K5693 - Watch Calypso - Free user manual and instructions

Product type	Watch
Brand	Calypso
Model	K5693
Standard display	Hours, minutes, month, date, day of week, PM
Functions	Alarm, stopwatch with lap measurement, hourly chime, 12/24-hour selector, second time zone, timer
Backlight	Electroluminescent light (EL)
Accuracy	±30 seconds per month at 25°C
Operating temperature	10°C to 40°C
Power supply	Button cell battery
Care and cleaning	Clean with a soft cloth and clean water only. Avoid chemicals, especially soap.
Shock resistance	Designed to withstand shocks from normal use, avoid strong impacts
Water resistance	Do not use underwater or while swimming. Avoid pressing the buttons in water.
Safety	Do not open the case or remove the back cover. In case of condensation, have the case checked.
Repairability	Do not attempt to open. At end of life, selective collection WEEE.
Warranty / Recycling	Selective collection at approved points of sale or authorized collection points.

Frequently Asked Questions - K5693 Calypso

Why is the backlight of my watch less bright than before?

The backlight uses an electroluminescent (EL) technology that tends to lose brightness after very long use. This is a normal phenomenon.

How do I set the time and date on the Calypso K5693 watch?

Use the SET and MODE buttons to navigate and adjust settings. Refer to the manual for detailed instructions.

How do I use the stopwatch function?

The watch has a stopwatch function with lap measurement. Use the dedicated buttons to start, stop, and reset.

What to do if condensation appears inside the watch?

Water or condensation inside can corrode electronic components. Have the case checked by a professional immediately.

Can I swim or shower with this watch?

No, this watch is not waterproof. Avoid any contact with water and do not press the buttons underwater.

How do I clean my Calypso K5693 watch?

Clean it with a soft cloth and clean water only. Never use chemicals, especially soap.

What is the accuracy of this watch?

At normal temperature (25°C), the accuracy is ±30 seconds per month.

Can I change the battery myself?

It is not recommended to open the case. Entrust the battery replacement to a professional watchmaker.

How do I activate the alarm and hourly chime?

The watch has an alarm function with sound signal and an hourly chime. Use the buttons to set them according to the manual.

What to do if the watch stops suddenly?

This may indicate a worn-out battery. Have the battery replaced by a professional. Do not attempt to open the case.

USER MANUAL K5693 Calypso

3. HOW TO DISPLAY CALENDAR

eannnnnne

4. HOW TO SET NORMAL TIME

e

5. HOW TO SET ALARM TIME

6. HOW TO USE ALARM AND CHIME DISPLAY

en ennnnne

22

23

Ennne

7. HOW TO USE THE CHRONOGRAPH

eannnnnne

NORMAL TIME CHRONOGRAPH START RUNNING STOP RESET NORMAL TIME

E

BEFORE 30 MINUTES
MINUTES

R 30 MINUTES
HOURS

FIRST LAP
READ

LAP
SECOND LAP
COUNTING

SECOND LAP
BEAL

LAST LAP
COUNTING

LAST LAP
READ

STOP TIME

24

25

8. HOW TO USE TIMER

E

SET TIMER

NORMAL TIME TIMER SET HOURS +1 HOUR SET MINUTES +1 MINUTE SET SECONDS +1 SECOND

eannnnnne

9. HOW TO SET SECOND TIME ZONE

10. HOW TO USE EL LIGHT

28

NOTE:

1) The backlight of the watch employs an electro-luminescent (EL) light, watch tends to lose illuminating power after very long use.
2) The illumination provided by backlight may be hard to see when viewed under direct sunlight.

29

11. CARE OF YOUR WATCH

1) This watch contains precise electronic components. Never attempt to open the case or remove the back cover.
2) Do not operate push buttons below the surface of the water when swimming or diving.
3) Should water or condensation appear in the watch, immediately have the watch checked. Water can corrode electronic parts inside the case.
4) Avoid severing impact: The watch is designed to with stand impact under normal use. It is inadvisable to subject it to severe impact of rough usage or drops onto hard surfaces.
5) Avoid exposing the watch to temperature extremes.
6) Clean the watch with a soft cloth and clean water only. Avoid using chemicals, especially soap.
7) Keep your watch away from the conditions of strong electric field and static electricity.

12. FEATURES AND SPECIFICATIONS

1) Standard display mode: Hour, minutes, seconds, month, day of week.
2)Function:

• Month, date AM/PM and Electro-Luminiscent light.ll
• Alarm function with buzzer signal output.
  Chronograph function with lap operation.
• Hourly chime.II
  12/24 hour format switch option.1
  Timer.1
  Second time zone.

3) Accuracy at normal temperature (25^)± 30 seconds a month.
4) Normal operating temperature range: 10^ - 40^

By virtue of the regulations pursuant to the handling of waste products deriving from electronic and electrical equipment, end of lifecycle watch making products must be selectively collected for processing. You may therefore

dispose of your quartz watch making products at any of our retail outlets or any other authorized collection point. The selective collection, processing, rating and recycling of these products helps contribute to safeguarding the environment and protecting our health.

1.AFFICHAGE NORMALE ET BOUTON D'UTILISATION

2.COMMENT CHANGER LE MODE D'AFFICHAGE

3.COMMENT AFFICHER LE MOIS, LA DATE

HEURE NORMALE CHRONOMETRE ALARME

DEUXIEME ZONE D'HEURE MINUTEUR

34

HEURE NORMALE MOIS DATE

35

4.COMMENT REGLER L'HEURE NORMALE

5.COMMENT RÉGLER L'ALARME

6. COMMENT UTILISER L'AFFICHAGE ALARMÉ ET CARILLON

38

39

7.COMMENT UTILISER LE CHRONOMETRE

AVANT 30 MINUTES A

MINUTES SECONDES

$ 30 MINUTES

HEURES

IRE 1-TEMPS INTERMEDIAE

FONCTION TEMPS INTERMEDIAIRE

2**TEMPS INTERMEDIAIRE COMPTE

LIRE 2-TEMPS INTERMEDIARIES

DERNIRER CHRONOMETRE COMPTE

DERINER CHRONOMETRE

INDICATION DERNIRER CHRONOMETRE

8. POUR UTILISER LE MINUTEUR DU COMPTE A REBOURS

POUR REGLER LE MINUTEUR DE COMPTE A REBOURS

9.COMMENT REGLER L'HEURE D'UNE DEUXIEME ZONE

10. COMMENT ALLUMER LA LUMIERÉ ELECTRO-LUMINISCENTE

44

NOTE: