KS 1840130 - Saw Güde - Free user manual and instructions

USER MANUAL KS 1840130 Güde

Blue and black chain-link electric saw with visible blade and handle (no text or symbols)

Akku-Kettensäge KS 18-401-30

58406

GÜDE GmbH & Co. KG

Birkichstrasse 6

74549 Wolpertshausen

Deutschland

Güde

ENGLISH Please read the instructions carefully before starting the machine.

Scanned document with placeholder text and a blue 'Delete' button, likely a software error or notification.

Illustration of a blue handheld device with a black handle and red circular lens, shown in three views (1, 2, 3), alongside a smaller black device on the left (no text or symbols visible)

Two unrelated illustrations: a black electric drill bit connected to a power plug and a chain of chains drawn on it (no text or symbols)

Simple gray rounded rectangle shape with four small square cutouts (no text or symbols)

Deutsch

Technical Data / Device description / Safety Warnings / Specified Conditions of Use / Emergency procedure / Symbols / Maintenance / Disposal / Guarantee / Service 26

Français

Circular icon with a lock symbol inside, featuring a red ring and white arrow (no text or symbols)

Blue-handled cleaning brush with attached sensor and camera, showing a close-up of the brush's handle (no text or symbols visible)

5 OREGON OE B

6 1 2 2 OREGON OE B

7 OREGON OE B

8 OREGON

9 OREGON

10 11 12

Circular icon with a lock and gear symbol, no text or symbols present

Close-up of a mechanical component with a padlock and an arrow indicating a process or assembly (no text or symbols visible)

TIP OREGON OE 2-3 mm √

EN Repeat tensioning of new chain after approx. 5 cuts. Check chain tensioning regularly during operation

Symbolic icon showing a lock inside a shield with a circular arrow, representing security or security (no text or symbols present)

1 10 min

2 MAX MIN OIL min OIL min MIN

3

4 OIL MAX MIN OIL min

5 C

Diagram showing a chainsaw cutting a circular saw with labeled arrows and components

Illustration of a blue saw cutting through a black tool, with a circular cutter nearby (no text or symbols)

Diagram showing a blue tool interacting with a black curved line and a circular object, no text or symbols present

Illustration of a blue-handled saw cutting through water with a downward arrow indicating motion (no text or symbols)

Line drawing of a wooden log being handled with a wooden post (no text or symbols)

Safety warning illustration showing a person falling on a slope next to a broken pipe and a circular gear mechanism with hazard symbols.

KICKBACK

STOP

Illustration of a person using a blue tool to cut a saw, with motion arrows indicating direction (no text or symbols)

Illustration of a blue gear with a black cross and arrow, no text or symbols present

Illustration of a blue chainsaw cutting through circular debris with a black crosshair overlay (no text or symbols)

1 min 2 ½

1 2 1 45° 1/3

2 min 50 mm 2/3 3

TIP

3

graph TD
    A["Start"] --> B["Step 1: Chainaw"]
    B --> C["Step 2: Flare"]
    C --> D["Step 3: Flare"]
    D --> E["End"]

Illustration of a blue chainsaw crossing over water with motion arrows, no text or symbols present

Illustration of a blue-handled tool cutting through water with a black cross, showing fluid flow (no text or symbols)

Illustration of a wooden log rolling down with a chainsaw and moving a ball, showing motion direction (no text or symbols)

1 2 1/3 2/3

1 2 2/3 1/3

Diagram illustrating a device interacting with an eye, alongside three battery cells showing charge distribution.

1

2 CLICK 100%

Blue handheld device with a black connector being inserted, labeled '3 4' (no text or symbols on the device itself)

Diagram of a chain-link robotic device with a gear and arrow indicating flow or movement (no text or symbols)

Blue chain-linker with a gear handle and blade, shown in action (no text or symbols)

6 | START 1 2

Blue handheld electric shaver with attached black casing and cable (no visible text or symbols)

1 AUTOSTOP 2 STOP 3 4 5 RE START 1 2

1 | STOP

Close-up of a blue and black handheld device handle with a white arrow pointing to a red circular feature (no text or symbols visible)

2

Blue-handled chain-linker with a gear handle and blade, showing blade extension (no text or symbols)

3

Illustration of a blue-handled chain saw cutting a gray blade with an arrow indicating direction (no text or symbols)

OREGON OE B

Close-up of a blue industrial chain-linker with attached black handle and gray handle (no visible text or symbols)

Diagram showing a mechanical component with a close-up view of its internal structure and a close-up of a bolt, labeled in English.

