SFW123GSC - Safe SentrySafe - Free user manual and instructions

Technical Features	Fireproof and waterproof safe, external dimensions: 38.1 x 35.6 x 30.5 cm, internal dimensions: 30.5 x 24.1 x 22.9 cm, weight: 22.7 kg.
Storage Capacity	Capacity of 0.6 cubic feet, ideal for documents, jewelry, and valuables.
Locking System	Digital lock with 6-digit code, emergency key included.
Fire Protection	Fire resistant up to 60 minutes at 9276C (17006F).
Water Protection	Water resistant up to 24 hours at a depth of 30 cm.
Usage	Designed for home or professional use, easy to install in a closet or under a desk.
Maintenance	Regularly check the locking mechanism and replace batteries if necessary.
Warranty	Limited 1-year warranty.
General Information	Recommended for protecting important documents, valuables, and items sensitive to water and fire.

Frequently Asked Questions - SFW123GSC SentrySafe

How do I reset the code on my SentrySafe SFW123GSC?

To reset the code, use the provided security key to unlock the safe. Then, follow the instructions in the user manual to change the code.

What should I do if I forget the code to my safe?

If you forget the code, use the emergency key to open the safe. Once open, you can reset the code according to the manual instructions.

Is the safe fire and water resistant?

Yes, the SentrySafe SFW123GSC is designed to withstand fires up to 17006F (9276C) for 60 minutes and water up to 12 inches for 72 hours.

How do I install my SFW123GSC safe?

For installation, choose a secure and stable location. Use the mounting holes on the back of the safe to secure it to the floor or wall according to the manual instructions.

Can I change the battery on my SentrySafe SFW123GSC?

Yes, the battery can be changed. Open the battery panel located on the back of the safe and replace the old battery with a new 9V battery.

What should I do if my safe won\'t open?

First, check that the battery is charged. If the problem persists, make sure you are entering the correct code or using the key. If the safe remains locked, contact SentrySafe customer service.

Can the SFW123GSC be used outdoors?

No, it is recommended to use the SFW123GSC indoors to avoid exposure to outdoor elements that could damage the safe.

What is the storage capacity of the SentrySafe SFW123GSC?

The SFW123GSC has an internal capacity of 0.9 cubic feet, providing enough space for documents and valuables.

How do I clean my safe?

Use a soft, dry cloth to clean the outside of the safe. Avoid harsh chemicals that can damage the finish.

Where can I find the user manual?

The user manual can be downloaded from the official SentrySafe website in the products section or by contacting their customer service.

USER MANUAL SFW123GSC SentrySafe

If you experience any problems or challenges with your safe, please contact us. Many issues can be resolved quickly.

IMPORTANT

Fire-Safe® Owner's Manual

Close-up of a black SentrySafe safe with key and keypad (no visible text or symbols on the main body)

Front view of a black security safe with a circular dial and 'SentrySafe' branding (no additional text or symbols visible)

Black square security safe with a circular dial and key inserted, no visible text or symbols on the main body.

Exterior view of a black SentrySafe home security device with a rotary dial and keypad (no visible text or symbols on the device itself)

WARNING

Gun warning

This product is not intended for the secure storage of all materials. Items such as firearms, other weapons, combustible materials, or medication should NOT be stored in this unit.

NOTICE

Do NOT store delicate items directly in your safe.

SentrySafe products which offer fire protection have a proprietary insulation that has a high moisture content. In addition, the SentrySafe advanced safes close airtight to offer water resistance, which may also cause moisture to accumulate inside your safe. The desiccant packet included in your safe during shipment should be left in your safe. DO NOT DISCARD IT. It is intended to help absorb moisture which may accumulate inside your safe. Please open your unit once every two weeks to avoid moisture accumulation.

If you choose to store delicate items such as jewelry with working parts, watches, stamps, or photos in your safe, we recommend putting them in an air-tight container, prior to placing them in the safe for storage.

NOTE: SentrySafe will not be responsible for any damage or loss of items placed in the unit due to moisture.

Do NOT store pearls in this safe.

In the event of a fire, potential damage to delicate pearls occurs at temperatures much lower than the 350°F interior performance measure which the UL classification performance standard indicated guarantees. Therefore, DO NOT store pearls in your SentrySafe product.

Do NOT store computer disks, audio-visual cassettes or photo negatives.

This product is not intended to protect computer floppy or diskettes, cartridges and tapes, audio or video cassettes or photo negatives.

