Humini - Humidifier AIR NATUREL - Free user manual and instructions

USER MANUAL Humini AIR NATUREL

Downloaded from www.vandenborre.beENGLISH Never place the humidier in an area where it is accessible to children. Do not let children use the appliance as a toy. Do not let children play with the packaging (plastic bag, etc.). Children must stay under parental supervision, so that they do not play with the appliance. This product is not suitable for people (including children) with reduced physical, sensorial or mental abilities as well as people who lack knowledge of the product, except under supervision or if they have received prior instructions from the person responsible for their safety. This unit works on 100 - 240 volts. Please check this is suitable for the electrical installation on which it will be plugged. The appliance should be placed on a dry and at surface. Avoid ammable or nylon-based surfaces. Avoid placing the appliance near an heater or another heat source. Turn the unit off when lling the tank and when moving the product. The base must be lled with water only. Do not add essential oils. The device is designed for open rooms. Do not place the air outlet directly towards a wall or an electrical socket. To avoid any electrical shock, do not expose the power cord to water or humid surfaces. Do not leave water when the device is switched off. Do not use the device if damaged. Do not introduce metallic objects inside the device. Do not use in a closet or other conned space. Do not wet the device. Clean it with a moist cloth and dry it carefully before plugging it back in and switching it on. Domestic injury prevention The safety of this product conforms to the relevant norms and regulations in force in the European Union. For any further information, please visit our website: www.airnaturel.com Our customer service department is available at the following email address: [e-mail] Thank you for having purchased the Humini humidier, an Air Naturel product. We hope that it will bring you complete satisfaction and improve your indoor air quality. As with all electrical appliances, it is important to maintain the device properly in order to avoid any damage or injury. Please read carefully these instructions before switching the device on and keep them for further reference. Important safety instructions

Water Cover ⑤ Fan air outlet

Downloaded from www.vandenborre.beBefore switching on the Humini device, check that the product is turned off and the front knob is in the «OFF» position.

• Place the humidier on a at surface, at least 60 cm above the oor and 10 cm from the wall.

• Fill in the tank (see instructions below).

• Plug the cord in an electrical socket.

• Turn the product on using the front knob and select the desired power.

• The Humini humidifier switches itself off automatically when the tank is empty. Humini helps in preventing from dry air symptoms by humidifying the ambient air thanks to a thin and cold steam. An air humidier ghts against dried mucus membranes, nose bleeding, rhinitis, eyes picks, dry skin, dry cough or nocturnal thirsts. In terms of hygiene and comfort, Air Naturel recommends a relative humidity between 40 and 60%. Starting the Humini

• Remove the tank (back part of the device).

• Turn over the tank, unscrew the cover (follow the “WATER” arrow) and ll the tank with cold water. Never use hot water as it could create leakage.

• Screw back the cover clockwise.

• Replace the water tank on the device. Tank lling Controls Humidier output By pressing the main button, you can adjust the humidier output as you wish.

• Touch once : the unit is ON, minimum output

• Touch twice : medium output

• Touch third : the unit is OFF. Caution : while using the unit at maximum output, it can happen that the steam falls back and creates condensation around the unit which could be wrongly identied as a leak. In order to avoid that, reduce the output level and/or place the humidier near a heating source, on a furniture more than one meter height. ~1 m

Downloaded from www.vandenborre.be• Check that the housing is not swamped.

• Do not use solvents or abrasive products when cleaning the device.

• The housing is made of ABS plastic, the use of essential oils is not recommended. Any damage following the use of essential oils will not be covered under warranty.

• Change the water in the tank at least once every 72 hours (in case of occasional usage) in order to avoid any bacteria growth. Daily maintenance

• Before any operation, unplug the device.

• Empty the water from the tank and rinse off with clear water in order to remove any eventual scale deposit.

• Dry the tank with absorbent tissue. Weekly maintenance

• Fill the tank with 200 mL of water added with a 30 mL of white vinegar.

• Dry the ultrasonic plate, clean it with a soft brush and wipe it with a soft tissue Maintenance and storage Caution Storage

• Clean as previously recommended with a white vinegar-based solution.

• Store in a dry place, preferably in its original packaging. Avoid high temperatures Recommended cleaning product Kalkattack : That cleaning product, has been developed to solve limescale problems and to purify your air! Made from natural raw materials (corn, tapioca, manioc, sweet potato, beet…), with very lowdensity of hydrogen peroxide, Kalkattack isn’t toxic either for people or for environment. This solution has three identied actions:1/ Eliminates limescale, 2/ Maintains tank water quality, 3/ Protect against rust

Downloaded from www.vandenborre.beThe product does not work properly Situation Solution The on/off light is on but no mist is produced Check the power cord. Check that the tank is correctly positioned. The on/off light is on but no mist is produced Check that the tank is lled. Check that the power knob is not set at minimum power. The mist produced has an unpleasant smell. On a new device, open the water tank and leave it aerated for 12 hours. On a used device, the smell is due to stagnant or dirty water. Clean the tank and the housing thoroughly and replace the water. The on/off light is on but the device does not work. Too much water on the ultrasonic plate : remove some water. It may also happen when moving a device full of water. Mist is produced in insufcient quantity. Dirty ultrasonic plate: clean the ultrasonic plate. Dirty or stagnant water: clean the tank and change the water. Abnormal noise. If the device has insufcient water or is not on a stable surface, a resonance can be heard. Water leakage. Check that the tank is tightly screwed and the seal (inside the tank cover) is correctly placed. The seal could have fallen when lling the device. If necessary, clean the cover with water and soap.