2

Pure mechanical part diagram without any text, numbers, or symbols

3

Two gray plastic sheet metal components with cutouts and holes, connected by a double-headed arrow indicating rotation (no text or symbols)

4

4 C Lock

3D rendered image of a gray elongated object with a green checkmark below it (no text or symbols)

1

Illustration of a blue-handled chain-linking device with a black handle and gear, shown with an arrow indicating motion (no text or symbols present)

2 OIL

3

Technische Daten

The specified vibration emission value has been measured according to a standardised test procedure and can be used to compare one power tool with another.

^1) Measured according to 2000/14/EG + E_2005/88/EC, Uncertainty K = 3 dB (A)

2) Measured according to EN 60745, Uncertainty K=1.5 m/s ^2

The specified vibration emission value can also be used for an introductory assessment of the exposure.

Warning The vibration emission value may differ from the specified value during the actual use of the power tool, depending on the way the power tool is used.

Try to keep the exposure to the vibrations as low as possible. Steps to reduce vibration exposure include wearing gloves when using the tool and limiting working hours. All parts of the operating cycle must be taken into account (for example, times when the power tool is switched off and times when it is switched on but idling).

Device description

9 5 6 1 2 7 8 10 13 14 11 3 4

1 Trigger Release
2 On/off Button
3 Chain Drive
4 Bar Groove
5 Rear Handle
6 Battery
7 Front handle
8 Front Hand Guard / Chain brake lever
9 Chain Lubricant Cap
10 Guide Bar
11 Saw Chain
12 Guide Bar Cover
13 Chain tensioner wheel
14 Chain Catcher

Read and understand the operating instructions before using the appliance. Familiarise with the control

elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties.

The operator is responsible for accidents or risks to third parties. Persons over 18 years of age can only work on the appliance. An exception includes youngster trained in order to reach knowledge under supervision of the trainer during occupational education.

In case of any doubts about connection and operation refer please to our customer center

The operating personnel must have received sufficient training in use, setup and maintenance.

Specified Conditions of Use

The battery chain saw may be used only for cutting wood – always across the grain. Respecting technical data and safety precautions.

Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Requirements for operating staff

The operating staff must carefully read the Operating Instructions before using the appliance.

Qualification: Apart from the detailed instructions by a professional, no special qualification is necessary for appliance using.

Minimum age: Persons over 18 years of age can only work on the appliance. An exception includes youngsters trained in order to reach knowledge under supervision of the trainer during occupational education.

Training: Using the appliance only requires corresponding training by a professional or the Operating Instructions. No special training is necessary.

The operator is responsible for accidents or risks to third parties.

Observe to keep out of dangerous zone

Residual Risk

Risk of injury

Contact with the saw chain can cause casualties. Never touch moving chain by hands.

Danger of kickback!

Kickback can lead to casualties.

Danger of burns!

Chain and guiding groove warm up in operation.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly as possible. Protect the injured person from further harm and calm them down. For the sake of eventual accident, in accordance with DIN 13164, a workplace has to be fitted with a first-aid kit. It is essential to replace any used material in the first-aid kit immediately after it has been used.

If you seek help, state the following pieces of information

1. Accident site

2. Accident type

3. Number of injured persons

4. Injury type(s)

Symbols

Caution!

Please read the instructions carefully before starting the machine.

Take the replaceable battery from the appliance before any extension, cleaning and servicing works.

Warning against dangerous kickback

Keep distance of persons Observe to keep out of dangerous zone

Always use chain saw two-handed

Not use one-handed

Keep dry at all times. Never expose tool to rain.

Keep the machine out of reach of children.

Fire, sparks, naked flames and smoking are forbidden.

Chain lubrication

Chain running direction

Weare a protective helmet.

Wear goggles. Wear ear protectors.

Wear protective gloves.

Wear safety cut through resistant shoes with safety sole and steel toe

Wear protective clothing with cut through resistant ply!

1

Guaranteed sound power level

Safety class II (double insulation)

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

European Conformity Mark

Battery, Battery Charger

Charger to be used in closed spaces only.

Protect the battery against heat and fire.

Protect the battery against water and moisture.

Protect the battery against temperatures above 40°C.

Class II tool.

Do not throw the batteries in household waste.

Li-Ion

Deliver the batteries to a collection centre of old batteries where they will be recycled in an environmentally friendly way.

Any damaged or disposed electric or electronic devices must be delivered to appropriate collection centres.

European Conformity Mark

General Power Tool Safety Warnings

Warning

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool and battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

4) Power tool use and care

f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5) Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6) Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained..

Chain saw safety warnings

- Keep all parts of the body away from the saw chain when the chain saw is operating. Before you start the chain saw, make sure the saw chain is not contacting anything. A moment of inattention while operating chain saws may cause entanglement of your clothing or body with the saw chain.

