & RepairV02 ReleasedReplace screw #8761 (zinc) with #8835 (lin)X6024 Board - De-ExedAdded C316, L301, and C315 for EMI ImprovementsV03 ReleasedChanged W301, W306 to YesPart# 4243 and W302 to YesPart# 4244
2
3	20-DEC-2017	V02
4	15-DEC-2017	V02
5	22-DEC-2017	V02
6	02-APR-2018		8196
7	01-SEP-2018	V03
8		V03	9284
9	00-OCT-2018	V03
10	01-FEB-2019		8277
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13

POTENTIOMETERS AND KNOBS
REF	FUNCTION	POT#	STYLE	KNOB#

PINOUT DIAGRAMS

CASES AND PINS IRG5216448 NLM7915 NLM7915 IRGP08060DPBF IRGP35860DPBF A0456 A2307

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

Design Information And History

ES12P/ES15P/ES18P/ES21P/PSA18/PSA28

VOC ENL Bank 01 Street OYSCB: New C AerNet Pte 2019A00/24 12:30 Day Pte: VCEB

Electrical schematic diagram of a power supply circuit with labeled components, ICs, and wiring connections

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	15-SEP-2014	V01
2	07-JUL-2017	V02	9039	Add M1698-PSA1S and M1699-PSA2S
3	14-JUN-2018	V02	9193	R18 from 348k #7687 to 200k #7685; R32 from 4k7 #7680 to 6k2 #6274;
4				R33 from 27k4 #7638 to 20k5 #7634
5	10-JUL-2018		6997	Add RTV to parts C18, C21, C9 and PTC1
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13

POTENTIOMETERS AND KNOBS

POTENTIOMETERS AND KNOBS
REF	FUNCTION	POT#	STYLE	KNOB#
P1	LEVEL	2339	P34	8653

PINOUT DIAGRAMS

CASES AND PINS "STYLE_PIN" TL072 LM103000000000000 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V M10300000

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

Yorkville	Section: Design Information And History
	Product: PS SUBS INPUT BOARD
	PCD# X3022	Pin A	Pin B	CML Pin C	Pin D	Pin E	Pin F
	Mn/Min	Pin 1	Pin 2	Pin 3	Pin 4	Pin 5	Pin 6

TO POWER AMP 2344 1 9 8 7 6 5 4 3 2 1 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79 -80 -81 -82 -83 -84 -85 -86 -87 -88 -89 -90 -91 -92 -93 -94 -95 -96 -97 -98 -99 -100 -101 -102 -103 -104 -105 -106 -107 -108 -109 -110 -111 -112 -113 -114 -115 -116 -117 -118 -119 -120 -121 -122 -123 -124 -125 -126 -127 -128 -129 -130 -131 -132 -133 -134 -135 -136 -137 -138 -139 -140 -141 -142 -143 -144 -145 -146 -147 -148 -149 -150 -151 -152 -153 -154 -155 -156 -157 -158 -159 -160 -161 -162 -163 -164 -165 -166 -167 -168 -169 -170 -171 -172 -173 -174 -175 -176 -177 -178 -179 -180 -181 -182 -183 -184 -185 -186 -187 -188 -189 -190 -191 -192 -193 -194 -195 -196 -197 -198 -199 -200

PSA1S-M1698V02

PCB ASSEMBLY DOCUMENTATION

SPECIAL PRODUCTION NOTES

1. THIS BOARD IS FOR :

M1596 FOR PS12S

M1597 FOR PS15S

M1598 FOR PS18S

M1698 FOR PSA1S

M1699 FOR PSA2S

SEE SMT JUMPERS TO IDENTIFY

1. ADD RTV TO COMPONENTS WHERE INDICATED

PCB HARDWARE

THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD.

Section Assembly Documentation

Product: PS SUBS

0024 X8022

八、表决

[Table 1]

Autoculture Service Tep. DKK 03/12/2013

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY POTENTIOMETERS AND KNOBS

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	15-SEP-2014	V01
2	07-JUL-2017	V02	9039	Add M1698-PSA1S and M1699-PSA2S
3	14-JUN-2018	V02	9193	These changes for M1596 - PS12S Only... R18 from 348k #7687 to 200k #7685;R33 from 27k4 (#7636 to 20k5 #7634, R32 from 4K7 #7680 to 6K2 #8274;
4
5	10-JUL-2018		8997	Add RTV to parts C18, C21, C9 and PTC1
6	23-JUL-2019		9300	All changes for PC300 are for M1699 - PSA2S only
7				R33 - from 27K4 (#7536) to 20K5 (#7634) R41 - from 2K74 (#7745) to 4K75 (#7642)
8				R73 - from 1K62 (#8137) to 2K0 (#7675) R86 - from 2K0 (#7576) to 6K98 (#7580)
9				R111 - from 470R (#7656) to 348R (#7672) R122 - from 2K32 (#7632) to 2K74 (#7745)
10				C36 - from 150n 63V (#5212) to 47n 63V (#5224)
11				C37 - from 150n 63V (#5212) to 47n 63V (#5224)
12				from 348K (#7687) to 274K (#7686) R32 - from 4K7 (#7680) to 6K2 (#8274)
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9

