Elements Door - Smart Home GIGASET - Free user manual and instructions

Product Type	Smart door/window sensor
Brand	Gigaset
Model	Elements Door
Category	Smart Home
Dimensions (approx.)	30 x 80 x 20 mm
Weight (approx.)	30 g (with battery)
Power Supply	1 lithium battery 3.0 V (CR123A or CR17345)
Battery Life	Up to 2 years (depending on use)
Radio Range (indoor)	Up to 50 m
Radio Range (outdoor)	Up to 300 m
Operating Temperature	+5 °C to +45 °C
Humidity	Do not expose to moisture (not waterproof)
Mounting	Included double-sided adhesive tape or screws
Usage	Dry indoor only
Main Functions	Detects opening/closing of door or window, notification via Gigaset Elements app
Communication	Proprietary wireless radio (868 MHz)
Compatibility	Requires Gigaset Elements security pack (hub)
Care and Cleaning	Wipe with a damp or antistatic cloth; do not use solvents or a dry cloth
Safety	Audible alarm when triggered (via pack siren)
Warranty	24 months (wear parts: 6 months)
Batteries	Non-rechargeable lithium battery, replace with same model
Package Contents	Sensor, adhesive tape, screws and wall plugs, manual

Frequently Asked Questions - Elements Door GIGASET

How to install the Elements Door sensor?

Fix the sensor on a door or window using the included double-sided adhesive tape or screws. Make sure the surface is clean, dry, and grease-free. Optimal adhesion is achieved after 48 hours. Follow the recommended location in the 'Getting Started' guide.

Which battery should be used for the sensor?

Use a primary lithium battery 3.0 V type CR123A or CR17345. Do not use rechargeable batteries.

What is the range of the sensor?

The radio range is up to 50 m indoors and up to 300 m outdoors (without obstacles).

Can the sensor be used outdoors?

No, the sensor is designed for dry indoor use only. It is not protected against water splashes.

What to do if the sensor comes into contact with liquid?

Disconnect the power and remove the battery. Let the liquid drain, dry it with an absorbent cloth, then place the device in a warm, dry place for at least 72 hours before turning it on again.

How to clean the sensor?

Wipe it with a damp or antistatic cloth. Do not use solvents, microfiber cloth, or a dry cloth (risk of static discharge).

Does the sensor work without the Gigaset Elements pack?

No, the sensor requires the Gigaset Elements security pack (hub) to operate and communicate with the app.

What is the warranty period?

The warranty is 24 months on manufacturing and material defects. Wear parts (keypads, housings) are warranted for 6 months. Batteries are not covered.

Can I reuse the adhesive tape after removal?

No, the adhesive tape is for single use only. For reassembly, use only the tapes provided by Gigaset.

What to do if the sensor does not connect?

Check that the Gigaset Elements security pack is installed and turned on. Ensure the sensor battery is inserted correctly. Consult the 'Getting Started' guide for pairing. If the problem persists, contact customer service via www.gigaset-elements.fr/contact.

USER MANUAL Elements Door GIGASET

Abstract geometric shapes including a circle, square, star, triangle, and donut (no text or symbols)

Gigaset elements

Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.

Copyright (c) 2001-2003, Adam Dunkels.

Copyright (c) 2002-2003, Adam Dunkels.

Copyright (c) 2004, 2008, Swedish Institute of Computer Science.

Copyright (c) 2004, Adam Dunkels and the Swedish Institute of Computer Science.

Copyright (c) 2004, Swedish Institute of Computer Science.

Copyright (c) 2005, Swedish Institute of Computer Science.

Copyright (c) 2006, Swedish Institute of Computer Science.

Copyright (c) 2007, Swedish Institute of Computer Science.

Copyright (c) 2008, Swedish Institute of Computer Science.

Copyright (c) 2009, Swedish Institute of Computer Science.

Copyright (c) 2010, Swedish Institute of Computer Science.

Copyright (c) 2011, Swedish Institute of Computer Science.

Copyright (C) by RTX A/S, Denmark.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Newlib:

Copyright (c) 1990 Regents of the University of California.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.

Copyright (c) 2001-2003, Adam Dunkels.

Copyright (c) 2002-2003, Adam Dunkels.

Copyright (c) 2004, 2008, Swedish Institute of Computer Science.

Copyright (c) 2004, Adam Dunkels and the Swedish Institute of Computer Science.

Copyright (c) 2004, Swedish Institute of Computer Science.

Copyright (c) 2005, Swedish Institute of Computer Science.

Copyright (c) 2006, Swedish Institute of Computer Science.

Copyright (c) 2007, Swedish Institute of Computer Science.

Copyright (c) 2008, Swedish Institute of Computer Science.

Copyright (c) 2009, Swedish Institute of Computer Science.

Copyright (c) 2010, Swedish Institute of Computer Science.

Copyright (c) 2011, Swedish Institute of Computer Science.

Copyright (C) by RTX A/S, Denmark.

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name of the author may not be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Abstract geometric shapes including circles, triangles, stars, and a rounded rectangle (no text or symbols)

Gigaset elements

A31008-N2511-N101-3-7743

Issued by

Gigaset elements GmbH