Your safe is only part of your total security protection.

SentrySafe recommends that you store your safe in closets, offices, basements, bedrooms and any other locations that are convenient for you but out of direct line of sight from prying eyes. The location of the safe does not affect the safe's ability to protect your valuables inside.

Table of Contents

English

Warnings 2

Registration 3

Mechanical Combination Lock 4-5

Programmable Electronic Lock 6-9

Operating the Light 9

Operating Sound Features 10

Bolting Down Your Safe 11-12

Troubleshooting 13

Replacement & Fire Specifications....14

Customer Service....15

Français 17

Español 33

IMPORTANT

If you experience any problems or challenges with your safe, please contact us. Many issues can be resolved quickly without the product being returned.

Our customer care team is available at 1-800-828-1438 to answer your questions.

Registration:

www.registermysafe.com

Reasons to register

By registering your SentrySafe product you can easily retrieve forgotten codes and combinations.

By registering your SentrySafe product you can be sure that in the unfortunate circumstance of a fire you will be guaranteed your replacement safe (provided official paperwork).

Close-up of a circular mechanical dial with measurement markings (no readable text or symbols)

NOTE: • Store combination (and keys if equipped) in a secure location (other than in the safe).

• Combination can not be changed.

Preparing your safe for first time use

1

Cropped image showing a text input field with an arrow pointing to a symbol, likely from a software interface or command.

Ensure any shipping screws have been removed. Located on the inside of the door.

NOTE: Your unit may or may not have a shipping screw..

- DO NOT RETURN! Questions or concerns, call us at 1-800-828-1438.

2

M100TEST SN100TEST01* 10-22-33 RLR 2075

Find your combination on the back of this owner's manual.

Keys are located inside your safe. Be sure to remove them before locking your safe.

WARNING

Test your combination several times before putting valuables inside.

Unlocking your safe

1

Close-up of a mechanical switch or dial with a metallic handle and central hub (no visible text or symbols)

FOR DUAL KEY/COMBINATION LOCKS ONLY, insert key into the lock, turn to the 'unlocked' position, then remove the key.

This is a secondary locking feature not an override key.

2

Close-up of a camera lens with a circular dial and an arrow indicating rotation (no text or symbols)

Rotate dial to '0', then rotate right (clockwise) passing '0' three times, continue rotating until you reach the first number in your combination.

3

Close-up of a circular mechanical dial with measurement markings and an arrow pointing to the dial (no readable text or symbols)

Rotate dial to the left (counterclockwise). Go PAST the second number of your combination ONCE and stop the SECOND time the dial reaches the number.

Close-up of a black circular device dial with measurement markings and an arrow pointing to the top-left corner (no visible text or symbols)

Rotate the dial to the right (clockwise), stop when you reach the third number in your combination.

Close-up of a mechanical knob with a circular dial and a downward arrow indicator (no text or symbols)

Rotate the handle downward to open the door.

This may take a limited amount of force if you have a water-resistant safe.

NOTE: • Make sure the handle is rotated all the way up in the horizontal position before unlocking the safe.
- If the door does not open easily, repeat steps 1-5.
- If you exert too much force on the handle, the handle will move without moving the bolts. If this happens, you will hear a 'click.' DO NOT be alarmed. This feature is designed to protect the bolts from being overpowered by force. If this occurs, simply exert force in the opposite direction (lifting up) until the handles 'clicks' back into place and repeat steps 1-5 to open your safe.

Locking your safe

Close-up of a black mechanical knob with a circular dial and an arrow pointing upward (no text or symbols)

Close the door and pull the handle upward until the handle is horizontal.

For water-resistant units, additional pressure to the front, left side of the door may need to be applied prior to rotating the handle.

Close-up of a black circular mechanical dial with measurement markings and an arrow indicating rotation (no text or symbols visible)

Spin the dial at least 2x to the right (clockwise).

Close-up of a mechanical knob or dial with a black handle and metallic ring (no visible text or symbols)

FOR DUAL KEY/COMBINATION LOCKS ONLY, insert key into the lock, turn to the 'locked' position, then remove the key.

Close-up of a black handheld device with a circular keypad and control buttons (no visible text or symbols)

NOTE: • Store code (and keys if equipped) in a secure location (other than in the safe).

Preparing your safe for first time use

1

Close-up of a computer monitor with a label and an arrow pointing to it (no readable text or symbols)

Ensure any shipping screws have been removed. Located on the inside of the door.