POTENTIOMETERS AND KNOBS
REF	FUNCTION	POT#	STYLE	KNOB#
P1	LEVEL	2539	P34	8653

PINOUT DIAGRAMS

CASES AND PINS STYLE_P54 LW72 M2000X LW1300X

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

POWER AC IN 120V 240V XFMR-SEC-HI XFMR-SEC TO POWER AMP PCB CHASSIS GND AC BOARD POWER AC IN BLK 120V 240V 120V 240V 120V 240V 120V 240V 120V 240V 120V 240V 120V 240V 120V 240V 120V 240V 120V 240V 120V 240

Critical Safety Components

This symbol is placed next to
Safety Critical Components

S### Power Supply
M1824-PSAIS
MILS245560010278-3027 | NCM R=★引
Date: 03/10/24 Balance: Sep(5)10:00

SUBWOOFER AMP +/-15V_MOD +15V_SCKD VCCFND LVND PSND VCCFND SILENT ON/OFF FROM INPUT PCB C239 170_V_LS C206 170_V_LS C235 170_V_LS C204 170_V_LS C180 170_V_LS C170 170_V_LS C160 170_V_LS C150 170_V_LS C140 170_V_LS C130 170_V_LS C120 170_V_LS C110 170_V_LS C100 170_V_LS C90 170_V_LS C80 170_V_LS C70 170_V_LS C60 170_V_LS C50 170_V_LS C40 170_V_LS C30 170_V_LS C20 170_V_LS C10 170_V_LS C00 170_V_LS C-15V_MOD1 -15V_MOD2 -15V_MOD3 -15V_MOD4 -15V_MOD5 -15V_MOD6 -15V_MOD7 -15V_MOD8 -15V_MOD9 -15V_MOD10 -15V_MOD11 -15V_MOD12 -15V_MOD13 -15V_MOD14 -15V_MOD15 -15V_MOD16 -15V_MOD17 -15V_MOD18 -15V_MOD19 -15V_MOD20 -15V_MOD21 -15V_MOD22 -15V_MOD23 -15V_MOD24 -15V_MOD25 -15V_MOD26 -15V_MOD27 -15V_MOD28 -15V_MOD29 -15V_MOD30 -15V_MOD31 -15V_MOD32 -15V_MOD33 -15V_MOD34 -15V_MOD35 -15V_MOD36 -15V_MOD37 -15V_MOD38 -15V_MOD39 -15V_MOD40 -15V_MOD41 -15V_MOD42 -15V_MOD43 -15V_MOD44 -15V_MOD45 -15V_MOD46 -15V_MOD47 -15V_MOD48 -15V_MOD49 -15V_MOD50 -15V_MOD51 -15V_MOD52 -15V_MOD53 -15V_MOD54 -15V_MOD55 -15V_MOD56 -15V_MOD57 -15V_MOD58 -15V_MOD59 -15V_MOD60 -15V_MOD61 -15V_MOD62 -15V_MOD63 -15V_MOD64 -15V_MOD65 -15V_MOD66 -15V_MOD67 -15V_MOD68 -15V_MOD69 -15V_MOD70 -15V_MOD71 -15V_MOD72 -15V_MOD73 -15V_MOD74 -15V_MOD75 -15V_MOD76 -15V_MOD77 -15V_MOD78 -15V_MOD79 -15V_MOD80 -15V_MOD81 -15V_MOD82 -15V_MOD83 -15V_MOD84 -15V_MOD85 -15V_MOD86 -15V_MOD87 -15V_MOD88 -15V_MOD89 -15V_MOD90 -15V_MOD91 -15V_MOD92 -15V_MOD93 -15V_MOD94 -15V_MOD95 -15V_MOD96 -15V_MOD97 -15V_MOD98 -15V_MOD99 -15V_MODA00/SAI 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.2kΩ 2.

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY POTENTIOMETERS AND KNOBS

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	08-May-2019	V01		New EMC compliant boardFOR ES12P-E821P and PSA2S: Replace R242 #5110 0R04 2Wwith #5142 0R02 5W and DNS R243
2	22-Aug-2019		9440
3
4	23-Sept-2019	V02	9454	REPLACE D306 AND D309 FROM YS#8814 ES1J TO YS#9159 SMAZ18 18V ZENER
5			9456
6	27-Oct-2020		9411	Replaced #2496 with #2321
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10

