SWCD 1000 A1 - Hair dryer SILVERCREST - Free user manual and instructions

USER MANUAL SWCD 1000 A1 SILVERCREST

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.

MULTI-WARMLUFT-STYLER SWCD 1000 A1

DE AT CH

MULTI-WARMLUFT-STYLER

Bedienungsanleitung

IT CH

MULTISTYLER

Operating instructions

DE/AT/CH	Bedienungsanleitung	Seite	1
FR/CH	Mode d'emploi	Page	13
IT/CH	Istruzioni per l'uso	Pagina	25
GB	Operating instructions	Page	37

KOMPERNASS GMBH

Burgstraße 21

D-44867 Bochum

www.kompernass.com

Information for these operating instructions 38

Copyright 38

Limited liability. 38

Intended use 38

Safety instructions 39

Items supplied 41

Unpacking. 41

Disposal of the packaging. 42

Appliance description. 42

First use 42

Attachment fitting/removal. 43

Fitting Attachments 43

Removing attachments 43

Switching on/off / Selecting a heat level. 43

Using the attachments 44

Large round brush 44

Small round brush 44

Curling tongs 44

Smoothing brush 45

Half round brush 45

Styling jet 45

Cleaning and Care 45

Storage 46

Tips for the perfect hairstyle 46

Disposal of the appliance. 46

Technical data 46

Troubleshooting 47

Warranty. 47

Service 48

Importer. 48

Introduction

Information for these operating instructions

Congratulations on the purchase of your new appliance.

You have clearly decided in favour of a high-quality product. These operating instructions are a part of this product. They contain important information in regard to safety, use and disposal. Before using the product, familiarise yourself with all of these operating and safety instructions. Use this appliance only as described and only for the specified areas of application. In addition, pass these operating instructions on to whoever might acquire the appliance at a future date.

Copyright

This documentation is copyright protected.

Any copying or reproduction of it, including as extracts, as well as the reproduction of images, also in an altered state, is only permitted with the written authorisation of the manufacturer.

Limited liability

All technical information, data and information for the connection and operation contained in these operating instructions correspond to the latest at time of printing and, to the best of our knowledge, take into account our previous experience and know-how.

No claims can be derived from the details, illustrations and descriptions in these instructions.

The manufacturer assumes no responsibility for damage caused by failure to observe these instructions, improper use, incompetent repairs, making unauthorised modifications or for using unapproved replacement parts.

Intended use

This appliance is intended for human hair care and only for use in domestic households.

It is not intended for use on animals or in commercial or industrial environments.

This appliance is not intended for any other use or for uses beyond those mentioned. Claims of any kind for damage resulting from unintended use will not be excepted. The operator alone bears liability.

Safety instructions

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power sockets supplying a mains power voltage of 220 - 240V /50Hz
- To avoid risks, arrange for defective plugs and/or power cables to be replaced at once by qualified technicians or our Customer Service Department.
In the event of operating malfunctions, and before cleaning the appliance, disconnect the plug from the mains power socket.
- To disconnect the power cable, always pull the plug from the socket, do not pull the power cable itself.
- Do not crimp or crush the power cable and lay it in such a way as to prevent anyone from stepping on or tripping over it.
- Ensure that the power cable does not become wet or moist during use. Place it such that it cannot be crushed or damaged.
- Should the appliance become damaged, to avoid personal risks discontinue the use of it immediately.
- Do not wrap the power cable around the appliance and protect it from being damaged.
Under no circumstances may the appliance be submersed in fluids or fluids be allowed to permeate the housing. Do not expose the appliance to humidity and do not use it outdoors. Should liquids enter the housing, disconnect the appliance from the mains power socket immediately and arrange for it to be repaired by a qualified technician.
To enable you to disconnect the appliance quickly in the event of an emergency, do not use extension cables.
NEVER grasp the appliance, the power cable or the plug with wet hands.
- Disconnect the appliance from the mains power source immediately after use. The appliance is completely free of electrical power ONLY when unplugged.
- Ensure that objects can never penetrate into the inside of the appliance, particularly not metal hair clips, grips or hairpins.

RISK OF ELECTRIC SHOCK

Under no circumstances should you use this appliance in the close vicinity of baths, shower basins or other receptacles containing water. The proximity of water presents a risk, even when the appliance is switched off. After use, always disconnect the plug from the mains power socket. As additional protection, the installation of a faulty-current protection unit with an activation power rating of not more than 30mA is recommended for the power circuit in the bathroom. Ask your electrician for advice.

