eufyCam E - Camera batteries eufy - Free user manual and instructions

Product Type	Outdoor/Indoor Wireless Security Camera
Brand	Eufy (Anker)
Model	eufyCam E
Power Supply	Rechargeable Lithium-ion battery, charges via micro-USB (5V)
Charging Time	Approximately 4 hours (fast charge < 4h)
Battery Life	Up to 1 year (depending on usage)
Connectivity	Wi-Fi 2.4 GHz, compatible with eufyCam HomeBase
Weather Resistance	IP67 (dust and waterproof)
Motion Sensor	Built-in, optimal detection range at 2-3 m height
Viewing Angle	140° (diagonal) - adjustable via swivel mount
Video Resolution	1080p Full HD
Night Vision	Yes, up to 8 meters
Audio	Built-in microphone and speaker (two-way audio)
Mounting	Outdoor mount (screws and anchors) or indoor mount (hook)
Dimensions (approx.)	Height: 8 cm, Diameter: 5 cm
Weight (approx.)	120 g (without mount)
Box Contents	eufyCam E camera, outdoor mount, indoor mount, micro-USB cable, screws and anchors, installation guide
Compatibility	Requires an eufyCam or eufyCam E HomeBase (sold separately)
App	Eufy Security (iOS and Android)
Maintenance	Clean with a soft, dry cloth, avoid abrasive products
Safety and Compliance	Compliant with FCC, IC, CE standards; do not expose to direct sunlight
Repairability	Battery not user-replaceable; contact Eufy support

Frequently Asked Questions - eufyCam E eufy

How to recharge the battery of the eufyCam E?

Use the provided micro-USB cable and plug it into the charging port located on the back of the camera. You can charge it via a standard USB charger (5V) or directly on the HomeBase charging port. Full charge takes about 4 hours. A solid red LED indicates charging; it turns off when the battery is full.

What is the battery life of the eufyCam E?

Battery life can reach 1 year depending on usage (number of recorded events, connection quality, temperature). To optimize lifespan, avoid extreme exposures and use motion detection recording mode.

How to install and mount the eufyCam E outdoors?

1. Choose a location 2-3 m from the ground, protected from direct sunlight. 2. Drill holes with a 6 mm drill bit, insert anchors if the wall is concrete, brick, or stucco. 3. Screw the outdoor mount base, attach the ball mount, then snap the camera onto it. 4. Adjust the angle via the Eufy Security app.

Can I use the eufyCam E without a HomeBase?

No, the eufyCam E requires a HomeBase (eufyCam or eufyCam E) to operate. The HomeBase acts as a base station, local storage, and Wi-Fi hub for the camera.

What to do if the LED is flashing or red?

Consult the LED guide in the Eufy Security app. Generally: solid red = charging; flashing red = low battery or error; flashing blue = pairing; solid blue = normal operation. If the problem persists, restart the camera or contact support.

How to improve the Wi-Fi reception of the eufyCam E?

Use the Mounting Guide feature in the app to test the signal. If the signal is weak, move the camera closer to the HomeBase or reduce obstacles (thick walls, metal). The recommended maximum distance is about 30 meters in open field.

Is the eufyCam E rain-resistant?

Yes, it is certified IP67: dust-tight and can withstand immersion up to 1 meter for 30 minutes. The outdoor mount is designed for outdoor use, but avoid direct sunlight.

How to add an eufyCam E to my existing system?

In the Eufy Security app, go to 'Add a Device', select 'eufyCam E' and follow the on-screen instructions. Ensure your HomeBase is powered on and that the camera's region (A or B) matches the HomeBase's region.

How to clean and maintain the eufyCam E?

Clean the lens and housing with a soft, dry cloth. Do not use chemicals or abrasives. Regularly check that the mounting screws are tight and the camera is not obstructed.

What to do if the eufyCam E does not turn on?

1. Check that the battery is charged (plug in the micro-USB cable). 2. Try a different cable and charger. 3. Perform a restart by holding the power button for 10 seconds. 4. If nothing works, contact Eufy customer support.

USER MANUAL eufyCam E eufy

Anker Innovations Limited. All rights reserved, eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.