NOTE: Your unit may or may not have a shipping screw.

- DO NOT RETURN! Questions or concerns, call us at 1-800-828-1438.

2

Close-up of a black rotary dial with control buttons and an arrow pointing to a battery pack (no visible text or symbols)

A Slide out the battery drawer on the side of the keypad.
B Insert 4 AAA alkaline batteries (not included).

NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery. Do not mix old and new batteries. Do not mix alkaline and standard batteries.

Slide battery drawer back into keypad.

3

M100TEST SN100TEST01* 12345

Find your code on the back of this owner's manual.

Keys are located inside your safe. Be sure to remove them before locking your safe.

WARNING

Test your code several times before putting valuables inside.

Unlocking your safe

1

Close-up of a black key inserted into a circular device with a grid of square buttons (no visible text or symbols)

FOR DUAL KEY/ELECTRONIC LOCKS ONLY, insert key into the lock, turn to the 'unlocked' position to open the safe, then remove the key.

This is a secondary locking feature not an override key.

Close-up of a black rotary dial with a numeric keypad (no visible text or symbols)

A Enter the 5 digit factory code found on the back of the owner's manual.

NOTE: You may have to lift the handle while entering the combination.

B A green light will indicate the code is correct. You will have 4 seconds to turn the handle to unlock your safe.

Close-up of a black handheld device with a circular dial and a downward arrow indicator (no text or symbols)

Rotate the handle downward to open the door.

This may take a limited amount of force if you have a water-resistant safe.

NOTE: • Make sure the handle is rotated all the way up in the horizontal position before unlocking the safe.
- If you exert too much force on the handle, the handle will move without moving the bolts. If not when this happens, you will hear a 'click.' DO NOT be alarmed. This feature is designed to protect the bolts from being over powered by force. If this occurs, simply exert force in the opposite direction (lifting up) until the handles 'clicks' back into place and repeat steps 1-3 to open your safe.
- Delay mode will occur if three consecutive invalid entries have been tried. Red LED will blink on and off to let you know the safe is in delay mode. This will cause the system to shutdown for two minutes. DO NOT remove the batteries to restart the system it will only increase the length of time for the system shutdown.

Locking your safe

Close-up of a black hand holding a digital doorbell with a white arrow pointing upward (no text or symbols visible)

Close the door and pull the handle upward until the handle is horizontal.

For water-resistant units, additional pressure to the front, left side of the door may need to be applied prior to rotating the handle.

Close-up of a black and white object with a circular dial and key, no visible text or symbols.

FOR DUAL KEY/ELECTRONIC LOCKS ONLY, insert key into the lock, turn to the 'locked' position, then remove the key.

NOTE: If your safe does not appear to be working properly, please check to make sure you are using NEW alkaline batteries before contacting SentrySafe Customer Service.

Programming information

Close-up of a black circular device with a keypad and numeric keypad (no visible text or symbols)

Three code options:

Factory code:

The safe will ALWAYS unlock using this 5 digit code (found on the back of the owner's manual). This code cannot be deleted.

User code:

A 5 digit programmable code of your choosing that can be changed or deleted.

Secondary code:

A second 5 digit programmable code of your choosing that can be changed or deleted. Can only be programmed after a user code has been activated.

NOTE: • The "C" key is a clear key. This can be used at anytime to clear the system and return to standby mode – unless you are in delay mode (3 consecutive invalid entries).
- The 5 digit factory code cannot be deleted. However, you may add and delete additional codes.

This safe can store up to three codes at one time. One factory code and two additional programmable codes.

Programming the user code

To ADD a user code:

1 Press the "P" key.
2 Enter the 5 digit factory code found on the back of your owner's manual.
3 The light will flash green and then you will have five seconds to enter your own personal 5 digit user code.

To DELETE a user code:

1 Press the "P" key.
2 Enter the 5 digit factory code.
3 Enter 0,0,0,0,0.

NOTE: • The electronic lock will NOT indicate that it has deleted the user code – please test the code to make sure it has been deleted.

Programming the secondary code

To ADD a secondary code:

1 Press the "P" key two times.
2 Enter the 5 digit user code previously programmed.

3 The light will flash green and then you will have five seconds to enter your own personal 5 digit secondary code.

To DELETE a secondary code:

1 Press the "P" key two times.
2 Enter the 5 digit user code.
3 Enter 0,0,0,0,0.

NOTE: • The electronic lock will NOT indicate that it has deleted the secondary code – please test the code to make sure it has been deleted.

