IAN 332608 - Watch AURIOL - Free user manual and instructions

USER MANUAL IAN 332608 AURIOL

Usage and safety instructions

IAN 332608_1904

DE

AT

CH

Usage and safety instructions 25

Batteriewechsel (SR626SW)

Usage and safety instructions

Table of contents

Table of contents 25

Introduction 26

Intended use 26

Scope of delivery 26

Important safety information important safety information

Important safety information for users -26

Important safety information for the batteries....-27 -

Band shortening for the model 3 -27

Band shortening for the model 4 -27

Band shortening instruction for

the models 5+6. -28-

Time setting for the models 1-6 -28

Time setting for the models 7 + 8 -28-

Bezel 29-

Replacement of battery (SR626SW) -29-

Cleaning instructions 29

Water resistance 29

Disposal 29

Disposal of the electronic device 29

Disposal of the batteries 29

Recycling 30

Paperboard. 30

Waste disposal 30

digi-tech gmbh warranty 30

Warranty conditions -30

Warranty period and defects liability -30-

Scope of the warranty 30

Warranty claim procedure -31

Service. 32

Supplier 32

WATCH

Introduction

Congratulations on the purchase of your new wristwatch. You have chosen a high quality product. The instruction manual is part of the product- it contains important information about safety, use and disposal. Read the manual with all usage and safety notes before using the watch. Only use the watch in the intended way and for the intended applications. If the watch is given to someone else, include all documentation with the watch. Please keep the packaging and the instruction manual for future reference.

Intended use

This watch is intended for time display and the described additional features. Any other use or modification of the electronic appliance does not comply with the intended uses. The manufacturer is not liable for damages caused by improper use or misuse. The device is not intended for commercial use.

Scope of delivery

Please note: Check the scope of delivery after purchase. Please ensure that all parts are included and undamaged.

• 1 x Wristwatch incl. battery
• 1 x Removable link for model 4
• 2 x Removable links for models 5 + 6
• 1 × Band shortening tool for models 5 + 6
• 1 x Instruction manual

Important safety information

Important safety information for users

WARNING!

RISK OF INJURY!

This device may be used by persons (including children over 8 years of age) with reduced physical, sensory or mental abilities or lack of experience and knowledge, if they are supervised or instructed regarding the safe use of the device and understand the dangers that may arise.

Children may not play with the device. Cleaning and user maintenance of the device may not be performed by children without supervision. Keep packaging films out of the hands of children. There is a danger of suffocation.

Important safety information for the batteries

WARNING!

HEALTH HAZARD!

RISK OF EXPLOSION!

Keep batteries out of reach of small children. If a battery is swallowed, you must seek medical attention immediately. Batteries/rechargeable batteries must always be inserted in the correct polarity. Never attempt to recharge non-rechargeable batteries. Never short-circuit or attempt to open batteries. Never throw batteries into fire as they may explode. Improper use of the battery can lead to explosion or leakage. If the battery leaks, avoid contact with skin, eyes and mucous membranes. Use gloves. If you are exposed to battery acid, rinse the affected areas with plenty of clean water and immediately seek medical attention. Remove discharged batteries from the device as they present an increased risk of leakage.

Band shortening for the model 3

The band includes a moveable clasp for easy band shortening.

1. Open the safety clasp.
2. Push a suitable tool into the opening on the clasp and lever the clasp open.
3. Move the clasp to the required length and let it snap into place on the horizontal grooves on the back side of the strap.
4. Securely re-engage the clasp (using a tool if necessary).
5. Close the safely clasp.

Band shortening for the model 4

Your watch band is equipped with an additional link with a fastener to simplify band shortening. Open the fastener of the band and of the additional link. Remove the additional link and re-close the fastener of the band.

-27

Band shortening instruction for the models 5 + 6

Band shortening can be accomplished by removing links. Open the band clasp safety and open the clasp. The band is held to the clasp by a spring bar.

Image 1. Compress and remove the spring bar by using a pointed tool. Now place the watch face down on a soft surface. Image 2. The links that can be removed are marked with an arrow. Image 3. Place the band in the band shortening tool in such a way that the pointed end of the tool points directly at the metal rod and the metal rod can be pushed out in the direction of the arrow. Carefully turn the screw clockwise until the metal rod is pushed out a small distance. The rod can now be pulled out (using pliers if necessary). The strap can now be taken disassembled. Remove as many links as necessary using this method. Reinsert the rod in the opposite direction of the arrow and push it back into the band. The strap and clasp can now be reassembled.

A replacement tip for the tool is included in the bottom of the tool.