WARNING! RISK OF INJURY!

NEVER leave a switched on appliance unsupervised.
- Do not place the appliance close to sources of heat and protect the power cable against damage.
- Do not operate the appliance if it has sustained a fall or is damaged in any way. Arrange for the appliance to be checked and/or repaired by qualified technicians.
- Do not open the housing or attempt to repair the appliance yourself. Should you do so, the safety concept can no longer be assured and the warranty becomes void. Permit only authorised technicians to repair a defective appliance if repairs should be necessary.
The appliance and its accessories can become hot when in use. Therefore only touch the handle and the buttons.
This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiencies in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance.
Always only use the appliance with attachments, never on its own, as the connector for the attachments becomes hot during operation.
- Allow the appliance to cool down before attaching or detaching attachments.

WARNING! RISK OF INJURY!

• Use only the supplied original accessories as these have been optimised for interaction with the appliance. Other parts are possibly not adequately safe.
• Keep the openings for the air inlet and outlet clear so as to have unimpaired air flow. Otherwise the appliance may overheat.
  Exercise caution when using hair spray, water atomizers etc. It could happen that the air flow may blow these substances directly into your eyes. On the other hand, these substances must not enter the appliance - they may be inflammable, aggressive or conductive for electricity.

Items supplied

This appliance is supplied with the following components as standard:

• Multi-Function Hot Air Styler
  Storage case
• Small round brush
  Large round brush
• Half round brush
  Curling tongs
  Smoothing brush
  Styling jet
• Operating instructions

NOTICE

• Check the contents to ensure that everything is present and for signs of visible damage.
• If the contents are not complete or are damaged due to defective packaging or through transportation contact the Service Hotline (see chapter Service).

Unpacking

Remove all parts of the appliance and the operating instructions from the carton.
Remove all packing material.

WARNING! RISK OF SUFFOCATION!

• Packaging materials should not be used as a play thing. There is a risk of suffocation.

Disposal of the packaging

The packaging protects the appliance against transport damage. The packaging materials are selected from the point of view of their environmental friendliness and disposal technology and are therefore recyclable.

The recirculation of packaging into the material circuit saves raw material and reduces the amount of waste generated. Dispose of packaging material that is no longer needed as per the regionally established regulations.

NOTICE

If possible, preserve the appliance's original packaging during the warranty period, so that in the event of a warranty claim you can package the appliance ideally for its return.

Appliance description

Appliance:

1 Attachment insertion slot
2 Slide switch Cool Shot
3 Level switch
4 Power cable
Suspension loop
Air intake grill
7 Release button "push"

Accessories:

3 Half-round brush
Curling tongs
10 Small round brush
Storage bag
Smoothing brush
Large round brush
14 Styling jet

First use

Before taking the appliance into use ensure that ...
- the appliance and the attachments are in good working order,
- all packaging materials have been removed.
Clean all of the attachments as described under "Cleaning and care".

Attachment fitting/removal

WARNING! RISK OF INJURY!

After operation, the appliance components may be hot!

Fitting Attachments

Insert the desired attachment into the attachment insertion slot ①, so that the front arrow symbol on the attachment points at the arrow symbol on the attachment insertion slot ①.
Turn the attachment clockwise until it clicks into place. The back arrow on the attachment now points at the arrow on the attachment insertion slot 1

Removing attachments

■ First switch the appliance off and allow it to cool down..
Press the release button "push" ① and turn the attachment anti-clockwise
The attachment can now be removed by pulling it out of the attachment insertion slot 1.

Switching on/off / Selecting a heat level

When you have inserted the required attachment and connected the plug with the mains power socket, you can now switch the appliance on with the level switch ③ and select the output level:

• "0" The appliance is switched off
• "1" for a reduced air-flow strength with heat

• "2" for a high air-flow strength with heat

• You switch the appliance off by sliding the level switch ③ to the position "0" (= appliance off).

To fix the styling, you can use the slide switch Cool Shot 2. The styling will be fixed by the cool air stream:

• During operation, slide the slide switch Cool Shot upwards. The air flow will be cooler.
• When you want to deactivate the cool air stream, slide the slide switch Cool Shot downwards.

Using the attachments

Large round brush 13

This attachment gives the hair more volume or large curls.

Wind a slightly damp strand of hair around the large round brush 18.
Switch the appliance on at level 1 or 2.
When the strand is dry, slide the slide switch Cool Shot 2 upwards. Wait until the strand has cooled.
Unwind the large round brush 13 from the strand.
■ Proceed with the other strands in the same way.