PINOUT DIAGRAMS

CASES AND PINS IRG50806DDP8F IRGP050806DDP8F IRGP350806DDP8F IRG50806DDP8F IRGP350806DDP8F IRG50806DDP8F IRGP350806DDP8F IRG50806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8 IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350807 IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP350806DDP8F IRGP3508042971 IRGP3508042972 IRGP3508042973 IRGP3508042974 IRGP3508042975 IRGP3508042976 IRGP3508042977 IRGP3508042978 IRGP3508042979 IRGP350804297A IRGP350804297B IRGP350804297C IRGP350804297D IRGP350804297E IRGP350804297F IRGP350804297G IRGP350804297H IRGP350804297I IRGP350804297J IRGP350804297K IRGP350804297L IRGP350804297M IRGP350804297N IRGP350804297O IRGP350804297P IRGP350804297Q IRGP350804297R IRGP350804297S IRGP350804297T IRGP350804297U IRGP350804297V IRGP350804297W IRGP350804297X IRGP350804297Y IRGP350804297Z IRGP350804297A IRGP350804297B IRGP350804297C IRGP350804297D IRGP350804297E IRGP350804297F IRGP350804297G IRGP350806DDPBF IRGP350806DDPBF IRGP350806DDPBF IRGP350806DDPBF IRGP350806DDPBF IRGP350806DDPBF IRGP350816DDPBF IRGP351116DDPBF IRGP351116DDPBF IRGP351116DDPBF IRGP351116DDPBF IRGP351116DDPBF IRGP351116DDPBF IRGP351116DDPBF IRGP351116DDPBF IRGP351116DDDFFPF

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

Design Information And History ES12P/ES15P/ES10P/ES21P/PSA1S/PSA2S N 1524 2.35mm D*25P/MW02 EAL P### 21 E###

Into Wave BlankSize - 261mmX222mm (10276X8740) Yorkville © 2019 6674 255UH 680N 400V 5986 10U 600V 4181 + 2385 IRGP50B60PD1 4181 + 2385 IRGP50B60PD1 680N 5972 400V 4181 + 2385 IRGP50B60PD1 6857 NUM7915FA 6856 NUM7815FA ZC1611 M1824/02 PSA1S S/N LABEL PSA1S M1824/02 1/2 #8742 to Align ZC1611 HeatSpreader

PCB ASSEMBLY DOCUMENTATION

MOUNTING HARDWARE & INSTRUCTIONS FOR HEAT SPREADER ZC1611:

1- First install #8742 screw to align heatspreader ZC1611
2- Install all devices on Heat Spreader
3- Install #8800 and #8835 for grounding. Nut up.

YS#: 8742 DESC: 4-40X3/6 TT Pan YS#: 8800 DESC: 8-32 KEPS NUT YS#: 8835 DESC: 8-32X1/2 PAN INSERT FROM BOTTOM

MOUNTING HARDWARE FOR U302/U303 AND Q203/Q205:

TOP VIEW:

US03 US02 QZ05 QZ03 YS#: 8871 DESC: 4-40X58 PAN YS#: 3501 DESC: COMP WASHER 2 X YS#: 8921 DESC: FLAT WASHER YS#: Z1611 DESC: HEAT SPREADER YS#: 8902 DESC: 4-40X3/4 PAN YS#: 8485 DESC: #6 ZINC WASHER YS#: 4181 DESC: CERAMIC INSULATOR ADD GOOP ON BOTH SIDES OF CERAMIC INSULATORS IMPORTANT!

BOTTOM VIEW:

Four circular electronic components on a green circuit board, each with an orange arrow pointing to its top edge (no text or symbols visible)

MOUNTING HARDWARE FOR D300:

TOP VIEW:

Close-up of a green circuit board with a black electronic component and orange arrows pointing to features (no readable text or symbols)

Clip all 4 leads short on D300:
BOTTOM VIEW:

YS#: 8800 DESC: 6-32 KEPS NUT

D300

YS#: 8837 DESC: 6-32X1/2 PAN NO WASHER NEEDED

Close-up of a green printed circuit board with soldered components and a small black component (no visible text or symbols)

RTV INSTRUCTIONS:

ADD RTV BETWEEN: C311, C312, C313 and C314 AFTER WAVE SOLDER

ADD RTV 250V 20mA CE-FU

1025KJ 10W25KJ

Add RTV UNDER R303 AND R304 on the heatspreader

IMPORTANT: Keep the resistors away from the nearby capacitors (C312, C313)

Assembly Documentation

ES12P/ES15P/ES10P/ES21P/PSA1S/PSA2S

N1524 2.35cm/DF1524.7mm0 DN Pn DN Pn DN Pn

Face Sable

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY POTENTIOMETERS AND KNOBS

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	08-May-2019	V01		New EMC compliant board
2	22-Aug-2019		9440	FOR ES12P-ES22P and PSA2S: Replace R242 #5110 0R04 2W with #5142 0R02 5W and DNS R243
3
4	23-Sept-2019	V02	9454	REPLACE D308 AND D308 FROM YS#8814 ES1J TO YS#8159 SMAZ18 18V ZENER
5			9456	R247 moved close to C250 to eliminate oscillation
6	27-Oct-2020		9411	Replaced #2498 with #2365
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13