An instructional video is available for online viewing at the following URL:

http://specials.lidl.com/videos/nou9nohN/

...or simply scan the following QR code:

Time setting for the models 1-6

Carefully pull the crown out all the way. Turn the crown clockwise or counter clockwise to set the time. To finish the setting press the crown back in all the way.

Time setting for the models 7 + 8

To set the time, carefully pull the crown out all the way. Turn the crown clockwise or counter clockwise to set the time. Carefully press the crown back in halfway to the case. The date can be set by turning the crown. To finish the setting press the crown back in all the way.

Bezel

2-LD5179-5

Replacement of battery (SR626SW)

Battery replacements must be performed by an expert to avoid damaging the case or gaskets.

Cleaning instructions

Clean the wristwatch with a soft, dry and lint-free cloth. A glasses cleaning cloth is ideal.

Water resistance

Water resistant up to 5 bar. The bar value specifies the atmospheric overpressure which is applied during testing (DIN 8310).

Disposal

This device and all the packaging materials are recyclable. Please dispose of them separately for better waste handling.

Disposal of the electronic device

This wristwatch must not be disposed of in the normal household waste. In the interest of the environment, when your device has reached the end of its usefulness, do no throw it in the normal household trash. Dispose of it in the proper and correct way. You can find out about collection sites and their business hours from your public administration. Please adhere to applicable requirements.

Disposal of the batteries

Defective or spent batteries/rechargeable batteries must be recycled in accordance with directive 2006/66/EC and its revisions. Return batteries, rechargeable batteries or the device at the available collection sites.

Improper disposal of batteries / rechargeable batteries causes environmental damage!

Batteries / rechargeable batteries may not be disposed of in normal household waste. They may contain toxic heavy metals and are subject to hazardous waste treatment. The chemical symbols of the heavy metals are as follows: Cd = Cadmium, Hg = Mercury, Pb = lead.

-29

Therefore, please dispose of spent batteries / rechargeable batteries at a communal collection site.

Recycling

The product packaging consists of recyclable materials. Please dispose of them properly at the available collection sites.

Paperboard

The packaging consists of noncorrugated fibreboard (paperboard).

Waste disposal

Dispose of the packaging in an environmentally responsible fashion. Please note the marking of the different packaging materials and separate them if applicable.

digi-tech gmbh warranty

This wristwatch includes a 3 year warranty starting on the day of purchase. In case of defects of this wristwatch you have, by law, certain rights regarding the vendor of the watch. These rights are not changed by the warranty which is described in the following paragraphs.

Warranty conditions

The warranty duration starts on the date of purchase. Please keep the original receipt in a safe place. The receipt is needed as a proof of purchase. If a defect occurs in the wristwatch within 3 years, the wristwatch will be repaired or replaced (according to our choice) free of charge. This warranty requires that, within the 3 year warranty period, the wristwatch and the receipt can be made available to us along with a short written description of the defect and when it occurred. If the defect is covered by the warranty, you will receive the repaired wristwatch or a new watch. Repair or replacement does not cause the warranty period to restart.

Warranty period and defects liability

The warranty period is not increased by the defect liability. This also applies to repaired or replaced parts. If defects are noticed at the time of purchase they must be reported immediately upon unpacking the item. Paid repair may be available after the end of the warranty period.

Scope of the warranty

The wristwatch was manufactured according to strict quality guidelines and was carefully inspected before delivery. The warranty does not include parts that experience normal wear and tear and can thus be seen as wear parts or fragile parts that are damaged. Examples include Switches, Batteries or parts made of glass.

-30

This warranty becomes void if the wristwatch is damaged, is not used in the recommended way or is improperly repaired. For proper use of the wristwatch all instructions in this manual must be adhered to exactly. Use of the wristwatch in a way that is discouraged in the manual must be avoided. The wristwatch is not intended for commercial use. Abusive or improper use, excessive force and changes that are made by non-authorized repair centers will void the warranty.

Warranty claim procedure

To ensure that your call is processed in a fast and efficient manner please note the following directions:

• Have your receipt (as proof of purchase) and the article number (332608_1904) handy.
  The article number can be found on the type label, an engraving, the front page of the manual (bottom left) or a sticker on the back side or bottom side of the case.
  In case defects occur, please first contact the service center (see below) by phone or email.

Visit www.lidl-service.com to download this and many other manuals, product videos and software.

With this QR-Code you can reach the Lidl

Service-Site

(www.lidl-service.com) directly and you can

open your manual by entering the article

number

(332608_1904).

Service

Please note that the following address is not a service address.

Please first contact the service address (see above).

Name: digi-tech gmbh

Street: Valterweg 27A

Town: DE-65817 Eppstein

Country:GERMANY

-32

digi-tech gmbh

Valterweg 27A

DE-65817 Eppstein

GERMANY