Small round brush 10

With this attachment you can put curls or waves into your hair.

Wind a slightly damp strand of hair around the small round brush 10.
Switch the appliance on at level 1 or 2.
When the strand is dry, slide the slide switch Cool Shot ② upwards. Wait until the strand has cooled.
Unwind the small round brush 10 from the strand.
■ Proceed with the other strands in the same way.

Curling tongs 9

With this attachment you can put small spiral curls (angel curls) into your hair.

Secure the tip of the strand with the clip.
Then wind the slightly damp strand of hair around the curling tongs 9.
Switch the appliance on at level 1 or 2.
When the strand is dry, slide the slide switch Cool Shot upwards. Wait until the strand has cooled.
Pull the curling tongs out of the strand.
■ Proceed with the other strands in the same way.

Smoothing brush 12

With this attachment you can smoothen your hair.

Grasp a strand of hair with the folded-out smoothing brush 12 near the hair roots, close it and keep it closed.
Switch the appliance on at level 1 or 2.
Pull the strand slowly through the smoothing brush 12.
■ Proceed with the other strands in the same way.

Half round brush ⑧

The half-round brush ⑥ is suitable for combing and simultaneous blow drying of the hair.

Styling jet 14

With this attachment you can target parts of your hair for styling and blow-drying.

Cleaning and Care

RISK OF ELECTRIC SHOCK

Before cleaning the appliance, always disconnect the power cable from the mains power socket. There is a risk of receiving an electric shock!

WARNING! RISK OF INJURY!

Allow the appliance to cool sufficiently before cleaning it. Risk of Burns!

CAUTION - PROPERTY DAMAGE!

Do not use any aggressive, abrasive or chemical cleaning agents! These could damage the upper surfaces of the appliance.
Clean the appliance only with a lightly moistened cloth.
■ Allow the appliance to dry completely before re-use or before storing it.
If necessary, wipe the storage bag 1 or the attachments 8/9/10/ 12/13/14 with a damp cloth.
Clean the air intake grill 6 at regular intervals with a soft brush.

Storage

You can also hang the appliance up by the suspension loop 5.
If you are intending to not use the appliance for an extended period, store it in the storage bag ①. The appliance must be cooled down for this!

Tips for the perfect hairstyle

Only style your hair when it is already almost dry.
Divide your hair into individual strands for more volume.
- You will achieve additional volume by starting to dry your hair at the hairline and working down towards the ends.
After switching the appliance off, wait for a few seconds before releasing the curl.
Let your hair cool down sufficiently before combing it out.

Disposal of the appliance

Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC-WEEE (Waste Electrical and Electronic Equipment).

Dispose of the appliance through an approved disposal centre or at your community waste facility. Pay heed to the currently applicable regulations. In case of doubt, please contact your waste disposal centre.

Technical data

Mains voltage	220 - 240 V ~, 50 Hz
Power consumption	1000 W
Protection class	II ☐

Troubleshooting

Problem	Cause	Remedy
The appliance does not function.	·The plug is not inserted into a power socket.	·Insert the plug into a mains power socket.
	·The appliance is not switched on.	·Switch on the appliance.
	·The appliance is defective.	·In this case, contact Customer Services.
The appliance does not get hot.	·The slider switch Cool Shot ② is in the upwards position.	·Slide the slider switch Cool Shot ② downwards.
	·The appliance is defective.	·In this case, contact Customer Services.

Warranty

The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Customer Service department. Only in this way can a post-free despatch for your goods be assured.

NOTICE

The warranty covers only claims for material and manufacturing defects, it is not applicable for transport damages, parts subject to wear and tear or for damage to fragile components, e.g. bulbs and switches.

This appliance is intended solely for private domestic use, not for commercial applications. If this product has been subjected to improper or inappropriate handling, abuse, or modifications not carried out by one of our authorised service centres, the warranty will be considered void.

Your statutory rights are not restricted in any way by this warranty. The warranty period is not extended by repairs made under the warranty. This applies also to replaced and repaired parts.

Damages and defects extant at the time of purchase must be reported immediately after unpacking, resp. no later than two days after the date of purchase.

Repairs made after the lapse of the warranty period are subject to charge.

Service

GB Service Great Britain

Tel.: [phone] (£ 0.10/Min.)

E-Mail: [e-mail]

IAN72216

Importer

KOMPERNASS GMBH

BURGSTRASSE 21

44867 BOCHUM, GERMANY

www.kompernass.com