PINOUT DIAGRAMS

CASES AND PINS IRS715445 NM7816 NM7816 IRGP0560DPBF IRGP3560DPBF I2666 I2666 I2657 V2496 V2307

CLIP XLIM TLIM +5V SUPPLY POWER LED W1 RAL GENSE PROGRAM HEADER CODEC GAIN AUX/AVI SPACK TO CHARGE +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5V SUPPLY +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5MΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V +5NΩ/V -100mA -100mA -100mA -100mA -100mA -100mA -100mA -100mA -100mA -100mA -100mA -100mA -100mA

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	14 MAR 2020	V01		RELEASE FOR PRODUCTION
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10

POTENTIOMETERS AND KNOBS

POTENTIOMETERS/SWITCHES AND KNOBS
REF	FUNCTION	POT/SW YSM	STYLE	KNOBM
P5	GAIN	2339	P34	8653C
S1	Speaker/Line Mode	3522	DPDT	8637

"STYLE_P32"

PINOUT DIAGRAMS

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

Design Information And History

PS12S / PS15S / PS10S / PSA1S / PSA2S

N1203 35cm(PTCSP.TwB) EIA Park

[1]

经S#:5021

Circuit board layout diagram with component labels, pin numbers, and technical specifications like 'P0S125' and 'P0S425'

PCB ASSEMBLY DOCUMENTATION

SPECIAL PRODUCTION NOTES

1. THIS BOARD IS FOR :

M1996 FOR PS12S

M1996 FOR PS15S

M1996 FOR PS18S

M1996 FOR PSA1S

M1996 FOR PSA2S

SEE MARKINGS TO IDENTIFY SOFTWARE VERSIONS

PCB HARDWARE

THIS SHEET CONTAINS SPECIAL PRODUCTION NOTES AND A LIST OF PCB HARDWARE PARTS REQUIRED FOR THE BUILD.

Assembly Documentation

PS125/PS15S/PS10S/PSA1S/PSA2S

N1200 2.35mm (OFTSAR.TM) EIA Park

[Unreadable]

P#A17004885 (32) (M)

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	14 MAR 2020	V01		RELEASE FOR PRODUCTION
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10

POTENTIOMETERS AND KNOBS

POTENTIOMETERS/SWITCHES AND KNOBS
REF	FUNCTION	POT/SW YSM	STYLE	KNOBM
P5	GAIN	2339	P34	8653C
S1	Speaker/Line Mode	3522	DPDT	8637

"STYLE_P32"

PINOUT DIAGRAMS

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

Design Information And History

PS12S / PS15S / PS10S / PSA1S / PSA2S

M1200 3.35cm (APR.R.Tw) EIA Park

2014

经S#:5021

POWER SUPPLY

TO POWER AMP PCB AC IN 120V OH-122U PEA13 CH-142U ES11P CH-142U ES18P CH-142U ES12P CH-142U PEA25 CH-142U ES21P 240V XFMR-SEC-HI XFMR-SEC CHASSIS GND AC 8CAND 120V PEA15 -20kV ES10F -25V ES16F -25V ES21F -25V ES25 -25V ES31F -25V ES37F -25V ES43F -25V ES49F -25V ES55F -25V ES61F -25V ES67F -25V ES73F -25V ES79F -25V ES85F -25V ES91F -25V ES97F -25V ES103F -25V ES109F -25V ES115F -25V ES121F -25V ES127F -25V ES133F -25V ES139F -25V ES145F -25V ES151F -25V ES157F -25V ES163F -25V ES169F -25V ES175F -25V ES181F -25V ES187F -25V ES193F -25V ES200F -25V ES207F -25V ES214F -25V ES221F -25V ES228F -25V ES235F -25V ES242F -25V ES249F -25V ES256F -25V ES263F -25V ES270F -25V ES277F -25V ES284F -25V ES291F -25V ES298F -25V ES305F -25V ES312F -25V ES319F -25V ES326F -25V ES333F -25V ES340F -25V ES347F -25V ES354F -25V ES361F -25V ES368F -25V ES375F -25V ES382F -25V ES389F -25V ES396F -25V ES403F -25V ES409F -25V ES416F -25V ES423F -25V ES430F -25V ES437F -25V ES444F -25V ES451F -25V ES458F -25V ES465F -25V ES472F -25V ES479F -25V ES486F -25V ES493F -25V ES499F -25V ES506F -25V ES513F -25V ES519F -25V ES526F -25V ES533F -25V ES539F -25V ES546F -25V ES553F -25V ES560F -25V ES567F -25V ES574F -25V ES581F -25V ES587F -25V ES603F -25V ES609F -25V ES616F -25V ES623F -25V ES630F -25V ES637F -25V ES644F -25V ES649F -25V ES666F -25V ES673F -25V ES679F -25V ES686F -25V ES693F -25V ES700F

Critical Safety Components
This symbol is placed next to Safety Critical Components