How to operate the light

The safe you have purchased may include a light. This is a long-lasting LED light. Not all safes include a light.

Close-up of a dark curtain with vertical streaks and two small bright spots, possibly from a window or ceiling (no text or symbols visible)

The batteries that operate the keypad are the same batteries that operate the light. If the light in your unit does not turn on, please change your batteries. Refer to page 6 to change the batteries.

The light will turn on every time you enter your code and will remain on for 30 seconds. The light duration has three options – off, 30 seconds, and 60 seconds.

To turn the light off:

1 Press the "0" button.
2 Press the "P" button.
3 Press the "3" button.

To turn the light on for 30 seconds:

1 Press the "0" button.
2 Press the "P" button.
3 Press the "4" button.

To turn the light on for 60 seconds:

1 Press the "0" button.
2 Press the "P" button.
3 Press the "5" button.

NOTE: • If the light duration is 60 seconds, the battery life will be reduced at a faster rate.

Operating sound features

For Programmable Electronic Lock Only

The tones of the key pad may be turned on and off depending on user preference.

Turn sound off:

1 Press "O".
2 Press "P" key.
3 Press "2".

Turn sound on:

1 Press "O".
2 Press "P" key.
3 Press "1".

Bolt-down instructions

NOTICE

Product is not water resistant once it is bolted down. The ETL verified water resistance claim applies to product prior to the application of a bolt-down kit.

Bolt-down kit contents (in select models only):

• 2 lag screws
• 2 washers
  • 2 masonry anchors

Assorted metal screws and fasteners arranged on a plain surface (no text or symbols visible)

Tools needed to bolt safe to the floor:

• Drill
• Wrench
• ^7/_16 " (11 mm) drill bit – for drilling into the safe
• ^9/_32 " (7.2 mm) drill bit – for drilling into a wood floor
• 3/8'' (9.5 mm) drill bit – for drilling into a masonry floor

Warning: • DO NOT drill from any location inside the safe.

• DO NOT bolt through the walls.

1 Tip the safe onto its right side (door hinges horizontal with the floor).
Unlock the safe and open the door. Look to the bottom of the

Line drawing of hands holding two tools with circular components (no text or symbols)

safe for two indentations on the feet in opposite corners. Using the 716 " (11 mm) bit; drill a hole through each indentation perpendicular to the bottom of the safe. DO NOT drill from any location inside the safe.

3 Tip the safe upright, place the safe in the desired location and open the door.
4 Use a screw or pencil to mark the floor through both holes.

Bolt-down instructions... continued

5 Move the safe aside to clear both marked spots for drilling.
Drill into the floor:

(64 mm) deep in each ma

A For wood: Using the 9/32 " drill bit, drill a hole 2^1/2 "

(64 mm) deep in each marked spot.

B For masonry: Using the 38 " drill bit, drill a hole 212 "

(64 mm) deep in each marked spot. Install a masonry anchor in each hole.

7 Replace the safe in the desired position, with the holes in the safe aligned with those in the floor.
8 Securing the safe:

then through the safe and the wrench.

A For wood: Pass each lag screw through a washer,

B For masonry: Pass each lag screw through a washer, then through the safe and into a masonry anchor.

Tighten with the wrench. Place masonry anchors into the holes in the floor.

NOTE: • The safe should not be bolted to a wall, this will compromise the fire rating. Drill holes through the feet only. DO NOT drill through the back or sides.

- Bolting/unbolting the unit is at the consumer's expense and discretion.

- SentrySafe is not responsible for any costs incurred if the unit is to be replaced.

Not all SentrySafe products come with a bolt-down kit.

Please go to www.sentrysafe.com to learn more about the recommended hardware for your safe.

