ManualGo.com 
KD30NNWF0N - Fridge SIEMENS - Free user manual and instructions
Find the device manual for free KD30NNWF0N SIEMENS in PDF.
Download the instructions for your Fridge in PDF format for free! Find your manual KD30NNWF0N - SIEMENS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KD30NNWF0N by SIEMENS.
USER MANUAL KD30NNWF0N SIEMENS
These repair hints support consumer to repair appliances by himself according to the applicable eco-design regulation (as of 03/2021). They contain information how to exchange defined spare parts including warnings and risks. In case of questions, please contact our customer service. We will only be liable for damages if the repair hints have been followed properly.
1.2 Explanation of symbols
The warning levels consist of a symbol and a signal word. The signal word indicates the severity of the danger. Warning level Meaning Danger Non-observance of the warning message will result in death or serious injuries. Warning Non-observance of the warning message could result in death or serious injuries. Caution Non-observance of the warning message could result in minor injuries. Notice Non-observance of the warning message could result in damage to property. Table1: Danger levels
1.2.2 Hazard symbols
Hazard symbols are symbolic representations which give an indication of the kind of danger. The following hazard symbols are used in this document: Hazard symbol Meaning General warning message Danger from electrical voltage Risk of explosion Danger of cuts Danger of crushing Concerning this document 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page128of601Hazard symbol Meaning Danger from hot surfaces Danger from strong magnetic field Danger from non-ionizing radiation Table2: Hazard symbols
1.2.3 Structure of the warnings
Warnings in this document have a standardised appearance and a standardised struc- ture. Danger Type and source of danger! Possible consequences of ignoring the danger / warning.
Measures and prohibitions for preventing the danger. The following example shows a warning that warns against electric shock due to live parts. The measure for avoiding the danger is mentioned. Danger Risk of electric shock due to live parts! Death by electrocution
Disconnect appliances from electrical supply at least 60 seconds before starting repairs.
1.2.4 General symbols
The following general symbols are used in this document: Gen. symbol Meaning Identification of a special tip (text and/or graphic) Identification of a simple tip (only text) Identification of a link to a video tutorial Gen. symbol Meaning Identification of required tools Identification of required preconditions Identification of a condition (if ..., then ...) Identification of a result Start Identification of a key or button [00123456] Identification of a material number Status Identification of displayed text / window (in the appliance's display) Table3: General symbols Concerning this document 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page129of601Safety
2.1 General Safety instructions
2.1.1 All domestic appliances
Risk of electric shock due to live parts! ¡ Errors by repairs involving electrical components can lead to electrical shock! ¡ Disconnect the appliance from the mains for at least 60 seconds before starting work. ¡ After the repair have a safety test according VDE 0701 or country-specific regula- tions performed. Risk of injury from sharp edges! ¡ Wear protective gloves. Risk of crushing during repair, maintenance, troubleshooting and service due to heavy and moving components ¡ Wear protective shoes. ¡ Secure heavy components from falling down. ¡ Do not stick body parts into moving components. Risk to the appliance's safety / function! ¡ Only use original spare parts. Risk of damage to electrostatically sensitive components (ESDs)! ¡ Do not touch the modules, including connections and conductor paths. Safety 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page130of601Tools and aids Designation Details Images Protection cloth [00342013] 60cm x 50cm Slotted screwdriver Blade 2.4mm x 0.4mm x 60mm, in the kit [00341820] Special tool [00342180] Suction cup [00342224] Ø50 mm Torx Bit TX20 [00340865] 6,3mm (1/4") Slotted screwdriver Blade 10mm x 1.6mm x 200mm Tools and aids 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page131of601Repair
4.1 Replacing door gasket
Prerequisite: Door is open.
4.1.1 Removing door gasket
1. Release door gasket from the groove on right and left corner.
2. Pull out door gasket from groove.
Door gasket is removed.
4.1.2 Installing door gasket
Thickness of new door gasket may deviate slightly from thickness of old door gasket. This will not affect closing behavior and long-term function. If your appliance has adjustable hinges or hinge attachments, you can optimize the closing behavior subsequently. Small side holes in door gasket are functional (required for ventilation). These are not production faults. Repair 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page132of6011. Check groove for gasket for damage.
If groove for gasket is it is damaged. - Contact customer service.
Slight deformation of door gasket is normal and does not affect its function. It is recommended to straighten door gasket before insert- ing it into appliance. Heat door gasket with a hair dryer or hot water and manually reshape it.
4. Push corners of gasket at the top and bottom to the groove.
Appliance door removal operation should only be carried out by trained specialists.
To move the appliance, two people are required.
Use only suitable tools and equipment. Caution Sharp edges! Cut injuries
Wear protective gloves. Warning Slipping of tilted appliances! Bone fractures / crush injuries
Secure appliances against slipping. Caution Risk of falling parts due to released screws! Injury because of falling parts.
Secure component from falling down. Notice Risk of falling parts due to released screws! Damage to other parts of the appliance or at customers home e.g. bot- tom.
Secure component from falling down. Prerequisite: Appliance is disconnected from power supply. Appliance interior fittings are removed.
4.2.1 Removing door upper hinge
1. Place appliance on the back side.
5. Unscrew two screws (5).
6. Remove upper hinge (6).
Upper hinge is removed.
Appliance door removal operation should only be carried out by trained specialists.
To move the appliance, two people are required.
Use only suitable tools and equipment. Caution Sharp edges! Cut injuries
Wear protective gloves. Warning Slipping of tilted appliances! Bone fractures / crush injuries
Secure appliances against slipping. Caution Risk of falling parts due to released screws! Injury because of falling parts.
