P203TER201 - Heating Beper - Free user manual and instructions

Product type	Fan heater
Brand	Beper
Model	P203TER201
Power supply	220-240 V ~ 50/60 Hz
Maximum power	2000 W
Heat levels	2 (1000 W and 2000 W)
Ventilation-only function	Yes, cool/cold air
Adjustable thermostat	Yes, rotary
Operation indicator light	Yes
Carrying handle	Yes
Safety distance to flammable objects	1 meter (front), 50 cm (rear)
Overheat protection	Do not cover the appliance
Use in small rooms	Not recommended without continuous supervision
Maintenance	Soft cloth slightly damp, dry thoroughly
Warranty	24 months
After-sales service	[e-mail]

Frequently Asked Questions - P203TER201 Beper

How to turn on the Beper P203TER201 heater?

Plug in the appliance, then turn the function selector to the desired position (I for 1000 W, II for 2000 W). Turn the thermostat knob clockwise to increase the temperature. The indicator light turns on.

Can I use ventilation only without heating?

Yes, set the function selector to the ✝ position (ventilation only). Turn the thermostat clockwise until the ventilation works. The air will be cool/cold.

How to turn off the appliance?

Turn the function selector to the '0' position and the thermostat knob completely counterclockwise. Unplug the plug for safety.

What safety distance should I maintain around the appliance?

Maintain a distance of at least 1 meter from the front panel and 50 cm from the rear air vents. Keep flammable objects (furniture, curtains, etc.) at least 1 meter away.

What to do if the power cord is damaged?

Do not use the appliance. Have the cable replaced by the manufacturer, its after-sales service, or a qualified person to avoid any risk.

How to clean the fan heater?

Unplug the appliance. Clean the external surface with a soft cloth slightly damp, then dry thoroughly. Never immerse in water.

Is the appliance suitable for children or vulnerable persons?

Children under 3 years old must not play near it. Children aged 3 to 8 can only turn it on/off under supervision. Persons with reduced capacities must have received full instructions. Caution: some parts become very hot.

Can I use an extension cord or adapter?

It is not recommended to use adapters, multiple sockets, or extension cords. If necessary, use only equipment compliant with safety standards.

What to do if the appliance does not heat?

Check that the function selector is on I or II, the thermostat is turned clockwise, and the appliance is plugged in. If the problem persists, contact after-sales service.

How to benefit from the 24-month warranty?

Keep the receipt and warranty certificate. In case of material or manufacturing defects, contact your retailer or send an email to [e-mail] to find the nearest authorized center.

USER MANUAL P203TER201 Beper

For further information and/or for instructions for use in other languages, please visit: beper.com

Fig.A 1 beper 2 4 3

IL PRESENTE PRODOTTO E' ADATTO SOLO A AMBIENTI CORRETTAMENTE ISOLATI O AD UN USO OCCASIONALE THIS PRODUCT IS SUITABLE FOR PROPERLY INSULATED SPACES O FOR OCCASIONAL USE ONLY

Cod.: P203TER200

REFERENCES TO THE MODEL :CODE: P203TER200 DESCRIPTION:
					Fan heater
ITEM	SYMBOL	VALUE	UNIT		Item
Heat Output					Type of heat input, for electric storage local space heaters only
Nominal heat output	P nom	2.0	KW		Manual heat charge control, with integrated thermostat
Minimum heat output	P min	0.0216	KW		Manual heat charge control with room and/or outdoor temperature feedback
Maximum continuous heat output	P Max,c	2.0	KW		Electronic heat charge control with room and/or outdoor temperature feedback
Auxiliary electricity consumption					Fan assisted heat output
At nominal heat output	el max	0	KW		Type of heat output/room temperature control
At minimum heat output	el min	0	KW		Single stage heat output and no room temperature control
In standby mode	el SB	0	KW		Two or more manual stages, no room temperature control
					With mechanic thermostat room temperature control
					With electronic room temperature control
					Electronic room temperature control plus day timer
					Electronic room temperature control plus week timer
					Other control options
					Room temperature control, with presence detection
					Room temperature control, with open window detection
					With distance control option
					With adaptive start control
					With working time limitation
					With black bulb sensor
Contact: [e-mail] - Phone: [phone]Name and address of the factory and/or legal representative: BEPER SRL - Via A.Salieri, 30-37050 Vallese di Oppeano (Verona) Italy

Avvertenze generali

Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.

Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.

The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.

The appliance can be damaged if the voltage is not correct.

If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.

Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.

Do not use the appliance if the cable or the plug shows any damages. Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.

This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.

This appliance is for household use only.

To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.

Do not use the appliance near explosives, highly flammable materials, gases or burning flames.

Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.

Warning for use

This appliance can only be used by children of 8 years of age or older, and by people with reduced physical, sensitive or mental capabilities, or with lack of experience and knowledge, provided that they have been given complete instructions concerning the safe use of the appliance and the risks related to its use.

Children must not play with the appliance. Cleaning and maintenance operations must not be carried out by children without supervision.

Children of 3 year of age or younger cannot play or remain close to the appliance unless they are constantly supervised.

Children of age between 3 and 8 years can only turn the appliance on and off, provided that the appliance has been placed or installed in its normal operating position, and that children are kept under closed surveillance, or they have been given complete instructions concerning the safe use of the appliance and the risks related to its use.

⚠ Warning: some parts of the appliance can get really hot during operation, it is necessary to pay extreme attention in the presence of children or vulnerable persons.

Carefully read this manual before operating the appliance. Do not use the appliance near bath tubs, showers, pools or other water basins.

Warning: to avoid overheating, do not cover the appliance.

Do not place the appliance immediately below a wall socket-outlet. It is possible to hear a light noise during operation of appliance, especially during first use; these light noises are normal, and are caused by the expansion and contraction of the new materials, due to heating and following cooling of the appliance.

Keep inflammable objects and materials (such as furniture, cushions, blankets, paper, cloths, curtains, etc.) at least 1 meter away from the appliance.

Keep air inlets and outlets free from objects and materials (distance of at least 1 meter from front panel and 50 cm from the back outlets). Do not leave the appliance operating unattended: make sure the appliance is off, and disconnect it from the wall socket.

⚠ Warning: the appliance is not equipped with a device to control the room temperature. Do not use the appliance in small rooms, when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

Product description Fig. A

1. Handle for transportation
2. Ambient thermostat
3. Function selector
4. Functioning indicator

Operation

Connect the plug to a suitable wall socket. Turn the function selector to the desired function.

Thermostat

Turn the thermostat knob clockwise to increase the air emission (temperature) and to start the heating or the fan. The operating lamp lights up. Turn the knob counterclockwise to decrease the temperature or turn off the heating or fan.

Heating function

Select "I" in the function selector to obtain the minimum heat level (1000 Watts). Select "II" to get the maximum heat level that can be set (2000 Watts).

Turn clockwise the thermostat knob to adjust the heat.

To reach the maximum heating level, select "2" and turn the thermostat knob clockwise.

Ventilation function

Place the function selector on ✝ (ventilation only).

The Fan heater will emit fresh air.

Adjust the thermostat clockwise until the fan starts.

To switch off, position the function selector to the "0" position and rotate the thermostat counterclockwise.

Use the handle to carry or move the fan heater.

Maintenance and cleaning

The appliance does not need any particular maintenance. If necessary, clean the outer surface with a slightly dampened soft cloth, and dry thoroughly.

Technical data

Power: 2000W

Power supply: 220-240V\~50-60Hz

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.

GUARANTEE CERTIFICATE

This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.

The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance

For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance's efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.

GUARANTEE CONDITIONS

If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

- The appliance has been used properly and for the purpose for which it has been intended.

- The appliance has not been tampered with, otherwise it is not maintainable.

- The purchase receipt shall be presented.

- The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements...) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.

In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product

Contact your distributor in your country or after sales department Beper.

E-mail [e-mail] which will forward your enquiries to your distributor.

CONDITIONS DE GARANTIE

GARANTIJAS NOSACĪJUMI

Ionic Straightening Brush

Cod.: 40.926

Ionic technology for an effective anti-frizz action Ceramic coating for best hair protection Coated bristles heads, to avoid burning of scalp Adjustable temperature up to 230°C With LCD display and rotating cable Universal voltage, ideal for traveling

Two white hair filter brushes with black textured caps, one labeled 'bepier' and the other a digital display (no text on brush or background)

Close-up of a woman with curly hair holding a white brush, smiling broadly (no text or symbols visible)

BEPER SRL