Model:T8112

51005001318V01

Quick Start Guide

eufyCam E Wire-Free HD Security Camera

Kurzanleitung | Guia de imico rapi do

What's in the Box 02

Adding eufyCam E to Your Existing System 04

Find a Good Mounting Spot 05

Mounting the Camera Outdoors 07

Mounting the Camera Indoors 09

Charging eufyCam E 11

Safety 15

What's in the Box

eufyCam E (T8111)

:Indcor Mount)

Outdoor Mount Mounting Screws and Anchors

1. eufyCam E is only compatible with the eufyCam or eufyCam E Security System.
2. Make sure the region printed on your product package (A or B) matches the region printed on your HomeBase.

Keep the camera at least 1 ft away from your internal / external hard drives.

02 English English

03

Adding eufyCam E to Your Existing System

On Eufy Security app, follow the onscreen instructions to add your Eufy Security devices. Choose Add Device, then select eufyCam E to add it to your system.

04 English

Find a Good Mounting Spot

Signal Strength

Use the "Mounting Guide" function, found at the end of the setup process or under Camera Settings > Mounting Guide, to test the wireless signal strength of eufyCam E at the location you wish to mount the camera. Move the camera as close to the HomeBase as possible if the wireless signal strength is poor.

English 05

Height and Location

Hang eufyCam E 7-10 ft (2-3 m) above the ground. This height maximizes the detection range of the motion sensor of eufyCam E. Avoid placing eufyCam E under direct sunlight.

06 English

Mounting the Camera Outdoors

Outdoor mount is designed specifically for outdoor environment.

Drill holes with a 15/64 in (6 mm) drill bit, then insert the anchors into the holes; anchors are necessary for walls that are made out of hard materials such as concrete, brick, or stucco.

English 07

b

Screw the base of the outdoor mount onto the wall. Fasten the ball bracket of the outdoor mount to the base of the outdoor mount.

C

08 English English

Fasten eufyCam E to the outdoor mount and adjust the viewing angle by checking the live stream feed in the eufy Security app.

Mounting the Camera Indoors

Stick the camera directly to any flat surface made out of iron. Or you can use the indoor mount to mount the camera:

Drill a hole. Use the included anchor if it's drywall and fasten the hook:

b

Hang the indoor mount on the hook.

C

Attach eufyCam E to the indoor mount and adjust the viewing angle.

10 English
Charging eufyCam E
Fast charging (<4Hr)
English 11

Normal charging

approximately 4 hours, it will take longer if you charge the camera via a universal 5V USB charger.

The LED indicator turns solid red during charging, and goes off once eufyCam E is fully charged.

Use the provided micro-USB charging cable to connect eufyCam E to the camera charging port on the backside of the HomeBase. Charging a camera takes

12 English

English 13

For troubleshooting, check Help on the eufy Security app. Refer to app page for LED Indicator status.

English

Safety

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

English 15

to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/TV technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

The following importer is the responsible party

Company Name: POWER MOBILE LIFE, LLC

Address: 400 108th Ave NE 5te 400, Bellevue, WA 98004-5541

Telephone:[phone]

This product complies with the radio interference requirements of the European Community.

16 English English

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web site www.euylife.com

Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited.

A statement regarding the AC/DC adapter as disconnect device is missing in the user manual. The statement shall require a socket outlet that is installed near equipment and that shall be easily accessible.

The adapter shall be installed near the equipment and shall be easily accessible.

Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment.

The suitable temperature for the product and accessories is -20°C-50°C.

When charging, please place the device in an environment that has a normal room temperature and good ventilation.

It is recommended to charge the device in an environment with a temperature that ranges

from 5^ - 25^

Please ensure to use only the charger offered by the manufacturer. Using unauthorized charger may cause danger and violate the authorization of the projector and the guarantee article.

RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d = 20cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.

CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE, DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Wi-Fi Operating Frequency Range:2412-2472MHz for EU;

SUB-1G Frequency range:866-866.8MHz

product is designed and manufactured with high quality materials and

components, which can be recycled and reused.

symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. This device complies with Industry Canada licence-exempt RSS standards(s). Operation is subject to the following two conditions:

12-month limited warranty

12 Monate eingeschrankte Garantie | Garantia limitada de 12 meaes

United States [phone] Mon-Fri 9AM-5PM (PT)

United Kingdom [phone] Mon-Fn 6AM-1'AM (GMT)

Germany [phone] Mon-Fr 6 00-11:00

Email Us

Customer Support [e-mail]

@Eulfoficial

EutyOfficial

eufyofficial