- Always hold the chain saw with your right hand on the rear handle and your left hand on the front handle. Holding the chain saw with a reversed hand configuration increases the risk of personal injury and should never be done.

- The power tool must be held by the insulated grip surfaces, because the saw-chain can touch hidden wires. Saw chains touching a live wire make metal parts of the power tool live and could give the operator an electric shock.

- Wear protective glasses and ear protectors. Further, wearing head, hand and leg protection equipment is recommended. Adequate protective equipment will reduce personal injury from flying debris or accidental contact with the saw chain.

- Do not work on trees with the chainsaw. There is a risk of injury when working on a tree.

- Always keep proper footing and operate the chain saw only when standing on fixed, secure and level surface. Slippery or unstable surfaces may cause a loss of balance or control of the chain saw.

• When cutting a limb that is under tension, be alert for spring back. When the tension in the wood fibres is released the spring loaded limb may strike the operator and /or throw the chain saw out of control.
• Use extreme caution when cutting brush and sap - lings. The slender material may catch the saw chain and be whipped toward you or pull you off balance.
• Carry the chain saw by the front handle with the chain saw switched off and away from your body. When transporting or storing the chain saw, always fit the guide bar cover. Proper handling of the chain saw will reduce the likelihood of accidental contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and changing accessories. Improperly tensioned or lubricated chain may either break or increase the chance for kickback.
• Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery causing loss of control.
• Cut wood only. Do not use chain saw for purposes not intended. For example: do not use chain saw for cutting metal, plastic, masonry or non-wood building materials. Use of the chain saw for operations different than intended could result in a hazardous situation.

Causes and operator prevention of kickback:

Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up and back towards the operator.

Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the operator.

Either of these reactions may cause you to lose control of the saw which could result in serious personal injury. Do not rely solely on the safety devices with which the chain saw is equipped. As a chain saw user, you should take several steps to keep your cutting jobs free from accident or injury.

Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below:

• Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both hands on the saw and position your body and arm to allow you to resist kickback forces. Kickback forces can be controlled by the operator, if proper precautions are taken. Do not let go of the chain saw.
• Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact and enables better control of the chain saw in unexpected situations.
• Only use replacement bars and chains specified by the manufacturer. Incorrect replacement guide bars and chains may cause chain breakage and/or kickback.
• Follow the manufacturer's sharpening and maintenance instructions for the saw chain. Decreasing the depth gauge height can lead to increased kickback.

A first-time user is advised at the least to practice cutting logs on a sawhorse or frame.

When sawing on a slope, always stand above the tree trunk. To maintain full control at the moment of „sawing through“, nearing the end of the cut reduce the contact pressure without loosening your grip on the chain-saw handles. Make sure that the saw-chain does not touch the ground. After finishing the cut, wait for the saw-chain to stop moving before extracting the chainsaw from the cut. Always switch off the chain saw motor before moving to the next tree.

Spiked Bumper

When sawing, press the chain saw forward so that the „claw“ bites into the bark. Lifting the rear handle up or down in the direction of the cut reduces the physical strain during sawing. When making a cut, the claw stop can also be used as a pivot point and is very useful in keeping the body of the chainsaw stable during cutting.

Chain Brake

To reduce the risk of injury, the chain must stop immediately once the chain brake lever is pressed towards the hand, as shown in the images. This can not, however, prevent a rebound. The proper function of the chain brake must be checked each time before the chain saw is used.

Chain Catcher

This prevents the chain from being flung towards the user if it comes loose or breaks.

Battery

Risk of fire! Risk of explosion!

Never use damaged, defective or deformed accumulators. Never open or damage the accumulator or let it fall on the ground.

Never charge the battery in an environment with acids and easily flammable materials.

Protect the battery against heat and fire.

Battery to be used at the ambient temperatures between 10^ C and +40^ C only.

Never put the battery on heaters and do not expose it to strong sunlight for a long time.

After being subject to heavy load, let the battery cool down first.

Short circuit - do not bridge the accumulator contacts with metal parts.

The accumulator must be packaged (plastic bag, box) or accumulator contacts must be sealed up for accumulator disposal, transport or storage.

The Güde charger to be used only to charge the battery. There can be malfunction or fire if different chargers are used.

Vapours may leak out in case of unauthorised use or when using a damaged accumulator. Bring fresh air and seek medical advice if experiencing difficulties. Vapours may irritate the respiratory system.

Working Instructions

Accumulators are supplied partially charged and must therefore be fully charged before being used for the first time.

• Charge the accumulator when the appliance is running slowly or stops.
• A li-ion battery may be charged at any time without any shortening of its life. Charging process interruption will not damage the accumulator.
• A li-ion battery is protected by the Electronic Cell Protection against deep discharge.
• A significantly shorter operating time of a charged battery means the battery life is over and the battery must be replaced.

