IAN 102987 - Uncategorized Livarno Lux - Free user manual and instructions

USER MANUAL IAN 102987 Livarno Lux

Introduction Congratulations on your new product. You have selected a high quality product. Please read carefully and completely through these operating instructions. Fold out the page with the illustrations. These instructions form part of the product and contain important informa- tion about bringing the product into use and its han- dling. Always observe all the safety advice. Check that the correct mains voltage is available and that all the parts have been properly assembled before bringing into use. Should you have any questions or be uncertain as to how to operate the device, please get in touch with your dealer or service point. Please keep these instructions in a safe place and hand them on to a third party if necessary.

Proper use This light is suitable only for interior use, in dry and enclosed spaces. This article is solely to be used as a reading lamp. This article is a wall or reading light. Do not use it as a nightlight. This lamp is in- tended for use only in a domestic environment.

Description of parts

ON / OFF switch with a stepless dimmer switch

Included items Check that all the items and accessories are present and that the lamp is in perfect condition immediately after unpacking. 1 LED Plug-in light, model 2917-012S or 2918-012S 1 LED light bulb, 3 W (already installed) 1 Set of instructions

Safety Safety advice The right to claim under the guarantee shall be rendered invalid in respect of damage caused by the non-observance of these operating instructions. No liability is accepted for consequent damage. No liability is accepted for damage to property or persons caused by improper handling or non-ob- servance of the safety advice. To avoid danger to life from electric shock Every time before connecting the lamp the mains, check it and the mains lead for damage. Never use your light if you find it is damaged in any way. CAUTION! A damaged light bulb means your life is at risk from electric shock. If there is any damage, repairs to be carried out or other problems related to the light bulb, please contact the service centre or a qualified electrician. Before assembly, ensure that the mains voltage available corresponds to the operating voltage necessary of the light (230 - 240 V ∼ 50 Hz). Never let the lamp come into contact with water or other liquids. Never open or insert anything into electrical fittings or equipment. Doing this sort of thing can lead to a serious danger to life from electric shock. Safety / Start-up / Maintenance and Cleaning / Disposal15 GB Introduction / Safety Safety / Start-up / Maintenance and Cleaning / Disposal To avoid danger of fire and injury RISK OF INJURY! Before using the light bulb always check it for damage. Do not use the light with a faulty light bulb. RISK OF INJURY! Check the light regularly and before every use to see if there is any damage to the casing and mains plug. Never use the light if it shows any signs of damage. RISK OF INJURY FROM BURNS! Ensure the lamp has been switched off and allowed to cool before you touch it. In this way you will avoid the danger of burns. Bulbs give off a lot of heat around the top of the lamp. Do not allow the lamp or the packaging mate- rials to lie around unattended. Plastic film or bags, Styrofoam etc. can turn into dangerous toys for children. Do not look directly into the light source (light bulb, LED etc.). The lamp is not replaceable. This light is not suitable for external dimmers or electronic switches. In order to disconnect the light completely from the power supply, the light must be removed from the socket. The light can not be repaired. If the light is damaged, the product must be disposed of. Safe working Use the light in a way where in it protected from moisture and dirt. Remain alert at all times and always watch what you are doing. Always proceed with caution and do not assemble the lamp if you cannot concentrate or feel unwell. Please familiarise yourself with all the instructions and diagrams in this manual and with the lamp itself before using it. Dispose of the lamp if the lamp glass

is bro- ken or cracked. This article is a wall or reading light. Do not use it as a nightlight. Start-up Insert the lamp’s mains plug

into an ordinary household socket. Use the ON / OFF switch

to switch the lamp on or off. Note: Set the desired brightness by turning the ON / OFF switch

into the desired position using the lamp pin

completely about itself. Otherwise the mains lead inside the lamp could be damaged. Maintenance and Cleaning CAUTION! RISK OF ELECTRIC SHOCK! First of all pull the lamp out of the mains socket. For electrical safety, never clean the light with water or other fluids, or immerse it in water. Note: The device requires no maintenance. The lighting set cannot be replaced. Do not use any solvents, petrol or similar. This would cause damage to the light. Allow the lamp to cool down completely. When cleaning, only use a dry, lint-free cloth.

Disposal The packaging and ancillary packing consist entirely of environmentally-friend- ly materials. They can be disposed of at your local recycling facility. The symbol of the wheelie bin with the line through it means that, in the European Union, the product has to be disposed of in a separate refuse collection. This applies to the product and to all components bearing this symbol. Products marked in this way may not be disposed of along with normal domestic waste but have to be handed in at a recycling collection point for electrical and electronic appliances. Recycling16 GB Disposal / Warranty and Service helps to reduce the consumption of raw materials and to ease the burden on the environment. Warranty and Service Warranty Declaration This product has a 3-year warranty from the date of purchase; the warranty is only valid for the origi- nal purchaser and is not transferable. Please keep your receipt as proof of purchase. The warranty applies to material or manufacturing defects only. It does not cover wear parts or damage caused by improper use. The guarantee lapses in cases of un- authorized tampering. Your statutory rights are not restricted in any way by this warranty. Please con- tact the service centre by telephone. In the event of any claims under the warranty. This is the only way to ensure that your instrument can be returned free of charge.

Declaration of Conformity This product fulfils the requirements of the applicable European and national directives (Electromagnetic Compatibility 2004 / 108 / EC, Low Voltage Directive 2006 / 95 / EC, Ecodesign directive 2009 / 125 / EC

RoHS directive 2011 / 65 / EU). Conformity has been demonstrated. The relevant declarations and documents are held by the manufacturer.