SUBWOOFER AMP +/-15V_MOD SILENT ON/OFF FROM INPUT PCB YS#3114 WOOFER AMP Anastatic PSA1S Yorkville M2127 VST G. Burquity/Power Input K2027 K2028 K2029 K2030 K2031 K2032 K2033 K2034 K2035 K2036 K2037 K2038 K2039 K2040 K2041 K2042 K2043 K2044 K2045 K2046 K2047 K2048 K2049 K2050 K2051 K2052 K2053 K2054 K2055 K2056 K2057 K2058 K2059 K2060 K2061 K2062 K2063 K2064 K2065 K2066 K2067 K2068 K2069 K2070 K2071 K2072 K2073 K2074 K2075 K2076 K2077 K2078 K2079 K2080 K2081 K2082 K2083 K2084 K2085 K2086 K2087 K2088 K2089 K2090 K2091 K2092 K2093 K2094 K2095 K2096 K2097 K2098 K2099 K2100

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY POTENTIOMETERS AND KNOBS

#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1	23-FEB-2022	V01		RELEASED FOR PRODUCTION
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#	DATE	VER#	PC#	DESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10

PINOUT DIAGRAMS

CASES AND PINS NLM7015 NLM7015 IRGP50B50PDPEF IRGP50B50PDPEF V9856 V6657 TO-47A5 G D S V2495 V2307

THIS SHEET CONTAINS A CHANGE HISTORY LOG. A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

M2127-PSA1S

Into Wave 275UH 6674 BlankSize - 261mmX222mm (10276X8740) #8835+ #8800 ZC1611 #8742 to Align ZC1611 HeatSpreader M2127V01 PSA1S S/N LABEL PSA1S M2127V01 1/2

PCB ASSEMBLY DOCUMENTATION

MOUNTING HARDWARE & INSTRUCTIONS FOR HEAT SPREADER ZC1611:

1- First install #8742 screw to align heatspreader ZC1611
2- Install all devices on Heat Spreader
3- Install #8800 and #8835 for grounding. Nut up.

YS#: 8800 DESC: 6-32 KEPS NUT YS#: 8835 DESC: 6-32X12 PAN INSERT FROM BOTTOM YS#: 8742 DESC: 4-40X3/8 TT Pan

MOUNTING HARDWARE FOR U302/U303 AND Q203/Q205:

TOP VIEW: BOTTOM VIEW: U303 U302 Q205 Q203

YS#: 8871 DESC: 4-40X5/8 PAN YS#: 3501 DESC: COMP WASHER 2 X YS#: 8921 DESC: FLAT WASHER YS#: Z1611 DESC: HEAT SPREADER ADD GOOP ON BOTH SIDES OF CERAMIC INSULATORS YS#: 8902 DESC: 4-40X3/4 PAN YS#: 8465 DESC: #6 ZINC WASHER YS#: 4181 DESC: CERAMIC INSULATOR IMPORTANT!

YS#: 8701 DESC: 4-40 KEPS NUT

MOUNTING HARDWARE FOR D300:

TOP VIEW:

Close-up of a black electronic component with a threaded bolt and connector, mounted on a green circuit board (no visible text or symbols)

Clip all 4 leads short on D300:

YS#: 8800 DESC: 6-32 KEPS NUT

D300

YS#: 8837 DESC: 6-32X1/2 PAN NO WASHER NEEDED

BOTTOM VIEW:

Close-up of a green printed circuit board with soldered components and a black component inserted (no visible text or symbols)

RTV INSTRUCTIONS:

ADD RTV BETWEEN:

C311, C312, C313 and C314 AFTER WAVE SOLDER

ADD RIV 250V 250A CE-FU4

10KSZM01 10W25KJ

Add RTV UNDER R303 AND R304 on the heatspreader

IMPORTANT: Keep the resistors away from the nearby capacitors (C312, C313)

DESIGN HISTORY AND INFORMATION

CHANGE HISTORY

#		VERIDATDESCRIPTION OF CHANGE
1	23-FEB-2022		V01 RELEASED FOR PRODUCTION
2
3
4
5
6
7
8
9
10
11
12
13
#		VERIDATDESCRIPTION OF CHANGE
1
2
3
4
5
6
7
8
9
10
11
12
13
#		VERIDATDESCRIPTION OF CHANG
1
2
3
4
5
6
7
8
9
10
11
12
13

POTENTIOMETERS AND KNOBS

PINOUT DIAGRAMS

CASES AND PINS
1	NLM7815	NLM7915
2	10	10
3	#6885	#6885
4	#2486 A2307	IRGP50B60PDPBF IRGP50B60PDPBF

THIS SHEET CONTAINS A CHANGE HISTORY LOG, A LIST OF THE POTS & KNOBS AND A LEADS & PINS REFERENCE SECTION.

1. Input Level

Choose between line-level and speaker-level signals.

The Line-Level position is used when the PSA1s/ PSA2s is fed a line-level signal from a processor, an electronic crossover, an un-powered mixer, or the loop-through of a powered speaker cabinet. When using the line-level mode, using balanced 14 -inch (Tip, Ring, Sleeve) and/or XLR cables will reduce the unit's sensitivity to hum and buzz.

