Fly Away 40 waterproof - Pest control Eurom - Free user manual and instructions

USER MANUAL Fly Away 40 waterproof Eurom

This manual has been compiled with the utmost care. Nevertheless, we reserve the right to optimize this manual at any time and to adjust it technically.

Technical Specifications

1. This appliance is intended for indoor use.

2. The fact that the device is splash-proof (IPX4) means that it is also

suitable for damp rooms, e.g. stables.

3. Connect the appliance only to suitable earthed socket that

provides 220-240V~50Hz.

4. Do not use the appliance in areas that contain explosive or

flammable gases, vapours and liquids or similar materials e.g., not in garages. In addition, do not use the appliance in places that have a risk of substance explosion. The insect killer could emit a spark that can ignite such materials!

5. Do not use the appliance in ‘wet’ rooms, such as swimming pools,

laundry rooms, bathrooms, etc. Never submerge the appliance in water or in any other liquid!

6. Do not place the appliance in an open window (due to rain), not on

a wet surface and prevent that any type of moisture is spilled on it.

7. Do not make any changes to the appliance; that can be dangerous

and it will invalidate the manufacturer’s warranty.

8. Make sure you never touch the high-voltage grid while it operates:

not with your fingers, a pen, a piece of paper or any other object. This can cause an electric shock and perhaps fire! Never stick any objects into the appliance through the safety grid.

9. Ensure careful supervision when the appliance is used in the

presence of children, incapacitated persons or pets. The appliance is not suitable for use by people (including children) with physical, sensory or mental disabilities. It is also not suitable for use by people who lack knowledge and experience, regardless of whether there is supervision or instructions given (prior to use) by a person responsible for their safety.

10. You must supervise that children do not play with the appliance.

The grid is under high voltage!

11. Place the appliance out of children’s reach. Danger! High voltage!

12. Remove the plug from the socket before cleaning the appliance.

Use a suitable brush (not a metal brush) to clean the high-voltage grid and throw away the dead insects in the collection tray at least once a week.

13. If the appliance, cord or plug shows damage, switch off the

appliance immediately and remove the plug from the socket. Turn9 to your supplier or a certified electrician for repairing/replacing the part. Never carry out repairs yourself!

14. Remove the plug from the socket and switch off the insect-killer

immediately, if you hear strange noises, smell something or see smoke.

15. If the electric cable or the plug is damaged, it must by replaced by

a qualified person. Never carry out repairs yourself!

16. If the lamp, starter, fuse or any other part is defective or damaged,

it must be replaced by a qualified person. Never carry out repairs yourself. Operating principle The insect-killer is designed to attract flying insects, such as flies, moths, mosquitoes, etc. using ultraviolet light. As they fly towards with light, they fly into an electrified metal screen that electrocutes them. The device The insect-killer is highly efficient and safe. The electrified screen is made from stainless steel. This material has been chosen so that there is only minimal crackling on electrocution and the insects neither combust nor is the material damaged. The special UV lamps are totally harmless to humans and pets. An external safety screen protects users from coming into unintentional contact with the electrified screen. The insect-killer uses no chemicals or sprays, does not emit smoke or odours, produces no waste and is environmentally friendly. The insect- killer is designed to be used indoors, in the home, in work areas, retail outlets, etc. The fact that the device is splash-proof (IPX4) means that it is also suitable for damp rooms, e.g. stables. Description

Installation When placing and installing the insect-killer, it is important to take the location of the device in the room/space into account.

1. Hang the insect-killer centrally in the area; that

way, the ultraviolet light can be dispersed better and attract insects from the entire area.

2. Hang the insect-killer or a wall or in a corner if

the room/area is not very large.

3. The best height for the insect-killer is 1.5 to 2

metres off the ground, which is the most common flying height for insects.

4. The insect-killer can be suspended from the

chain or placed on a surface such as a table or cabinet. Make sure it is on a good stable base.

5. Install your insect-killer in a relatively dark

place , near an electricity socket: not in direct sunlight (windows, doors), because bright sunlight weakens the insect-killer’s radiation power. Artificial light does not weaken the radiation, but makes it work less well.

6. Do not place the insect killer in the draft. Insects avoid drafts / air