Secure component from falling down. Notice Risk of falling parts due to released screws! Damage to other parts of the appliance or at customers home e.g. bot- tom.
Secure component from falling down. Danger Risk of electric shock due to live parts! Danger to life through electric shock in case of improper repair
Electric parts should be repaired by a qualified electricians.
After the repair have a safety test according VDE 0701 or country- specific regulations performed. Danger Risk of electric shock due to live parts! Death by electrocution
Disconnect appliances from electrical supply at least 60 seconds before starting repairs. Prerequisite: Appliance is disconnected from power supply. Appliance interior fittings are removed.
4.3.1 Removing door upper hinge
1. Place appliance on the back side.
3. Disconnect electrical connection (3)
4. Unscrew ground connection screw (4).
5. Remove cable protection (5).
6. Unscrew the screw (6)
Upper hinge is removed.
Appliance door removal operation should only be carried out by trained specialists.
To move the appliance, two people are required.
Use only suitable tools and equipment. Caution Sharp edges! Cut injuries
Wear protective gloves. Warning Slipping of tilted appliances! Bone fractures / crush injuries
Secure appliances against slipping. Caution Risk of falling parts due to released screws! Injury because of falling parts.
Secure component from falling down. Notice Risk of falling parts due to released screws! Damage to other parts of the appliance or at customers home e.g. bot- tom.
Secure component from falling down. Prerequisite: Appliance is disconnected from power supply. Appliance interior fittings are removed. Door upper hinge is removed.
1. Remove fridge compartment door (1).
2. Unscrew two screws (2).
3. Remove middle hinge (3).
Middle hinge is removed.
Appliance door removal operation should only be carried out by trained specialists.
To move the appliance, two people are required.
Use only suitable tools and equipment. Caution Sharp edges! Cut injuries
Wear protective gloves. Warning Slipping of tilted appliances! Bone fractures / crush injuries
Secure appliances against slipping. Caution Risk of falling parts due to released screws! Injury because of falling parts.
Secure component from falling down. Notice Risk of falling parts due to released screws! Damage to other parts of the appliance or at customers home e.g. bot- tom.
Secure component from falling down. Prerequisite: Appliance is disconnected from power supply. Appliance interior fittings are removed. Upper hinge is removed. Middle hinge is removed.
1. Remove freezer compartment door (1).
Door lower hinge is removed.
Pull out shelf. Shelf is removed.
4.7.1 Removing bottle tray
Pull out bottle tray. Bottle tray is removed.
4.7.2 Installing bottle tray
Lift door rack upwards. Door rack is removed.
Frozen food container is removed.
Containers are removed.
Extendable container is removed.
Install in reverse order. Repair 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page146of6014.12 Replacing LED spot light Required tools: Special tool [00342180] Your appliance features a maintenance-free LED light. These lights may be repaired by customer service or authorised techni- cians only! Danger Risk of electric shock due to live parts! Danger to life through electric shock in case of improper repair
Electric parts should be repaired by a qualified electricians.
After the repair have a safety test according VDE 0701 or country- specific regulations performed. Danger Risk of electric shock due to live parts! Death by electrocution
Disconnect appliances from electrical supply at least 60 seconds before starting repairs. Caution Sharp edges! Cut injuries
Wear protective gloves. Prerequisite: Appliance is disconnected from power supply. Door is open.
2. Unplug electrical connections of LED spot light.
LED spot light is removed.
Install in reverse order. Repair 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page147of6014.13 Replacing LED top light Required tools: Slotted screwdriver Blade 2.4mm x 0.4mm x 60mm, in the kit [00341820] Your appliance features a maintenance-free LED light. These lights may be repaired by customer service or authorised techni- cians only! Danger Risk of electric shock due to live parts! Danger to life through electric shock in case of improper repair
Electric parts should be repaired by a qualified electricians.
After the repair have a safety test according VDE 0701 or country- specific regulations performed. Danger Risk of electric shock due to live parts! Death by electrocution
Disconnect appliances from electrical supply at least 60 seconds before starting repairs. Caution Sharp edges! Cut injuries
Wear protective gloves. Prerequisite: Appliance is disconnected from power supply. Door is open. Upper interior fittings are removed.
4.13.1 Removing LED light
1. Move the LED light to the left side.
LED light electrical connection is disconnected.
2. Release LED light hooks.
Install in reverse order. Repair 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page149of6014.14 Replacing LED side bar light Required tools: Suction cup Ø50 mm [00342224] Your appliance features a maintenance-free LED light. These lights may be repaired by customer service or authorised techni- cians only! Danger Risk of electric shock due to live parts! Danger to life through electric shock in case of improper repair
Electric parts should be repaired by a qualified electricians.
After the repair have a safety test according VDE 0701 or country- specific regulations performed. Danger Risk of electric shock due to live parts! Death by electrocution
Disconnect appliances from electrical supply at least 60 seconds before starting repairs. Caution Sharp edges! Cut injuries
Wear protective gloves. Prerequisite: Appliance is disconnected from power supply. Door is open. Fridge compartment shelves are removed.
4.14.1 Removing LED side bar light
1. Stick the suction cup on the upper third of LED side bar light.
Repair 2021-03-10_9001631455 Copyright by BSH Hausgeräte GmbH Page150of6012. Pull suction cup with forward LED side bar light in one rotary movement.
3. Disconnect electrical connection of LED side bar light.
LED side bar light is removed.