The Problem: Why it is Happening: The Solution:
The door will not lock.	1. Shipping screw is in place.2. Confirm that there is no obstruction in the door.3. Bolted down incorrectly.	1. Remove the screw on the back inside of the door.2. Remove all items and accessories from inside the safe. If this resolves the issue, re-set the accessories and organize items to properly fit.3. See pages 11 for proper bolt-down instructions.
The handle is not in the horizontal position when the safe is locked.	The clutch mechanism has been engaged.	Rotate the handle up or down until it clicks into the horizontal position.
Cannot open door after inputting the combination or electronic code.	1. Safe doors equipped with a water-resistant gasket may initially be tight.2. Key lock is in the locked position. (select models only)	1. Hold the handle up while inputting the code or dialing the combination and then pull down on the handle..2. If your safe is equipped with a key lock ensure that the key is in the unlocked position. (select models only)
The dial does not turn.	1. Shipping screw is still in place.2. Locking bolts are not fully extended.	1. Remove the screw from the back of the door.2. Ensure the handle is in the horizontal position.
Red indicator light blinks three times and there are three beeps.	An incorrect code has been entered.	Verify code and re-enter. If the programmable code you are using doesn't work then use the factory code. If successful re-program your programmable code.
Red indicator light blinks five times and there are five beeps.	Keypad communication error. Please call our Customer Service center.
Red indicator light blinks once and there is one beep.	Program button is pressed out of sequence.-or-5 seconds has lapsed between button entries.	Start over.
Red indicator light is blinking.	An incorrect code has been entered three times and system has entered delay mode.	Wait two minutes and start over.
Yellow indicator light is on.	Battery power is low. -or- Battery may be the wrong type.	Replace with new alkaline batteries.

Limited Lifetime After-Fire Replacement Program

If this product is damaged by fire at any time while still owned by you, the original, registered owner (the original purchaser), Master Lock will either ship a replacement or provide a credit or refund equal to the purchase price paid, at Master Lock's own and sole discretion.

To be eligible for this Limited Lifetime After-Fire Replacement Program, the original purchaser must have registered the product within 30 days of purchase, online at www.registermysafe.com or using the card included with the product. Do not ship your product back to Master Lock.

To obtain service under the Limited Lifetime After-Fire Replacement Program, please contact Master Lock Customer Care by phone at 1-800-828-1438 or via www.sentrysafe.com. Do not ship your product back to Master Lock.

When contacting Master Lock Customer Care, you should have the following information available:

1) A description of the fire event; 2) unit model number; 3) serial number; 4) a photo of the burned unit; and 5) a copy of the report from the fire department, insurance or police.

THIS AFTER-FIRE REPLACEMENT PROGRAM IS LIMITED TO REPAIR OR REPLACEMENT ONLY. The limited warranty does not cover labor for removing, reinstalling or refinishing the product or part, or other materials removed, reinstalled or refinished in order to repair or replace the product or part. TO THE EXTENT PERMITTED BY LAW, MASTER LOCK DISCLAIMS ALL OTHER IMPLIED OR EXPRESS WARRANTIES INCLUDING ALL WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT ANY IMPLIED WARRANTIES MAY NONETHELESS EXIST BY OPERATION OF LAW, SUCH WARRANTIES ARE LIMITED TO THE DURATION PROVIDED BY LAW.

Fire specifications

Fire Endurance:

(UL Classified protection) Subjected to temperatures up to 1700^ F ( 927^ C) for a duration of 1 hour, the safe interior will remain below 350^ F ( 177^ C).

Explosion Hazard:

(UL Classified protection) Subjected to a flash fire in a 2000°F (1093°C) furnace for 30 minutes the unit will not explode or rupture.

Fire Impact:

(ETL Verified) After being heated to 1550^ F ( 843^ C) the safe is dropped 15 ft. (4.6 m) onto rubble, then cooled, inverted and reheated to 1550^ F ( 843^ C) for 30 minutes.

Data Protection:

(ETL Verified) 1 hour fire protection of CDs, DVDs, memory sticks and USB drives up to 1700°F (927°C). This product is NOT intended to protect computer floppy or 2¼" diskettes, cartridges, tapes, audio or video cassettes, or photo negatives. For fire-resistant storage of these materials, ask your retailer for the SentrySafe Fire-Safe® media storage products.

Customer Service

www.sentrysafe.com

Customer Service: 1-800-828-1438

137 Forest Hill Avenue, P.O. Box 927 Oak Creek, Wisconsin 53154

How to get replacement key/combo

Please go to our website www.sentrysafe.com to find the necessary replacement form. If you are unable to use a computer please call the number above for a copy of the replacement form.

How to order accessories

To optimize your safe's organization consider purchasing SentrySafe accessories for your safe. Available accessories include a locking drawer, tray, shelf, and file rack. For more items please go to the SentrySafe store at www.sentrysafe.com or call our customer service number 1-800-828-1438.