Li-Ion

Dispose of the batteries in an environmentally friendly manner.

Li-ion batteries are subject to the special disposal obligation. Have any defective batteries disposed of by a specialised shop. The battery must be taken out before the appliance is scrapped. Damaged batteries may harm the environment and your health if toxic vapours or liquids leak out of such batteries. Therefore, never send a defective battery by post, etc. Please contact your local recycling centre.

Dispose of the batteries when discharged. We recommend applying an adhesive tape on the poles to protect them against short circuit. Never open the battery.

Maintenance

Take the replaceable battery from the appliance before any extension, cleaning and servicing works.

Carry out a visual inspection before switching the appliance on.

The appliance must not be used if damaged or safety equipment is defective. Replace any worn-out and damaged parts.

If the device is defective, the repair has to be made exclusively by the customer service. Use only original accessories and original spare parts. Components for which there are no instructions for exchanging should be replaced by the manufacturer only.

Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries.

Disposal

Do not dispose of electrical appliances in household waste.

According to the European Directive 2012/19/EU on waste electrical and electronic equipment and transposition into national law, used electrical equipment must be collected separately and sent for environmentally sound recycling. Recycling alternative to the return request: As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment must make sure that the equipment is properly disposed of if he no longer wants to keep it. The old equipment can be returned to a suitable collection point that will dispose of the equipment in accordance with the national recycling and waste disposal regulations. This does not apply to any accessories or aids without electrical components supplied with the old equipment.

Guarantee

Warranty period of 12 months applies to commercial use and 24 months applies to private use and commences on the day of purchase of the device.

The guarantee solely covers inadequacies caused by material defect or manufacturing defect. Original payment voucher with the sales date needs to be submitted for any claim in the guarantee period.

The guarantee does not cover any unauthorised use such as appliance overloading, use of violence, damage as a result of any unauthorised interference or caused by foreign items. Failing to follow the operating and assembly instructions and common wear are also not included in the guarantee.

Service

Do you have any technical questions? Any claim? Do you need any spare parts or operating instructions? We will quickly help you and without needles bureaucracy at our web pages at www.guede.com in the Servicing part. Please help us be able to help you. In order to identify your device in case of claim we need the serial No., product No. and year of production. All this data can be found on the type label. To always have these data at hand, please enter them below.

Serial No.:

Art. No:

Year of production:

Inspection and maintenance plan

Generally Complete saw		Regularly clean the outer partLet regularly checked by authorized workshop
	Plastic bodySaw ChainChain saw barChain saw wheelChain Brake	Check for cracks and fissuresLet regularly sharpenClean regularlyClean regularlyRegular functional test
Before any start-up Saw Chain		Check for damages and sharpness
	Chain saw barChain lubricationChain BrakeFollow-up brakeOn/off ButtonOil tank cap	Check the chain tensionFunctional testFunctional testFunctional testFunctional testCheck for tightnessLet regularly checked by authorized workshop
After every take out of service	Chain saw barBar fixture	Clean the oil top-up openingClean above all guiding oil groove
Storage Chain oil tank	Saw Chain / Chain saw barComplete saw	DrainDismount, clean and lubricate slightly by oil Clean the saw guiding grooveStore safely in dry room Have the battery chain saw checked by an authorized workshop after long term storage (remaining oil can be resinous and clog the oil pump valve)

Defects searching

Failures Tracing Causes Removal
The saw does not work Electric motor does not run or stops.		Voltage missing Reinsert battery
		Battery is defective	Insert new battery
		Battery compartment defective	Akkuschacht durch Fachwerkstatt oder Güde-Service erneuern lassen
		Chain brake activated Release chain brake (see chapter „Operation“) Activated power breaker Check supply line, consult specialist workshop.
Not sufficient output Low dilatability Worn-down carbon brushes Have the carbon brushes			replaced by a specialist workshop.
Missing chain lubrication Chain is not lubricated Empty oil tank, Dirty guiding oil groove Fill up the oil tank. Clean the oil guide groove on the chain blade.
Chain Brake	Chain does not stop quickly	Braking system worn.	Consult a specialist workshop immediately.
Follow-up brake	Saw chain runs out	Worn-down carbon brushes	Have the carbon brushes replaced by a specialist workshop.

Akumulator, Ładowarka

Translation of the EC-Declaration of Conformity

We, hereby declare the conception and construction of the below mentioned appliances correspond - at the type of construction being launched - to appropriate basic safety and hygienic requirements of EC Directives.

In case of any change to the appliance not discussed with us the Declaration expires.