YOYO² 0+ - Stroller BabyZen - Free user manual and instructions

To fold the stroller, simultaneously press the handlebar unlocking buttons, then fold the handlebar back. Grab the red handle under the seat, press the safety button and pull the handle back until you hear a double 'click'. Release your hand, then lift the stroller by the chrome carrying handle. It folds automatically. Lock the safety clip if necessary.

To unfold, hold the stroller by the carrying handle (thumb on top) and the handlebar with the other fingers. Ensure the child is away. With the other hand, unlock the safety clip. While holding the handlebar, release the thumb and lift the stroller in a quick motion. The stroller automatically locks in the open position.

The YOYO+ 0+ newborn pack installs on the YOYO+/YOYO² frame. To install the backrest, push out the red pin using a coin, present the backrest from the front, mount the right hinge into the frame, position the left side in the pivot axis, and push in the white pin. For the seat, insert the large metal hoop at the front of the canopy, cover the backrest with the textile seat, secure the straps and clips. Then install the seat cushion and harness by threading the straps through the openings appropriate for the child's size.

The maximum child weight is 9 kg (20 lbs) and maximum height is 70 cm (28 inches). The basket supports up to 5 kg (11 lbs) and the mesh pocket up to 0.5 kg (1 lb). Do not exceed these limits to avoid any risk of tipping.

For the frame, use a soft cloth soaked in a mild non-toxic detergent diluted in water. Never use harsh detergents or solvents. Textile parts are machine washable at 30°C max, no bleach. In case of rain, use the rain cover (sold separately) and let the stroller dry before folding.

To adjust the harness, pass the shoulder straps through one of the three openings in the cushion according to the child's size. Pass the waist straps through the side openings and the crotch strap through the center opening. To lock the harness, push the tabs of the waist strap through the loops of the shoulder straps and then into the crotch strap buckle. Adjust the length of the straps to fit snugly. To unlock, press the center button of the buckle.

To lock the brake, press with your foot on the end of the red pedal until you hear a click. Make sure the brake is engaged. To unlock, press the front of the pedal or lift the end. It is recommended to engage the brake when installing or removing the child.

Use the appropriate rain cover (sold separately). Attach the elastics on the sides of the seat and secure the fasteners on the sides of the handlebar. After use, allow the stroller to air dry before folding and storing.

BABYZEN guarantees the product against any manufacturing defect for 2 years from the date of purchase, under normal use and in accordance with the manual. The warranty covers the chassis, frame, wheels, textiles, and harness. It does not apply in case of normal wear, misuse, unauthorized repair, or if the serial label is removed. For any claim, contact your authorized dealer.

No, it is imperative to use only accessories supplied or approved by BABYZEN. The use of non-compliant spare parts may affect the safety and stability of the stroller and voids the warranty.