SentrySafe

Front view of a black SentrySafe home security box with keyhole and keypad (no visible text or symbols on main body)

Front view of a black Sentry Safe door with a circular dial and handle (no visible text or symbols on the main body)

Black square security safe with a key inserted, no visible text or symbols on the main body.

Exterior view of a black SentrySafe home security device with a rotary dial and keypad (no visible text or symbols on the device body)

AVERTISSEMENT

www.registermysafe.com

Close-up of a computer monitor with a label and an arrow pointing to it, indicating a location or navigation point.

Close-up of a mechanical switch or dial with metallic and black components (no visible text or symbols)

Close-up of a circular mechanical dial with measurement markings and an arrow indicating rotation (no text or symbols)

Close-up of a black circular dial with measurement markings and an arrow pointing to the dial (no text or symbols visible)

Close-up of a circular mechanical component with a white arrow indicating rotation (no text or symbols visible)

Close-up of a mechanical knob with a downward arrow indicator (no text or symbols)

Close-up of a black mechanical knob with a circular dial and an arrow pointing upward (no text or symbols)

Close-up of a black circular dial with measurement markings and an arrow pointing to the dial (no readable text or symbols)

Close-up of a mechanical component with a circular head and central hub (no visible text or symbols)

Close-up of a black handheld device with a circular dial and keypad (no visible text or symbols)

Close-up of a black rotary dial with keypad and battery pack, no visible text or symbols

Close-up of a black key inserted into a circular dial with visible numbers (no text or symbols)

Close-up of a black handheld phone with a circular dial and a handle, showing no visible text or symbols.

Close-up of a dark curtain with a vertical metallic grille and two small bright spots on the right side (no text or symbols visible)

Assorted metal fasteners including screws, bolts, and washers arranged on a plain surface (no text or symbols visible)

Line drawing of a hand using a tool to insert or install an open shelf (no text or symbols)

Simple line drawing of a rectangular frame with internal supports and measurement markings (no text or symbols)

Pure technical diagram of a mechanical or architectural component without any text, numbers, or symbols

137 Forest Hill Avenue, P.O. Box 927 Oak Creek, Wisconsin 53154

Front view of a black SentrySafe home security box with keyhole and keypad (no visible text or symbols on main body)

Front view of a black Sentry Safe door with a circular dial and handle (no visible text or symbols on the main body)

Black square security safe with a key inserted, no visible text or symbols on the main body.

Exterior view of a black SentrySafe home security device with a rotary dial and keypad (no visible text or symbols on the device body)

ADVERTENCIA

www.registermysafe.com

Close-up of a circular mechanical dial with measurement markings (no readable text or symbols)

Close-up of a device panel with a white arrow pointing to a labeled component and a small text box on the screen.

Close-up of a mechanical component with a central circular dial and metallic handle (no visible text or symbols)

Close-up of a circular mechanical dial with measurement markings and an arrow indicating rotation (no text or symbols)

Close-up of a circular mechanical dial with measurement markings and an arrow pointing to the dial (no text or symbols visible)

Close-up of a circular mechanical dial with measurement markings and an arrow indicating rotation (no text or symbols)

Close-up of a mechanical knob with a downward arrow indicator (no text or symbols)

Close-up of a black camera lens with an arrow pointing upward (no text or symbols visible)

Close-up of a camera lens dial with an arrow pointing to the left side (no text or symbols visible)

Close-up of a mechanical knob or dial with a black handle and metallic ring (no visible text or symbols)

Close-up of a black handheld device with a circular keypad and numeric keypad (no visible text or symbols)

Close-up of a black rotary dial with keypad and battery pack, no visible text or symbols

Close-up of a black and white handheld device with a keypad and key (no visible text or symbols)

Close-up of a black door lock with a white upward arrow pointing to it (no text or symbols visible)

quede horizontal.

Close-up of a black key inserted into a circular lock (no visible text or symbols)

Close-up of a black circular device with a keypad and numeric keypad (no visible text or symbols)

Close-up of a server rack with ventilation grilles and a door (no visible text or symbols)

Close-up of four metal fasteners and bolts arranged on a plain surface (no text or symbols visible)

Line drawing of two hands holding a small mechanical component with pins, no text or symbols present

Line drawing of a hand using a tool to cut or inspect the interior of a cabinet (no text or symbols)

Simple line drawing of a mechanical or architectural component with no text, numbers, or symbols

137 Forest Hill Avenue, P.O. Box 927 Oak Creek, Wisconsin 53154