USB K800 - Helmet EDIFIER - Free user manual and instructions

USER MANUAL USB K800 EDIFIER

USB K800 USB Computer HeadsetProduct Description Power on: blue LED light is lit Power off: blue LED light is off Microphone is mute: red LED light is lit ENNote: Images are for illustrative purposes only and may differ from the actual product. Functional Operation Power on: Please insert the USB-A plug of the headset into a computer, the headset should be ready to go and blue LED light will be steady lit, now you can play or input audio; Power off: Please unplug the USB-A plug from the computer, LED light will be off; Mute: Please switch to mute state through the computer, microphone will turn off and red LED light will be lit; Volume control: Please adjust the headset and microphone volume through the computer.• Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.

• Do not put the product in places exposed to sun or with high temperature. High temperature will shorten service life of electronic components, damage battery and make plastic components deformed.

• Do not put the product in cold places to avoid damaging internal circuit board.

• Do not dismantle the product. Non-professional personnel may damage the product.

• Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.

• Do not use drastic chemicals or cleaner to clean the product.