The Speaker Level position should be used when the PSA1s/ PSA2s is fed with a 14 -inch speaker cable from the output of an amplifier, a powered-mixer, or from the parallel connection on an un-powered speaker cabinet. For speaker level operation, connect the PSA1s/ PSA2s just like an ordinary speaker (in parallel using the loop-through jacks) along with the passive full-range loudspeakers.

2. Level Control

Adjusts the amount of bass added to the sound system. This control should be set by listening with a medium-level input signal (such that the limiter is not firing).

Note: It is not recommended to set this control at high levels since the limiter determines the output level. A setting at the center defent on the PSA1s/PSA2s Level control is the correct starting point when setting up a sound system. The defent is the setting that will give full power when the line input is used and the input signal is at a level of +3 dBV.

3. Input Jacks

Designed to make it easy to hook up the PSA1s/ PSA2s to almost any audio system with minimal hassle. 14 -inch and XLR inputs with Thru connections are supplied. The PSA1s/ PSA2s may be plugged in before or after a full-range loudspeaker, it does not alter the signal

Yorkville

PARALINE SERIES

PSA1S/PSA2S

to the daisy-chained (thru) loudspeakers and will not draw any power from the host amplifier/processor driving them. Also, note that an external crossover is not necessary when using the PSA1s/ PSA2s.

Note: the Thru jacks allow many PSA1s/PSA2s subwoofers to be connected in a chain (parallel). There is no practical limit to the number of PSA1s/PSA2s that may be connected together.

4. Protection

The PSA1s/ PSA2s has several internal protection mechanisms against over-current, over-excursion, clipping, and excessive average power output. In some cases, when protection is activated, the output will be cut off. In these cases, the power LED will blink, and the PSA1s/ PSA2s will attempt to restart itself. If the fault persists, you should take your PSA1s/ PSA2s to the nearest authorized service center for repair by a qualified service technician.

At high power levels when the limiter is operating, increasing the subwoofer level control will not increase the output. For the best results, set the system so that the limiter LED occasionally (a few times per second) lights up. The limiter is present in the circuit at all times to prevent

distortion and to prevent over- excursion of the speakers.

Note: The PSA1s/ PSA2s 'built-in stand mounting adapter can be used with the Yorkville SW-TUBEHD accessory to support either one or two of our PSA1 cabinets. The support tube can be used safely as long as the PSA1s/ PSA2s is on a flat, level surface.

WARNING: Larger or heavier cabinets should NOT be used!

CIP Limit Pwr Input Mode Line Spkr Level Min M ax Input (Link)

To get the full Owner's Manual please visit our website at

http://www.yorkville.com/manuals/ or, if you need a printed version call 905-837-8777

REAL Gear. REAL People. Canada Voice: [phone] Fax: [phone] U.S.A. Voice: [phone] Fax: [phone] www.yorkville.com Yorkville Sound 550 Granite Court Pickering, Ontario L1W-3Y8 CANADA Yorkville Sound Inc. 4625 Witmer Industrial Estate Niagara Falls, New York 14305 USA

1. Niveau d'Entrée

Black portable audio amplifier with hexagonal grille and logo, mounted on a wooden stand (no visible text or symbols)

Yorkville CADAULIE SERIES PRODUIT

Yorkville 5 6 4

7 8 9

1 1 12 1 PARALINE SERIES PSA18 WWW.TYRNEVILLE.COM

Coiled metallic cable with a small connector, no visible text or symbols

# Part# Description qty
Labeled Components
1	4459 _10K	B LIN 9MM DET HI TORQ P32 1
2	8653 LOW PROFILE POINTER AT 12 KNOB 1
3	9414SS 10-32X1 1/4 PAN QUAD SS MS B.O.&WAX 18
4	4063 1/4IN ISO JCK PCMT VT STER RT SWT 2
5	9970 RIGID CASTER 2
6	9419SS 1/4-20X11/4 SS TRUSS PH MS B.O.&WAX 16
7	4088 RECEPTACLE:V-LOCK INLET 1
8	3688 DPDT FOKR SW QUIK 250"AC/25A ON-OFF 1
9	3606 12.00 AMP CIRCUIT BREAKER 1
10	4010 XLR FEML PCB MT VERT 24MM AA-SERIES 1
11	3522 DPDT MINI PC VERT SNP ALT	1
12	8637 ROUND PUSH BUTTON 1/4" BLK 24MM	1
13	4135 XLR MALE PCB MT VERT 24MM BA-SERIES	1
14	3074 POWER CORD 3M V-LOCK (N.A)	1
15	POPLABEL 4"X5" POLYJET LABEL W/PERM ADHESIVE	1
16	8545 RECESSED RUBBER BUMPER WITH WASHER	4
17	8529 RUBBER FOOT 65 X 20MM	4
18	8565 BAR HANDLE ALL METAL RECTANGULAR	3
19	9170 STAND ADAPTER CAS T	1

