ZeBuds Lite - Smartwatch MYKRONOZ - Free user manual and instructions

USER MANUAL ZeBuds Lite MYKRONOZ

RIGHT EARBUD OVERVIEWCHARGING Before the first time use, make sure to fully charge ZeBuds Lite inside their charging box with the USB-C cable for about 2 hours. ZeBuds Lite and its charging case will reach maximum battery capacity in order to provide you with up to 20 hours playtime. ZeBuds Lite can deliver about 4 hours of battery life. When reaching low battery level, you will hear an audio indication in your earbuds inviting you to put them back in the charging case to recharge them. It will take about 90 minutes to fully charge your earbuds in the charging case. Once the charging case is fully charged, you can recharge your earbuds up to 4 times until it reaches low battery.LED INFORMATION There are 3 LED indicators in the charging case to indicate its built-in battery level.

3 LEDs ON = between 75% and 100%

2 LEDs ON = between 25% and 75%

1 LED ON = below 25% and requires your attention

HOW TO PAIR WITH ANOTHER SMARTPHONE

In order to pair your ZeBuds Lite with your smartphone, please follow the below instructions:

• Search for the MyKronoz App in the App store or Google Play store, download and install the App on your mobile device.

• Open the MyKronoz App on your mobile device. Sign up if you are a new member or login with your existing account.

is enabled on your mobile smartphone.

• Then follow the on-screen instructions.

• When your ZeBuds Lite are successfully paired, you will be notified on your mobile device’s screen and white LED on either earbud will stay solid state for one second then turn o.

• You’re now ready to enjoy your new ZeBuds Lite. Note: Thanks to the MyKronoz mobile app you’ll also enjoy new features and performance improvements. Android user: To pair your ZeBuds Lite with another phone, please unpair ZeBuds Lite from MyKronoz mobile app first, then perform a new pairing procedure with another smartphone as mentioned above. iOS user: To pair your ZeBuds Lite with another phone, please forget ZeBuds Lite from your iOS device’s Bluetooth list, then perform a new pairing procedure with another smartphone as mentioned above.OPERATIONS Play / Pause Next track Voice control Answer call Reject call End call

use either earbud to conduct these operations

5.0 - Dimensions: 17.8*43*19mm - Weight: 5 g each - Battery type: 40 mAh

Battery life: up to 4h of playtime - Charging time: 20 min for 1h listening / 1h30 full charge Dual microphone - Speaker impedance: 32Ω - Frequency: 20Hz/20KHz - IPX4 water resistant - Operating temperature: -10°C to +60°C

CHARGING CASE: Dimensions: 46.6*22.5*56.5mm - Weight: 40 g - Battery type: 400 mAh - Battery life: 16h of extra playtime - Charging time: 1h30 for full charge - USB-C charging port Compatible with iOS and Android devices. 1 year international warranty.

ZeBuds Lite with charging case

To prevent possible hearing damage, do not listen at high volume levels for long periods of time.

Use of earbuds will prevent your ability to hear other sounds.

Use your earbuds with caution when engaging in any activity that requires your full attention.

This package contains small parts that may be hazardous to children and should be kept out of reach from children. This product is not a toy never allow children to play with this product.

Never try to dismantle the product yourself, or push objects of any kind into the products, as this may cause short circuits, which could result in a fire or electric shock.

None of the components can be replaced or repaired by users. Please contact customer service for any assistance.

Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you.• Do NOT submerge the earbuds in water.

Do NOT expose the earbuds to moving water (e.g., from a faucet, etc.).

Do NOT wear the earbuds while showering or bathing, or when participating in water sports, e.g., swimming, waterskiing, surfing, etc.

Leaving the product in hot or cold places, such as in a closed car in the summer and winter conditions, will reduce the capacity and lifetime of the earbuds.

Read all the instructions before using the charging case.

Do not expose charging case to water, rain, liquids or snow.

Use of a power supply or charger that is not recommended may result in a risk of fire or injury.

Do not use the charging case in excess of its output range.INFORMATIONS DE SÉCURITÉ

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTIONS Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

Consult the dealer or an experienced radio/ TV technician for help.

FCC ID: 2AA7D-ZEBDSLERF EXPOSURE STATEMENTS

This equipment complies with FCC radiation exposure requirement set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.

This device complies with the ISED RSS-102 RF exposure requirement set forth for an uncontrolled environment and are safe for intended operation as described in this manual