PSA1S Yorkshire Paralline Series Subwoofer Integrated 2800 Watt Power Amplifier (1490 Watts Program) Peak Max SPL 135dB (129dB Continuous) ■ Iwood Companion Subwoofer for PSA1 System ■ Dual 12-inch Bass Reflex Design ■ Parallelized XLR and 1/4-inch Selectable Line or Speaker Level Inputs ■ Excursion, Peak and Thermal Weather Protection ■ Integrated Pole Mount Adaptor and Heavy Duty Wheels ■ Solid 15mm Birch Cabinet Construction Mits to Canada by North America Deemed by Isabella's Day Your Selected Electric paullife.com

1 What is to call to website www. Owned by website's two star scheduled public.com

Back view of a black electronic device with ventilation grilles and a small connector (no visible text or symbols)

Close-up of a black electronic device casing with mounting holes and a small square opening, no visible text or symbols

1

Service-QuickGuide-PSA1S

EYEBOLT INSTALLATION

1. DESCRIPTION

Many of the popular models in the Yorkville speaker cabinet line are now equipped with flying hardware for overhead suspension applications. Depending on the model, two or more internal braces have been provided for rigging purposes. Each brace contains two bolt holes and provides center-of-gravity fly-points for use with in-line or angular loads. Many of the models will support additional suspended cabinets according to their specified working load limits.

Abstract diagram with two interlocking gears inside a square frame, enclosed in an oval (no text or symbols)

IMPORTANT!!

THE RIGGING OF LOUDSPEAKER SYSTEMS IS AN EXTREMELY SERIOUS MATTER. OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, INCLUDING (BUT NOT LIMITED TO) CALCULATING WORKING LOAD LIMITS, HARDWARE INSTALLATION, AND PERIODIC SAFETY INSPECTION OF ALL HARDWARE AND CABINETRY. IF YOU LACK THESE QUALIFICATIONS, DO NOT ATTEMPT THE INSTALLATION YOURSELF, BUT INSTEAD USE A PROFESSIONAL STRUCTURAL RIGGER. IMPROPER INSTALLATION CAN RESULT IN BODILY INJURY OR DEATH. CONSULT A STRUCTURAL ENGINEER TO CALCULATE ADDED LOADS FOR A BUILDING. STRUCTURAL REINFORCEMENT MAY BE NECESSARY TO INSURE A SAFE INSTALLATION.

2. REQUIRED TOOLS

4.5mm (7/32") Hex Wrench

Thread lock adhesive (Removable Type)

3. EYEBOLT INSTALLATION

a) Using a 4.5mm (7/32") hex wrench, remove the flat head bolts from the top or bottom of the speaker enclosure to expose the tapped holes (on TX models, the flat head bolts are located within the track rails), as shown below. Be sure to keep these handy as they will be needed to seal the cabinet after the eyebolts are removed.

IMPORTANT!!

USE ONLY LOAD RATED FORGED EYEBOLTS. THESE MAY BE PURCHASED THROUGH YORKVILLE SOUND OR ATM FLY-WARE TO INSURE CABINET-BRACING STRENGTH, MAKE SURE ALL FLY-POINTS ARE SECURED WITH EITHER AN EYEBOLT OR FLAT HEAD HEX BOLT.

b) Place a drop of thread-lock adhesive on the threads of the eyebolt and insert one into exposed hole. Tighten each eyebolt by hand until its fits snugly against the cabinet. Further tighten each eyebolt by rotating it another half turn. Be sure to insert eyebolts in the threaded hole directly in-line with the suspension cable. Always follow the eyebolt manufacturers installation and use instructions.
c) Suspend each cabinet according to working load calculations and practices recommended by the rigging hardware manufacturer.

IMPORTANT!!

ON MODELS WITH ONLY TWO TOP SUSPENSION POINTS THE SUPPLIED PULL BACK AT THE REAR OF THE BOTTOM CENTER PANEL OF THE CABINET IS NOT TO BE USED AS A SUSPENSION POINT. THIS POINT TO BE USED FOR PULL BACK PURPOSES ONLY.

Remove Flat-Head Bolt and replace with Forged Shoulder Eyebolt!

DC on

DO NO T Remo vcat Flat-Head Bolts on the Side of Cabinet/s.

4. WORKING LOAD LIMITS

Specified working load limits have been determined for the enclosure as follows:

PSA1SF

4 fly points on top 3/8-inch weight of cabinet only

IMPORTANT!!

READ ALL ENCLOSED INSTRUCTIONS ABOUT PROPER USE OF HARDWARE. TO INSURE PROPER INSTALLATION, FOR TECHNICAL INFORMATION ON SUSPENSION TECHNIQUES AND EXTERIOR ACCESSORY INFORMATION WE SUGGEST CALLING ATM FLY-WARES TECHNICAL SERVICES IN THE UNITED STATES AT [phone] MONDAY THROUGH FRIDAY FROM 9 AM TO 6 PM (PST) OR FAX AT [phone]. YORKVILLE SOUND MAKES NO CLAIMS AS TO THE SAFETY OF THE ENCLOSURES IF RECOMMENDED LOAD LIMITS AND HARDWARE ARE NOT STRICTLY ADHERED TO. NOR DOES IT MAKE ANY SAFETY CLAIMS TO THE RESULTANT INSTALLATION.

IMPORTANT!!

TRACK RAILINGS: UNITS THAT INCORPORATE THE TRACK RAILING SYSTEM HAVE THE SAME WORKING LOAD LIMITS AS THEY DO WHEN THEY ARE USED WITH EYEBOLTS. THESE RATINGS MAY BE LIMITED AND BASED ON THE RATINGS OF THE TRACK FITTINGS THEMSELVES. PLEASE ENSURE THAT THE RATING OF THE CERTIFIED TRACK FITTINGS EXCEEDS NECESSARY WORKING LOAD LIMITS

EYEBOLT INSTALLATION

1. DESCRIPTION

Abstract diagram with two interlocking gears inside a square frame, enclosed by an oval outline (no text or symbols)

IMPORTANT!! LE MONTAGE DE SYSTÈME DE HAUT-PARLEUR EST UNE AFFAIRE TRÈS SÉRIEUSE. LES MONTAGES IMPLIQUANT UNE SUSPENSION AÉRIENNE NÉCESSITENT UNE CONNAISSANCE APPROFONDIE, INCLUANT (MAIS NON-LIMITÉE) AU CALCUL DES LIMITES DE CHARGE DE TRAVAIL, LA QUINCAILLERIE D'INSTALLATION, ET INSPECTIONS PÉRIODIQUES DE SÉCURITÉ DE TOUTE LA QUINCAILLERIE ET DE L'ÉBÉNISTERIE. SI VOUS N'AVEZ PAS CES QUALIFICATIONS, NE TENTEZ PAS DE FAIRE VOUS-MÊME L'INSTALLATION, AYEZ PLUTÔT RECOURS À UN PROFESSIONNEL DU DOMAINE. UNE INSTALLATION INADÉQUATE PEUT CAUSER DES BLESSURES CORPORELLES OU MÊME LA MORT. CONSULTEZ UN INGÉNIEUR EN STRUCTURE POUR CALCULER LA CHARGES ADDITIONNELLE AJOUTÉE AU BÂTIMENT. UN RENFORCEMENT DE LA STRUCTURE DU BÂTIMENT POURRAIT ÊTRE NÉCESSAIRE POUR ASSURER UNE INSTALLATION SÛRE.

2. OUTILS REQUIS

Clé Hex 4.5mm (7/32")

There is a simple change that can be implemented in any PSA1s having a serial number beginning with a 1. This bulletin will illustrate how to easily make this change, which will lead to greater long-term reliability and which will also improve the sound of the PSA1s when the inputs are excessively overdriven.

1. Lay down the PSA1s with the grille-side down.

2. Remove the 18 black bolts that are along the perimeter of the metal chassis on the back.

3. To remove the chassis, use a flathead screwdriver (or other similar prying device) and pry up the chassis from the side with the XLR jacks.

4. Carefully tilt up the side of the chassis you've lifted, raising it about four or five inches. If you look beneath the chassis, you'll see two pairs of black and red twisted wires running into the cabinet.

5. At the end of these wires is a locking header. If you pinch the clip on the header it will unlock and the wires can be easily disconnected from the amplifier boards.

6. After the wires are disconnected, you can remove the chassis from the box and set it on your work surface.

3 30.05.2012 06:58

Close-up of an electronic circuit board with copper and resistors, no visible text or symbols

Close-up of a hand holding a small electronic device with red circular annotation highlighting a component (no readable text or symbols)

1. Disconnect the grey ribbon cables that run from the input/preamp board to the power amplifier boards.

Two-panel photo showing a green circuit board with red and blue components, one being cut with a black arrow indicating transformation (no text or symbols visible)

1. Locate the position where you will be tacking the new resistors onto the back of the input/preamp PCB as depicted in the image below:

Close-up of an electronic circuit board with visible traces and components, no readable text or symbols present.

1. Tack a 20.0 kΩ 1% 1/4W resistor onto each of the two positions depicted above. (Yorkville Sound can supply you with 2x YS#6123 for this job if you require).

2. Re-assemble the PSA1s and test that it is working. (NOTE: either speaker wire [see image 4] can connect to either amplifier board when re-assembling).

Congratulations! Your PSA1s limiter will now better protect the woofers and amplifiers in the event of excessive input signals being driven into it.

A-1214 Power Amplifier YS#9702

Important!

This module is not repairable

In case of failure it needs to be replaced.

A-1014 Amplifier Pinout

Pin 1: Vbus Pin 2: Vbus Pin 3: Ground Pin 4: Ground Pin 5: +15 Vdc Pin 6: -15 Vdc Pin 7: +5Vdc Pin 8: -5Vdc Pin 9: Ground Pin 1: Ground Pin 2: Audio In + Pin 3: Audio In - Pin 4: Ground Pin 5: +15 Vdc Pin 6: -15 Vdc Pin 7: Ground Pin 8: Current Monitor Pin 9: Temperature Monitor Pin 10: Protect Pin 11: Disable Pin 12: Clip Pin 13: +5 Vdc Pin 14: -5 Vdc